looking for a work out case - Hero CDMA Accessories

im looking for a workout arm band for my cdma hero. all i have found is generic ones or ones for icrap. any help or suggestion would be appreciated.

ricersniper said:
im looking for a workout arm band for my cdma hero. all i have found is generic ones or ones for icrap. any help or suggestion would be appreciated.
Click to expand...
Click to collapse
+1
Searched Google for an hour last week and came up with nothing.
Hoping someone had better luck !

i got this for you

i hate myself but i found and bought one at wal-mart. it was 17 bucks. i had tried all the sporting goods and work out equipment places and nothing. finaly, as were are leaving the last place someone says check wal-mart they have them. i feel so dirty!!

ricersniper said:
i hate myself but i found and bought one at wal-mart. it was 17 bucks. i had tried all the sporting goods and work out equipment places and nothing. finaly, as were are leaving the last place someone says check wal-mart they have them. i feel so dirty!!
Click to expand...
Click to collapse
I found a pretty good one at Big 5 Sporting Goods

i got a silicone case off ebay and cut two slits in the back and fed a armband through. works good.
then, you can also wear it backwards with the speaker facing out if you dont wanna deal with headphones.
i bet you could also do it with one of those flexi cases off daydeal.com

I have this one
Works well, fits even with the silicone gel glove on. Also can easily use the screen while in the armband.
Hope that helps someone.

riggsandroid said:
I have this one
Works well, fits even with the silicone gel glove on. Also can easily use the screen while in the armband.
Hope that helps someone.
Click to expand...
Click to collapse
Yep, I have the exact same one. I had bought it for my old mogul and it worked fine. Didn't think I could be able to use the touch screen on the Hero but it reads my finger fine. Although the plastic had been stretched a little from the mogul and so it's a little loose inside but doesn't fall out or anything. Be sure to get the right size for your arm. I got the larger one since i've always had issues with armbands fitting my 24inch pythons. =)

QuiQNeZZ said:
Yep, I have the exact same one. I had bought it for my old mogul and it worked fine. Didn't think I could be able to use the touch screen on the Hero but it reads my finger fine. Although the plastic had been stretched a little from the mogul and so it's a little loose inside but doesn't fall out or anything. Be sure to get the right size for your arm. I got the larger one since i've always had issues with armbands fitting my 24inch pythons. =)
Click to expand...
Click to collapse
lol, you monster! are those registered?

Related

Best case for (roughly) £15 on expansys?

www.expansys.com
I have 2 free £15 vouchers, which would be the best option?
Thanks
Don't know what cases you are on about but the advice I would give you this:
If you intend to use the phone in the case all the time then the design that you should go for is one that leaves the whole face of the HD2 open to you otherwise you will have problems operating the phone.
Alternatively go for a case where you can take the phone out to use; however make sure the case completely holds the phone in securely when its in there.
SuperEtrader were selling a belt pouch where you could not even close the flap when the phone was in it. They claimed it was HD2 compatible.
Finally, having bought 5 cases now, you get what you pay for......
WB
I've got
http://www.expansys.com/d.aspx?i=190797
PDair Horizontal Pouch case...
Works pretty well.. magnetic clasp... with belt clip... good quality...
nutmegy said:
I've got
http://www.expansys.com/d.aspx?i=190797
PDair Horizontal Pouch case...
Works pretty well.. magnetic clasp... with belt clip... good quality...
Click to expand...
Click to collapse
i have just bought one of these for work. very good quality for the money. my only complaint is that the hard-buttons can sometimes get pressed and cause the fone to wake, depending on where you have it on you and what you are doing.
all-in-all, a good pouch.
drkmtr
Thanks
It would be nice if I could see a video of http://www.expansys.com/d.aspx?i=190797
http://www.youtube.com/watch?v=k5R_qBOEzCI
Wevenhuis said:
http://www.youtube.com/watch?v=k5R_qBOEzCI
Click to expand...
Click to collapse
Thanks, now I dont think Ill get it, I was hoping for something that the leo permanently stayed in and was accesible from
I was going toi to tell what I had ordered from Expansys and awaiting delivery for but I've just checked and the Mizu Shell - http://www.expansys.com/d.aspx?i=192254 is now discontinued and the and a Silicon Case for HTC HD2 http://www.expansys.fr/p.aspx?i=192270 is no loonger mentioned on the UK site (so I provided the link to the french.
So Im afraid that I can't help you.
cMMY69 said:
I was going toi to tell what I had ordered from Expansys and awaiting delivery for but I've just checked and the Mizu Shell - http://www.expansys.com/d.aspx?i=192254 is now discontinued and the and a Silicon Case for HTC HD2 http://www.expansys.fr/p.aspx?i=192270 is no loonger mentioned on the UK site (so I provided the link to the french.
So Im afraid that I can't help you.
Click to expand...
Click to collapse
Well that sucks....
Tell me how it is anyway will ya?
http://www.proporta.com/F02/PPF02P05.php?t_id=4862&t_mode=des
try this for a Pouch instead of a case? thinking of getting it. with the hd2 having similar dimensions to the iphone try some of the cases for that as their is millions of them
HD2 = 121 x 67 x 11 mm
Iphone 3G = 115.5 x 62.1 x 12.3 mm
Im looking for something which the phone constantly stays in, which can be opened via a flap like thing, which isnt bulky.
thanks though
[★] said:
Im looking for something which the phone constantly stays in, which can be opened via a flap like thing, which isnt bulky.
thanks though
Click to expand...
Click to collapse
do you mean like this see pics
gordofski said:
do you mean like this see pics
Click to expand...
Click to collapse
yeah thats pretty cool dont like the colour or material though, nice style though
case
http://www.cases.com/pf456.htm
The best

