Hey, I just wanted to confirm that I will be taking all of the proper steps in putting CyanogenMod 3.6.8.1. Here's what I will be doing (I'm going to start from complete scratch - figured it would help a bit):
CURRENTLY ON JF1.51 CRB43
-------------------------------
Repartitioning 8GB Class 4 card with 700MB Ext2
Reverting back to RC29 via DREAIMG.nhb
Flashing recovery image in terminal
Installing HardSPL through recovery console
Installing JF1.51 ROM (Heard its smart to do this first)
Installing HTC Radio from http://www.htc.com/www/support/android/adp.html
Installing Cyanogen Recovery Console
Flashing CyanogenMod 3.6.8.1 ROM
Recovery console: upgrade_fs (EXT2 -> EXT3)
-----------------------
QUESTIONS THAT I HAVE
-----------------------
Will this ROM smoothly support the modified Rosie.apk from
http://forum.xda-developers.com/showthread.php?t=532822 ?
Am I correct in assuming I do not need to install the Haykuro SPL?
Should I use Compcache from http://forum.xda-developers.com/showthread.php?t=537236 ? I have no experience whatsoever with swap files
Am I correct in assuming that I do not need to manually set up Apps2SD?
And most importantly: DID I MISS ANY CRUCIAL STEPS THAT I WILL REGRET DOWN THE LINE? Dont believe so, but better safe than sorry!!
Thanks every so much!!!!!!!!!!!
Oh, I will be using Paragon Partition manager to partition MicroSD card if that makes a difference
you shouldnt have to redo all the steps. just wipe and flash his rom. also to my knowledge rosie will not run on a non-hero rom. you do not need haykuro's spl. i have put cm rom on phones straight from rc-29 with no problems. i do not know how to use paragon, but it is very easy to partition an sdcard through cyanogens 1.3.1 recovery. apps2sd is automatic with his rom. if it feels slow you can use compache but do not have to if you do not feel you need to. if you do want to go through the steps you have listed then you are set. hope i was able to answer some of your questions
Your ext2 partition is really large. 500MB should be well enough.
torturedsoul802 said:
Hey, I just wanted to confirm that I will be taking all of the proper steps in putting CyanogenMod 3.6.8.1. Here's what I will be doing (I'm going to start from complete scratch - figured it would help a bit):
CURRENTLY ON JF1.51 CRB43
-------------------------------
Repartitioning 8GB Class 4 card with 700MB Ext2
Reverting back to RC29 via DREAIMG.nhb
Flashing recovery image in terminal
Installing HardSPL through recovery console
Installing JF1.51 ROM (Heard its smart to do this first)
Installing HTC Radio from http://www.htc.com/www/support/android/adp.html
Installing Cyanogen Recovery Console
Flashing CyanogenMod 3.6.8.1 ROM
Recovery console: upgrade_fs (EXT2 -> EXT3)
-----------------------
QUESTIONS THAT I HAVE
-----------------------
Will this ROM smoothly support the modified Rosie.apk from
http://forum.xda-developers.com/showthread.php?t=532822 ?
Am I correct in assuming I do not need to install the Haykuro SPL?
Should I use Compcache from http://forum.xda-developers.com/showthread.php?t=537236 ? I have no experience whatsoever with swap files
Am I correct in assuming that I do not need to manually set up Apps2SD?
And most importantly: DID I MISS ANY CRUCIAL STEPS THAT I WILL REGRET DOWN THE LINE? Dont believe so, but better safe than sorry!!
Thanks every so much!!!!!!!!!!!
Click to expand...
Click to collapse
It sounds like you are coming from a brand new g1. If you already have root i wouldnt go back to RC29. And really dont see a point in installing JF 1.51 if your going to cyanogens. You'll just wipe it off anyways.
1. I suggest installing the Cyan's Recovery image first.
2. Then the newest radio and SPL.
3. Make sure you have adb setup (it makes things way easier)
if you want to run cyanogens i suggest 3 partitions although ive heard you can get by with 2. The 3 partitions are generally fat32, ext2/3/4 (2 or 3 is fine and usually is around 500 MB) and a linux-swap partition which is usually around 32 MB, and whatevers left out of your space on your sd card goes to your fat32.
