Its killing me, I start Believes by not possible Htc Deam rooting - G1 Q&A, Help & Troubleshooting

Dear every Hero
I get htc dear since 2 months in UAE but its belong to Italy (HTC Dream TIM)
I try all the comments and researches to root it, but I can’t, bootloader " model id incorrect " even the telnet did not working same error as “ Error while connecting to localhost 170.0.0.1 connection refused” even my provider ip no things happening just hang or sating around 10 min & in the last “error while connect to server … “ but without “connection refused”, I install the terminal from market but (id command get) " uid=10029(app_29) gid=10029(app_29) groups=3003(inet),
I hope any professional developer can help me…
Htc Details:
Model number HTC_Dream
Firmware version 1.1
Baseband version 62.41s.20. 13u_2.22.16.19
Kernel version 2.6.25-deb9915c
Herbert2and18-2 #11
Build number 1.58.901.3 plat-1.0_gms-141395 CL#15959
Release-keys
I hope getting the answer as soon as possible.

Dude, youre not writing a formal letter to your boss here...
push and hold youre camera button while turning on your phone... supply the information on that screen..
btw..are you trying to telnet to your phone through USB? if so, you'll be trying for a long time and you CLEARLY dont know what you are doing so I would stop trying to root your phone before you end up with a brick...

noob u skipped the step where its says Press Enter telnedd Enter or something close to that...
And post int the right forum knucklehead!

FOLLOW THE STEPS CLOSELY!
# Download recovery.img or the new version by Amon recovery-RA-dream-v1.5.2.img and copy it to your SD card (see the previous instructions on how to copy from your computer to your Phone's SD card).
# Download the Hard SPL and copy the zip file to the SD card.
# All files must be on the root of your SD card.
# Restart your phone. Wait for your phone to start up fully and show the home screen.
# After your phone starts up, hit the enter key twice, type "telnetd" and press enter. (Yes, it will start up a contact search, don't worry. Just type it.)
# Download an Android "Telnet" application from the Market and connect to localhost.
# If you connect successfully, you will have a root prompt "#".
http://forum.xda-developers.com/showthread.php?t=442480&highlight=root

LOOK,,,,
I want to root my ****ing phone?
If you read the whole msg I told you i try the bootloader, & what is mean of telnet through USB.

rahmy83 said:
I want to root my ****ing phone?
If you read the whole msg I told you i try the bootloader, & what is mean of telnet through USB.
Click to expand...
Click to collapse
Wow and I thought I had an attitude problem!
You need help so I'd try being a little nicer around here or someone may just help you brick your phone for fun. Lessons learnt around here can be harsh ones.

well then go F urself learn how to read an post in the right forum

even that
I try all that steps but no theing is happening same error you know I read this steps more tan 25 time & all FAQ have the same steps but zero nothing.
but for your information I connecting to internet through APN 3G Connection.
help please...............................

allways those Italians
@rahmy83
Unfortunately I can´t post a link, becose I too new here!
I own also an Tim branded Dream,
You just have to change the recovery Image by the fastboot metod.
PM me so I will send you a link.
I hope you can read Italian
Regards

hay People what is going on....
I answering the boostnek9 comment, I'm not mean to herat the anyone Ok..

i cant understand that guy

@jocks
you can send the link to rafata(at)europcar-uae.com, but I can't read italian.

If you mean you don't want to hurt anyone, then here's a few basic tips:
avoid the angry emoticons (this one: )
words such as '****'.
These things make you seem angry and rude, and will not make people want to help you.

I send you PM

Sell me your phone
LMAO.. If you can't root it, please sell to me @ 50 USD.

ees mee a azamat
borat that is you ?
ees me azamat , i miss much you.
please send txt massage that work only on g1 rooted secret.
i know have many chickens here.

rahmy83 said:
I answering the boostnek9 comment, I'm not mean to herat the anyone Ok..
Click to expand...
Click to collapse
With all that attitude... you tell me you try to telnet to your phone... I asked you " are you trying to telnet through USB " because you can't ..USB doesnt have a com port but a SERIAL/DEBUG cable does. I'm telling you that if you are this confused then you shouldnt be trying this cause you can make your phone a paper weight.. You know to weigh down papers, no longer functional, garbage. Anyways, dont come here asking for help and use fowl language in the process cause people will laugh as you cry, I will at least .

Is it wrong I keep coming back in here hoping to see him with a brick?

what is wrong..
Any way people I'm so sorry, my be you get my wrong but its ok,
I Grateful your help.
Thanks.

shadowch31 said:
Is it wrong I keep coming back in here hoping to see him with a brick?
Click to expand...
Click to collapse
It's sick. its not wrong.
still it's sick
I had always believed that smart phones are for smart users. Well as dumb phones are for.. well...

