hi guys I got weird problem- my micro SD card is, or should I rather say was, 4GB. after some ROM installing I observed that its not a 4gb anymore, but 2gb. and its not about collecting trash, its just maximal capacity. Can some1 tell me what to do?
1. I dont have memory card reader in PC so dont ask me do to that okay?
2. should I do sth before installing new rom? of course HardSPL is done. But between installing 2 different roms? I used to copy the installation file Kovsimg.nbh on card and did standard prodecure- switch off the phone etc but I guess its a mistake isnt it?
thanks in advance
bump bump bump
cor848 said:
hi guys I got weird problem- my micro SD card is, or should I rather say was, 4GB. after some ROM installing I observed that its not a 4gb anymore, but 2gb. and its not about collecting trash, its just maximal capacity. Can some1 tell me what to do?
1. I dont have memory card reader in PC so dont ask me do to that okay?
2. should I do sth before installing new rom? of course HardSPL is done. But between installing 2 different roms? I used to copy the installation file Kovsimg.nbh on card and did standard prodecure- switch off the phone etc but I guess its a mistake isnt it?
thanks in advance
Click to expand...
Click to collapse
keep the card in your phone and connect to pc with usb cable in card reader mode.
Format card.
If still dont work you got a fake/pirate micro sd
How did you format it ?
On the official SD Association web site http://www.sdcard.org/consumers/formatter/ there is the following statement:
"SD or SDHC memory card file systems formatted with generic operating system formatting software do not comply with official SD memory card requirements and optimum performance may not be experienced."
The site also provide an SD card formatter program, fully compliant with SD Association specifications, but, unfortunately for you, it runs only on PC, so you need a card reader.
I had the same problem some time ago, with a 2GB full size SD formatted with my iPaq and recognized as 1GB, this tool fixed it.
If you connect your device to PC as a card reader, as stated above, it should work.
Go to Settings / Connections / USB to PC and choose Disk Drive. At least, my Xperia, and many HTC have this control panel.
cor848 said:
hi guys I got weird problem- my micro SD card is, or should I rather say was, 4GB. after some ROM installing I observed that its not a 4gb anymore, but 2gb. and its not about collecting trash, its just maximal capacity. Can some1 tell me what to do?
1. I dont have memory card reader in PC so dont ask me do to that okay?
2. should I do sth before installing new rom? of course HardSPL is done. But between installing 2 different roms? I used to copy the installation file Kovsimg.nbh on card and did standard prodecure- switch off the phone etc but I guess its a mistake isnt it?
thanks in advance
Click to expand...
Click to collapse
chinese fake
you are a chinese fake, formatted with device that one of u recommended me and working
thx
Related
I recently sold my Sandisk 2gb micro and bought a Sandisk 4gb micro. From time to time my stuff on the card get deleted. Since I bought it (3-4 days ago) I have had to reload everyone 4-5x. Has anyone experience this problem?
I'm using the rom that came with the Tilt when it first came out.
Are you using the card outside of the phone on any PC?
If you are, you may need to update the drivers on your PC.
Any SD card above 1Gb requires a new formatting technique as the filing system is different.
Writing to a card on a PC with old SD card drivers can cause file allocation corruption and sometimes you will even lose access to the card completely.
Check out your card maufacturers website or any others (Toshiba, Sandisk etc.) and download any OEM driver updates or new formatting utility they have for you PC.
Failing that, only tranfer data to the card via Activesync (I know its a pain!) after formatting the card on the phone.
Farsquidge said:
Are you using the card outside of the phone on any PC?
If you are, you may need to update the drivers on your PC.
Any SD card above 1Gb requires a new formatting technique as the filing system is different.
Writing to a card on a PC with old SD card drivers can cause file allocation corruption and sometimes you will even lose access to the card completely.
Check out your card maufacturers website or any others (Toshiba, Sandisk etc.) and download any OEM driver updates or new formatting utility they have for you PC.
Failing that, only tranfer data to the card via Activesync (I know its a pain!) after formatting the card on the phone.