4. If you want to upgrade from ext2 to ext3 then do the upgrade_fs
5. Use ADB and push over the update file or if you have a SD card reader i think you can do it that way.
6. Boot into recovery and do an alt-w (wipe) and alt-s (apply update).
7. Should be good to go from there.
Now for your questions:
1. No you dont need hykuro's SPL (sorry if i mis-spelled i dont use)
2. I personally do not use compcache and it runs ridiculously fast ( I do use linux swap)
3. As far as steps you may have missed. I believe the suggested advice is radio first then spl.
Lastly: There are guides and links to all the files you need right here on XDA. Use the search function as much as possible and the community will be glad to help out. If you have any questions you can get my contact info out of my profile, ill help as i can (im still pretty new to this).
Disclaimer: I AM NOT RESPONCIBLE FOR ANY BAD ADVICE THAT MAY OR MAY NOT LEAD TO THE BRICKING OF YOUR DEVICE.
Thanks for the replies everyone! Flashing it now, I'll report back on how it runs!
I'll be doing this tomorrow as well. Pretty straightforward.
Its so damned fast!!! lol It really feels like things open before I even push the button sometimes!
Many many thanks Cyanogen!!!!!!!!!!!!!!
I always love a happy ending.
Another happy root user = possible next gen dev!
All I would of recommended was installing his Recovery image 1.31 and running a nandroid backup just incase you want to revert back to your old build.
Done and done
New sig speaks for itself...its ultra sexy (screenshots to follow once I find an old apk)
Is there a thread anywhere for the installation of CyanogenMod specifically? I am afraid most of the threads of instructions are for Hero based roms. I am wondering if I need to partition my SD first,and what partition sizes and types. Also wonder if I need new radio and SPL for his ROM, and when to install the 1.4 recovery.
Basically confused with all the different guides for so many ROMs, and many assume the phone is already rooted and running a hacked ROM.
Thanks!!
im also assuming your phone is rooted? if not go here.
http://forum.xda-developers.com/showthread.php?t=442480
you can install the recovery whenever you want.
partitioning sizes are based on your card size, i have a 4gb with 500mb ext3, the rest is fat32. i wouldnt go past that but ive seen a couple people with a gig. i just think its a waste, im starting to think my 500 is a waste honestly.
flash the radio THEN the spl, then the rom. cyanogen i believe uses bind mounts. you wont have to set up anything, itll do it all on its own as long as you have a ext2/3/4 partition set up CORRECTLY.
anon1ski said:
im also assuming your phone is rooted? if not go here.
http://forum.xda-developers.com/showthread.php?t=442480
you can install the recovery whenever you want.
partitioning sizes are based on your card size, i have a 4gb with 500mb ext3, the rest is fat32. i wouldnt go past that but ive seen a couple people with a gig. i just think its a waste, im starting to think my 500 is a waste honestly.
flash the radio THEN the spl, then the rom. cyanogen i believe uses bind mounts. you wont have to set up anything, itll do it all on its own as long as you have a ext2/3/4 partition set up CORRECTLY.
Click to expand...
Click to collapse
No need to flash the new SPL.
No SPL? So all I need to do is follow instructions to root the phone, partition my SD and flash Cynogenmod ROM? I have an 8 gig SD on its way class 6.
The root directions at the link state to only format the SD as fat "Format your phone's SD card to FAT32 mode", but you mentioned partitioning with a ext partiton and a fat? No swap partition required?
captsammy said:
No SPL? So all I need to do is follow instructions to root the phone, partition my SD and flash Cynogenmod ROM? I have an 8 gig SD on its way class 6.
Click to expand...
Click to collapse
Yup just root partition, flash radio and flash cyanogenmod. No need to flash new spl. Hard spl is fine.
captsammy said:
The root directions at the link state to only format the SD as fat "Format your phone's SD card to FAT32 mode", but you mentioned partitioning with a ext partiton and a fat?
Click to expand...
Click to collapse
yes you have to have an ext partition. cyanogens roms have an auto apps2sd built in. you dont have to do anything BESIDES partition it to get a2sd to work on it.
No need to flash new spl. Hard spl is fine.
Click to expand...
