OK..Hope this is the proper place to post this...
I am horrible at remembering to charge my phone, thus I don't keep GPS on at all time because of battery drain. However, I find it frustrating that every time I start Google maps that I have to enable the GPS. It seems to me that there should be a function built into that app which would enable the user to have it automagically enable the GPS reciever on the apps start up. To my knowledge this isn't possible but I feel it would be very useful. So, does anyone know how one would achieve this? Would it be possible to write a script that would accomplish this?
Thanks in advance for the input.
Menu button, Settings, Security & Location, set "Enable GPS satelites"
if you enable gps it wont actually turn on until you open google maps or a location based program (you will see a satellite dish at the top letting you know if it is on). the gps setting basically just tells the phone if a program requests gps location it is okay to turn the gps antenna on.
otherwise its off and battery doesn't get affected
Thanks...
Hey dk75 & averma, thanks for the posts. I should really read the fine print on some of these menu options prior to asking these questions...oops!
Hello!
My wife and me use latitude (from google) to see where we are on Google maps. Latitude works best if the GPS is on. HOWEVER, we just need to see each other on google maps when we are driving home (between 17:00 and 18:00). If i turn on the gps, latitude will eat the battery the whole DAY...) I would like to know if there is a way to schedule the activation of the gps...
pbecks1963 said:
Hello!
My wife and me use latitude (from google) to see where we are on Google maps. Latitude works best if the GPS is on. HOWEVER, we just need to see each other on google maps when we are driving home (between 17:00 and 18:00). If i turn on the gps, latitude will eat the battery the whole DAY...) I would like to know if there is a way to schedule the activation of the gps...
Click to expand...
Click to collapse
Try looking up "Locale" on the market. App isn't free, but most of the plugins for it are, and you can combine the functions of the plugins to do almost anything.
I use it for exactly what you're talking about myself.
Google Maps doesn't Auto-start GPS
Hi all,
I know this thread is pretty old but hoping for a reply all the same. I'm using the Galaxy S in the Uk with Google Maps & Navigation. I used to have the HTC HERO running maps & navigation and whenever I started either of those apps, the little atenna would appear to show that it was trying to find a gps position.
However, on my Galaxy S, whenever I start Maps or Navigation nothing happens. Even though I have "use wireless networks" and "use GPS satallites" both checked.
I cant imagine that technology would have taken a step back from such a useful feature and it is really irritating having to remember to disable/enable GPS (using SwitchPro home screen widget) before being able to use Maps or Navigation.
Anyone have any ideas how to fix this??
Install Tasker app and create a profile that enables GPS when you run Maps app.
tasker
tasker does not let you autostart gps... is there any other way. i also hate having to turn on gps and right under enable gps in blue words under settings it says< uses more battery. i can send pic
[TUT] Enable GPS automatically for Maps
[email protected] said:
tasker does not let you autostart gps... is there any other way. i also hate having to turn on gps and right under enable gps in blue words under settings it says< uses more battery. i can send pic
Click to expand...
Click to collapse
i have spent sometime now lurking behind the scenes in this group and
have read, in detail, my share of the posts. Make no mistake, the
guys here are experts and being experts their methods/explanation
often goes way over the head of the typical noob. this post is to
introduce this wonderful application of tasker to the inimitable
noob. i hope my effort would ease someone's labour.
imagine this scenario: you switch on maps on your phone and keep
wondering why it does not show your precise location and then it hits
you! you did not switch on your GPS. this post explains how to create
a profile that switches on your GPS automatically when you fire up
maps.
Just remember this: Profile is the context i.e. what you want to do.
in the present case, you want to first start maps and when maps is
started you want to switch on GPS. then when you exit maps, you want
GPS to be switched off. this is the object.
Stage 1: In profile tab click the + sign. give a name like 'MAP'.
this name will identify the profile that is currently active. after
you name it press the green tick and you are shown several options
like application, time, day etc. Now maps come under applications, so
press applications and all the appliations in your phone are
displayed. scroll down and select maps and press the tick mark. at
this stage you have told tasker that whatever you want to do revolves
around maps.
Stage 2: Now that you have hinted to tasker about the application
that is to be run, we should next state what should happen when the
appliation is started. after you press the tick mark you will be
shown a window asking for task selection. press new task and give it
a name like switch on GPS.