Old G1 sleeve case works great!

Upgraded from a G1 and found that the Nexus S fit perfectly into the sleeve case that came with the G1. The wife was jealous so I found a place selling through Amazon that has them for about $5. I ordered 2 since mine is pretty worn.
Just some added protection, maybe overkill. It is all plastic I figure this can only help. I'm not a big fan of most of the over the phone cases.
got the amazon link?
cheers
Sure, I didn't know if we could link outside of this site.
http://www.amazon.com/T-Mobile-HTC-...EQJ2/ref=sr_1_7?ie=UTF8&qid=1293042901&sr=8-7
If the link gets removed just search for: HTC G1 case
I'm considering getting this, but before I order, I was wondering if it would be possible for you to please post a few pics of the device inside of the G1 pouch.
Thanks in advance!
Weird, I thought the G1 sleeve was specifically designed and engineered, by the great folks at HTC, to only work with the G1?
The G1 one is to big, I tried it. But if u hold it in ur hand, the phone can slide out.. I use my nexus one pouch. Its a tight squeeze, but is just perfect, for now.
petep86 said:
The G1 one is to big, I tried it. But if u hold it in ur hand, the phone can slide out.. I use my nexus one pouch. Its a tight squeeze, but is just perfect, for now.
Click to expand...
Click to collapse
My G1 can slide out of the G1 pouch as well. The G1 is definitely thicker, but their overall length is pretty close. I'm sure there is some risk of it coming out easier than the G1.
It works for me, but YMMV.
Im temporarily using the g1 pouch on my nexus s and it works great.
the Nexus One pouch works pretty well also. I am using that temporarily until i get my phone skin next week.
willverduzco said:
I'm considering getting this, but before I order, I was wondering if it would be possible for you to please post a few pics of the device inside of the G1 pouch.
Thanks in advance!
Click to expand...
Click to collapse
I hadn't touched my G1 case in years but it is a great fit for the Nexus S.
i.imgur.com/Dxx9O.jpg
i.imgur.com/DRQT8.jpg
i.imgur.com/OWDqN.jpg
My links are broken because xda says as a "new user" I am not permitted to post outside links in my messages. That apparently includes images.
We got the new G1 cases yesterday and they are an even tighter fit because they have not been stretched out by a bulky G1.
The way I look at it, they were $5 each shipped. That's it...$5. Most of you just spent $530 on a phone but are worried about spending $5 on a sleeve.
It's not the end all be all, but it does the job well and like I think I mentioned before, I hate those protective cases attached to the unit.
I paid 580 bucks, so I'm sure I can afford the right sleeve n skin for my new phone. Not from my 3 year old phone...
Sent from my Nexus S using XDA App
Just ordered this. Can't wait to get it until something good from Seido comes out.
bogdi1988 said:
the Nexus One pouch works pretty well also. I am using that temporarily until i get my phone skin next week.
Click to expand...
Click to collapse
+1
I gave my N-1 to my wife and she has a case so I took the pouch. Great for just sliding in my pocket.
scrufy said:
+1
I gave my N-1 to my wife and she has a case so I took the pouch. Great for just sliding in my pocket.
Click to expand...
Click to collapse
Yup. Loving my N1 case
I was using my g1 case for my g2.... fit nicely
Sent from my T-Mobile G2 using XDA App
Anyone know where the Nexus One pouches can be found for a decent price?

