Related
restarted my phone at work today and all it does now is go straight to the tri colour boot loader screen. Iv take sím out, SD card out, battry out, nothing works.
Put the USB cable in and it starts on its own straight to the tri colour screen without pushing start button
Any ideas..
Thanks Ahead
Maybe it´s as easy as that the camera-button is stuck? That happened to me with the power button. Now the power button is a bit "loose" in feel but is not active all the time.
yeap
I thought of that, iv pushed the camera button quiet a few times trying to see if its stuck but it didnt help at all, still doing it. If i connect the USB cable with no battery in it starts up on its own as well and goes straight to the boot loader screen.
Its says
WING220 MFG
SPL-0.91.hard
CPLD-7
USB
update
A quick update, if i actually put the USB headphones in the phone and try to start it it works. A restart with them in works to. Take them out and its straight to bootloader again. LOL Also Windows does not recognise the phone when its conected via USB cable when its running. This seems to be a USB problem of some kind. Iv done a hard reset as well, no luck.
Try this: enter bootloader and type "boot". If it again enters bootloader after restarting do the same thing again. Hopefully that fixes it.
hehe
No change. Only way to start the phone is with the headphones connected. When the phone is running and i conect it to the pc i get this " One of the USB devises attached to this computer has malfunctioned, and windows does not recognize it "
NoNco said:
No change. Only way to start the phone is with the headphones connected
Click to expand...
Click to collapse
Try "task 8" in bootloader and then "ResetDevice"
(ps do *not* experiment with other parameters!)
nope
When i used "boot" it made a buzz and went to a white screen, had to remove battry to restart, it didnt help, tried 3 times.
" task 8 " it goes dark for a split second and back to the bootlaoder screen. remove bat. restart back to bootlaoder screen
oh after i type task 8 i get an error that pops up in mtty
wceusbsh004 port read error occured
try Hard resting it but juss to let u kno IF U DO THIS U WILL LOSE a last memory u did even phonebook and all resets like new i had to do it cuz i had a prob i could not text n stuff now it works fine after HARD RESETING
doesnt work
Iv already done the hard reset from within WM when i get the phone to work, it didnt help.
Try the hard reset after re-inserting battery immediately at power on.
(keep left- and right softkey pressed and power on I think is the key combination)
mmm
trying to do it but i must be doing the key combination wrong. Just keeps going to tri colour.
I presume you meen the soft keys on the sides of the s730. Camera key and the Comm Key.
NoNco said:
trying to do it but i must be doing the key combination wrong. Just keeps going to tri colour.
I presume you meen the soft keys on the sides of the s730. Camera key and the Comm Key.
Click to expand...
Click to collapse
No, the softkeys are the two buttons next to the joystick, see here ->IMAGE<-
But I would think your mini-USB connector is kind of broken I'm not sure of course
nope
Iv tried the keys on the side, iv tried the keys on the keypad. i just dont get it to work...
mm
@ Jocky...
I eventually managed to do a hard reset, the problem was it just kept going to the bootscreen so i tried it with the headphones pluged in and then it worked, lol, but on the reboot it just went straight back to the tri colour screen again.. So no help there.
NoNco said:
@ Jocky...
I eventually managed to do a hard reset, the problem was it just kept going to the bootscreen so i tried it with the headphones pluged in and then it worked, lol, but on the reboot it just went straight back to the tri colour screen again.. So no help there.
Click to expand...
Click to collapse
Hmm, looks like a bootflag related to USB is set. The reason could indeed be a physical problem with the usb port of the device. Also it could be related to dirty contacts (both of the UB port and the battery).
I’m having the exact same problem with my S730. Only works with the headphones plugged. I can’t hear nor talk if unplugged the headphones. Does anyone knows how to fix this ???
Started experiencing a strange issue with my tilt today..
When I soft reset it loads the Today screen, and then attempts to search for the contact 'wszx' (these keys are located next to each other). After this I can navigate the phone just fine using the touch screen, but the only buttons that work are the directional and center buttons located on the front of the phone, and the arrow keys on the keyboard. I cannot type at all using the keyboard, and pressing any of the other buttons does nothing (except the directional/center/Power). I also cannot Hard reset because the two soft-keys do absolutely nothing. I've hard reset in the past but it no longer works.
So am I SOL? I think I've tried everything.. and now I have a custom rom, etc on the phone and I have no way of getting it back to factory rom without the ability to hard reset.
Thanks for any help.
dam1en said:
Started experiencing a strange issue with my tilt today..