Stage 3: after baptising the task, you will be taken to a broad
window . press the + mark on the bottom left and the confusion
begins. a pletora of options is thrown at you (this is why tasker is
so darn powerful). this is called the 'select action category'.
digressing a little here you should know that google has changed
something with android and you cannot in the usual course toggle GPS.
so you should download an app called 'secure settings' (from google
play) and install it. once it is installed open it and it gives you an
option to install a helper. install the helper also. this activates
the GPS option.
Stage 4: once that process is completed, come back to tasker and get
yourself to the 'select action category'. here press on plugin and
then on secure settings. in the next window, touch 'edit' and then
scroll down to GPS and touch it. three options are displayed viz. on,
off and toggle. choose on and press the floppy disk icon to the
bottom left. press the tick mark and again press the tick mark. at
this stage you have succeeded in activating GPS when maps is started.
however, when you exit maps you find that GPS does not switch off by
itself.
Stage 5: to make it switch off by itself, you need to create the same
task again. just long press on the task which has already been
created (called here as switch on GPS) and you are presented with
several options. select the first one - 'add exit task' and follow
the process as in stage 4. however, instead of choosing 'on' select
'off' this time. once this is done come out and test it.
Stage 6 - and the most important - Feel happy and satisfied.
i am sure there should be some easier way to do this. however, in my
limited understanding of tasker this was how i did it. i really am
confused about the variables. i hope someone will help. when i say
confused, i should clarify that i have no inkling of what it does. :
( could someone tell me where to read up on it? i have searched on
google and i havent found any satisfactory explanation.
i will continue to post my profiles and i hope it is of help to the
group here.
J.RAM
the power of automation
capaxdoli said:
i will continue to post my profiles and i hope it is of help to the
group here.
J.RAM
Click to expand...
Click to collapse
Thank you for your post, I wouldn't be able to do it without you man!
I have a question. I'm using LBE security master which monitor my firewall, wifi, adware, etc. is there a way for tasker to check in LBE firewall and toggle my wifi/data when I want it? instead of creating a new profile for ON/OFF wifi. I just want it to look in my app and see what app has permission to what and allow/un-allow.
Thanks again!
[email protected] said:
tasker does not let you autostart gps... is there any other way. i also hate having to turn on gps and right under enable gps in blue words under settings it says< uses more battery. i can send pic
Click to expand...
Click to collapse
Yes is does autostart if you want with tasker..
Verstuurd van mijn GT-I9000 met Tapatalk
You can use the "Auto-Enable GPS for Maps" application, which switches both WiFi and GPS on when you launch Maps, Navigation, Local or Latitude, and restores them to their old state (e.g. switched off) when you quit these apps.
capaxdoli said:
i have spent sometime now lurking behind the scenes in this group and
have read, in detail, my share of the posts. Make no mistake, the
guys here are experts and being experts their methods/explanation
often goes way over the head of the typical noob. this post is to
introduce this wonderful application of tasker to the inimitable
noob. i hope my effort would ease someone's labour.
imagine this scenario: you switch on maps on your phone and keep
wondering why it does not show your precise location and then it hits
you! you did not switch on your GPS. this post explains how to create
a profile that switches on your GPS automatically when you fire up
maps.
Just remember this: Profile is the context i.e. what you want to do.
in the present case, you want to first start maps and when maps is
started you want to switch on GPS. then when you exit maps, you want
GPS to be switched off. this is the object.
Stage 1: In profile tab click the + sign. give a name like 'MAP'.
this name will identify the profile that is currently active. after
you name it press the green tick and you are shown several options
like application, time, day etc. Now maps come under applications, so
press applications and all the appliations in your phone are
displayed. scroll down and select maps and press the tick mark. at
this stage you have told tasker that whatever you want to do revolves
around maps.
Stage 2: Now that you have hinted to tasker about the application
that is to be run, we should next state what should happen when the
appliation is started. after you press the tick mark you will be
shown a window asking for task selection. press new task and give it
a name like switch on GPS.
Stage 3: after baptising the task, you will be taken to a broad
window . press the + mark on the bottom left and the confusion
begins. a pletora of options is thrown at you (this is why tasker is
so darn powerful). this is called the 'select action category'.
digressing a little here you should know that google has changed
something with android and you cannot in the usual course toggle GPS.
so you should download an app called 'secure settings' (from google
play) and install it. once it is installed open it and it gives you an
option to install a helper. install the helper also. this activates
the GPS option.