[Q] Capdase Soft Jacket - Does it fit Tmobile HD2? UPDATE: Yes it does!

UPDATE
It arrived today!
The case fits nice and snug. Pictures forthcoming (may take me a week before I have time). It stretches a bit at the bottom but I believe that can be remedied with a little bit of creative sanding on the inside of the case. Honestly though, it's almost perfect without any modification.
I recommend
--------------------------------------------------------------------------------
I've tried searching and googling to no avail. Found one (questionable) post here from a while ago that states it fits but I want to make sure so....
Does the Capdase Soft Jacket 2 Xpose case fit the TMOUS HD2?
This is it btw: http://www.capdase.com/en/product5.php?cid=1&bid=5&mid=321&pid=5277
While I'm here.... any docks that fit the HD2 with a case on? (I know of plenty that fit it bare)
Probably so,i have the silver chrome metal one from capdase. It was marked for the euro version, but it fit my tmo hd2 just fine. So I would say your good to go.
mattfmartin said:
Probably so,i have the silver chrome metal one from capdase. It was marked for the euro version, but it fit my tmo hd2 just fine. So I would say your good to go.
Click to expand...
Click to collapse
Oh, you have the alumor? (this one: http://www.capdase.com/en/product5.php?cid=1&bid=5&mid=321&pid=5156) and it fits?
Please confirm because I will get that one then!
The dimensions of the HTC HD2 and the T-Mobile HD2 are slightly different.
Since all Capdase case are custom designed to fit the device it is intended for. The Soft Jacket 2 Xpose (HTC HD2) will not fit the T-Mobile HD2 perfectly.
Although the Leather cases should be okay.
rkarsk said:
Oh, you have the alumor? (this one: http://www.capdase.com/en/product5.php?cid=1&bid=5&mid=321&pid=5156) and it fits?
Please confirm because I will get that one then!
Click to expand...
Click to collapse
Yes I have the silver one. Fits prefect.
mattfmartin said:
Yes I have the silver one. Fits prefect.
Click to expand...
Click to collapse
I still prefer the Otterbox because it also protects the screen from impacts.
rkarsk said:
Oh, you have the alumor? (this one: http://www.capdase.com/en/product5.php?cid=1&bid=5&mid=321&pid=5156) and it fits?
Please confirm because I will get that one then!
Click to expand...
Click to collapse
I don't know, I just checked ebay and it specifically said:
"15 Feb 2011 - All colors are in limited stock
* IMPORTANT: This case is designed for the international version of HTC HD2 and DOESN'T FIT perfectly with the US T-Mobile version."
http://cgi.ebay.com/HOT-Capdase-Alu...434176?pt=PDA_Accessories&hash=item20b22098c0
Since the US version is larger, I don't see how it would work. But I believe the people who say it does. Just be advised...
stevedebi said:
I don't know, I just checked ebay and it specifically said:
"15 Feb 2011 - All colors are in limited stock
* IMPORTANT: This case is designed for the international version of HTC HD2 and DOESN'T FIT perfectly with the US T-Mobile version."
http://cgi.ebay.com/HOT-Capdase-Alu...434176?pt=PDA_Accessories&hash=item20b22098c0
Since the US version is larger, I don't see how it would work. But I believe the people who say it does. Just be advised...
Click to expand...
Click to collapse
I know it says that. I have a tmo us and it fits perfectly. Same thing with my case mate. They said "only for eu version" that one also fits.
mattfmartin said:
I know it says that. I have a tmo us and it fits perfectly. Same thing with my case mate. They said "only for eu version" that one also fits.
Click to expand...
Click to collapse
That is interesting. The Otterbox, for example, will most definitely NOT fit the T-Mobile HD2 in the International version. Difference in design, I suppose.
I think it just depends how much 'give' there is in the case. Otterbox isn't flexible at all, whereas as I understand it the alumor has rubber inside which can compress. Everyone please remember the tmous version is only about 2mm taller.
Anyways, I ordered the capdase softjacket. I'll see if it fits. I'm prepared to file down the inside ends in order to make it fit, I'm sure I could get 2mm out of that.
If it won't fit, i'm out $12, not a disaster.
I'll update with pics if it fits. (PS. if you're reading this 2 months from now and I haven't posted anything, PM me)
rkarsk, have you received the case yet? I'm interested to know if it will fit the t-mobile hd2.
It's only been about 3 days since my last post and I expect it to take several weeks (at least 2) to arrive.
It arrived today!
The case fits nice and snug. Pictures forthcoming (may take me a week before I have time). It stretches a bit at the bottom but I believe that can be remedied with a little bit of creative sanding on the inside of the case. Honestly though, it's almost perfect without any modification.
I recommend