Click to collapse
So is Hard SPL already on the stock phone? Sorry to sound the TOTAL noob, but your first line states that all that is needed is the new radio and CynogenMod, then you mention the flashing of SPL. Is there a "best" SPL? Not sure what the SPL is.
captsammy said:
So is Hard SPL already on the stock phone? Sorry to sound the TOTAL noob, but your first line states that all that is needed is the new radio and CynogenMod, then you mention the flashing of SPL. Is there a "best" SPL? Not sure what the SPL is.
Click to expand...
Click to collapse
No, Hard SPL is not included in the stock phone.
SPLs for DREA100 & DREA110 (Orig, Eng, Hard) [updated 5/12/09]
Great thread about SPL's
Get the though of "Best" out of your head. Think of what will work well with everything put together
i have a g1 and i have managed to root it. i have the cyanogen recovery flash 1.4 on and rom 4.1.1.1 and ts really running good. But i want to change my rom to hero but every hero rom i put on it gets to the htc and thens reboots. i rewipe so many times and still no joy but the cyanogen works well. please can someone help as i really like the hero rom. thanks
Rawdi said:
i have a g1 and i have managed to root it. i have the cyanogen recovery flash 1.4 on and rom 4.1.1.1 and ts really running good. But i want to change my rom to hero but every hero rom i put on it gets to the htc and thens reboots. i rewipe so many times and still no joy but the cyanogen works well. please can someone help as i really like the hero rom. thanks
Click to expand...
Click to collapse
reformat the sd card and follow the dirrection very closely
jenol said:
reformat the sd card and follow the dirrection very closely
Click to expand...
Click to collapse
I have tryed that but still it doesn't work. Can you direct me on trying something else please. Many thanks
1.Are your partitions set up correctly? fat32/ext2/swap? When in doubt, backup and reformat all partitions.
2.Which radio/SPL are you using?
3. Which ROM is it you are trying to use? Some require different things to be set up properly.
knowfear said:
1.Are your partitions set up correctly? fat32/ext2/swap? When in doubt, backup and reformat all partitions.
2.Which radio/SPL are you using?
3. Which ROM is it you are trying to use? Some require different things to be set up properly.
Click to expand...
Click to collapse
1.I have the partion set up fat32/ext2/linex I have formated the fat32 but don't know how format the ext2 and linex. How do u do this?
2. I have the 261 radio and can't remember the SPL but I have gone through the steps in the forum on how to root the g1. I even flashed my g1 again. I have a 32b motherboard. That's what it says when I hold the camera and on button.
3. I have tryed many JAChero roms and even the heroblur one. But can't seem to get it working. Do I have to have a class 6 sd card? Or can I work on a class 2?
Rawdi said:
1.I have the partion set up fat32/ext2/linex I have formated the fat32 but don't know how format the ext2 and linex. How do u do this?
2. I have the 261 radio and can't remember the SPL but I have gone through the steps in the forum on how to root the g1. I even flashed my g1 again. I have a 32b motherboard. That's what it says when I hold the camera and on button.
3. I have tryed many JAChero roms and even the heroblur one. But can't seem to get it working. Do I have to have a class 6 sd card? Or can I work on a class 2?
Click to expand...
Click to collapse
When you went to bootloader mode and saw you had a 32B board it would show your spl there. But most likely you need to wipe your ext partition. And I would suggest upgrading from ext2 to ext3.
Rawdi said:
i have a g1 and i have managed to root it. i have the cyanogen recovery flash 1.4 on and rom 4.1.1.1 and ts really running good. But i want to change my rom to hero but every hero rom i put on it gets to the htc and thens reboots. i rewipe so many times and still no joy but the cyanogen works well. please can someone help as i really like the hero rom. thanks
Click to expand...
Click to collapse
did u wipe your ext3 in console before flashing
you may want to clear your davlik-cache.
from terminal
Code:
su
cd /system/sd/davlik-cache
rm *
exit
exit
If you have ADB set up you can format your ext partition as follows (quoted from a different post)
Code:
adb remount
adb shell
rm -r /system/sd/*
reboot recovery
then flash your update
If I were you, I would back up my sd card to your computer and format the entire thing setting up all of your new partitions using parted from the recovery. Also make sure you remember to upgrade_fs after doing it.