Stage 4: once that process is completed, come back to tasker and get
yourself to the 'select action category'. here press on plugin and
then on secure settings. in the next window, touch 'edit' and then
scroll down to GPS and touch it. three options are displayed viz. on,
off and toggle. choose on and press the floppy disk icon to the
bottom left. press the tick mark and again press the tick mark. at
this stage you have succeeded in activating GPS when maps is started.
however, when you exit maps you find that GPS does not switch off by
itself.
Stage 5: to make it switch off by itself, you need to create the same
task again. just long press on the task which has already been
created (called here as switch on GPS) and you are presented with
several options. select the first one - 'add exit task' and follow
the process as in stage 4. however, instead of choosing 'on' select
'off' this time. once this is done come out and test it.
Stage 6 - and the most important - Feel happy and satisfied.
i am sure there should be some easier way to do this. however, in my
limited understanding of tasker this was how i did it. i really am
confused about the variables. i hope someone will help. when i say
confused, i should clarify that i have no inkling of what it does. :
( could someone tell me where to read up on it? i have searched on
google and i havent found any satisfactory explanation.
i will continue to post my profiles and i hope it is of help to the
group here.
J.RAM
Click to expand...
Click to collapse
How to enable the location settings along with the GPS ON task?
Related
Just thought it was a good idea to open a thread with "issues" to be solved or things we want to get working on the Gear. I myself have a thing of two that I want to solve. For this I searched through some threads, saw some people mention the problems but never found a solution (although apparently other people were working on it to).
Because I like to be part of the solution but don't want to reinvent the wheel I thought it is maybe a good idea to sum some things up that need a solution in one thread.
Basic thing that I'm looking for and not sure if it is solved is
enable/disable BT tethering with just one tap (so to speak). Ideally automagically when opening an app that needs an internet connection
(If the problem isn't solved I was thinking to write an app for this)
(Reserved : list with open issues )
Id love someone to be able to rewrite the newest gear manager to work with people not on 4.3.
Or someone to get the things not working on 4.2 like weAther etc.
A native sms app that syncs with the phone properly. or get tablet talk to display names.
appelflap said:
enable/disable BT tethering with just one tap (so to speak). Ideally automagically when opening an app that needs an internet connection
Click to expand...
Click to collapse
Very easy with Tasker & Bluetooth Auto Connect.
Iv set up so if my device is locked & the screen is off for 30 seconds, it will disable bluetooth tethering for battery reasons. Iv also setup so if I slide two fingers up on my Novalauncher homescreen it will enable bluetooth tethering. Alternatively you can also enable a launcher shortcut which will execute the task.
You can also setup so bluetooth tethering will automatically be activated when launching certain applications.
If you need further instructions, dont hesitate. Tasker can be a little intimidating at first if this is your first time using it.
I'd quite like to be able to swipe away notifications, both individually and per app. Currently it's a bit of a hassle..!
fOmey said:
Very easy with Tasker & Bluetooth Auto Connect.
Iv set up so if my device is locked & the screen is off for 30 seconds, it will disable bluetooth tethering for battery reasons. Iv also setup so if I slide two fingers up on my Novalauncher homescreen it will enable bluetooth tethering. Alternatively you can also enable a launcher shortcut which will execute the task.
You can also setup so bluetooth tethering will automatically be activated when launching certain applications.
If you need further instructions, dont hesitate. Tasker can be a little intimidating at first if this is your first time using it.
Click to expand...
Click to collapse
I've never used tasker before. Maybe worthwhile to dive into it.
Also played with Bluetooth Auto Connect. I used it to maintain a connection. (But concluded very quickly that that will drain the battery of the Gear like hell LoL). Where do you use Bluetooth Auto Connect for in this scenario? I mean,if I understand you correctly everything can be done with Tasker.
appelflap said:
I've never used tasker before. Maybe worthwhile to dive into it.
Also played with Bluetooth Auto Connect. I used it to maintain a connection. (But concluded very quickly that that will drain the battery of the Gear like hell LoL). Where do you use Bluetooth Auto Connect for in this scenario? I mean,if I understand you correctly everything can be done with Tasker.