When I soft reset it loads the Today screen, and then attempts to search for the contact 'wszx' (these keys are located next to each other). After this I can navigate the phone just fine using the touch screen, but the only buttons that work are the directional and center buttons located on the front of the phone, and the arrow keys on the keyboard. I cannot type at all using the keyboard, and pressing any of the other buttons does nothing (except the directional/center/Power). I also cannot Hard reset because the two soft-keys do absolutely nothing. I've hard reset in the past but it no longer works.
So am I SOL? I think I've tried everything.. and now I have a custom rom, etc on the phone and I have no way of getting it back to factory rom without the ability to hard reset.
Thanks for any help.
Click to expand...
Click to collapse
Sounds like a hardware issue or simply a bad flash. Have you attempted to reflash the rom? Which rom are you using?
Well...
It wasn't working again this morning, but suddenly - out of nowhere - began to work properly. I'm stumped. If I ever figure out the exact issue I'll be sure to post back.
Thanks
Greetings,
I have same problem on my tytn...
Sometimes it suddenly starts working fine, but shortly it breaks again.
I have tried hard-reseting while it was working, but didnt help.
I think the problem appeared after charging my phone with a motorola v3 charger, so maybe it damaged my phone with over-voltage or something...
Anyway, if someone can suggest something i would be very grateful!
Hi I have exactly the same symptoms with my HTC Tytn II...when you power it on it starts typing letters (in my case CEDF). If the recording button is active it will start recording too. This happened suddenly and I haven't used any other charging apart from the usb and wall socket charger supplied with it.
All buttons (except front center key) and keyboard do not work. Any suggestions would be appreciated very much. This phone is only 8 months old.
Hi,
my Kaiser with dutty's WM6.1WWE ROM did the same this morning Yes I disabled the button 6 and stopped the voice recordings but all the hardware keys but few in the center of the keyboard are not responding. So I cant make or receive calls without taking the stylus out and touching the screen soft buttons andd that's pin in the ... while I am driving. I am using this ROM for almost a year now and I am extremely hapy (up to now) with its performance. When it all happened there were no activities on the phone - I woke up from a SMS notification (Yes I did receive an SMS from my bank) followed by repeting Voice Recordings. Any help will be highly appresiated! Thanks in advance!
keyboard problem
I am experiencing a similar problem with my stock tilt my keyboard does work however none of the text appears on the screen. I have tried hard reset and everything else I could think of, short of a clear storage reload. I would appreciate any help or suggestions from some of you more experienced users.
Bisonwill
anyone ever figure this problem out? im having the same thing happen now.
Same here
I've had it for a couple of weeks now.
I'm running WM6.1 from HTC (rom ver.3.29.422.1 from 2009-01-12) so nothing fancy here.
I even ordered and replaced the D-Pad and I replaced the keyboard (just the sticky part though). I totaly dismantled the phone and didn't find any issues with the cables.
Any ideas would be highly appreciated
Join the club!
This is crazy. My problem is exactly the same. I re-romed to the latest phoenix and it did not change a thing.
Help!
help....
any body here found a solution for the keypad/keyboard yet??? i have the same problem as you guys... any idea, thanks so much...
i have the same problem And there is something else. My Kaiser wakes up every 2 minutes - it's killing the battery. It works only for 6 hours now
Help
bump!!!
No more people with this issue or any solutions?
Pls! Help
ive joined the gang!
I decided to flash my cooked rom ive been working on.
i hadnt changed much in the kitchen and i think the flash has went badly.
it starts booting windows and where it should state "calibrate screen" it goes white and hangs there, buttons seem to respond by lighting up when pressed.
Now when i try to get it into bootloader or even hard reset it just doesnt work.
it just restarts the phone.
before this happened the backspace key hasnt been working for ages.
anybody got any ideas??
(lucky for me i have a backup kaiser!)
I'm having the same problem. Automatic wakeup, applications starting automatically, can't use keyboard, have to to use screen to use phone etc. I've hardreset using the clear storage method, reflashed a couple of times, but nothing helped. So here I am joining the club
If it's not a hardware issue, then try to flash another radio, many of the custom ROMs here doesn't include a radio, so if it's caused by a wrong radio, flash a new ROM without a radio doesn't help.
Check the Sticky for 'how to' if not aware.
PS: Check here for something need to know..
The question is.... how do I flash the device if I cant get it to go to boot loader and the OS wont boot properly !?
I think its an official Brick!
the really odd thing I've discovered is sometimes the OS leaves the loading screen on, and when it does if I press the FN and folder key, I get explorer up but its not responding... I haven't tried inserting a memory card yet to see if I can access that.
Danhargreaves said:
The question is.... how do I flash the device if I cant get it to go to boot loader and the OS wont boot properly !?