My guess is that you have the wrong SPL. However, be very careful in changing the SPL--make sure that your phone is compatible (check the threads).
derfolo said:
My guess is that you have the wrong SPL. However, be very careful in changing the SPL--make sure that your phone is compatible (check the threads).
Click to expand...
Click to collapse
i do have the 1.33.2005 spl. i have bought a class 6 sd card. formatted card and partitioned it now installing jachero2.2b. do u recommend or what rom do fink is the fast and stable one.
I have no reason to recommend against the jachero, but I don't run Hero ROMs. Do you have adb installed? If so, when you are booting your phone, run "adb logcat" on your computer. Post what you see when the reboot happens and someone may be able to offer more help.
Rawdi said:
i do have the 1.33.2005 spl. i have bought a class 6 sd card. formatted card and partitioned it now installing jachero2.2b. do u recommend or what rom do fink is the fast and stable one.
Click to expand...
Click to collapse
hero2 1.5.1 run fast without bugs. pretty much some hero roms after 1.5.1 contain people search fc, no audio for recoring
derfolo said:
I have no reason to recommend against the jachero, but I don't run Hero ROMs. Do you have adb installed? If so, when you are booting your phone, run "adb logcat" on your computer. Post what you see when the reboot happens and someone may be able to offer more help.
Click to expand...
Click to collapse
yeaaaaaaaaaaaaaa, its working. its running now and i am going to see if it runs smooth and fast. many thanks to all of guys that has advised me on what to do. i really am grateful
So i ordered a new Class 6 SD Card.
Before this i was on the stock 1GB SD card that came with the G1 with an ext2 partition, and running the latest Cyan mod.
Basically i was just wondering what i need to do when my new card comes. I know i need to partition it to FAT32, and then i was gonna do ext3, and a linux swap. Can i just use sdparted script to do this?
And finally i was gonna try a Hero rom now that i have the SD card that is actually capable of running it. I push it with adb and just flash after partitioning, right?
Is there any way of getting my apps back or am i going to have reinstall everything again? I don't REALLY mind doing all over again, but it'd be nice not to have to. And if it's possible, how?
Thanks for any help/clarification...
dear ally,
there is a app that allows you to back up apps..
p.s. i apologize im not a native speaker..of how do u say..umm ur motherlan
Yes.
First re-partition the card using parted from the recovery menu or using the Amon-Ra Recovery. There are instructions for that littered everywhere in the Q&A and the Developer's forum, just use the search.
To use the Hero ROMs you need to flash the Danger SPL unless you plan on using MicroHero with HardSPL. If you want to use any of the new Hero ROMs they will require the Danger SPL and note the bold. Look up the proper instructions for flashing the SPL before actually diving in.
And no. You don't need to re-install everything. Just use switchrom or BART to make a backup as it will also make a backup of your ext partition. After backing up, just restore it after transferring everything from the FAT32 partition of your old sdcard to the new one.
I just checked and i have 1.33.2005 SPL. I believe that's the correct one, right?
I just tried to push Bart to system/sd...i'm pretty sure i did it right but when i try to store my ext it says it can't open the file.
What am i doing wrong?
Check this out
Basket Lotioner said:
Check this out
Click to expand...
Click to collapse
Thank you very much...that seems to have worked
I really like this recovery image too
No problem man, glad to have helped.
Download Amon_Ra's new recovery image and look for the 3 way partition option...once partioned, do a data wipe, drag and drop your rom of choice in .zip format onto the root of your sd card and rename it to "update"
Backup for Root users works well for restoring your apps. it can be found in the marketplace. I believe there is a donate version and a free version.
Alright, now I know this question has almost certainly been asked before, but before you start raging at me, I have spent a good few hours looking around on here and other places, but I haven't found all of the information I'd like. Also, I find that people giving you their personal experience directly is more helpful anyway.