Click to expand...
Click to collapse
Bluetooth auto connect works as a plugin for tasker also, so you can incorporate bluetooth auto connect functions in your tasks.
You must get tasker, its a device changer.. both phone & gear.
fOmey said:
Bluetooth auto connect works as a plugin for tasker also, so you can incorporate bluetooth auto connect functions in your tasks.
You must get tasker, its a device changer.. both phone & gear.
Click to expand...
Click to collapse
Downloaded tasker. That's a f**ing brilliant app!
appelflap said:
Downloaded tasker. That's a f**ing brilliant app!
Click to expand...
Click to collapse
Its great isn't it.. opens up so many possibility's.
I'd also quite like to have 2 finger double tap to show recent apps and 2 finger long press to show battery info.
i would love to have double tap on the watch to wake.
fOmey said:
Very easy with Tasker & Bluetooth Auto Connect.
Iv set up so if my device is locked & the screen is off for 30 seconds, it will disable bluetooth tethering for battery reasons. Iv also setup so if I slide two fingers up on my Novalauncher homescreen it will enable bluetooth tethering. Alternatively you can also enable a launcher shortcut which will execute the task.
You can also setup so bluetooth tethering will automatically be activated when launching certain applications.
If you need further instructions, dont hesitate. Tasker can be a little intimidating at first if this is your first time using it.
Click to expand...
Click to collapse
fOmey do i only need tasker on the phone in order to do that? The way i am manually doing it is i first enable tether on the phone ands then dive into the full settings on the Gear.
If the phone stops tethering then the Gear option automatically gets unticked, but it does not work the other way around.
I have tasked installed on both phone and gear. Could you please provide some instructions?
Also, have you checked Atooma? I have it both on the S4 and the Gear and i can do stuff on the phone with three triggers from the watch:
1) Horizontal movement
2) Vertical movement
3) Photo taken
Does tasker integrate with the watch the way Atooma does?
Thanx again for everything you have done.
YOU ARE THE MAN!
I'd like to be able to scroll down and see a playlist and pick a song
Sent from my SAMSUNG-SM-N900A using xda premium
Functionality improvement - (we just need a piece of software for that) - to display on the GEAR atmospheric pressure, humidity, temperature - all of those sensors are in NOTE3
Edited original post as now getting. a collection of tasker tasks i have going on and easier to keep them in the first post but Will help below if anybody wants to copy them, also if anyone else wants to post there's that will be good.
1st) have tasker to toggle settings like wifi brightness etc when i get to work. Reverts settings back when i get home. Produces notifications on watch.
2nd) sends a message to my wife when i say launch task 1 that tells her im on my way home.
3) launches a autowear location menu on the watch. In the menu i can select wether i want high accuracy or low and wether i want location services on or off atall.
4) when i charge my phone between 2230hrs and 0625hrs the watch is switched to screen off, Bluetooth off and phone set to vibrate. When its unplugged or after 0625 the watch is switched to always on and phone is muted.
5) mobile data on and off options via autowear.
6) detects when i have lost connection to the watch and immediately turns on GPS to record the location. Then notifies me on my phone with a map view. I fix generators for a living so i need to take my watch of sometimes or when i have a shower in the gym etc. If for whatever reason i forget it which is unlikely i will know where i last had it.
7) every morning when i take my phone and watch off charge it selects a different watchface every morning at random from a predefined list. (needs watchmaker to be installed)
8) using autowear so that when i start My Tracks on the watch it automatically starts my gps task for me.
9) little on screen widget that i can control my Xbox/sky/tv changing channels, volume, play and pause, go to Fifa 15, record that, turn everything off. Accomplished using autowear, autoremote, autoinput, and a redundant tablet.
I have only just began with tasker so my methods won't be the most efficient but they work. If anyone has better ways as i mainly using auto input then please get in touch.
Could you describe which apps you used to pull this off? Thank you
Yeah sure, was a app called Tasker that i used on my phone to create it all and then a tasker plugin called tasker wear i think.
I have since been tinkering with it.
The updated version now has the following options;
1) text the wife I'm on my way home.
2) turns Wi-Fi of, auto brightness on, sync off
3) opposite of 2.
4) closes and returns back to watch face.