Click to expand...
Click to collapse
I'm using a Sandisk Micro mate to connect to my computer. It came with the card
http://www.amazon.com/SanDisk-Ultra-MicroMate-Bundle-SDSDRH-4096-901/dp/B000J5LA9Q
ZzFDKzZ said:
I'm using a Sandisk Micro mate to connect to my computer. It came with the card
http://www.amazon.com/SanDisk-Ultra-MicroMate-Bundle-SDSDRH-4096-901/dp/B000J5LA9Q
Click to expand...
Click to collapse
That does not mean a great deal! It is only providing a USB link to the SD. If you use the Windows file system to access that card without it having the latest SD file system updates loaded on your PC it will not work correctly.
Don't get me wrong, I don't want to sound fussy here but did you get a driver CD with the adapter? Most people don't bother updating the drivers if their computer recognises the device to start with.
Only trying to be helpful.
Farsquidge said:
That does not mean a great deal! It is only providing a USB link to the SD. If you use the Windows file system to access that card without it having the latest SD file system updates loaded on your PC it will not work correctly.
Don't get me wrong, I don't want to sound fussy here but did you get a driver CD with the adapter? Most people don't bother updating the drivers if their computer recognises the device to start with.
Only trying to be helpful.
Click to expand...
Click to collapse
Hi, no I did not received a driver cd for it. I'm gonna go search for a new driver online.
EDIT: Went to the Sandisk site and they do not have an driver update for this device. Sandisk Micromate SDDR-113
that happened when i installed my 6gb microsd(I transfered files from 2gb microsd to 6 gb). Things started to dissapear but not delete(available memory space didn't go up). You need to reformat the card, and redo everything for it to fix
ekw said:
that happened when i installed my 6gb microsd(I transfered files from 2gb microsd to 6 gb). Things started to dissapear but not delete(available memory space didn't go up). You need to reformat the card, and redo everything for it to fix
Click to expand...
Click to collapse
Yeah weird right. I realize my card was blank but it came out that 1.3gb were being use. I just reformat my card, hopefully this won't happen again.
Hallo,
i cooked many ROMs and every time i try to flash using SD Card (8GB), but without any sucess, it does not find any ROM to flash!
I renamed the cooked ROM to blacimg.nbh (also tried blackimg.nbh), copy to SD Card, Rebo0t into Bootloader mode (Power + Volume Down), it reboots and search for ROM then change to serial (usb)
I used search but no answer found
What am i doing wrong?
Thnax in Advance
WBR
Siemens Lover
SiemensLover said:
Hallo,
i cooked many ROMs and every time i try to flash using SD Card (8GB), but without any sucess, it does not find any ROM to flash!
I renamed the cooked ROM to blacimg.nbh (also tried blackimg.nbh), copy to SD Card, Rebo0t into Bootloader mode (Power + Volume Down), it reboots and search for ROM then change to serial (usb)
I used search but no answer found
What am i doing wrong?
Thnax in Advance
WBR
Siemens Lover
Click to expand...
Click to collapse
Which file did you rename to blacimg.nbh (that's correct and not blackimg.nbh)? Did you save it to the root of the sd card as suggested (although mine is in a folder and this also works)? Because the steps you are describing are correct and should work (work like that for me). The only thing I can think is that there is possibly something wrong with the file you are using. Is it one of your own cooked roms?
ClydeB1 said:
Which file did you rename to blacimg.nbh (that's correct and not blackimg.nbh)? Did you save it to the root of the sd card as suggested (although mine is in a folder and this also works)? Because the steps you are describing are correct and should work (work like that for me). The only thing I can think is that there is possibly something wrong with the file you are using. Is it one of your own cooked roms?
Click to expand...
Click to collapse
Thanx for ur reply
Yes, i cook my own clean ROMs, the ruu_signned.nbh is renamed to blacimg.nbh and is directly copyed to the root of my SD Card
I do not know what is wrong!