Related

How to activate number after ESN Swap in a flashed phone

I've done an ESN Swap to a flashed HTC Vogue. The phone has Myn's Android Build in its internal memory. I called Sprint and they input the ESN in the system. Then they asked me to follow some steps including putting in my number the MSID, etc..., however my number has not registered as I can't get into the phone menu to edit the previous owner's number and MSID. I can even see his number listed in the "About Phone: Status" section.
My question is: How can I get around this? I've searched this and other forums and cannot find a solution. If there is a solution, can someone please help me? I'd appreciate some specific details as it's obviously frustrating not able to make calls or use the data since I haven't manually programmed it.
Thanks everyone for their help!
bbonline said:
I've done an ESN Swap to a flashed HTC Vogue. The phone has Myn's Android Build in its internal memory. I called Sprint and they input the ESN in the system. Then they asked me to follow some steps including putting in my number the MSID, etc..., however my number has not registered as I can't get into the phone menu to edit the previous owner's number and MSID. I can even see his number listed in the "About Phone: Status" section.
My question is: How can I get around this? I've searched this and other forums and cannot find a solution. If there is a solution, can someone please help me? I'd appreciate some specific details as it's obviously frustrating not able to make calls or use the data since I haven't manually programmed it.
Thanks everyone for their help!
Click to expand...
Click to collapse
You have to flash to winmo and provision the phone, then flash back.
Thank you for the quick reply, but is there a tutorial that I can find exactly how to do it? My Windows Vista computer won't access my phone's SD Card or internal storage. Thanks again.
Hold the power and camera buttons while restarting, this puts the phone in bootloader mode (four bars). Then plug in the USB cable and run the stock HTC rom.
bbonline said:
Thank you for the quick reply, but is there a tutorial that I can find exactly how to do it? My Windows Vista computer won't access my phone's SD Card or internal storage. Thanks again.
Click to expand...
Click to collapse
Ok...
edit removed, see below
try that. download the winmo rom of your choice, put the phone in bootloader (phone+camera+pinhole reset), THEN connect usb and run the ruu on your computer.
Thanks for your help. I'll try this after I get off work and let you know the outcome.
OK, I'm trying to do it right now, but how will this unlocker work if the phone is obviously in Android mode and doesn't have Windows installed? Windows Mobile Device Center does not recognize the phone? Please help.
bbonline said:
OK, I'm trying to do it right now, but how will this unlocker work if the phone is obviously in Android mode and doesn't have Windows installed? Windows Mobile Device Center does not recognize the phone? Please help.
Click to expand...
Click to collapse
Put it in bootloader BEFORE connecting it to the pc and see if it shows up in device manager. You probably don't need to do the unlocker part (since it's probably already done.) Just flash a winmo rom and provision the phone, make sure data, calls, etc, work, then flash back to android.
EDIT:
frak, I see why you're confused. see this post, not that other one:
http://forum.xda-developers.com/showpost.php?p=5057645&postcount=4
You're definitely a lifesaver! Everything works now! Thanks so much!

Question about my device!!

I don't know how strict people are about "searching" things before posting on the forums, but I rather get yelled at by some nerd on the internet, than to have my $350 device screwed over because I followed the wrong tutorial. Anyways here are my questions:
1) I bought this device from someone brand new, and it came out of the box configured to work with Windmobile, but I was able to get my FIDO SIM card to work by simply inputting it into the device. So does this mean that my device is already unlocked?
2) I still have the old 2.2 version on my phone, and I want the new version (2.3), but since I cannot update the OS from the device itself, I don't know what method I should follow from my computer, also I am afraid that I might lose my unlock (if it is) with the update.
Please link me to the proper tutorial, or give me some insight on my problem, Thank you.

[Q] Rooting HTC Desire C

Hi there,
I've been searching forums and web pages for days now to find a guide to rooting the HTC Desire C. There is no sub-forum for this phone and I've only been able to find about 4 small threads on this device so I'm posting here. I have some dev knowledge but, nothing to do with mobile devices so excuse my ignorance if you can.
I've tried superOneClick and z4root to no avail. Didn't think it would be this tricky to find a way to root the phone. If any one can point me in the right direction I'd be grateful or if they can, maybe you know a decent guide to explaining how root access is obtained so I can try it myself(if possible).
Thanks for any information.
On MoDaCo, there seems to be a method to root the Desire C. See http://www.modaco.com/topic/355158-r1-superboot-how-to-root-the-htc-desire-c/
Thanks a lot. That guide did the job.
---------- Post added at 08:35 PM ---------- Previous post was at 08:30 PM ----------
Im a completed noob!!! I've registered with HTC dev to get the unlock code for my desire c but cant get my cmd to understand what I'm trying to do! I'm using my laptop which runs windows 7. Each time I type the comand 'Android>...' & press enter I just get the message 'don't recognise Android as an internal or external drive' ... please please please help!! ... again I must stress I'm a very very noob who don't know much so any help is very welcome... ta
@rob# I have gone through this process, so I know it works! When you are in the command prompt window you must change directory to where you have saved the files so for example if you saved them in a directory 'c:\android' and your command prompt is 'c:\username\whatever' then your command should be 'cd \android' then the instructions should work.....
:fingers-crossed:Thanks bobmcann, brilliant advice & that bit worked fine... but then I did something else wrong!!! I completed all the unlock bit via the cmd screen, got my e-mail message from htc to tell me what to do next & then my power failed on my pc! I've since tried to redo everything the HTC dev page says but when I try to generate another unlock code everything just hangs & nothing happens for about 15 mins, then I get bored, disconnect everything & turn off my pc/phone... what am I doing wrong now!!?!! is there an easy way to fix this or have I screwed everything up? Please help me (again! - I will get better at this I promise) - thanks
@rob# you removed the device while trying to install a root or unlocking ur bootloader, tbh am supprized it isnt fully bricked, try reinstalling everything from the start
The rooting method works, but is there any unroot procedure?
After having the desire successfully connected and starting the bat-file I always get the following error message: "booting....failed <remote: not allowed>". What am I doing wrong?
Hi,
I have problems with Android 1.0 driver. It doesnt works so I cant root the phone. How can I solved this problem? Where I can find driver? Thanks for replys.
I used the guide posted on modaco and it worked fine for me. Posting some screenshots or a more detailed explanation of what you're typing and what you're seeing would allow people to help figure out why you're having issues.
majko11293 said:
Hi,
I have problems with Android 1.0 driver. It doesnt works so I cant root the phone. How can I solved this problem? Where I can find driver? Thanks for replys.
Click to expand...
Click to collapse
You have to follow the instructions very closely on the HTCdev website -- make sure you have all the software they ask for including:
Android SDK Tools
HTC Sync Manager
Java Runtime
All three of these are at the upper right corner of the first page of instructions. Once you've downloaded the HTC Sync Manager, an OS reboot should then fix it. When you connect your phone the driver should self-install.
Best Guide for Noobs
This is the best Guide for rooting the HTC Desire C :http://forum.xda-developers.com/showthread.php?t=1947613
Enjoy
thank you to help