With option 2 and 3 i get a notification of what has beebeen switched on/ off.
With option 1 it also activates option 3 ready for when i get home.
Also if i forget to do the above especially switch evereverything on it detects when I'm nearly home and does it for me.
check AutoWear tasker plugin from joao, you can do anything with it in combination with the other Autoapps.
TheKaser said:
check AutoWear tasker plugin from joao, you can do anything with it in combination with the other Autoapps.
Click to expand...
Click to collapse
I'll have a look at that thanks, currently going to create a task that switches between gps and battery saving location as you can't turn location of anymore. So will have it switch to gps when needed and back to battery saving when not.
Also going to see if i can switch to cinema mode when charging and lost connection to the phone together and to revert back to previous or new watch face when undocked and regains connection to phone.
Hi Phil, would love to hear how you get on with that.
Hi rusty,
Just finished putting something together.
I have tasker detect when it's on charge and if between 2230 and 0625, and if so it switches the watch screen to off, and Bluetooth of.
using a profile manger, that detects that the watch it's no longer connected so switches notifications on the phone back on.
The opposite is when it's unplugged it switches Bluetooth back on, turns the watch screen to always on and the profile manager then detects the watch so turns the phone to mute but watch still vibrates.
I can now sleep at night with no lights keeping me awake and the only thing i have to do is plug my phone in.
Just to note it was pretty simple to set up with tasker and autoinput.
TheKaser said:
check AutoWear tasker plugin from joao, you can do anything with it in combination with the other Autoapps.
Click to expand...
Click to collapse
Hi kaser, as you recommended autowear do you have any experience with it as i can't get my head round it and there isn't much on YouTube or Google to help out.
phil gpx said:
Hi kaser, as you recommended autowear do you have any experience with it as i can't get my head round it and there isn't much on YouTube or Google to help out.
Click to expand...
Click to collapse
Hi, sorry for the late reply, I was on holidays.
I do have some experience. You need to download AutoApps from Google Play and suscribe to the alpha testing. Then you can download AutoWear. For this you also need to joing the Google+ community where the developer is always nice and reactive when posting bugs, questions or guidelines. Posting at the community is the best thing you can do since AutoWear is still in Alpha and it improves every day and it is not too straight forward to understand, especially how it communicates with AutoVoice and how commands and parameters are passed to Tasker.
By the way, I have a similar profile telling my girlfriend when I get to work, when I leave work and when I have parked at home coming from work, which automatically trigger depending on my location and connection to my car's bluetooth or work's WiFi. You don't really need your watch for that
Cheers for replying.
I have already downloaded it and played around but can't get my head around the processes of the app.
I followed the guide for the voice screen but cant get new screens up or start tasks etc.
I'm usually pretty good at working things out but cant with autowear.
what is it you are trying to do? Do you have the latest version of tasker?
Yeah i have the updated tasker but just can't work out how to get from the voice screen too say a "4 menu screen" that has tasks i have set up. Not sure what i want to accomplish with tasker next but i know if i can understand autowear it would help.
Have you done anything with autowear.
I have done the above tasks in the first post with autoinput and taskerwear but that is just a series of notifications that you can select to start tasks.
my main use for autowear is to send whatsapp messages from scratch (whatsapp currently only allows to reply to messages).
To achieve this I open an AutoWear Voice Screen by shaking the watch, and say "write to XXXX and say YYYY". This triggers an AutoVoice profile configured to react to "write to (?<contact>.+) and say (?<message>.+) (using Regex)
Inside the task, I do an WhatsTasker plugin contact search of the variable %contact generated by the regex command. Once found, I text the %message to this contact using whatstasker.
The best thing to do is to read the variable descriptions in the task. For example, you create your profile of AutoVoice Recognized. Inside it, before clicking configuration, you can see all the local variables available and their description. These are usable within the task. Same thing goes for any autowear task, they are usable after calling the task.
For example, in my task, after finding the contact, I have an AutoWear confirmation screen with the picture of my contact, his name, and the message I dictated. And following that I have an if %awmessage (the output of this confirmation screen) is different to cancel, then send the message.
Hope this helps a bit!