I think its an official Brick!
the really odd thing I've discovered is sometimes the OS leaves the loading screen on, and when it does if I press the FN and folder key, I get explorer up but its not responding... I haven't tried inserting a memory card yet to see if I can access that.
Click to expand...
Click to collapse
Try this:
1. Take out the battery from the phone.
2. Take out SIM card and SD card.
3. Press in and hold the CAMERA button.
4. Plugin to your computer using the USB cable, while keep holding press in the CAMERA button.
See does it enter the BOOTLOADER mode.
Once entered the BOOTLOADER mode, you can flash a new radio or rom right from there, in your regular way of running KaiserCustomRUU.exe.(Since you already have a HardSPL flashed on, otherwise a HardSPL is needed to flash first.)
Good luck.
Edit: If the power button and the camera button is still working, you can use the regular way of entering BOOTLOADER mode, and flash from bootloader mode or flash from SD card.
Originally posted by Manpreet @ www.sakajati.com
To enter in bootloader mode:
Simply Switch off your phone. Press and hold camera button and also press and hold the power button..You can remove ur finger from power button when phone is switched on but keep holding camera button until u come to bootloader …Now attach the usb to ur computer and do the flashing you normally do.
Click to expand...
Click to collapse
Thx for your suggestion:
I tried removing battery as sim and sd were already removed due to previous attempts in fixing!
so:
i removed battery (did not put back in), plugged in while holding camera
got nothing, so held power button at same time, the green light came on, then went off, and came back on again. but no bootloader.
i tried same procedure with battery in, and all i get is the OS loading up, no bootloader no matter how long i hold the buttons.
is there any other alternative method to get into bootloader (possibly involving other button presses)?
or any other ideas.
Really want to fix this as it was my "experimental" phone for cooking roms with.
Thanks again.
Suspect you have some hardware issue with the camera button. Can you ever take a photo with it?
Edit: Did you read through every post onthis thread:
MTTY (How to fix a bad ROM flash!)
If you tried that and still no luck, you can post your questions there. There are masters will keep an eye on that thread. And generally they only have time to look into their 'subscribed' threads, chances are they will not look into here.
Edit: Maybe the procedure I told is wrong, since I call from memory, check this:
dwny said:
If you have a bad flash....that's no reason to worry.
I haven't had to use MTTY to recover.
In most cases, if there's no issues with the Rom itself...you can pop out the battery and re-flash the same ROM from BootLoader Mode. This will also work if for some reason your computer crashes or loses power & restart during the FLASH.
If the Rom has issues.....the flash will not complete and the device will be stuck in BootLoader Mode. At this point,you must FLASH a FACTORY ROM!!
Pop the battery off 1st, power up the device, device will power up in BootLoader Mode, connect to pc & FLASH your devices FACTORY ROM. This will restore your device back to it's original out the box settings.
The above only works if the device has been put through the Hard SPL or SuperCID process.
I personally have never tried to flash a cooked ROM without unlocking any of my devices. From what I've read what others have experienced...the flash would just fail and they're stuck in BootLoader Mode.
Myself ... I've experienced bad flashes, bad cooked roms that I've cooked, lost power to a pc & had my pc crash during a flash. Listed above is how I've recovered. There is life after Bootloader Mode.
The only time you have to worry is if your device does not power up at all
As a public chef...it's your responsibility to set the parameters of your ROM! Meaning, Radio, HardSPL, program conflicts, etc.
You are not ultimately responsible if someone bricks their phone but if they pushed the issue, you could be hit with some form of liabilty because you failed on providing a simple Disclaimer that sets the expectation.
I hope I've been helpful.....
Click to expand...
Click to collapse
Edit again:
And try like:
Plug in USB first, and thenn press & hold Camera, Power button etc.
I remember once I read there is a way to enter bootloader without battery, just can not find the original again.
Hello, i just got a Treo 750 that just freezes a boot up, i can see logo at start and charging bar, but at the end of charging bar sudently stops, im looking a way for flashing it but i cant by usb because pc doesnt detect in this state, in boot mode it does detects but doesnt flash, im just begining with this, im pretty new flashing this kind of phone, if somebody can help me to solve this i would be thankfull.
BR. Masterunlocking
hey im having the same problem, i thhink theres a way to flash it using a bootup method from the phone but it hasnt been working for me. theres a link here http://rapidshare.com/files/89355384/Treo750_WM6.1_WWE_Lite.rar
but i tried it out just leaves my phone in the rainbow screen, dont think its installing anything. maybe you can give it a try see if it works. found the link on this on this page 3rd post http://forum.xda-developers.com/showthread.php?t=441785
if anyone can help with the install of 6.1 using this method, i was already on 6.1
GOT IT!! check this link out, all you need to do for a hard reset is hold the red power button and press the reset button which is right by the memory card slot just pull up the memory card cover and youll spot it, just press it with the stylus. keep holding the power button till you get the option to erase all your data and press up
http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,kb=PalmSupportKB,t=ooccase,case=obj(887)#hard
Hi
It's not the first time I flash my TytnII, but this time, I get worry about my phone...