[Open Thread] Thoughts On Otterbox Case For EVO Shift 4G

So I just wanted to start a thread for myself and anyone else who may want to read it
Basically anyone who has an otterbox case for the evo shift or has seen/used it or whatever just leave your opinions/reviews whatever. I am thinking of buying one so just wondering
I don't have one for the Shift but I've used an Otterbox on other devices and would recommend it if you have the slightest fear of damaging your handset.
I believe the last one I used was a Commuter which completely encased the handset and seemed to be able to take a hit. The back was too smooth for me so I had a little trouble re-learning how to hold it and the thickness of the handset increased significantly but overall it felt safe. Worth the extra money.
I am using the otterbox commuter case on my shift right now. I like it a lot. The fit and finish seems like it is completely a part of the phone. Only two complaints are:
1. If I try to move an icon from one hone screen to another, the piece covering the screen makes it difficult to move it to the "edge" - not a big deal, you learn to adjust.
2. When opening the slider, I hear a click sound, sounding like the little tabs holding the upper piece on are catching as it moves. Again, kinda not picky.
All in all, I think it is a great case and makes me worry a lot less about dropping my device. I would definitely recommend it.
Sent from my PG06100 using XDA App
Awesome seems like ill want to pick it up. I recently cracked the screen on my shift and made a few scuff marks so that's what seriously turned me to getting the case.
notsointeresting said:
Awesome seems like ill want to pick it up. I recently cracked the screen on my shift and made a few scuff marks so that's what seriously turned me to getting the case.
Click to expand...
Click to collapse
Tip for putting on the included screen protector...patience and a clean work surface! I couldn't get it to work well at first, then I ended up dropping it on the carpet. I was ready to give up on it until my wife took it from me and got it to work. So...if you have the patience of an ADHD kid on meth like I do...lol. It was my first screen protector too so. Anyways have fun!
Sent from my PG06100 using XDA App
definitely worth getting. i have the commuter series otterbox and it makes my phone look and feel like a beast. only thing that annoys me sometimes is the dust/lint that gets stuck to the rubber on the case, but i just blow it off.
zeke803 said:
2. When opening the slider, I hear a click sound, sounding like the little tabs holding the upper piece on are catching as it moves. Again, kinda not picky.
Click to expand...
Click to collapse
I haven't had a problem opening the slider at all.
I have one and love it! Top of the line case, looks good feels good and protects good! I would totally recommend it to anyone with a Shift!..
I use it on my shift, and have had them on two other phones. Like everyone else said, its a great case, and really does look like a part of the phone.
Sent from my PG06100 using Tapatalk
I'm now on my second otterbox after a free factory replacement, my only nit pics are the usb port cover doesn't stay closed, and it clicks everytime I open it, feels like one of the clips is catching....
Sent from my MiuiSpeedy
Just got the Commuter series and I'm a fan so far. Makes the phone feel more substantial and gives a better grip. The only issue was with the headphone and USB port covers, which didn't stay down. I just removed them, but DON'T Rip them off, it'll tear the rubber casing. Found that out on the USB port one so I cut the headphone one off. Either way makes the rubber a little loose around the port but not hugely annoying unless you're a perfectionist(which I can be). I'll just apply a little glue and seat it on the plastic frame.