Thanks buddy, i will try and emulate this tonight once the kids are in bed. Whatsapp was one of the things i have been thinking of doing, just wish there was a way of bringing up a previous conversation without waiting for a new message.
well maybe you can capture the messages as they come, along with the sender's name, and save them in a temp file. Then create an autowear screen that shows the content of this file when requested... but I guess it would be very difficult to make it work perfectly (especially with groups).
I have managed to create and implement a mobile data on and off switch into my interactive notification popup for system settings using tasker, taskerwear and autoinput.
I now have the ability to switch wifi, mobile data, gps on and off as well as high and low accuracy location services and change profiles from one notifaction popping up.
left watch behind
Currently trying to set up a tasker profile that when i get disconnected from my watch will activate gps, stores the location, notifies you where it is and shows you on the map.
Hopefully will never need it but you never know. I.e you leave it in the gym, at work etc
Is there already something that does something similar as struggling at the moment but will crack on if there isn't.
Any one let me know about how to get nearby cell tower ID in a single variable.
Otherwise, how to convert the context in profile as a task.
Ty
Sent from my Micromax A58 using XDA Free mobile app
I'm sorrlearning tasker but i think if you create a new profile that activates when you connect to that cell tower. Then create a task and set variable %whateveryouwantto to %CellID.
You should only have to do that profile once and the variable will be set and you can use it in your profiles and tasks.
On another note i got my lost watch profile working like a charm.
Great Job
TheKaser said:
my main use for autowear is to send whatsapp messages from scratch (whatsapp currently only allows to reply to messages).
To achieve this I open an AutoWear Voice Screen by shaking the watch, and say "write to XXXX and say YYYY". This triggers an AutoVoice profile configured to react to "write to (?<contact>.+) and say (?<message>.+) (using Regex)
Inside the task, I do an WhatsTasker plugin contact search of the variable %contact generated by the regex command. Once found, I text the %message to this contact using whatstasker.
The best thing to do is to read the variable descriptions in the task. For example, you create your profile of AutoVoice Recognized. Inside it, before clicking configuration, you can see all the local variables available and their description. These are usable within the task. Same thing goes for any autowear task, they are usable after calling the task.
For example, in my task, after finding the contact, I have an AutoWear confirmation screen with the picture of my contact, his name, and the message I dictated. And following that I have an if %awmessage (the output of this confirmation screen) is different to cancel, then send the message.
Hope this helps a bit!
Click to expand...
Click to collapse
It sounds great :good:
May you please share your work with screenshots or something else so I can make it work for me?
Thanks in advance and best regards
So far my attempts to google this answer have come up empty. I can open Google Maps driving mode with AutoShortcut no problem. But making it actually close is turning out to be impossible.
If I try to do a "Kill App", it doesn't kill the notification, leaving it in a bizarre half-open state. Has anyone found an intent or something that can actually kill this off properly?
Have you tried to run a Go Home action before killing the app?
Yes, unfortunately does not help at all. Even gave it ~3 second wait.
Vincent Law said:
So far my attempts to google this answer have come up empty. I can open Google Maps driving mode with AutoShortcut no problem. But making it actually close is turning out to be impossible.
If I try to do a "Kill App", it doesn't kill the notification, leaving it in a bizarre half-open state. Has anyone found an intent or something that can actually kill this off properly?
Click to expand...
Click to collapse
Try code run shell: am force-stop com.google.android.apps.maps & tick "use root". Change the package name if is necessary.
My device is not rooted, is that going to do anything?
Vincent Law said:
My device is not rooted, is that going to do anything?
Click to expand...
Click to collapse
Root is needed to run that command.
But did you try to kill another app with the method you've tried for google maps? Is it working?
So I managed to work out a solution to this, and it involves using the AutoNotifications plugin. I use the plugin to instruct Tasker to press the "end navigation / stop driving" button in the notification tray, which does the correct thing. For those looking to replicate, it's an "internal action", so use the first internal action, not one of the action button options that most guides suggest.
Vincent Law said:
So I managed to work out a solution to this, and it involves using the AutoNotifications plugin. I use the plugin to instruct Tasker to press the "end navigation / stop driving" button in the notification tray, which does the correct thing. For those looking to replicate, it's an "internal action", so use the first internal action, not one of the action button options that most guides suggest.
Click to expand...