So, I got given a G1 the other day, and immediately started thinking about modding and rooting it, etc. The stock 1.6 was alright, but it wasn't too snappy and I wanted to try out different versions anyway. So I went ahead and:
Rooted my phone
Installed Amon_Ra's Recovery Image v.1.7.0
Flashed the radio to 2.22.19.26i
Installed DangerSPL
After I'd done all that, I went ahead and installed CyanogenMod 5, to try out 2.1 first. It seemed OK, but it was definitely slower than 1.6 by a fair amount. I then flashed to CM 6 and found it to be quicker, but still too slow for my liking. So I flashed to CM 4 instead, which was definitely more like it. I don't actually find myself missing many features from Android 2.0+ if I'm honest, but the OS STILL isn't as fast as I'd like. I know I can get it quicker.
I've removed all of the apps that I don't use (including some of the Google ones - I forgot to mention that I installed Google Apps too) to help free up some of the internal memory. I have a Kingston 4GB class 4 microSDHC card, but I understand that running apps from the SD card is going to be slower than from the internal ROM, so I'd rather keep all the apps on there.
I bought SetCPU, but I can't figure out how to configure it properly. The maximum speed I can set the CPU to is 528MHz, which is stock speed.
I'm using the stock launcher (which seems to have inserted 5 home screens - I only need 3) because I don't know if ADW Launcher or LauncherPro will be quicker. I have a few widgets and shortcuts, but not a ton. I use Opera Mini for browsing as I found Opera Mobile to be too slow when scrolling about and so on, and the stock browser to be even slower.
So basically my question is this: what things have you guys done to speed up your G1?
One thing I should mention is that I'm fine with most of the features of 1.6, but obviously I will upgrade to a later version of Android if there is a ROM/configuration that will be nice and snappy.
Thanks in advance, and sorry for the very long post.
if you are italian, there is a rom called padronfroyo that i find it the fastest one!
netterharrison said:
if you are italian, there is a rom called padronfroyo that i find it the fastest one!
Click to expand...
Click to collapse
Thanks for the reply, unfortunately I am British though.
Try froyo by lazlo, very fast and stable rom.
Try overclocking to 576 mhz in the rom performance settings. Also, try tweaking the performance settings(compcache, jit, vm heap size, etc) until you find the fastest ones. I also use an app called cache cleaner to remove all the cache on my phone from the browser and such. I also use sdext to install apps on my sd and run them from there as well.Personally, I use adw ex because it has all the cool features and it is amazingly fast. I'm currently using cos-ds gingerbread and my phone is snappy as hell. But in your case try froyo by lazlo, in the g1 development forum.
Sent from my HTC Dream using XDA App
im using a donut rom with the latest radio and it flyyys
Thanks for the replies guys. I think I'll try Froyo by Lazlo first, but how would I go about switching? Nandroid will backup my current ROM right? And then I will need to backup my apps with Titanium Backup or similar, and my contacts, etc.
When I wipe the system using the recovery, which options do I use? Because I remember there are several options for what you can wipe, but I'm not sure which ones I need to use.
And then I can just go ahead and flash the ROM using "flash zip from SD card" or whatever the option is called?
EDIT: Oh, and what's this about the SPL and the radio? I have DangerSPL installed and the radio is 2.22.19.26i
ellisbodds said:
Thanks for the replies guys. I think I'll try Froyo by Lazlo first, but how would I go about switching? Nandroid will backup my current ROM right? And then I will need to backup my apps with Titanium Backup or similar, and my contacts, etc.
When I wipe the system using the recovery, which options do I use? Because I remember there are several options for what you can wipe, but I'm not sure which ones I need to use.
And then I can just go ahead and flash the ROM using "flash zip from SD card" or whatever the option is called?
EDIT: Oh, and what's this about the SPL and the radio? I have DangerSPL installed and the radio is 2.22.19.26i
Click to expand...
Click to collapse
you wont be able to flash froyo by lazslo on that radio.. you need 2.22.27.09/28.25 and hboot 1.33.0013d
and if you have your apps saves to the ext partition of your sd than nandroid will back it up, or just do a bart backup!
when you install a new rom you want to wipe all data!! ALL DATA!! lol wipe data, cache, dalvik cache, sd partition, etc.. be sure to repair sd also.
ldrifta said:
you wont be able to flash froyo by lazslo on that radio.. you need 2.22.27.09/28.25 and hboot 1.33.0013d
and if you have your apps saves to the ext partition of your sd than nandroid will back it up, or just do a bart backup!
when you install a new rom you want to wipe all data!! ALL DATA!! lol wipe data, cache, dalvik cache, sd partition, etc.. be sure to repair sd also.