Sent from my PG06100 using XDA App
Thanks for the answers guys! I'm definently going to pick one up in a couple days.
I do want to keep this thread open just so anyone can ask questions/leave other reviews for other people.
notsointeresting said:
Thanks for the answers guys! I'm definently going to pick one up in a couple days.
I do want to keep this thread open just so anyone can ask questions/leave other reviews for other people.
Click to expand...
Click to collapse
Got the Otter Box Commuter of Ebay for 24.97 free shipping. in retail box
wcherin said:
Got the Otter Box Commuter of Ebay for 24.97 free shipping. in retail box
Click to expand...
Click to collapse
That's great. The retail price from otterbox.com is $35 so thats a great buy. There's just something about ebay that I can't trust lol. That's me and my paranoia tho.
notsointeresting said:
That's great. The retail price from otterbox.com is $35 so thats a great buy. There's just something about ebay that I can't trust lol. That's me and my paranoia tho.
Click to expand...
Click to collapse
Check also Amazon I got mine for about the same price .. 20 something and It's safer than eBay (for me it is)
kbrn said:
Check also Amazon I got mine for about the same price .. 20 something and It's safer than eBay (for me it is)
Click to expand...
Click to collapse
Wow I found one for 22 on amazon thanks for the tip man
Once you have the front plate on the phone. How the hell do you get it off????
Sent from my HTC Sensation 4G
Xx12thANG3LxX said:
Once you have the front plate on the phone. How the hell do you get it off????
Sent from my HTC Sensation 4G
Click to expand...
Click to collapse
Its almost inpossible without breaking the case. I broke one of the clips in the process..... thank goodness for a warranty!
Sent from my MiuiSpeedy
Rooster85 said:
Its almost inpossible without breaking the case. I broke one of the clips in the process..... thank goodness for a warranty!
Sent from my MiuiSpeedy
Click to expand...
Click to collapse
I guess that's not technically a bad thing if the fronts hard to get off.
I just hope the back isn't the same when I get mine.
Is it?
notsointeresting said:
I guess that's not technically a bad thing if the fronts hard to get off.
I just hope the back isn't the same when I get mine.
Is it?
Click to expand...
Click to collapse
Nope I can confirm that, being really careful you can take the back without any problem..
I Think that the front parts being hard to take off it's a good thing.
Had mine for 2 or 3 months now
Bought it from Amazon for like $25 when they finally came available for the shift and had to wait a month before I got it in hand.
I'm not as impressed as i would be with the protection if it was a defender case. I had the black case with fake carbon fiber and belt clip before. The otterbox commuter is better then that one, by how much I'm not sure.
I dropped my phone about a month ago. I don't know if it just hit the right place of the case, and the back case came flying off the phone, the side clips where busted off, so the back case would not stay on any more.
I decided to call up otterbox and see if it was under warr. and if they would replace it. AMAZINGLY they said YES so they shipped me a new one for free i didn't even have to pay shipping. NICE. It was quick and easy I thought that was soooo cool. Because of that i will continue to buy otterbox, and recommend them to others.
In future i hope to buy defender cases (better protection) which means no more slider phones which i think i am ready for now that touch screens are so much better. All my old phones have been sliders with full keyboards from back in the day with my old HTC t-mobile MDA, which made me find this site.
Thats my 2 cents.

