Hi,
I've got a very big problem:
Today I tried to install a new custom ROM to my ADP1.
I've tried a lot but finally got to the step where I wanted to update the bootloader. After running the update the device was starting again but was reset after 2 seconds.
Since that time I'm not able to start my device again. I can press the power button or other button combinations but no vibration or screen that is showing anything.
Guys, I know that it was dump to do that and my fault so please no comments on that.
Has anyone any idea what I can do to get my device started again and get into any menu?
meinereiner
first problem....wrong section
have you tried holding home+power or camera+power when turning on?
if either of these get you anywhere then it can be fixed
there is no reason why you shouldnt be able to if it was just a rom flash gone bad
if it works, SEARCH, if not, sell it or get a doner
Moved as not Android Development.
Sorry for taking the wrong section, thanks for moving ...
Unfortunately Ive already tried tried all these combinations. No chance to get it alive :-(
Related
i will try to be as detailed as possible. im coming from the kaiser community so go easy on me
when i had recieved the phone it would turn on go past the tmobile g1 screen and go into the recovery console. the console read. JF 1.41.
after reading around the best option i got was reverting everything back to factory settings.....and so i did. i installed the factory spl went back to rc29....then updated to rc 30 and installed the new cupcake.
everything was fine except for i couldnt get the phone activated given im an AT&T user.
this morning i finally recieved the unlock code from tmobile and when i turn the phone on with the att simcard, it gave me the triangle with the exclamation screen.
so i hit alt +l then alt w and after a reboot it would bring me back to the same screen. Also this recovery screen is diff from the jf 1.41 (im guessing this is the factory console).
now im out of ideas as to how to get this phone back in order. i would love flashing the DREAIMG.NBH but sadly my phone refuses to go in bootloader.
ive been trying to hold camera+ power and its jsut loads up the tmobile g1 screen.
any and all advice/helps are appreciated.
-thank you
so this is totally weird. i leave the phone unplugged with the battery out for about 3 hours. came back to work on it....turned it on and well it loaded and got me to the home screen ( no sim card ).
so i powered off the phone and inserted the AT&T simcard turn it on and it shows me the same screen again with the triangle and exclamation point.
how do u explain that ?!
pressed power for 3 seconds and then let go and held down the back key. it flashed the bootloader tricolor screen and then said ""everything will be reset to factory defaults .press send to reset"" and when i did that there was no change........nothing happened. ended up pulling the battery out..
Same problem..
I have very similar problem.. but mine takes much more than 3 hrs to come back.. and even then , the task manger keeps popping up from time to time in the home screen ,, so i guessed my home button was stuck or something...
After i found your "problem Sovled" post in another theread on 11th oct ..i thought i better take your suggestion before taking phone apart..
I was on 1.5 version and 2.22.19.26I radio. also i do not know whether i'm in RC29,30,33 ..
i'm really confused about all this radio,firmware ,recovery things....
Please Guide me ..
well first you need to get in your ph to find out if u have rc29. if you are able to get to home screen just hit menu - setting - about phone - all the way down it'll tell you what you are running.
i followed this guide to help me flash it to the cyanogenmod rom
http://forum.xda-developers.com/showthread.php?t=563679
hopefully it helps. but if you are able to get into bootloader unlike me then jsut flash the rc29 hopefully it will solve your problem.
my home key acted like it was stuck but now everything is working fine.
Thanks for Replying so quickly ..
I managed to go to the bootloader screen(tricolor) ..actually it went without even pressing the camera button(any idea why??) after leaving the phone without battery for about 5 hours.. and i flashed the Dreaimg-RC29 file .
Since then i'm Stuck in recovery mode again.. but this time the recovery utility is different (yellow letters)..i.e hopefully RC29 is succefully installed.
I wanted to complete doing your suggested guide before asking any more questions, but now i unable to so what shud i do now?
IS the task manger popping up involuntarily sometimes for you in the cM builds?
Can it be that you had a hardware button issue, which somehow rectified itself when going to Cyanogen..
