Finally, Brodit has created the car holder for B7610. Go to their website.
Unfortunately, seems that is not possible to open the keyboard when the phone is on the holder :-(
Related
Who know a good carholder for the Touch Diamond?
A holder who doesn't squeeze the volume buttons
Never mind i orderd the HR Richter Gripper 3 (mini phone)
The best holder I use is Hanes!
The best holders are usually from Brodit or Arkon. AFAIK neither have yet released a holder for the Diamond or its many varients.
What makes a good holder?
Audi A2
The cup holder is just in the right place.
you can use any thing just be creative
Our good freinds at DSL Developments will shortly have in stock the 'Brodit PDA Active Holder Tilt Swivel for HTC HD2'.
This is described as:
The active holder charges your battery when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform. Can be used with HTC original portable Handsfree. Item No :512086
We were lucky enough to be provided with one of the first brackets available in the country and as you can see from the attached it suits the HD2 well.
As anticipated with Brodit the holder itself has the standard 'Brodit' mount adaptor which means if you already have a Brodit mount fitted to your car you can just unscrew the universal mount portion of the holder and screw in your new HD2 holder in seconds.
Click to expand...
Click to collapse
[READ MORE]
Tekguru said:
[READ MORE]
Click to expand...
Click to collapse
I am using the same brodit holder that I first bought for my ipaq 6515, just retrofit it alittle by adding a felt material on both side of the holder, and viola!
Mine just arrived and it fits great. Very high quality.
Pictures please
Brodit's own pictures are always so bad !
Can you buy or look at these in any stores in the UK. I'd like to see them before ordering one over the net?
could you turn the device to landscape position? which device have you bought? I've found pages but could't get much more infos
http://www.ecron.de (under 'SUCHE' type HTC HD2)
hello 1pudding1 brodit in u.k
Hello 1pudding1. Go here in the U.K http://www.dsldevelopments.com/brodit/holder/HTC+HD2-Brodit-Holder.asp I purchased my Brodit holder and pro clip for my Touch HD from them it’s a cracking holder you will not be disappointed
Jez
I also bought the passive holder from the same place as jez.stix.
It's a tight fit, e.g. you have to hold the cradle with one hand while pushing the phone up with the other when removing it from the cradle. But that's a good thing as you know the phone won't slide out when in landscape mode.
The car mounts are designed to slide in between gaps in the dash, usually around the vents. The mount is secure enough but if you tried to pull the phone out with one hand you'll end up pulling the mount out of the dash.
Mujja said:
I also bought the passive holder from the same place as jez.stix.
It's a tight fit, e.g. you have to hold the cradle with one hand while pushing the phone up with the other when removing it from the cradle. But that's a good thing as you know the phone won't slide out when in landscape mode.
The car mounts are designed to slide in between gaps in the dash, usually around the vents. The mount is secure enough but if you tried to pull the phone out with one hand you'll end up pulling the mount out of the dash.
Click to expand...
Click to collapse
i have the active holder with the proclip. Solid and unable to pull the mount off the dash lol. Perfect fit and good build quality.
How does the dash mount of the Dell car kit work? Is it possible to abuse the car kit as a desktop stand?
nebukadneza said:
How does the dash mount of the Dell car kit work? Is it possible to abuse the car kit as a desktop stand?
Click to expand...
Click to collapse
Why would you want to just buy a dock they cost the same
I don't need a car dock very often, but at some point I am going to need one. The HDMI dock is just way too expensive, considering I don't need the video out. But I also don't want my streak just lying around on the table when charging. So I thought I could use the car dock as desktop stand until a third party comes out with a USB only dock for a reasonable price.
Btw, where I live, the car kit is about $20 cheaper than the dock and only about $20 more expensive than the USB cable.
I don't see why not, as long as your desk has a smooth surface as the actual phone holder uses a suction cup at the end of it. If when in car you attach the kit to the windowscreen and your desk isn't smooth, you can just stick the suction disc to your desk so the holder can suck onto that (usually stuck to your dash so you can stick the holder on the dash rather than the windscreen).
I used to use an in-car holder as my desktop stand on my glass table at home, but now I use it at work but with a suction disc as the table is wood and slighly bumpy as I now have the docking station at home.
Hello,
I am looking for a car charger, which uses the charging port of the docking station at the Sony Xperia Z.
The reason why I'm looking for something like this, is that I want to build a separate holder.
The holder from Brodit I find too ugly and too expensive.
V4Mp82 said:
Hello,
I am looking for a car charger, which uses the charging port of the docking station at the Sony Xperia Z.
The reason why I'm looking for something like this, is that I want to build a separate holder.
The holder from Brodit I find too ugly and too expensive.
Click to expand...
Click to collapse
If you don'tlike to active car holder from Brodit, why don't you use the docking station and build the holder yourself. I doubt it will look better than Brodit's.