Click to expand...
Click to collapse
OK. Well, I think everything's backed up now.
When I choose to wipe SD:ext partition though, will that wipe all the data on my SD or just the ext folder or something? What does the ext folder even contain?
Which radio would I need for a UK G1? Or how do I find out which one I need? And how do I flash the radio and hboot?
Thanks
ellisbodds said:
OK. Well, I think everything's backed up now.
When I choose to wipe SD:ext partition though, will that wipe all the data on my SD or just the ext folder or something? What does the ext folder even contain?
Which radio would I need for a UK G1? Or how do I find out which one I need? And how do I flash the radio and hboot?
Thanks
Click to expand...
Click to collapse
Best way to wipe for a clean install is using Ohsaka's Superwipe here Wiping sd:ext affects the ext partition only. If you are using appstoext, or magpie, you can store apps on ext.
The latest radio is 2825. Flashing radio and hboot is best done through fastboot,lower chances of bricking, much2 safer than flashing em through recovery. The guide on how to flash the radio and hboot is at my signature, try to read the instruction a few times and fully understand it before you start flashing, gluck!
Sent from my G1
azrash said:
Best way to wipe for a clean install is using Ohsaka's Superwipe here Wiping sd:ext affects the ext partition only. If you are using appstoext, or magpie, you can store apps on ext.
The latest radio is 2825. Flashing radio and hboot is best done through fastboot,lower chances of bricking, much2 safer than flashing em through recovery. The guide on how to flash the radio and hboot is at my signature, try to read the instruction a few times and fully understand it before you start flashing, gluck!
Sent from my G1
Click to expand...
Click to collapse
Excellent, thanks.
I still have a couple of questions though.
Do I need to flash the recovery image? The version in that thread is recovery-RA-dream-v1.7.0-cyan.img, and I think mine is the same (it's definitely v1.7.0) just without the "cyan" bit on the end.
I'm a bit confused as to what radio I need to use. I'm in the UK, using a UK G1, and I thought I needed a different radio to US users? Am I using this one?
New Alternative radio: RADIO-2.22.28.25.img
Click to expand...
Click to collapse
Or do I use 27.08?
How do I do this?
3) flash the files and other operations via fastboot
Click to expand...
Click to collapse
I can't find a console or anywhere to input the data when in fastboot. I'm currently using 1.33.2005.
Do I wipe everything before flashing the radio and hboot, or in between doing that and installing the new rom?
Cheers
EDIT: Oh, and Froyo by Laszlo says that I need an ext4 partition. Is this on my SD card or on the phone? And how do I create one? Thanks
ellisbodds said:
Excellent, thanks.
I still have a couple of questions though.
Do I need to flash the recovery image? The version in that thread is recovery-RA-dream-v1.7.0-cyan.img, and I think mine is the same (it's definitely v1.7.0) just without the "cyan" bit on the end.
Click to expand...
Click to collapse
yes you would still need to flash a recovery. the cyan bit at the end just denotes a cyan themed recovery, the exact same recovery but blue. you can flash the normal amonra 1.7 recovery
I'm a bit confused as to what radio I need to use. I'm in the UK, using a UK G1, and I thought I needed a different radio to US users? Am I using this one?
Or do I use 27.08?
Click to expand...
Click to collapse
use the 2825 radio, it is the latest and works everywhere. remember to follow the guide step by step, do not skip/change the steps, it must be done in order
How do I do this?
I can't find a console or anywhere to input the data when in fastboot. I'm currently using 1.33.2005.
Do I wipe everything before flashing the radio and hboot, or in between doing that and installing the new rom?
Click to expand...
Click to collapse
fastboot is done via PC from command prompt, check here for a guide on how to setup fastboot http://forum.xda-developers.com/showthread.php?t=532719
it might seem tedious and long but trust me, it is very useful, you will use it a lot. just do a superwipe after you have upgraded the whole radio+hboot thing. remember to power down first once you have superwiped
EDIT: Oh, and Froyo by Laszlo says that I need an ext4 partition. Is this on my SD card or on the phone? And how do I create one? Thanks
Click to expand...