I really appreciate your taking time to answer my questions ..
well sounds like jsut what had happened to me.
make sure you have tmobile simcard on you with a dataplan.
you're going to have to leave your phone off without the battery or just turned off for a while. from here on out it was trial and error. i kept trying to turn the phone on hoping it would go past the recovery screen once it did i activated the phone and finally completed the root process.
as for the cyanogen mod rom i think you are right. though on my initial flash i had a bunch of force closing apps but it all fixed itself upon a restart. ever since then i haven't seen the recovery mode every time i boot it.
PS: that reocvery mode that you see is the stock recovery meaning yes u have flashed RC29 sucessfully.
so i jsut flashed to CM 4.2.3.1. and well im back to square one. im booting into the recovery by default. obviously confirming my doubts about the hardware problem.
im going to try and leave the phone off for a while and see if i can get it to load up. usually that solves my problem.
Oh..
Thats depressing.. Anyways... Lets do it together then I have kept my phone unsed for about 16hrs now.. hope it works ..
Have you tried the HTC Diagonistic program for g1 (DREADIAG.nbh) ?.. I am yet to try it out as i cannot go to the bootloader..
http://www.megaupload.com/?d=7NRX7H40
which version of cyanogen were you using before this happened?
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
mtkhalid said:
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
Click to expand...
Click to collapse
Did you update from 4.1.9999 straight into 4.2.3.1? If so, that's the problem (maybe).. I suggest you install the HTC 1.6 ADP Rom (link in the cyanogen 4.2.3.1 post) then upgrade to 4.2.3.1. Make sure everything is updated.... rom, recovery & spl (before you upgrade SPL make sure you have the most recent radio version first! or you'll brick the phone). then give it a try and see what happens...
you are right. the first time i just flashed the new rom. the second time around i followed the guide except for i flashed the latest cyanogen rom.
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Still waiting for your answer
SaiSantoshD said:
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Click to expand...
Click to collapse
how did you flash the RC29? after pressing the power button
did it give you any errors? once its flashed, reboot by pressing home and back (or w/e the SPL tells you to)
it should boot into the rom
Home button problem (repaired/solved)
Firstly, thanks for responding ..
I had flashed RC29 when it had gone to the tricolor bootloader screen on its own
but after that it would not go anywhere other than recovery(exclamantion mark)
Now good news
4 hours back i opened the phone again(third time) , and took a safety pin and started scraping(gently) the non shiny parts of the connector ( daughter board to main board) .
I think it was previously shorted near that area , so by scraping removed the shorted metal joints .. and now the phone booted up to RC29 (just like that) and i even installed the cyanogen mod ..
Many thanks to u all .. hope this Comes UP in google search for people with similar problems(and there are many)...
KEYwords: Home button stuck on recovery no booting
Ah wow didnt think of that lol.. glad to see you got it to work
okay im getting completely frantic right now, i tried to flash the newest cognition ROM from stock 2.1 rooted from recover and it all loaded fine but i kept getting force closes com.android.phone or something and then i was like okay ill just restore my last backup and did that but now it wont boot past the at&t world phone screen and i cant get into recovery. ive read other threads about this but theyre all different situations so i wanted help for my specific situation. i love all the devs help and hard work on this site and i hope my phone is not bricked because ive only had it for about 2 weeks. so please a fast response would be appreciated, i would like to have my phone fixed by tonight thanks in advance guys oh and also i am able to get into download mode i just dont know what that does.
no one knows?
nevermind everyone i got it using odin
Just reflash use this http://forum.xda-developers.com/showthread.php?t=818439 or you can search for odin one click by DG.
Odin. You will be fine. Just search and read. Be careful what you do and try your best to understand what you are doing before you panic.
You were getting fc on cog so instead of reading and re -flashing you panicked then flashed a 2. 1 back up over 2. 2 with voodoo lagfix active. :O it is not the end of the world. I do hope you have a PC and not a MAC. Odin will flash you back to stock but you will need to search and read. Good luck
Captivate
Cog 2.2
I think I'm in a similar boat... tried to flash back to JH7 after getting tired of froyo versions that I didn't like. Now I'm stuck at the AT&T screen and nothing works... no matter what button I hold while I power the phone on, I get nothing. Any advice?