Bricked over mistake, please help

i hope i didnt break any forum rules by posting it here to receive more audience attention
my original post is at:
http://forum.xda-developers.com/showthread.php?t=2765131
the content is:
i have a Japanese HTC One or HTL22. I tried to sim unlock it as shown in this URL.
Code:
adb push misc.img /
adb shell
# dd if=/misc.img of=/dev/block/mmcblk0p19
# reboot
Upon writing this codes in cmd, i made a mistake: instead of /mmcblk0p19 I input /mmcblk0p1.
There was a message saying
Code:
/dev/block/mmcblk0p1: write error: No space left on device
257+0 records in
257+0 records out
131072 bytes transferred in ...
So i think the misc.img is transferred into the device (though it said no space left). And now the device wont boot.
Please help. Thanks.
EDIT: The device is now unbootable, when plugged into USB is not recognized by computer and wont be charged.
JTAG...
You overwrote one of your secondary bootloader partitions. That partition is very small, which is why you ran out of space.
Can you get into the bootloader screen by hard resetting and holding vol-down? If so, you should be able to to fix it by reflashing your firmware.
If your phone is stuck in the black-screen-unresponsive state, you're pretty much done.
As you may understand now, manually writing to partitions the way you did is extremely risky. It should only be done by experienced devs/modders who understand what they're doing and can be very careful doing it. It's not for noobs who just want to unlock their phones.
SaHiLzZ said:
JTAG...
Click to expand...
Click to collapse
thanks. it seems to be an extreme way to try to unbrick.
iElvis said:
You overwrote one of your secondary bootloader partitions. That partition is very small, which is why you ran out of space.
Can you get into the bootloader screen by hard resetting and holding vol-down? If so, you should be able to to fix it by reflashing your firmware.
If your phone is stuck in the black-screen-unresponsive state, you're pretty much done.
As you may understand now, manually writing to partitions the way you did is extremely risky. It should only be done by experienced devs/modders who understand what they're doing and can be very careful doing it. It's not for noobs who just want to unlock their phones.
Click to expand...
Click to collapse
thanks, i think the phone is pretty much done then.
Why do you have this thread in about 4 different places.
Welcome to the world of paper weights. I think this thread should be made a sticky.
KIDS, DONT TRY THIS AT HOME.
Seanie280672 said:
Why do you have this thread in about 4 different places.
Welcome to the world of paper weights. I think this thread should be made a sticky.
KIDS, DONT TRY THIS AT HOME.
Click to expand...
Click to collapse
really sorry for that. actually 3. i wanted to make it phone-specific and android general but made a mistake by making both in HTC section, after that I made one in android general section.
i tried to delete but seems no such option. any idea?
No need to be sorry, sorry you lost your phone, there is an unbrick service thread at the bottom of this page, take a look and see if it can help.
Regarding the other threads , you will need to contact a site moderator to delete those.
I only said to make it a sticky as a lesson to all, I wasn't being funny.

[Q] ASUS memopad 7 (ME176CX-1E041A) OTG?