WBR
Siemens Lover
faced the same prob long time ago with a old 4 Gb card...no matter what i've did was not able to flash. However I sugest to reformat your sd card (FAT 32 and not on your pc/laptop, do it with your phone) and then try again after formating, altough it may not help. to be sure that you are not doing wrong try another SD card if possible.
Another option to check your self is flashing with ActiveSync after formating.
Good Luck
p.s. It seems this is happening often if you used your SD card in another device
I'd a similar problem while flashing on my old P3300
To avoid the problem, I'm using a 1gb micro sd dedicate only to rom flashing but with a single partition of 256MB.
dunno if this could help u
cheers
I was having exactly same problem today when I tried to flash - mine's 8gb mini SD which came as a part of package from Orange, U.K.. I ended up using normal USB cable but I was wondering why it didn't work...
zephyr said:
I was having exactly same problem today when I tried to flash - mine's 8gb mini SD which came as a part of package from Orange, U.K.. I ended up using normal USB cable but I was wondering why it didn't work...
Click to expand...
Click to collapse
Fashing with some big SD >4gb could generate some issue. Use one small dedicated to that and format it first in Fat32.
Hi Carl, thanks for your advice - it actually worked like a charm. I didn't really thing 8gb would cause this problem. I used just a plain 2gb ScanDisk card, formatted in Fat 32 and put only blacimg.nbh following normal procedures - thank you very much again!
My 2 cents
I had a similar problem not long ago with my 8Gb Micro SD that came with the card. I'd re-formatted it via the PC and altered the default settings based on a thread I read on here which was supposed to speed up access to the card. If I remember correctly it was changing the default allocation size.
Long story short, reformatted back to default settings and I was able to flash again from SD. IMO it's moreso the format of the card, not so much it's size as I never had a problem with flashing from card before tweaking it's format settings.
SD Card
I always flash from my SD card.
My latest card is a 16Gb class4 SanDisk, and I must have flashed more than 50 times from this. I always put my blacimg.nbh file in the root of the card.
Size of the card is not important, it just have to be formated in FAT32.
There are several reports that some brands of card do not work very well with Windows Mobile.
One time I purchased a Kingston card that simply would not work.
I have AT&T Tilt with Sakajati's HyperDragon IV Windows Mobile 6.1 OS ROM, I also have this 8 GB micro SD card, which has around 3.5 GB of data, but for some reason I am not able to write on it any more. When ever I tried to format it I get this message which says " The card is write protected" I don't remember putting any password or anything. I can read data from that card on any computer or phone, but can write anymore data on the card. I can't delete anything from the card either.
Can someone suggest what could be wrong with the card and how can I unlock it?
I have tried low level format also, the format completes without any error, but when see in file explorer all the files are still there. If I try to format from SD formatter, I get error "The memory card is write protected", windows format doesn't give any error, just runs and in the end says "Windows can't comeplte the format". Card is working file and have no problem in reading the data it has, just can't write new one ot delete old one.
This is very weird problem... any help/comment is good.
Not sure if this will help....
I've had very similar issues over time...
Because of high TomTom & Music Use.
Both are loaded and work off my SD Card (6 GB worth)
What I finally found that worked for me, was to get a 2nd card and backing up my SD card to my Desktop PC, so later I could transfer to the 2nd SD Card when needed.
Then I do a Complete Format [Full FAT32 Format] of the old SD Card, via the Mini SD adapter on my Desktop PC.
I found that formating within the phone doesn't always work...
If this is not the case I can think of 2 other reasons for potential problems..
~Some ROM's require the removal of SIM & SD Cards when installing?
~If you were using an adapter formating the SD Card and it was not set to write mode?
Best of Luck!
JAC,
Thanks for your reply, but I have already tried FAT32 formatting using micro sd card, but as I said before, but it errored out.I even tried low level format, but didn't work. There is no locking swithc or anythign in micro SD card, not sure how the data can be locked. If it was ecrypted I was not able to read data on other devices. So what happened? Any help!!!
Like everything else, sometimes things just wear out, break or are just low quality to begin with. If you can read it on other devices, then transfer it and get a new card.