Update: I think I may have something here... found a guide talking about JTAG stuff that suggested holding both volume buttons while plugging in the USB cable... seems to have gotten me to the "downloading..." screen. That's a plus.
Alrighty. The other night, I had download mode. I updated to a new Kernal.
Today I try to access it, and I have:
POWER RESET or UNKNOWN UPLOAD MODE.
Now, I've googled, and none of the threads really answer the question. What do I have to do to get into download mode to flash a new kernal?
thenashy said:
Alrighty. The other night, I had download mode. I updated to a new Kernal.
Today I try to access it, and I have:
POWER RESET or UNKNOWN UPLOAD MODE.
Now, I've googled, and none of the threads really answer the question. What do I have to do to get into download mode to flash a new kernal?
Click to expand...
Click to collapse
1. did you try pressing power button and volume down combination?
Oh... I'm such a fkn noob.
Thanks mate.
thenashy said:
Oh... I'm such a fkn noob.
Thanks mate.
Click to expand...
Click to collapse
It's all right. Nobody starts from 100 anyway. it's always 0. working up..
Hello guys, I am completely new to this forum, first post actually. I recently rooted my new Samsung Galaxy S2 and installed the latest Cyanogenmod7 for AT&T SGH-i777. Everything went fairly smooth and was not too difficult after hours of research. As I navigated the system I found some glitches and decided to go back to stock ROM. Being a noob, I think I installed the wrong Kernel while trying to revert. At this point, I am unable to do much more than get into clockwork mod recovery boot screen with power, up/down volume. While in the screen which is orange rather than blue before, up and down will navigate the options but tapping an option does nothing but reset back to the list. I can not reboot, power off or anything for that matter. I have been trying for hours to get into download mode and all I get is the Samsung Galaxy S2 and then a black screen like nothing has happened. For whatever reason the Samsung Boot screen says i9100 when my phon is SGH-i777 for AT&T. Not sure if what I am dealing with is a bricked phone or if I need some experiential knowledge within this forum to work magic. Any help with resolving this issue is greatly appreciated. Thanks in advance for any time given, Incloud!
Hope this is appropriate for this section.
Hey everybody,
A few weeks ago my Captivate lock button stopped working. I am under the impression that it is a software glitch, but I haven't had time to play with it until now. I finally got the phone to show up on my computer (it was stuck booting into ClockworkMOD, but the select button didn't work. So I basically had a useless phone). I used Odin and flashed to 2.3.3 with Master Clear thinking it would fix the glitch and everything would work like normal again, but I was wrong. The lock button still doesn't work, and now I don't have my phone rooted. I want to flash back to stock Eclair, maybe that will fix this glitch, but I can't get into download mode. No button combo, no adb...nothing.
I'm here, because I want to know if anybody else has this problem, or if there is a fix that I can't find searching all over the Internet. Or if anybody knows how to root the Captivate without going into download mode.
Thanks in advance
this is the development section. Do not post questions here.
NO ONE WILL ANSWER YOU!
TRusselo said:
this is the development section. Do not post questions here.
NO ONE WILL ANSWER YOU!
Click to expand...
Click to collapse
Sorry, I will move it.
daleaf said:
Hey everybody,
A few weeks ago my Captivate lock button stopped working. I am under the impression that it is a software glitch, but I haven't had time to play with it until now. I finally got the phone to show up on my computer (it was stuck booting into ClockworkMOD, but the select button didn't work. So I basically had a useless phone). I used Odin and flashed to 2.3.3 with Master Clear thinking it would fix the glitch and everything would work like normal again, but I was wrong. The lock button still doesn't work, and now I don't have my phone rooted. I want to flash back to stock Eclair, maybe that will fix this glitch, but I can't get into download mode. No button combo, no adb...nothing.
I'm here, because I want to know if anybody else has this problem, or if there is a fix that I can't find searching all over the Internet. Or if anybody knows how to root the Captivate without going into download mode.
Thanks in advance
Click to expand...
Click to collapse
the home button also functions as a select button in CWM
How were you able to get into download mode with the power button not working? Just curious, because I am having the same problem. Building a JIG now
Hi all,
Wondering if anyone could help me. On the Samsung ATIV Odyssey I have, when it boots, it will show, Windows Phone, Samsung screen then just shows the spinning gears..this will go on forever. I tried to reset and "tried" to hard reset it but could never get the "!" To show up.