Click to collapse
i am trying to "stop driving" using autonotification and cant figure it out. Can you please be more specific than "internal action" which internal action. What variable did you using for the stop driving button. I am trying to use autonotification query and action but i cant figure out which variable in the query to use for the action.
thanks
Vincent Law said:
So I managed to work out a solution to this, and it involves using the AutoNotifications plugin. I use the plugin to instruct Tasker to press the "end navigation / stop driving" button in the notification tray, which does the correct thing. For those looking to replicate, it's an "internal action", so use the first internal action, not one of the action button options that most guides suggest.
Click to expand...
Click to collapse
I'm new to autonotification - I have it set up to query for the "Maps" notification, and it's returning the %anapp variable correctly - I can even click on the notification and bring the focus back to the maps app - but how the heck do you fire this "internal action" to stop driving? I'm sure it must be obvious...
Bulldoguk72 said:
I'm new to autonotification - I have it set up to query for the "Maps" notification, and it's returning the %anapp variable correctly - I can even click on the notification and bring the focus back to the maps app - but how the heck do you fire this "internal action" to stop driving? I'm sure it must be obvious...
Click to expand...
Click to collapse
I just spent a few days trying to figure this out. Here is how I was able to get it working:
Create a new task / add these to a current task:
A1 - Add Action - Plugin, AutoNotification, Query. Tap Edit, Select "Maps" from Apps and under Advanced tap Internal Actions Big, tap the Tag icon. It should populate with %aninternalactions.
A2 - (Only needed for debugging) Add Action, Alert, Flash, tap the Tag and choose %aninternalactions, then edit to choose the first value in the array - %aninternalactions(1)
A3 - Add Action, Plugin, AutoNotification, Actions. Tap Intercept Action, tap the tag and choose %aninternalactions, then edit it again to - %aninternalactions(1)
To test, start driving mode and run the task manually. You should see the button GUID flash (if you enabled A2) and Driving Mode should end :good:
It works now
I figured out a solution.
Tasker gives you the advise to use ADB Wifi.
Here's what I did:
- enable and go to developer settings
- check ADB debugging
- check ADB while charging (only needed, if it stops working for you when you disconnect your USB cable. Try without first!)
- then run from your PC `adb tcpip 5555` to enable adb over wifi
- use Tasker Action "kill app", uncheck "Use Root".
Maps (or Driving Mode) can finally be killed this way.
Tried on Huawei Mate 20 Pro (LYA-L29) running Android 10 (10.0.0.214)
How are you able to open Google maps?
Mine opens for a millisecond then closes.
MSK1 said:
How are you able to open Google maps?
Mine opens for a millisecond then closes.
Click to expand...
Click to collapse
Hi, MSK1,
I searched for a long time for this solution, so maybe this one will help you out.
You can launch Google Maps directly into Navigation mode via using an intent.
You may find this one interesting. https://forum.xda-developers.com/showpost.php?p=46600949&postcount=3
Mine looks like this.
google.navigation:q=Zip+City,+Street+Number
Happy Driving!
Best Regards.
3di said:
Hi, MSK1,
I searched for a long time for this solution, so maybe this one will help you out.
You can launch Google Maps directly into Navigation mode via using an intent.
You may find this one interesting. https://forum.xda-developers.com/showpost.php?p=46600949&postcount=3
Mine looks like this.
google.navigation:q=Zip+City,+Street+Number
Happy Driving!
Best Regards.
Click to expand...
Click to collapse
Thanks.
I found an easier way.
I downloaded the "navigation shortcut" app from the play store.
When I launch this as an app from tasker then the navigation stays on.
Sent from my EVR-N29 using Tapatalk
Hi,
I tried to find root cause, but unfortunately without success. Is there anybody, who using Tasker or another application for automatization of your phone without any issues?
My issue is, Tasker is still "delayed" - but same rules I used before on LG G3 (Android 6.0) - but now on P9 (DualSIM) didn't work.
I have task for Calendar Entry, where if I have appointment in my work calendar, during this time Sound mode is deactivated (only Vibrate).
Some suggestion? I tried white lists, etc. or another app with same bad behavior.
Thank you!
Well, I tried to deactivate power management app from Huawei over ADB and looks good now finally! Its workaround, but tasker now working very well as expected.
adb shell pm hide com.huawei.powergenie
Did you have "Run in Foreground" selected in Tasker's preferences?
