Database Develop

[Q] Newbie trying to confirm root on Nexus One 2.2.1 FRG83

Ladies and Gents:
Please help me out.
I am trying to install a "Japanese IME" that sir JMaurice has kindly provided through one of the forums.
Did everything (I think) required in order to get my N1 connected and recognized by my laptop. Then used SuperOneClickv1.5.5-ShortFuse to gain root. Started on the IME installation and got the following.
>adb devices
List of devices attached
HTxxxPxxxxxx device
>adb kill-server
* server not running *
>adb root
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
adbd cannot run as root in production builds
>adb remount
remount failed: Operation not permitted
So I decided to confirm root.
>adb shell
$ su
su
# exit
exit
$ exit
exit
I couldn't start the "adb push" sequence due to the errors above. What am I doing wrong?

Did you reboot after executing SuperOneClick? Try that.

Jack_R1 said:
Did you reboot after executing SuperOneClick? Try that.
Click to expand...
Click to collapse
Believe I rebooted. Rebooted again just in case. Still gives me the following:
>adb root
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
adbd cannot run as root in production builds
>adb remount
remount failed: Operation not permitted

Weird, but already seen on the forum not a long time ago, I think. I'm not sure what can be done in this situation. "adb remount" can be easily substituted by shell commands, root shell you're still achieving by "su", but how to solve this - I have no idea. Might be permissions thing.

Jack_R1 said:
Weird, but already seen on the forum not a long time ago, I think. I'm not sure what can be done in this situation. "adb remount" can be easily substituted by shell commands, root shell you're still achieving by "su", but how to solve this - I have no idea. Might be permissions thing.
Click to expand...
Click to collapse
Thanks for your replies. Am searching the forums for a similar post; still no luck. Hopefully someone will chime in with an answer.
Thanks again.

You have root, you just don't have an insecure boot.img

Rusty! said:
You have root, you just don't have an insecure boot.img
Click to expand...
Click to collapse
Please clarify. Where possible, detailed explanation/instructions would be most appreciated.

You have root, that's all fine.
To use the command adb remount, you need an insecure bootloader, as you don't have this (due to using the stock boot.img) you have to mount /system as RW in a different way:
su
mount -o remount,rw /dev/mtdblock3 /system

Rusty! said:
You have root, that's all fine.
To use the command adb remount, you need an insecure bootloader, as you don't have this (due to using the stock boot.img) you have to mount /system as RW in a different way:
su
mount -o remount,rw /dev/mtdblock3 /system
Click to expand...
Click to collapse
What I am trying to achieve after adb remount is:
adb push iWnnIME/jp.co.omronsoft.iwnnime /data/data/
adb push iWnnIME/[email protected]@[email protected] /data/dalvik-cache/
adb push iWnnIME/libiwnn.so /system/lib/
.
.
.
adb push iWnnIME/libnjubase2.so /system/lib/
adb push iWnnIME/DroidSansJapanese.ttf /system/fonts/
adb install iWnnIME/iWnnIME.apk
This will actaully be the first time for me to use su. Could you confirm whether the following sequence of commands are correct?
>adb shell
$ su
# mount -o remount,rw /dev/mtdblock3 /data
# exit
$ exit
> adb push iWnnIME/jp.co.omronsoft.iwnnime /data/data/
> adb push iWnnIME/[email protected]@[email protected] /data/dalvik-cache/
>adb shell
$ su
# mount -o remount,rw /dev/mtdblock3 /system
# exit
$ exit
> adb push iWnnIME/libiwnn.so /system/lib/
.
.
.
> adb push iWnnIME/libnjubase2.so /system/lib/
> adb push iWnnIME/DroidSansJapanese.ttf /system/fonts/
> adb install iWnnIME/iWnnIME.apk
Please let me know if I am missing anything.