Is there any way possible to recover this phone or am I stuck having to send it out to Samsung?
I have not been able to get anywhere with this phone and can't find recovery software like Nokia has for their phones for Samsung models....
Thanks in advance!!
Can anyone help with this issue ?
I ended up calling Samsung, the phone is out of warranty (of course) but, they say they will do a free one time flash to attempt to recover the phone. The provided free shipping and will flash it and return the phone to me at no charge.
Nice, didn't know they offered that....
DavidinCT said:
I ended up calling Samsung, the phone is out of warranty (of course) but, they say they will do a free one time flash to attempt to recover the phone. The provided free shipping and will flash it and return the phone to me at no charge.
Nice, didn't know they offered that....
Click to expand...
Click to collapse
If 'someplace in CT' means 'quacche patte a Catania vicinu a fera o luni' we live in a similar place
Anyway you can get informed better here:
http://forum.xda-developers.com/showthread.php?t=2692049
Take a Flash tool. more infos here(the procedure should be the same for the odissey)
http://forum.xda-developers.com/showthread.php?t=2391138
You can try to flash the fake wolfROM with the customwolfROM.csc(or mbn, I don't remember) for Odissey (You'll find it in the first thread i've linked you)
OF COURSE FOLLOW THE GUIDE NOT TO BRICK MORE YOU DEVICE.
If you have any problems you can ask.
Thanks, does the Odyssey (SCH-I930) can be flashed with the roms for the ATIV S ? Interesting, If I can get this phone up and running again, I might try to go the ROOT route if I can. That is if it can be recovered.
2 computers would not even detect this phone because of it being a reboot loop. So even if I had a rom or something else for it, the computer would not even see it.
Not my primary phone, so no big rush if I have to wait for a week...
DavidinCT said:
Thanks, does the Odyssey (SCH-I930) can be flashed with the roms for the ATIV S ? Interesting, If I can get this phone up and running again, I might try to go the ROOT route if I can. That is if it can be recovered.
2 computers would not even detect this phone because of it being a reboot loop. So even if I had a rom or something else for it, the computer would not even see it.
Not my primary phone, so no big rush if I have to wait for a week...
Click to expand...
Click to collapse
NO IT CAN'T OF COURSE BE FLASHED WITH OTHER PHONES' ROMS BUT IF YOU KEEP READING ALL THE PAGES OF THE THREADS I'VE LINKED YOU YOU'LL LEARN THAT WOLF MADE OTHER CUSTOM CSCs(the smallest,editable part of a WP rom) SPECIFIC FOR YOUR DEVICE AND HOW TO FLASH 'EM
(I wrote with caps lock in order to let you get the importance of the point )
It's normal that every pc doesn't see your phone:something in its os is missing.I would advice you to flash another csc -description in this the customwolf rom thread I've already link to you -(see the specific combination of your model in order to know if your phone turns on in download modus and you can try to flash again it)
EDIT----
Sorry man,I just Thought now to it: You could simplify your life just trying first a Hard reset from buttons combination (I think this is the correct one,but you can search for yourself for the specific combination of buttons of your phone).
Alternate Method
Step 1
Turn off the phone and wait 15 seconds.
Step 2
Press the "Power" button. Press and hold the Volume Down button until an exclamation mark appears on the screen.
Step 3
Press the Volume Up button and then press the Volume Down button. Press the Power button and then press the Volume Down button again. The screen goes black and then the reset process completes.
In this way you should be able to HR your device without turning it on and risking to damage it more with flashing
gidannifico said:
NO IT CAN'T OF COURSE BE FLASHED WITH OTHER PHONES' ROMS BUT IF YOU KEEP READING ALL THE PAGES OF THE THREADS I'VE LINKED YOU YOU'LL LEARN THAT WOLF MADE OTHER CUSTOM CSCs(the smallest,editable part of a WP rom) SPECIFIC FOR YOUR DEVICE AND HOW TO FLASH 'EM
(I wrote with caps lock in order to let you get the importance of the point )
It's normal that every pc doesn't see your phone:something in its os is missing.I would advice you to flash another csc -description in this the customwolf rom thread I've already link to you -(see the specific combination of your model in order to know if your phone turns on in download modus and you can try to flash again it)
EDIT----
Sorry man,I just Thought now to it: You could simplify your life just trying first a Hard reset from buttons combination (I think this is the correct one,but you can search for yourself for the specific combination of buttons of your phone).