HTC Dot View Case

Guys im from the Netherlands and I can't vind this case anywere why?!!!?!
I want to have the case before my phone comes so I won't damage it that fast I know how I im.. ghehe
Rolando88 said:
Guys im from the Netherlands and I can't vind this case anywere why?!!!?!
I want to have the case before my phone comes so I won't damage it that fast I know how I im.. ghehe
Click to expand...
Click to collapse
I dont believe Sprint is selling it yet.
Go to Verizon.com thats where I ordered mine from.
It doesnt have a Verizon logo on it anywhere and works fine.
jayjam99 said:
I dont believe Sprint is selling it yet.
Go to Verizon.com thats where I ordered mine from.
It doesnt have a Verizon logo on it anywhere and works fine.
Click to expand...
Click to collapse
woo! thank you! bene looking all over for this, spend 5 more bucks on some cleaning wipes in order to get the free overnight shipping over 49.00 as the case is only 44.99..
penskyc said:
woo! thank you! bene looking all over for this, spend 5 more bucks on some cleaning wipes in order to get the free overnight shipping over 49.00 as the case is only 44.99..
Click to expand...
Click to collapse
im trying to get rid of mine if you want...
rahtrip said:
im trying to get rid of mine if you want...
Click to expand...
Click to collapse
How much to ship it to the UK?
johnboywilson said:
How much to ship it to the UK?
Click to expand...
Click to collapse
lemme see
rahtrip said:
lemme see
Click to expand...
Click to collapse
Thank You
rahtrip said:
im trying to get rid of mine if you want...
Click to expand...
Click to collapse
If you flip over the cover, does it work to support the phone as a kickstand in landscape?
Sent from my HTC One_M8 using Tapatalk
GermanGuy said:
If you flip over the cover, does it work to support the phone as a kickstand in landscape?
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Nope. It just slips and falls over.
Have had the case now for over a day and I do have a few thoughts about it. Purchased at a Verizon store last Sat(none in my area had it in stock apparently) for $48 with tax and 3 day shipping to my home. Color was the grey which I thought went really well with my gunmetal model. Upon putting it on the phone I felt that the fit was spot on. The back snapped right into place and the front flip cover rests evenly on the screen. Functionality of the case is second to none. It works as advertised ranging from being able to see time and current weather conditions to making and answering calls.
Some of the other things that will light up are any incoming text messages and you can also dismiss any alarms that you have set to go off by simply following the gestures. A big question that I had when I bought the case was whether or not that the music playback would be hindered. I'm very happy to report that audio playback was just as clear and precise as if the cover wasn't over the front of the device. Another plus is when you open the cover the phone automatically unlocks and the screen shuts off when the cover goes back on. Thus greatly eliminating use of the top mounted power button.
I felt the choice of the materials for the case were not bad. The rear material certainly doesn't feel like a cheap plastic by any means, but it's nowhere near as nice as the phone's metal finish. The most comfortable way of using the phone for me was to hold the cover with my left hand and use my right to operate the phone itself. Now, I have rather large hands so this could obviously be different if you weren't blessed with such a thing. Folding the front of the case back over the rear proved to be uncomfortable to me. Another downside is the fact that the front cover cannot double as a kickstand when positioning the phone in landscape. When done so, the phone just falls flat on its back.
Overall, I definitely like the case. It has that wow factor to it as everyone I have showed it to have been amazed by it's functionality. The only things that HTC should improve on it is to have the front flap being able to fold back and stay flush on the rear of the device. I also would had like for the front flap to stay open when you open, but the trade off is that when it springs back into position it does a good job of staying over the screen, even in a loose pocket. I noticed no addition use of the screen during the day in Gsam battery monitor. If I were to give it a score out of 10 I'd place it at an 8. Only major cons would be price and certain aspects of holding the device depending on hand size.
I'd have to tip my hat to HTC for coming up with the concept. If anyone has anymore questions about it feel free to ask.
Found this on ebay:
http://www.ebay.de/itm/HTC-One-m8-dot-View-Hulle-Cover-Neu-/271443579895?pt=DE_Handy_PDA_Taschen_Schutzh%C3%BCllen&hash=item3f334c53f7
i ordered a dot view but my provider wrote me that they will deliver later in may
Rudimente said:
i ordered a dot view but my provider wrote me that they will deliver later in may
Click to expand...
Click to collapse
What is your provider? It looks like the black ones are available on Verizon.com again (they were sold out all week). Just ordered one for a friend.
Supacat said:
What is your provider? It looks like the black ones are available on Verizon.com again (they were sold out all week). Just ordered one for a friend.
Click to expand...
Click to collapse
german t-mobile is my provider
Rudimente said:
german t-mobile is my provider
Click to expand...
Click to collapse
I'm having german t-mobile as well, they told me today that the cases should arrive this week..? but don't know how true that is..
amazon started listing the colored variations today, but all of them are marked as "available for preorder"
any chance you could post a couple of pics showing what the case looks like when open and folded back? All the photos i've seen of it don't show this. want to know how much it bulks the phone out.
cheers
Managed to pick the one and only one of these up from my local Phones4U in Croydon today, then went to the other local Phones4U and bough the other one, looks like they are finally starting to trickle in.
Figured out how to get the case to function as a kickstand. It's simple, but involves needing something else like a laptop or book as a prop. Simply open the cover and fold it over the back of the device. Then just rest the device on the laptop or book of your choice. Then, boom it stays put in place and with the way I got it, the angle is pretty nice for viewing.

Categories

Resources