I've tried to put the kaiser_wwe_shifu_v3.0 rom's.
According to doc, I've upgraded Radio and Hard SPL.
Radio is 1.70.19.09
Hard SPL is 3.29.
The upgrade of ROM was OK, but some stranges things appened therefore. The first boot, OK the device is configuring itself, and rebooting.
After the first reboot, the device is still "fresh installed"! So here we go another time to pre-configure it...(time, touch screen...)
After, it seems to be OK, but in fact, I see there's no more memory to completely startup the phone. Because the phone starts, but finally, a program (don't remember which one) says that it cannot start because lack of memory...)
I reboot, and since, me phone doesn't boot at all....
It display the startup page with radio , hard SPL infos, but no more, it seems to be completly block on these steps.
What could I do?
Thanks a lot
Have you tried to flash another ROM?
You can try this bij holding camera button while booting, you should see the tri-color screen. Connect it to your PC and try to flash again or another (maybe stock-rom?) ROM.
Good luck
No funny multi color screeen appears when pressing camera button while booting...
Can't connect a cd reader on it, and erase flash
thanks
Do a hard reset and see if that works, hard reset is hold down left and right softkeys and and hold in reset button with stylus until you get to a screen about resetting the phone, remember to back up any data on phone memory cos you will lose this after a hard reset
I want to second this problem.
After flashing the Radio to "KAIS_RADIO_ONLY_1.71.09.01" and installing PDA corners newest ROM, everything worked fine. The only bug was that when I wanted to turn off the device by holding the power button, after choosing the turn-off option, it just restarted.
Now the phone doesn't start at all. Seems as if there is no power from the battery, while there was enough charge in it. When I connect it to the power plug, the charging/power led turns almost red, never saw that before.
This is not my first ROM-update, but this is the first time I've encountered this problem.
I tried hard and soft resets, removed the battery, tried to connect it to the pc, nothing worked.
Any ideas?
Thanks.
Press and hold the camera and the power/ on buttons. While ho[ding both buttons, do a soft reset. Once in bootloader ( tri color ) flash your original stock rom.
What I already tried:
- hard and soft resets
- removed the battery
- tried to connect it to the pc
- connected in the power plug, nothing worked.
- tried the power button+camera+soft reset
I download the the same Rom....I I have the same problem.... I Reset with Pressing Camera and Power method....it went to the Hardspl screen and I load a new ROM...its working fine now.
Hello,
I have here a diamond unit, that client complained about this issue from months ago.
Volume key (-) doesn´t seem to function correctly.
As so he can´t enter in bootloader by pressing volume key(-) + power button.
The problem is that phone is now stuck at WM startup. And I can´t put it in bootloader to flash it.
He´s stuck at tap screen align, just random reset itself.
I can hear the sound of USB connection with PC, but not fully connected to activesync, so back again, can´t detect himself to start RUU process.
I need some ideas...
BTW: Yes I know where the problem of volume key is. It´s on the PCB board connector with flex. But can´t fix here at home, will need wait few days to come into the office and try repair. Meanwhile would be awesome to be able to flash it and put it at normal work again.
Drug_Store said:
Hello,
I have here a diamond unit, that client complained about this issue from months ago.
Volume key (-) doesn´t seem to function correctly.
As so he can´t enter in bootloader by pressing volume key(-) + power button.
The problem is that phone is now stuck at WM startup. And I can´t put it in bootloader to flash it.
He´s stuck at tap screen align, just random reset itself.
I can hear the sound of USB connection with PC, but not fully connected to activesync, so back again, can´t detect himself to start RUU process.
I need some ideas...
BTW: Yes I know where the problem of volume key is. It´s on the PCB board connector with flex. But can´t fix here at home, will need wait few days to come into the office and try repair. Meanwhile would be awesome to be able to flash it and put it at normal work again.
Click to expand...
Click to collapse
If you can boot windows look in my signature there is a Boot loader tool and it works on diamond i have tested it
Also there is a post for forced boot loader mode for htc prophet\wizard involves connecting power to pins manually will this work for Diamond ?
Ok finally fixed it
Explored the thing about hearing USB connecting... WIN7 would never been possible, but under XP and activesync, that was enough to connect and flash.
@wapvirus
Yes, I thought about power pinout, but could require advanced tools, which I don´t have at home...