Hi,
I am looking for a tablet for HAM radio / Shortwave listeners purposes.
One thing I need is a working OTG interface for attaching USB devices
to that tablet.
I read different/contradictionary informations about whether OTG works
with this tablet I am not sure, whether the tablets, they were talking about
were exactly the one I am on the way to buy.
So:
Does OTG work on a ASUS memopad 7 (ME176CX-1E041A) w/ Android 4.4 ?
And:
I read that Lollipop will install UEFI and will lock me out then, since there is
no rooting method....true?
Thank you very much for any help in advance!
Best regards,
tuxic
tuxic001 said:
Hi,
I am looking for a tablet for HAM radio / Shortwave listeners purposes.
One thing I need is a working OTG interface for attaching USB devices
to that tablet.
I read different/contradictionary informations about whether OTG works
with this tablet I am not sure, whether the tablets, they were talking about
were exactly the one I am on the way to buy.
So:
Does OTG work on a ASUS memopad 7 (ME176CX-1E041A) w/ Android 4.4 ?
And:
I read that Lollipop will install UEFI and will lock me out then, since there is
no rooting method....true?
Thank you very much for any help in advance!
Best regards,
tuxic
Click to expand...
Click to collapse
The rooting method for lollipop is only less noob-friendly, but for future I recommend you updating to lollipop. For rooting whether kitkat or lollipop (the better but a bit harder way), take a look at this thread: http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096
And OTG works quite good, even thumb drives work natively without some root using workaround.
Mis012 said:
The rooting method for lollipop is only less noob-friendly, but for future I recommend you updating to lollipop. For rooting whether kitkat or lollipop (the better but a bit harder way), take a look at this thread: http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096
And OTG works quite good, even thumb drives work natively without some root using workaround.
Click to expand...
Click to collapse
Hi Mis012,
thanks a lot for help me to start with all the things.
I want absolutely sure to understand what I am reading in all that tutorials and postings. Are there any "meta"-tutorials, which explain for example all these acronyms and abbreviations like
adb,odin,cvm,twpr,fastboot and a lot more? I want to learn, but what if I even dont understand the abbreviations of the tutorials and howtos? Lost?
Next:
I took a look at the rooting tutorial you linked (THX!) and didnt find my device in the list of supported devices? Out of luck? Or outdated informations? If outdated, how can I be sure, that
it still works?
(This is NO critism in any way, but I dont want "Just another brick in the wall"...
In this forum (or was it androidsforums? dont remember) I read postings of quite a few people who have created paper weights by upgrading to vanilla lollipop...
What are the benefits in comparision to kitkat to take the risk of an update?
Will lollipop fix the battery drain problem in standby of this nice device?
Can I attach a USBtoEthernet device to the usb port an get a net connection instead of using Wifi?
By the way: My ASUS mempad 7 is on the way to me....
Sorry for the bunch of question ... I am driven by a mix of curiosity and anxity...
Best regards and thank you very much for helping a newbie to get the road to
gain knowledge to help others in turn...
tuxic
tuxic001 said:
Hi Mis012,
thanks a lot for help me to start with all the things.
I want absolutely sure to understand what I am reading in all that tutorials and postings. Are there any "meta"-tutorials, which explain for example all these acronyms and abbreviations like
adb,odin,cvm,twpr,fastboot and a lot more? I want to learn, but what if I even dont understand the abbreviations of the tutorials and howtos? Lost?
Click to expand...
Click to collapse
adb - android debug bridge, gives you shell access to your device from computer and more. Search for Minimal ADB installer.
odin - Samsung flashing tool, has nothing to do with our tablet.
cwm - clockworkmod. custom recovery.
twrp - teamWin project recovery. has more functions, but refuses to work with our device
fastboot - something like adb, you use it for flashing partitions if you have unlocked bootloader
tuxic001 said:
Next:
I took a look at the rooting tutorial you linked (THX!) and didnt find my device in the list of supported devices? Out of luck? Or outdated informations? If outdated, how can I be sure, that
it still works?
(This is NO critism in any way, but I dont want "Just another brick in the wall"...
Click to expand...
Click to collapse
It should be in the supported devices list. It's me176cx. I can say it works.
tuxic001 said:
In this forum (or was it androidsforums? dont remember) I read postings of quite a few people who have created paper weights by upgrading to vanilla lollipop...
Click to expand...
Click to collapse
If you soft brick your device like me, you can just return to kitkat, or better go to store and want a rapair. I returned my to the store two days ago, hope they will give me a chance for lollipop. The update should work without problems on a new device.
tuxic001 said:
What are the benefits in comparision to kitkat to take the risk of an update?
Click to expand...
Click to collapse
First of all, it is lollipop vs kitkat - you can read on internet about why lollipop is better.
The best part - UEFI. with UEFI, you can install any computer OS (Windows, linux) on this tablet.
tuxic001 said:
Will lollipop fix the battery drain problem in standby of this nice device?
Click to expand...
Click to collapse
Maybe. there was some tutorial on xda how to fix it.
tuxic001 said:
Can I attach a USBtoEthernet device to the usb port an get a net connection instead of using Wifi?
Click to expand...
Click to collapse
If the OS will support it. I don't know if android can support this.
tuxic001 said:
By the way: My ASUS mempad 7 is on the way to me....
Sorry for the bunch of question ... I am driven by a mix of curiosity and anxity...
Best regards and thank you very much for helping a newbie to get the road to
gain knowledge to help others in turn...
tuxic
Click to expand...
Click to collapse
No problem.
DO NOT DO ANYTHING SUSPICIOUS WITH THE DEVICE UNTIL YOU GET LOLLIPOP!
Otherwise, you may end up with lollipop update not working > warranty or kitkat forever
And here are some links you should read (It' not that much of text, it only looks like that
https://www.happyassassin.net/2014/01/25/uefi-boot-how-does-that-actually-work-then/ - the autor should thank me, I recommend this article to everone here.
http://forum.xda-developers.com/showthread.php?t=2317790 - minimal ADB and fastboot (you do not need it for Temp CWM recovery, it includes it.
http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096 - Temp CWM recovery
http://forum.xda-developers.com/memo-pad-7/general/asus-memo-7-me176cx-t2814046 - general thread about this tablet
http://doesn't-exist-yet.sorry/ - I will make a nice step by step guide on how to dual boot lollipop and other OS as soon as I will have my tablet back from service and I will have lollipop so I will have UEFI)
Mis012 said:
adb - android debug bridge, gives you shell access to your device from computer and more. Search for Minimal ADB installer.
odin - Samsung flashing tool, has nothing to do with our tablet.
cwm - clockworkmod. custom recovery.