Click to collapse
ext is in sd card. this is done in recovery, go to partition SD, enter your desired size(depending on your sd card size, 200mb for ext should be enough, im using an 8gb sd card, so i set my ext to 600mb) and once you have partitioned, just select upgrade ext2 to ext3 and then ext3 to ext4. partitioning will erase your entire sd card, so remember to copy the content to your PC first
hope it helps
azrash said:
yes you would still need to flash a recovery. the cyan bit at the end just denotes a cyan themed recovery, the exact same recovery but blue. you can flash the normal amonra 1.7 recovery
Click to expand...
Click to collapse
Even though I already have normal 1.7 installed I need to flash it again?
use the 2825 radio, it is the latest and works everywhere. remember to follow the guide step by step, do not skip/change the steps, it must be done in order
Click to expand...
Click to collapse
Gotcha
EDIT: The 28.25 radio is in a zip which contains the .img and a bunch of other stuff as well. Do I just need the img or do I need to dump the whole zip on my SD?
fastboot is done via PC from command prompt, check here for a guide on how to setup fastboot http://forum.xda-developers.com/showthread.php?t=532719
it might seem tedious and long but trust me, it is very useful, you will use it a lot.
Click to expand...
Click to collapse
EDIT: ADB and fastboot are now up and running on my system.
just do a superwipe after you have upgraded the whole radio+hboot thing. remember to power down first once you have superwiped
Click to expand...
Click to collapse
superwipe = go through all of the options and wipe all of them, I guess?
ext is in sd card. this is done in recovery, go to partition SD, enter your desired size(depending on your sd card size, 200mb for ext should be enough, im using an 8gb sd card, so i set my ext to 600mb) and once you have partitioned, just select upgrade ext2 to ext3 and then ext3 to ext4. partitioning will erase your entire sd card, so remember to copy the content to your PC first
Click to expand...
Click to collapse
So when would I do this then? After flashing the radio and SPL and before flashing the ROM, I would imagine?
EDIT: What size would you recommend for a 4GB card?
hope it helps
Click to expand...
Click to collapse
It did help, and you've been very helpful in all your posts. There's just so much I have to learn.
ellisbodds said:
Even though I already have normal 1.7 installed I need to flash it again?
Click to expand...
Click to collapse
No if you already have Amon Ra 1.7 recovery on your phone then you dont have to reflash it. But if you want to reflash it, it wont hurt to do so.
ellisbodds said:
Gotcha
EDIT: The 28.25 radio is in a zip which contains the .img and a bunch of other stuff as well. Do I just need the img or do I need to dump the whole zip on my SD?
Click to expand...
Click to collapse
No just the dump the whole zip file on to your sd card.
ellisbodds said:
EDIT: ADB and fastboot are now up and running on my system.
superwipe = go through all of the options and wipe all of them, I guess?
Click to expand...
Click to collapse
superwipe is this:http://forum.xda-developers.com/showthread.php?t=834812&highlight=superwipe
Download version two, and put the whole zip file onto your sd card. You would flash this through the "flash a zip file" option in recovery.
It allows you to wipe everything instantaneously. Make sure to make a Nandroid backup before you flash it though.
ellisbodds said:
So when would I do this then? After flashing the radio and SPL and before flashing the ROM, I would imagine?
Click to expand...
Click to collapse
Yes you are correct.
ellisbodds said:
EDIT: What size would you recommend for a 4GB card?
Click to expand...
Click to collapse
*Remember to backup your entire sd card to your computer because it will be entirely wiped out.
These are my recommended partiton sizes:
It's best if you dont get swap, i find it slow,but if you want swap you can repartition it later,so use this:
fat 32: 512 mb (place where apps are stored, should be plenty of room)
swap: 0 mb
then the rest of the memory is saved on to your ext 2 partition
After your done partitioning your sd card, you must upgrade to ext 4.
So, go to upgrade ext2 to ext 3, then once its done, go to upgrade ext3 to ext 4 and then there you are done! You have ext4 on your sd card!