Alternate Method
Step 1
Turn off the phone and wait 15 seconds.
Step 2
Press the "Power" button. Press and hold the Volume Down button until an exclamation mark appears on the screen.
Step 3
Press the Volume Up button and then press the Volume Down button. Press the Power button and then press the Volume Down button again. The screen goes black and then the reset process completes.
In this way you should be able to HR your device without turning it on and risking to damage it more with flashing
Click to expand...
Click to collapse
Thanks again for your help here !!!!!!!!!!!!!!! The hard reset is not working. I tried this MANY time before posting (after about a day playing with it, at the point of giving up hope). I can try the key commands but, at no point will I EVER see the exclamation mark. No kidding, I must of tried this 40 different ways, with different timing, I can 100% confirm that something is screwy with this phone.
If I do the Power plus volume down (to try to get the exclamation mark), as soon as a let go of the power button and holding the vol down, the phone will go in a reboot loop.
The phone does not get to a point where the PC will detect it, it will start to boot up and it will show on the display Windows Phone, then Samsung logo, then it will just show the spinning gears(like it had a failed update). It does this for ever (I let it go 24 hours before pulling it). I can do the soft reset but, that is it...
It's packed up ready to go but, I'll hold it for a day, do you think I could actually recover this phone with a rom ?
DavidinCT said:
Thanks again for your help here !!!!!!!!!!!!!!! The hard reset is not working. I tried this MANY time before posting (after about a day playing with it, at the point of giving up hope). I can try the key commands but, at no point will I EVER see the exclamation mark. No kidding, I must of tried this 40 different ways, with different timing, I can 100% confirm that something is screwy with this phone.
If I do the Power plus volume down (to try to get the exclamation mark), as soon as a let go of the power button and holding the vol down, the phone will go in a reboot loop.
The phone does not get to a point where the PC will detect it, it will start to boot up and it will show on the display Windows Phone, then Samsung logo, then it will just show the spinning gears(like it had a failed update). It does this for ever (I let it go 24 hours before pulling it). I can do the soft reset but, that is it...
It's packed up ready to go but, I'll hold it for a day, do you think I could actually recover this phone with a rom ?
Click to expand...
Click to collapse
I really don't know because I don't have the phone in front of me,so I can't 'think' to anything.
I just know that People flashed the custom csc..who knows,that could be Your solution-but could be not-.
I recommend you to read very well and many times the procedure.
Good luck and let me know.
gidannifico said:
I really don't know because I don't have the phone in front of me,so I can't 'think' to anything.
I just know that People flashed the custom csc..who knows,that could be Your solution-but could be not-.
I recommend you to read very well and many times the procedure.
Good luck and let me know.
Click to expand...
Click to collapse
Yea, I tried everything I could find in google and Bing...No luck, I'll send it back to Samsung to see if they can recover the phone....
Thanks again for your help. When I get it back, if it's running, then I will try to interop it....
DavidinCT said:
Yea, I tried everything I could find in google and Bing...No luck, I'll send it back to Samsung to see if they can recover the phone....
Thanks again for your help. When I get it back, if it's running, then I will try to interop it....
Click to expand...
Click to collapse
You're welcome
When the phone will be perfectly working you 'll be able to interop it with wolf's custom csc (the thread I've linked to you)
Cheers
BTW, I have the custom rom for the Odyssey, its definitely got some odd bugs.
Verizon stores can reflash it for you too for free, just need to hit up a Verizon CORPORATE store. Apparently they have the tools and the ROM, instead of waiting for it to be mailed and come back.
Well I used the wolf custom rom and follow the exactly instructions but my phone now say is corrupted, and instead of boat show me a message telling me that!
So, I got another one and now has the same problem, so, somebady knows if there is at day an original rom available?
Still no public Odyssey ROM yet.