twrp - teamWin project recovery. has more functions, but refuses to work with our device
fastboot - something like adb, you use it for flashing partitions if you have unlocked bootloader
It should be in the supported devices list. It's me176cx. I can say it works.
If you soft brick your device like me, you can just return to kitkat, or better go to store and want a rapair. I returned my to the store two days ago, hope they will give me a chance for lollipop. The update should work without problems on a new device.
First of all, it is lollipop vs kitkat - you can read on internet about why lollipop is better.
The best part - UEFI. with UEFI, you can install any computer OS (Windows, linux) on this tablet.
Maybe. there was some tutorial on xda how to fix it.
If the OS will support it. I don't know if android can support this.
No problem.
DO NOT DO ANYTHING SUSPICIOUS WITH THE DEVICE UNTIL YOU GET LOLLIPOP!
Otherwise, you may end up with lollipop update not working > warranty or kitkat forever
And here are some links you should read (It' not that much of text, it only looks like that
https://www.happyassassin.net/2014/01/25/uefi-boot-how-does-that-actually-work-then/ - the autor should thank me, I recommend this article to everone here.
http://forum.xda-developers.com/showthread.php?t=2317790 - minimal ADB and fastboot (you do not need it for Temp CWM recovery, it includes it.
http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096 - Temp CWM recovery
http://forum.xda-developers.com/memo-pad-7/general/asus-memo-7-me176cx-t2814046 - general thread about this tablet
http://doesn't-exist-yet.sorry/ - I will make a nice step by step guide on how to dual boot lollipop and other OS as soon as I will have my tablet back from service and I will have lollipop so I will have UEFI)
Click to expand...
Click to collapse
Hi Mis012,
OH WHOW! This drives my curiosity up and my anxity DOWN! A BIG THANK YOU for your patience with a newbie (I have some experience with Linux and embedded devices (Beaglebone Black, AriettaG25(both ARM) though).
AND: My ASUS ME176CX has arrieved!!! YEAH!
And...strictly following your advice I just started to do the least suspicious with it: CHARGING! hahahaha!
Question (as you might already have expected :
The first thing I want to do is to lollipop my board.
Unfortunately there are two things to consider: I have to setup WLAN for my PC (yes, I am of the "generation copper" / Gentoo LInux. This will be some effort
but no unbeatable problem.
Next is: I am living in a house with LOT OF RF noise. My shortwave receiver sounds like an lawn mower when switched on indoors (that the reason for buying a mobile
PC to go outside and still have all decoders, frequency lists and informations available).
So I do not trust any broadcasted data stream that much...especially when it comes to firmware updates (IIIIIEEEEEKKKKSS!).
Is there any way to update via good ole files from a sdcard/internal flash in a non hackish, plain and secure way?
Earphone:
There neither a users manual nor Tech Specs inside the box.
And if I will insert an earphone into the earphone jack I may burn the output drivers of the audio chip inside,
if this earphone has a too low impedance. Mine has 14 Ohms.
Question:
What is the output impedance of the audio port?
Does it support a mic on the earphone (four contacts)?
Thank you very much in advance again for helping an old child to walk in new shoes!
Hopefully I will get around the hurdles in the beginning and can start to give answers.
Best regards,
tuxic
tuxic001 said:
Hi Mis012,
OH WHOW! This drives my curiosity up and my anxity DOWN! A BIG THANK YOU for your patience with a newbie (I have some experience with Linux and embedded devices (Beaglebone Black, AriettaG25(both ARM) though).
AND: My ASUS ME176CX has arrieved!!! YEAH!
And...strictly following your advice I just started to do the least suspicious with it: CHARGING! hahahaha!
Question (as you might already have expected :
The first thing I want to do is to lollipop my board.
Unfortunately there are two things to consider: I have to setup WLAN for my PC (yes, I am of the "generation copper" / Gentoo LInux. This will be some effort
but no unbeatable problem.
Next is: I am living in a house with LOT OF RF noise. My shortwave receiver sounds like an lawn mower when switched on indoors (that the reason for buying a mobile
PC to go outside and still have all decoders, frequency lists and informations available).
So I do not trust any broadcasted data stream that much...especially when it comes to firmware updates (IIIIIEEEEEKKKKSS!).
Is there any way to update via good ole files from a sdcard/internal flash in a non hackish, plain and secure way?
Earphone:
There neither a users manual nor Tech Specs inside the box.
And if I will insert an earphone into the earphone jack I may burn the output drivers of the audio chip inside,
if this earphone has a too low impedance. Mine has 14 Ohms.
Question:
What is the output impedance of the audio port?
Does it support a mic on the earphone (four contacts)?
Thank you very much in advance again for helping an old child to walk in new shoes!
Hopefully I will get around the hurdles in the beginning and can start to give answers.
Best regards,
tuxic
Click to expand...
Click to collapse
Really don't know anything anout earphones, but I think tablets have some kind of protection, the worst what can happen is you will drain your battery faster, or the sound volume might be lower. Theoreticaly.
About the update: sorry that I didn't mention it, the best what you can do is to download the lollipop firmware from asus support site for this tablet, put it on your sdcard and start it up, then there will be a notification saying somethinhg like "do you wanna update?" You will say that you want and that's it. And you can press thanks if you find my posts helpful, I will feel more like a big boss if I will have more thanks, and it pleases my heart If you need to know anything else, just say You would help us all if you could find someone interested in making cyanogenmod (12.1 would be best) for our device. Just share this link where I write how the locked bootloader can be safely ignored by replacing it with another one: http://forum.xda-developers.com/memo-pad-7/help/me176cxk013-how-cyanogen-mod-t3154917
Mis012 said:
Really don't know anything anout earphones, but I think tablets have some kind of protection, the worst what can happen is you will drain your battery faster, or the sound volume might be lower. Theoreticaly.
About the update: sorry that I didn't mention it, the best what you can do is to download the lollipop firmware from asus support site for this tablet, put it on your sdcard and start it up, then there will be a notification saying somethinhg like "do you wanna update?" You will say that you want and that's it. And you can press thanks if you find my posts helpful, I will feel more like a big boss if I will have more thanks, and it pleases my heart If you need to know anything else, just say You would help us all if you could find someone interested in making cyanogenmod (12.1 would be best) for our device. Just share this link where I write how the locked bootloader can be safely ignored by replacing it with another one: http://forum.xda-developers.com/memo-pad-7/help/me176cxk013-how-cyanogen-mod-t3154917
Click to expand...
Click to collapse
THANKS PRESSED! GREAT! I didn't saw that and it is the first forum I visit, which has this feature!