Wrong. You don't need to remount data, it's always writeable, and the command is erroneous - you're mounting system partition and calling it "data". You need to just push the apps to /data, as shown below:
> adb push iWnnIME/jp.co.omronsoft.iwnnime /data/data/
> adb push iWnnIME/[email protected]@[email protected] /data/dalvik-cache/
> adb shell
$ su
# mount -o remount,rw /dev/mtdblock3 /system
# exit
$ exit
> adb push iWnnIME/libiwnn.so /system/lib/
.
.
.
> adb push iWnnIME/libnjubase2.so /system/lib/
> adb push iWnnIME/DroidSansJapanese.ttf /system/fonts/
> adb install iWnnIME/iWnnIME.apk

Jack_R1 said:
Wrong. You don't need to remount data, it's always writeable, and the command is erroneous - you're mounting system partition and calling it "data". You need to just push the apps to /data, as shown below:
> adb push iWnnIME/jp.co.omronsoft.iwnnime /data/data/
> adb push iWnnIME/[email protected]@[email protected] /data/dalvik-cache/
> adb shell
$ su
# mount -o remount,rw /dev/mtdblock3 /system
# exit
$ exit
> adb push iWnnIME/libiwnn.so /system/lib/
.
.
.
> adb push iWnnIME/libnjubase2.so /system/lib/
> adb push iWnnIME/DroidSansJapanese.ttf /system/fonts/
> adb install iWnnIME/iWnnIME.apk
Click to expand...
Click to collapse
I think I am starting to understand this. I punched in the first adb push sequence and got the following:
> adb push iWnnIME/jp.co.omronsoft.iwnnime /data/data/
push: iWnnIME/jp.co.omronsoft.iwnnime/dicset/master/njuserphone.a -> /data/data/dicset/master/njuserphone.a
failed to copy 'iWnnIME/jp.co.omronsoft.iwnnime/dicset/master/njuserphone.a' to '/data/data/dicset/master/njuserphone.a': No such file or directory
Checked in tools directory and the appropriate directory/file combination was there. Does this indicate that I have to create the appropriate directory in my phone?

Someone? Anyone?
Or is it possible to execute the same adb sequence in shell as su?

I must admit, I've never pushed more that a single file at a time over, given you appear to be trying to push an entire directory tree, perhaps you might be better off copying it over to the SD card in Windows, and using busybox to get it where you need it.

Exactly as Rusty suggested above me. Otherwise you need to create all the directories manually, through adb shell mkdir <your_directory_that_is_not_on_the_phone> .

adb problems.......

first of all iv been trying to root my legend for hours and this is geting very furstarting... i am using the guide here http://forum.xda-developers.com/showthread.php?t=845512
i have finaly managed to get adb to work and have made my goldcard after 2 days of intense work and now im trying to downgrade my phone to root it
i am geting the following error in adb
when i type adb remount it says remount failed operation not permitted i have looked all over the net and found no answer
in additon to that when im trying to use adb push i type the following
adb shell
$su
su
#adb push flash_image /data/local/
adb push flash_image /data/local/
i just get the same line repeated how to excute commands from adb? this is very confusing since im noob with rooting also the following lines i don't know how to excute them too
adb push flash_image /data/local/
adb push misc1-2.img /data/local/
chmod 755 /data/local/flash_image
cat /dev/mtd/mtd0 > /sdcard/misc_backup.img
/data/local/flash_image misc /data/local/misc1-2.img
please explain to me how to use theese thanks!

That one is relatively easy. You could also follow Paul's guide but I like my approach better
Connect your phone to your PC. Second you have to install VISIONary r13 into your phone and do the "temproot" procedure. After a successful "temproot" you should be able to adb shell and then su. Fire up command prompt and issue:
adb shell
su
...you should have root privileges now (showing #). Next thing is backing up misc partition and replacing it with one from hack4legend-v5.zip. Extract this zip somewhere and fire another command promt there. Now you should upload flash_image binary and misc1-2.img:
adb push flash_image /data/local/
adb push misc1-2.img /data/local/
...switch back to 1st command prompt and change permission of flash_image_binary:
chmod 755 /data/local/flash_image
...and backup your current misc partition:
cat /dev/mtd/mtd0 > /sdcard/misc_backup.img
Now flash misc1-2.img:
Code:
/data/local/flash_image misc /data/local/misc1-2.img
exit
...and you are set to downgrade retaining HBOOT 1.00.
Click to expand...
Click to collapse
Read better, you have to open a new terminal for pushing the files to the phone, you can't use adb push while you are in adb shell.
BTW you should avoid posting questions in development section.