*Dont forget to place all the files you backed up onto your computer back onto the sd card because you will need to flash superwipe next, and then your rom.
You can do this by plugging in your phone thru usb to your computer, then choose the option "usb-ms toggle" in recovery,and it will mount the sd card so you can place the files back onto your sd.
Thanks for the reply.
When I flash superwipe, does that actually activate it, or do I need to flash it and then go somewhere else to use it? Also, do I need to download SuperWipe.conf as well?
This is what I have now:
Flash radio + hboot
Backup SD card data
Partition SD card:
512MB FAT32
The rest as ext2->ext3->ext4 (no swap)
Boot into recovery
Place files back on SD card
Flash superwipe
Power down/restart
Flash froyo rom
Click to expand...
Click to collapse
Also, as for the radio, it says to enter these commands:
fastboot flash recovery recovery-RA-dream-v1.7.0-cyan.img
fastboot flash radio radio-2.22.27.08.img
fastboot flash hboot hboot-1.33.0013d.img
fastboot reboot-bootloader
Click to expand...
Click to collapse
So I guess I will just enter "flash radio update_2.22.28.25_S.zip" instead?
ellisbodds said:
Thanks for the reply.
When I flash superwipe, does that actually activate it, or do I need to flash it and then go somewhere else to use it? Also, do I need to download SuperWipe.conf as well?
Click to expand...
Click to collapse
When you flash Superwipe, it unzips the file, and does what it tells it to, which is wipe everything. So you dont need to go anywhere to activate it, when you flash it, you are activating it.
No, you dont need the Superwipe.conf. Thats only if you want to change the things Superwipe will wipe.
ellisbodds said:
This is what I have now:Flash radio + hboot
Backup SD card data
Partition SD card:
512MB FAT32
The rest as ext2->ext3->ext4 (no swap)
Boot into recovery
Place files back on SD card
Flash superwipe
Power down/restart
Flash froyo rom
Click to expand...
Click to collapse
You are partioning your sd card through recovery, so you wont need to reboot your phone after your partitioning your sd card just go ahead and place your backedup sd card files back onto ur sdcard.
NOTE:When you are done flashing superwipe, it will tell you to power off ur phone before proceding.So, power off your phone, and then manually power back on to recovery by pressing home + power button at the same time, hold them until phone boots on. Then you are back into recovery and you can flash the Rom.
ellisbodds said:
Also, as for the radio, it says to enter these commands:fastboot flash recovery recovery-RA-dream-v1.7.0-cyan.img
fastboot flash radio radio-2.22.27.08.img
fastboot flash hboot hboot-1.33.0013d.img
fastboot reboot-bootloader
So I guess I will just enter "flash radio update_2.22.28.25_S.zip" instead?
Click to expand...
Click to collapse
Yes, you are correct.
Awesome, wish me luck then!
ellisbodds said:
Awesome, wish me luck then!
Click to expand...
Click to collapse
Good Luck! Let me know how it goes. Have fun with your new rom!
OK, so I got as far as flashing the recovery image again, which worked fine, and then I tried to flash the new radio, which didn't work fine.
I try typing:
fastboot flash radio update_2.22.28.25_S.zip
Click to expand...
Click to collapse
but all I get is:
sending 'radio' (9440 KB)... OKAY
writing 'radio'... FAILED (remote: image update error)
Click to expand...
Click to collapse
And now I don't know what to do
ellisbodds said:
OK, so I got as far as flashing the recovery image again, which worked fine, and then I tried to flash the new radio, which didn't work fine.
I try typing:
but all I get is:
And now I don't know what to do
Click to expand...
Click to collapse
hmm i think its displaying that mesage because its looking to update from the 2708 radio.
My only guess is to try flashing the 2708 radio instead of the 2825 radio.
maximo360 said:
hmm i think its displaying that mesage because its looking to update from the 2708 radio.
My only guess is to try flashing the 2708 radio instead of the 2825 radio.
Click to expand...
Click to collapse
And that will work here in the UK and stuff?
If I'm honest, I don't actually know what the "radio" does, but I hear the word and immediately think of some little chip inside the phone which communicates with the mobile network.
EDIT: 2.22.27.08 flashed okay. Now to move on