And downloading an update and THAN flashing it, makes me feel a lot more comfortable...WLAN is only "somehow" here...
Here:
http://support.asus.com/Download.aspx?SLanguage=en&m=ASUS+MeMO+Pad+7+(ME176C)
I found 1 firmware item to download:
Version WW_V12.10.1.17 (OS upgradesto Android Lollipop 5.0.1)
Now I am a little confused:
"Download device software and Update SOP (From “Manual” Item)" -- what the [] is a "SOP" ? I cannot find any SOP-Manual (or whatever SOP)
"Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW." ("SKU"? "WW"? "CN"? "TW"? ???? IEEEEKKKS! All this acronyms!!!
"Userfriendly" is definetly something completly different!
I need support for the ASUS support, I think
...Since I found in my ME176CX a software revision number starting with WW and the firmware also start with WW, I think I am ok.
I still dont know, what SKU is and I didnt find any SOP.
Will it be ok to put UL-K013-WW-12.10.1.17_KK-user.zip (unpacked???) onto my SDcard (where? The root dictionary of the card?) ,
put the SDcard into my tablet, and switch the tablet on (when fully charged) and "follow the instructions" ?
Sorry if doubling questions, but I feel better when asking question a second time than buying a tablet a second time...dont like Pink Floyd
at this point of my life...
Best regards,
tuxic
tuxic001 said:
THANKS PRESSED! GREAT! I didn't saw that and it is the first forum I visit, which has this feature!
And downloading an update and THAN flashing it, makes me feel a lot more comfortable...WLAN is only "somehow" here...
Here:
http://support.asus.com/Download.aspx?SLanguage=en&m=ASUS+MeMO+Pad+7+(ME176C)
I found 1 firmware item to download:
Version WW_V12.10.1.17 (OS upgradesto Android Lollipop 5.0.1)
Now I am a little confused:
"Download device software and Update SOP (From “Manual” Item)" -- what the [] is a "SOP" ? I cannot find any SOP-Manual (or whatever SOP)
"Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW." ("SKU"? "WW"? "CN"? "TW"? ???? IEEEEKKKS! All this acronyms!!!
"Userfriendly" is definetly something completly different!
I need support for the ASUS support, I think
...Since I found in my ME176CX a software revision number starting with WW and the firmware also start with WW, I think I am ok.
I still dont know, what SKU is and I didnt find any SOP.
Will it be ok to put UL-K013-WW-12.10.1.17_KK-user.zip (unpacked???) onto my SDcard (where? The root dictionary of the card?) ,
put the SDcard into my tablet, and switch the tablet on (when fully charged) and "follow the instructions" ?
Sorry if doubling questions, but I feel better when asking question a second time than buying a tablet a second time...dont like Pink Floyd
at this point of my life...
Best regards,
tuxic
Click to expand...
Click to collapse
I think that the description is some weird user-unfriendly way to describe what I said. Just do what I wrote, there should be no problem. I will stay tuned, crossed fingers for you.
Mis012 said:
I think that the description is some weird user-unfriendly way to describe what I said. Just do what I wrote, there should be no problem. I will stay tuned, crossed fingers for you.
Click to expand...
Click to collapse
I did it and: I GOT LOLLIPOP! YEAH!
I find you guilty for being the source of this success!
Is there a way to check, whether the update is complete, valid in whole working?
Are there critical points to check (certain applications/functions)?
Best regards,
tuxic
tuxic001 said:
I did it and: I GOT LOLLIPOP! YEAH!
I find you guilty for being the source of this success!
Is there a way to check, whether the update is complete, valid in whole working?
Are there critical points to check (certain applications/functions)?
Best regards,
tuxic
Click to expand...
Click to collapse
When you connect keyboard using OTG cable, and press F2 during startup, you should boot into UEFI. Did you encounter any problems with lollipop? Disabling "power saver" option in settings should give you smoother experiance, and solves problem with games playing slow. Anyways, I'm glad I could help. For further info, follow this thread: http://forum.xda-developers.com/memo-pad-7/general/asus-memo-7-me176cx-t2814046/page256
Mis012 said:
When you connect keyboard using OTG cable, and press F2 during startup, you should boot into UEFI. Did you encounter any problems with lollipop? Disabling "power saver" option in settings should give you smoother experiance, and solves problem with games playing slow. Anyways, I'm glad I could help. For further info, follow this thread: http://forum.xda-developers.com/memo-pad-7/general/asus-memo-7-me176cx-t2814046/page256
Click to expand...
Click to collapse
Hmmm....F2 does not work for me...
I also tried the easter egg...but I got a lollipop, but no game...
Furthermore I cannot connect the ME176CX to my computer in a way that the computer recognized it as storage device...
"Software version" say "5.0" and not "5.0.1" or anything higher. The firmware I downloaded was marked as "5.0.1"
Did I really got a FULL and VALID update?
Best regards,
tuxic
tuxic001 said:
Hmmm....F2 does not work for me...
I also tried the easter egg...but I got a lollipop, but no game...
Furthermore I cannot connect the ME176CX to my computer in a way that the computer recognized it as storage device...
"Software version" say "5.0" and not "5.0.1" or anything higher. The firmware I downloaded was marked as "5.0.1"
Did I really got a FULL and VALID update?
Best regards,
tuxic
Click to expand...
Click to collapse
It is 5.0.0 they have mistypen. As for the minigame, touching lollipop will change color, but holding will bring the minigame. Maybe F2 only works with powered hub, didn't try it as my tablet is still in service. Alternatively, you can try this:
1.connect usb keyboard with OTG cable
2.enter stock recovery (while powering on the tablet, hold volume down. In droidboot, select recovery using volume buttons and confirm with power button)
3.on the keyboard press and hold F2
4.select reboot to bootloader
5.on the keyboard press ENTER
steps may vary a bit, this method sounds weird to me but you can try. If it will not work, I will point you at a bit harder method.
Mis012 said:
It is 5.0.0 they have mistypen. As for the minigame, touching lollipop will change color, but holding will bring the minigame. Maybe F2 only works with powered hub, didn't try it as my tablet is still in service. Alternatively, you can try this:
1.connect usb keyboard with OTG cable
2.enter stock recovery (while powering on the tablet, hold volume down. In droidboot, select recovery using volume buttons and confirm with power button)
3.on the keyboard press and hold F2
4.select reboot to bootloader
5.on the keyboard press ENTER
steps may vary a bit, this method sounds weird to me but you can try. If it will not work, I will point you at a bit harder method.
Click to expand...
Click to collapse
Hi Mis012,
Ok, got the Lollipop game (just a test, what works -- just to validate my update).
Entered droidboot as a "exercise" only (for getting used to it).
Found my serial number is 012345678012345678 (or similiar counting up).
Does that mean, that someone sold me a refurbished device as a new one? I read of this
kind of "serial number" appearing on devices, which were sent for repair...
Currently I am download&installing (Gentoo installs a wrapper, which one calls to get the whole
thing installed) android_sdk/android_studio to my Linux PC. Oh damn! THAT'S a huge
thing to download...I started 4 hours before and it still downloads (no, I /am/ generation copper,