[ROOT] Linux command lines if SuperOneClick fails

Hi.
I've tried many times to root my LG2X with Z4root, UniversalAndRoot, Visionary and SuperOneClick since I've bought it but it failed each time.
I've seen the [Root] topic in the developpement thread but I can't post there (less than 10 posts...) but I want to help someone to root his/her mobile.
I've searched a long time a good way to do so without SuperOneClick (which doesn't respond with Windows Seven or Ubuntu 11.04) but there is none.
There we go...
Disclaimer : I can't be responsible if you break your phone, cancel your warranty or launch your LG2X on the wall in rage.
If you want, there is already SuperOneClick which run smoothly for many geeks : LG2X SuperOneClick Forum and SuperOneClick Forum
My HTC Magic had been rooted with the command line and I've tried myself to do so with every bit of informations and tips I could find on Internet.
I recommand to test the SuperOneClick method and if it fails, come test this with a Linux terminal (psneuter, su-v2, busybox and the SuperUser.apk can be found in the SuperOneClick archive) :
Code:
adb push psneuter /data/local/tmp
adb push su-v2 /data/local/tmp
adb push busybox /data/local/tmp
adb shell
$ busybox chmod +x /data/local/tmp/psneuter
$ /data/local/tmp/psneuter
adb remount
adb shell
# busybox mv /data/local/tmp/su-v2 /system/xbin/su
# busybox chmod 6755 /system/xbin/su
# busybox chown 0.0 /system/xbin/su
# busybox cp /system/xbin/su /system/bin/su
# busybox chown 0.2000 /system/bin/su
# busybox cp /data/local/tmp/busybox /system/xbin
# busybox chmod 0755 /system/xbin/busybox
# busybox chown 0.2000 /system/xbin/busybox
# exit
adb install Superuser.apk
adb reboot
And... Normally you have permanent root on your LG2X.
You can check the files permissions with
Code:
ls -l /system/xbin/su /system/bin/su
-rwsr-sr-x root root 26264 2011-04-23 20:07 su
-rwsr-sr-x root shell 26264 2011-04-23 23:20 su
It seems that /system/xbin/su isn't necessary at all. The su command which gave you the root is the one in /system/bin/. And I had some problems with /system/xbin, I've deleted the folder (with rm /system/xbin or mv /system/xbin /dev/null, I can't recall) and applied mkdir on it again.
If this can be of help, I'll update this later.

thanks for the detailed instructions, but super one click definitely works with win7 (64bit too) as long as you have the right drivers installed

Thanks but with Windows Seven 64 bits, Linux ou Windows Seven 32 bits with Virtualbox I end up with "SuperOneClick doesn't respond" or stuck on with "chmod psneuter" (with the drivers properly installed).
It's only an alternative solution if SuperOneClick doesn't run properly for another guy.

Thanks a lot for that tips.
The problem I have now is that su isn't persistant.
When I use
$ su
It hangs up few seconds... and says "Permission denied"
I've used su-v2
Here are the su permission :
-rwsr-sr-x root shell 26324 2011-02-13 14:43 su
Is there a more up-to-date su, that will maybe fix the problem ?
Thanks.
EDIT :
Ok.
The wait time seems to come from SuperUser, I've removed it.
Now I have directly the "permission denied", and "stat failed with 2: No such file or directory" in the logcat.
Maybe that can help.

Hannes The Hun said:
thanks for the detailed instructions, but super one click definitely works with win7 (64bit too) as long as you have the right drivers installed
Click to expand...
Click to collapse
It didn't for me (after installing nightly 51)
With the step-by-step instructions I get "Failed to set prot mask (inappropriate ioctl for device)" when trying to execute psneuter.

Hi.
Sorry for the wait.
Have you resolved your problem with your rooting?