There is also a trick used by nefarious suppliers that takes a 4GB (or any size chip) and format it in a way that it appears as a larger chip. Then when you go to write to it the whole thing goes crazy.
This is why I recommend using reputable resellers and buying good quality Name Brand Chips, Like Sandisk or Kingston.
Hi, basically I put my 512mb micro sd card in to my X1 and then check if it is working, but it says Not Installed.
I tryed another card and same problem. I have formatted to fat32 and still same problem. But when I put my phone in to Disk Transfer it says insert memory card etc. but on my Windows machine it shows me the memory card.
It seems like software to me, is there anyway of fixing this?
I have also installed the HARD SPL to install a new ROM but unable.
Anyhelp is great
Hello Friends,
i really need your help urgently, during my holiday i made about 200 Photos with my Optimus Speed 2x. I was using a Custom Rom and was missing the stock LG weather App. I download it from the internet and choise install to SD and after that my Phone didnt work normal. They told me maybe my sd card is broken and i buy a new sd card and i put the new sd to my phone and boot. My phone worked with the new SD.
I dont want to lost my 200 Photos.....and thats why i want to know from you guys how can i save my Photos?
I already try everything...i put my micro-sd in the adapter and put it in my SD Slot of my Laptop. Then i as the sand hour but windows cant open the sd card and explorer crash......
Can anybody please help me? How can i save my pics from that sd card?
Thanks alot
Best Regards
Coktail said:
Hello Friends,
i really need your help urgently, during my holiday i made about 200 Photos with my Optimus Speed 2x. I was using a Custom Rom and was missing the stock LG weather App. I download it from the internet and choise install to SD and after that my Phone didnt work normal. They told me maybe my sd card is broken and i buy a new sd card and i put the new sd to my phone and boot. My phone worked with the new SD.
I dont want to lost my 200 Photos.....and thats why i want to know from you guys how can i save my Photos?
I already try everything...i put my micro-sd in the adapter and put it in my SD Slot of my Laptop. Then i as the sand hour but windows cant open the sd card and explorer crash......
Can anybody please help me? How can i save my pics from that sd card?
Thanks alot
Best Regards
Click to expand...
Click to collapse
Hi Cocktail, I'm a Mac user, but I do have s0me experience with file recovery. Your SD Card will be formatted in the Fat 32 File format. Try this utility on your laptop to scan your SD card. Free App
Or try any other file recovery program that you might have access to.
I hope this helps. Anil
aksolanki said:
Hi Cocktail, I'm a Mac user, but I do have s0me experience with file recovery. Your SD Card will be formatted in the Fat 32 File format. Try this utility on your laptop to scan your SD card. Free App
Or try any other file recovery program that you might have access to.
I hope this helps. Anil
Click to expand...
Click to collapse
Hello,
thanks for reply. But i cant read the sd card at the moment so how can i use
recovery software?
Regards
Coktail said:
Hello,
thanks for reply. But i cant read the sd card at the moment so how can i use
recovery software?
Regards
Click to expand...
Click to collapse
Hi Cocktail, if you reformat your SD card whilst in your phone. This will wipe the directory and any dodgy formatting but not any of your files. Then you can scan the SD card for files on your laptop. Recovery software can be told to search the entire logical structure of a volume, and ignore any formatting to find files. This normally takes a little or a long time, depending on the size of the volume.
I've done this on a 1 Terrabyte RAID 5 volume, that took a very long time (days), yours should be a lot quicker. But still that is what I would do.
DISCLAIMER: I am only suggesting a course of action. If your photos are life or death important, then find a company that will do file recovery for you for a price. Google will help you here.
If you follow my suggestion. Then having half decent Windows file recovery software would be very very helpful.
I hope this helps. Anil
When you put your SD card in your laptop do you not see it when you go to "My Computer"? On the SD card adapter it has a little lock on the side which you can flick up and down to lock it, maybe it's locked? (Happened to me before) Or try putting the SD card in a different phone and see what happens.