but I use DSL ... no modem
While that process slowly but surely will fill up my Linux harddisk I was searching for a
GPS app, which DOES NOT LOG me for others, dont read my contacts, and do other, non
purpose related things AND uses openstreetmap (or better: dont use google services),
is able to do all its functions offline and is GPLed.
I testinstalled three...
All claims suspicious rights of accessing for example the microphone.
I deleted all.
Damn!
I think I have to learn A LOT MORE, before feeling halfway comfortable with this kind
of "new world order"
And as always Mis012...thank you very much for your support and patience!
Best regards,
tuxic
PS: Next I will try F2 again...
tuxic001 said:
Hi Mis012,
Ok, got the Lollipop game (just a test, what works -- just to validate my update).
Entered droidboot as a "exercise" only (for getting used to it).
Found my serial number is 012345678012345678 (or similiar counting up).
Does that mean, that someone sold me a refurbished device as a new one? I read of this
kind of "serial number" appearing on devices, which were sent for repair...
Currently I am download&installing (Gentoo installs a wrapper, which one calls to get the whole
thing installed) android_sdk/android_studio to my Linux PC. Oh damn! THAT'S a huge
thing to download...I started 4 hours before and it still downloads (no, I /am/ generation copper,
but I use DSL ... no modem
While that process slowly but surely will fill up my Linux harddisk I was searching for a
GPS app, which DOES NOT LOG me for others, dont read my contacts, and do other, non
purpose related things AND uses openstreetmap (or better: dont use google services),
is able to do all its functions offline and is GPLed.
I testinstalled three...
All claims suspicious rights of accessing for example the microphone.
I deleted all.
Damn!
I think I have to learn A LOT MORE, before feeling halfway comfortable with this kind
of "new world order"
And as always Mis012...thank you very much for your support and patience!
Best regards,
tuxic
PS: Next I will try F2 again...
Click to expand...
Click to collapse
I hope you do not install sdk only because of adb, because you can get adb separetely and it has less the 10 MB.
About GPS, it looks like this tablet cannot fix location without being cannected to wi-fi.
About the serial number, it really seems weird, but you should be able to change it to something else if you want to.
And it looks there is a new OTA, I recommend not to install it, maybe it will remove UEFI acess or something. Now, it looks like a fix for lollipop problems some people had, but a lot of them have no problems after freezing the power saver app.
Mis012 said:
I hope you do not install sdk only because of adb, because you can get adb separetely and it has less the 10 MB.
About GPS, it looks like this tablet cannot fix location without being cannected to wi-fi.
About the serial number, it really seems weird, but you should be able to change it to something else if you want to.
And it looks there is a new OTA, I recommend not to install it, maybe it will remove UEFI acess or something. Now, it looks like a fix for lollipop problems some people had, but a lot of them have no problems after freezing the power saver app.
Click to expand...
Click to collapse
Hi Mis012,
No, no..(.the SDK is still downloading)...
I install the SDK cause I am curious and may (if TIME and BRAIN allows me) be I can
program something. I am on LINUX here (I mean: my PC is a GENTOO box), so often
tutorials are not that straight forward to read (and helper applications on PC side are
not running here).
GPS is only running when WIFI is connected? Holy CRAP...Google wants to be sure,
that tey are able to track """anonymously"""".
Software "problem"/"feature" which was installed with Lollipop or is it a hardware
restriction? Oh damn...one reason for buying this tablet has gone...
Next update will remove/close UEFI? Will be this the next feature, which I will loose?
But still the nice shiny glass surface will remain...(not without sarcasm... )
IF UEFI will be locked/removed...will we have a chance, to get full control over
this tablet again?
Who is checking for the sanity of this new update?
The droidboot/F2 hack does not work with my keyboard (KBtalking PURE 60).
I could reconnect my IBM model M keyboard of my PC to the tablet, but this
beauty will pull over 100mA through the USBtoPS2 converter....
Better not.
I have an USB hub here...will try that next.
Is there anything I definetly should NOT do, when booted into UEFI?
Will OTAs be available as files later or here or somewhere else?
Do you know of people having such a odd serial number AND have
a proofen new device?
Oh, why oh why one needs to check for everything these days???
Best reagards,
tuxic
tuxic001 said:
GPS is only running when WIFI is connected? Holy CRAP...Google wants to be sure,
that tey are able to track """anonymously"""".
Software "problem"/"feature" which was installed with Lollipop or is it a hardware
restriction? Oh damn...one reason for buying this tablet has gone...
Click to expand...
Click to collapse
It's working fine for me without WiFi, tested it last week. I've heard some people reporting problems with the GPS, can't reproduce them personally.
tuxic001 said:
Next update will remove/close UEFI? Will be this the next feature, which I will loose?
But still the nice shiny glass surface will remain...(not without sarcasm... )
IF UEFI will be locked/removed...will we have a chance, to get full control over
this tablet again?
Who is checking for the sanity of this new update?
Click to expand...
Click to collapse
I installed the update yesterday, it updated something in the BIOS or UEFI or however that it called, not completely sure if they patched that. I don't have an OTG adapter (?, the micro USB to USB adapter) yet (ordered one already) so can't say if they broke that. Will test once it has arrived.
tuxic001 said:
Will OTAs be available as files later or here or somewhere else?
Click to expand...
Click to collapse
You can download the latest OTA update from the link I posted it http://forum.xda-developers.com/showpost.php?p=61926393&postcount=2587 (scroll down a bit, the URL starting with fota.asus.com has the OTA update, can't post the link directly here for some reason) and install it using the temp CWM recovery for example. Not sure if you can also simply copy it to your sdcard, never tried that. Just keep in mind, I don't know what ASUS will do with your UEFI/bootloader with this update, it's generally working fine for me though. If you've disabled power saver in the previous lollipop version there is generally no big reason to update, there were only a few minor changes (I noticed nothing)...
tuxic001 said:
Do you know of people having such a odd serial number AND have
a proofen new device?
Click to expand...
Click to collapse
Just checked, I have the same serial number listed there. I don't know but I don't think it's the real serial number so I wouldn't worry about it. I've installed a few updates already and own the device for about a month already so can't tell for sure, but I'm pretty sure I wondered about this serial number already when I got the device a month ago.
tuxic001 said:
Hi Mis012,
No, no..(.the SDK is still downloading)...
I install the SDK cause I am curious and may (if TIME and BRAIN allows me) be I can
program something. I am on LINUX here (I mean: my PC is a GENTOO box), so often