Rooting/unlocking Nexus One with broken power button using Linux terminal tools

I am attempting to get Cyanogenmod onto my Nexus One, but am running into far more problems than expected. The information on rooting Android devices seems heavily fragmented across the web and the tools unreliable. At least in my case, SuperOneClick has proven a complete misnomer. So I'd like to go back to basics - executing as many of the commands as possible from a Linux terminal to get the phone rooted/unlocked/whatever else has to happen to get Cyanogenmod installed. The two constraints I'm working with here are as follows:
1. The device is running Android 2.2.1 (I downgraded from 2.3.x using the PASSIMG method).
2. The power button on the device is broken, so any method which requires pressing/holding it is ruled out.
The problem I am having is that even after following Linux-centric guides, I get to the point of installing the SuperUser app followed by the ROM Manager app, but I'm never prompted to give ROM Manager superuser permissions and so can't flash the ClockworkMod recovery.
Below I describe the steps I've been taking so far, based on the "How To Root Nexus One Running Android 2.2.1 From Ubuntu Linux" guide (Google it, I can't post hyperlinks).
- Download/extract/move Nexus One Softroot files to same directory as adb
- From adb directory, execute the following commands:
sudo ./adb push psneuter /data/local/tmp/psneuter
sudo ./adb push busybox /data/local/tmp/busybox
sudo ./adb push su /data/local/tmp/su
sudo ./adb shell chmod 755 /data/local/tmp/psneuter
sudo ./adb shell chmod 755 /data/local/tmp/busybox
sudo ./adb shell chmod 755 /data/local/tmp/su
sudo ./adb shell cd /data/local/tmp ./psneuter
sudo ./adb shell
After executing sudo ./adb shell as above, I get the # prompt, which is purported to indicate that rooting was successful.
- Still following the guide, I then execute the commands which purportedly make root permanent:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /data/local/tmp
./busybox cp busybox /system/bin
chmod 4755 /system/bin/busybox
busybox cp su /system/bin
chmod 4755 /system/bin/su
exit
exit
- Again, still following the guide, I execute the commands which purportedly set the /system partition back to read-only:
sudo ./adb shell
su
mount -o remount,ro -t yaffs2 /dev/block/mtdblock3 /system
exit
exit
- Now, I download the SuperUser app from the Android Market and open it to make sure it's running.
- Next, I download the ROM Manager app from Google Play (looks like it pulled a sneaky and upgraded from Android Market to Google Play here).
- I run ROM Manager and choose Flash ClockworkMod Recovery. I'm prompted to confirm the phone is a Google Nexus One and then ROM Manager runs for about 30 seconds (yellow program bar goes all the way) before spitting out An error occurred while attempting to run privileged commands!. And this is the point I am stuck at.
I should note that at no point am I prompted by the SuperUser app to give the ROM Manager app super user permissions. I don't restart the phone or do anything else throughout all of the steps I've described above, so I can't see any reason for root to have been lost at any point. In fact, if I execute the command sudo ./adb shell after all this, I still get the # prompt indicating root. And when I execute id afterwards, I get uid=0(root) gid=0(root) -- further confirmation of root. I really am stuck on this one. I've spent a lot of time digging through forum posts and online articles, but the signal to noise ratio is poor and I haven't been able to find anything that actually works. Can someone suggest where I am going wrong?

Programs might expect su to be in /system/xbin rather than /system/bin, which is probably your case.
Also, use SuperSU instead of Superuser.
Also, make sure the su you're using is matching the relevant control program - which means, downloading Superuser from the Play Store won't help, if it can't work with the binary you have. So download a complete ZIP from XDA with SuperSU.apk and su binary, and use those. The last version I used was 0.89 and it was on XDA just like I described above.

interesting problem with ez fix, get new phone. n1's are $100 on ebay, thats how i got mine.

[Q] Rooting problems regarding permission

Hi, I'm a newbie to android rooting and have spent the whole day trying to root my Kindle Fire HD v7.2.3.
I've used the bin4ry RunMe.bat and RootQemu.bat. I have no problems with the Qemu part but as for the RunMe.bat part I get permission problems (see picture below)
http://www.freeimagehosting.net/ikz64
The device gets rooted but the super user is no where to be seen. Therefore I can access root files but I can't write as it is read only.
I've already tried this: http://forum.xda-developers.com/showthread.php?t=2086210 (fixing a bug)
I've also tried the basics of rebooting after rooting, run as admin, locate through cmd but nothing has worked for me so far.
Anyone know what the problem is?

I was having a similar permission denied error when rooting 7.2.3. Try this and see if it helps. These commands are pulled from the Qemu script.
Code:
adb shell mv /data/local/tmp /data/local/tmp.bak
adb shell ln -s /data /data/local/tmp
adb reboot
Wait for the device to reboot then run these.
Code:
adb shell rm /data/local.prop
adb shell "echo ro.kernel.qemu=1 > /data/local.prop"
reboot
Now wait for the device to reboot then check if the Qemu root hack worked correctly by connecting to your device with adb shell. You should see a root prompt.
Code:
$ adb shell
[email protected]:/ #
If you see a root prompt then re-run the RunMe.bat script and it should complete without error. The reason for your permission denied error is the script is not running as root.