My Tasker works fine with that selected, although I also have trusted the app in permissions manager, allowed it to auto launch & activated it as a device administrator in advanced settings/security.
Yeah, I tried every tip over Tasker or phone (EMUI settings) and only deactivate power management helps me.
I had the same problem with IFTTT. It worked perfectly with my LG G3, but was hopeless on the P9. No amount of white-listing or settings would work.
I even had the app in memory, with Google maps running, on GPS, screen on, and it still wouldn't trigger a location based profile.
I've had to revert to manually arming and dis-arming my home security system. Annoying.
I translate from spanish so I'm sorry if your phone shows menus with other name.
You must go to adjust > advanced adjusts > memory and store and at bottom of page "space clean". On new screen push on upper-right wheel, and now on last option "white list of memory clean". Finally look for your app and activate it.
If you don't include app here, clean system will close it on background and timers won't work. It solved my problems.
aidrabmol said:
I translate from spanish so I'm sorry if your phone shows menus with other name.
You must go to adjust > advanced adjusts > memory and store and at bottom of page "space clean". On new screen push on upper-right wheel, and now on last option "white list of memory clean". Finally look for your app and activate it.
If you don't include app here, clean system will close it on background and timers won't work. It solved my problems.
Click to expand...
Click to collapse
"Settings>Advanced settings>Memory & storage>Storage cleaner" and "Memory cleanup whitelist".
Using Agama, I can get an app to start following a reboot. However, I would like to start the App at every Startup. Does Automate or any other app let you do that?
carroamer said:
Using Agama, I can get an app to start following a reboot. However, I would like to start the App at every Startup. Does Automate or any other app let you do that?
Click to expand...
Click to collapse
Why would you need Tasker for that simple.
Settings, type in the Search Autostart and add your app to the list of apps to be started on every reboot.
You may also need to disable Battery Optimization for your app (to make sure it would still work in background when the phone sleeps with dark screen)
That should generally work for all Androids. I don't have Huawei P9 now for years, I remember that EMUI might have had specific Settings organization but there was also Autostart (or Auto start)...
zgfg said:
Why would you need Tasker for that simple.
Settings, type in the Search Autostart and add your app to the list of apps to be started on every reboot.
You may also need to disable Battery Optimization for your app (to make sure it would still work in background when the phone sleeps with dark screen)
That should generally work for all Androids. I don't have Huawei P9 now for years, I remember that EMUI might have had specific Settings organization but there was also Autostart (or Auto start)...
Click to expand...
Click to collapse
When I search 'Autostart' it produces 'No results'
carroamer said:
When I search 'Autostart' it produces 'No results'
Click to expand...
Click to collapse
I had P9 for three years (if you don't believe, you can find tons of my posts here back from 2017-2018)
Now, you have that phone, not me (I got rid of my last Huawei almost three years ago) - I cannot show you and I cannot look into the EMUI settings because I don't have the EMUI phone anymore
But I KNOW that there was a way in EMUI how to control which apps will be automatically started on boot - I know because I played with all that back in those years, II did need for many apps like AdAway, Find My Device and similar that required to be auto-started to operate correctly
Take your time and google and you'll find. Sorry, I tried to help you but I will no more waste my time on that. Huaweis are past time for me
And take your time, use your imagination, If not Autostart, google for EMUI startup manager or something similar to find the answer for your question on the Net
Hi guys, in wondering if it's possible to have a task run when I exit a specific app.
Here's the issue...
I normally use Google maps but this one is mid range so maps go tends to work better. The problem is that maps go runs in Chrome so if I create a simple profile to turn on GPS (using secure settings) when I run maps go, nothing happens because technically it's Chrome that's running so it doesn't trigger the task and I don't want to attach Chrome to that trigger because the GPS would be on and off all day long.
I created a task and assigned it to a widget to turn on GPS then run maps go which works well but now I need to figure out a way to turn off the GPS when I exit maps go.
Anyone got any suggestions?
Create a regular App State profile and link the task. Longpress it and turn it into an exit task.
When I start a new profile, tap State, then Application, the only thing that happens is tasker gives me 2 options... Unread Text or Calendar Entry and neither of them work in respect to what you said.
Can you please tell me what I'm doing wrong?
Never mind, I got it backwards. Figured it out now, thanks bro