tutorials are not that straight forward to read (and helper applications on PC side are
not running here).
GPS is only running when WIFI is connected? Holy CRAP...Google wants to be sure,
that tey are able to track """anonymously"""".
Software "problem"/"feature" which was installed with Lollipop or is it a hardware
restriction? Oh damn...one reason for buying this tablet has gone...
Next update will remove/close UEFI? Will be this the next feature, which I will loose?
But still the nice shiny glass surface will remain...(not without sarcasm... )
IF UEFI will be locked/removed...will we have a chance, to get full control over
this tablet again?
Who is checking for the sanity of this new update?
The droidboot/F2 hack does not work with my keyboard (KBtalking PURE 60).
I could reconnect my IBM model M keyboard of my PC to the tablet, but this
beauty will pull over 100mA through the USBtoPS2 converter....
Better not.
I have an USB hub here...will try that next.
Is there anything I definetly should NOT do, when booted into UEFI?
Will OTAs be available as files later or here or somewhere else?
Do you know of people having such a odd serial number AND have
a proofen new device?
Oh, why oh why one needs to check for everything these days???
Best reagards,
tuxic
Click to expand...
Click to collapse
About the UEFI acces removal I said maybe. Mayba not. But who knows these days?
And about the gps, it dit it on kitkat and someone said it does this on lollipop too. I would recommend booting in windows and trying then, if it will not work then it will never. But GPS apps for windows? Noooo, who would mess up with that? The next step would be Android-x86.
As for the UEFI, here comes the noob-unfriendly variant:
0. root the tablet (may not be needed, I haven't tried)
1. download the efibootmgr compiled for android http://forum.xda-developers.com/showpost.php?p=61108700&postcount=2083
2. place the file from inside the zip somewhere
3. using android termianl app, cd in folder with efibootmgr
4. with help of this file http://linux.dell.com/files/efibootmgr/efibootmgr-0.5.4/efibootmgr.txt set next boot to UEFI setup utility. You will most likely need root.
5. Power off the tablet and power it on again
6. You should be in UEFI setup utility. Now you may be able to browse the menus.
7. You will most likely still need a powered usb hub to connect keyboard and do anything.
I hope I will not need a powered usb hub, I do not have one.
Mis012 said:
About the UEFI acces removal I said maybe. Mayba not. But who knows these days?
And about the gps, it dit it on kitkat and someone said it does this on lollipop too. I would recommend booting in windows and trying then, if it will not work then it will never. But GPS apps for windows? Noooo, who would mess up with that? The next step would be Android-x86.
As for the UEFI, here comes the noob-unfriendly variant:
0. root the tablet (may not be needed, I haven't tried)
1. download the efibootmgr compiled for android http://forum.xda-developers.com/showpost.php?p=61108700&postcount=2083
2. place the file from inside the zip somewhere
3. using android termianl app, cd in folder with efibootmgr
4. with help of this file http://linux.dell.com/files/efibootmgr/efibootmgr-0.5.4/efibootmgr.txt set next boot to UEFI setup utility. You will most likely need root.
5. Power off the tablet and power it on again
6. You should be in UEFI setup utility. Now you may be able to browse the menus.
7. You will most likely still need a powered usb hub to connect keyboard and do anything.
I hope I will not need a powered usb hub, I do not have one.
Click to expand...
Click to collapse
Hi Mis012,
UEFI:
Thanks for the deeply-hack-mode-variant!
But I will wait with my experiments until it is clear whether we will still have full access to our beloved ME176CX or not.
Here is a little bit of knowledge, which I can give back:
I had asked on xda-developers whether and how it is possible to mount the tablet as storage device.
Now I found a way to do so on Linux.
You need to install on Linux (this is Gentoo notation...other distros may
have similiar nameings)
dev-lang/go-1.4.2
dev-libs/go-usb-9999
dev-libs/go-fuse-0_p20150422
media-libs/libmtp-1.1.8
On the tablet switch off PTP and switch on MTP.
Connect the device with you Gentoo box and start (as root)
go-mtpfs <mountpunt>
(YES! No device name is required here).
After that the mountpoint contains two directories:
drwxr-xr-x 0 root root 0 1970-01-01 01:00 Internal storage
drwxr-xr-x 0 root root 0 1970-01-01 01:00 SD card
which which is, is obvious.
It is ok, that the command "hangs" ... works as designed.
It stops hanging after the umnount (see below).
Now you can add files into these directories as root.
To umount use (again as root)
umount <mntpoint>
This way there is no need of WiFi transfers or fiddling with this
tiny memory chips.
Best regards,
tuxic
tuxic001 said:
Hi Mis012,
UEFI:
Thanks for the deeply-hack-mode-variant!
But I will wait with my experiments until it is clear whether we will still have full access to our beloved ME176CX or not.
Here is a little bit of knowledge, which I can give back:
I had asked on xda-developers whether and how it is possible to mount the tablet as storage device.
Now I found a way to do so on Linux.
You need to install on Linux (this is Gentoo notation...other distros may
have similiar nameings)
dev-lang/go-1.4.2
dev-libs/go-usb-9999
dev-libs/go-fuse-0_p20150422
media-libs/libmtp-1.1.8
On the tablet switch off PTP and switch on MTP.
Connect the device with you Gentoo box and start (as root)
go-mtpfs <mountpunt>
(YES! No device name is required here).
After that the mountpoint contains two directories:
drwxr-xr-x 0 root root 0 1970-01-01 01:00 Internal storage
drwxr-xr-x 0 root root 0 1970-01-01 01:00 SD card
which which is, is obvious.
It is ok, that the command "hangs" ... works as designed.
It stops hanging after the umnount (see below).
Now you can add files into these directories as root.
To umount use (again as root)
umount <mntpoint>
This way there is no need of WiFi transfers or fiddling with this
tiny memory chips.
Best regards,
tuxic
Click to expand...
Click to collapse
On my Arch Linux system with Gnome/Cinnamon and on Linux Mint/Ubuntu (with a few hacks) it is mounting the device automatically without root or any command, I simply connect it to USB and the device is showing up in the file explorer.
cyandro said:
On my Arch Linux system with Gnome/Cinnamon and on Linux Mint/Ubuntu (with a few hacks) it is mounting the device automatically without root or any command, I simply connect it to USB and the device is showing up in the file explorer.
Click to expand...
Click to collapse
Yes, there are distros out there, which has setup the udev-rules and mtp-mimic already.
Gentoo leaves all that as a task (and exercise) for the user.
Unfortunately I received no reply to my question how to access the ME176CX via usb storage.
So I found it myself...
Now I know, how it works
By the way: Is there any way to disable this [CENSORED] auto completion and word guessing "feature"
of the build-in keyboard. I disabled all suspicous settings under "Language and Input" -- but it
does not help.
"cat /proc/cpuinfo" will instantly be corrected to "cat /proc/Clinton"
which does not work in this case
For programming and system peeking purposes this is a total NO GO!
Help me please with the settings...I am over 30 !
Best regards,
tuxic

Categories

Resources