Hello all,
I have been following the guide posted by Nephron http://forum.xda-developers.com/showthread.php?t=532719 but am having a few problems with my computer recognising my G1 as an ADB device...
My computer's OS is Vista. I have followed the guide to the letter, have downloaded the SDK and unzipped it to C:\ root. I have checked my phone and ensured that 'USB Debugging' is checked. My computer doesn't try to install the Android 1.0 driver (as the original drivers are already installed) and my device is ready to use as a storage device - HOWEVER it is not acknowledging it is an ADB device.
I have tried using USBDeview but it won't let me uninstall the 3 already installed Android drivers. I have even tried manually uninstalling them through the taskbar USB device manager. Even when I uninstall them and re-connect my phone, it automatically installs the standard drivers and doesn't give me an option to select the SDK drivers.
Hope that makes sense to someone. How can I install these damn SDK/ADB drivers on my G1?! Thanks.
Try this...
Remove every mass storage device except your phone (Any usb memory sticks, external HDD's, other phones, etc)
Open the start menu, right click on 'Computer', click 'Manage', and you may need to click continue here.
On the next page, click on 'Device Manager' on the left hand side. In the list on the right, open up the tree for 'Universal Serial Bus Controllers'
Find 'USB Mass Storage device' in the list. Right click it, click 'Uninstall'
Click 'Action' at the top, then 'Scan for hardware changes'.
If it all goes well, you should now be asked to locate a driver, point the the Android USB driver. Good luck.
PS, this is all from memory of the issues I had, so if you get stuck, post back .
Worked a charm, thanks!
(Mods...can this be merged to the NEWBIE Q&A thread for ADB/Fastboot etc...more useful place for it than here!)
Glad I could help .
OK...
New problem...
I am using command prompt on vista, entered the following:
cd C:\android-sdk-windows-1.5_r2\tools
adb devices (shows my device listed as HT845KV02724)
adb shell (shows a # on the following line)
However....when I enter adb it returns with /sbin/sh: adb: not found .....what have I done wrong? I have checked that the SDK is in C:\ and have downloaded the SDK again just to be sure. What do I need to change???
Once you type adb shell, you're in a terminal on your phone, you can type shell commands there, you need to type exit before typing adb again.
Basically, it's working as intended .
I Followed all the instructions to the T on how to install adb.
When I get to the point where I plug in my phone,....and DONT MOUNT...
it shows up on my computer like its gonna install the adb but then asks me to locate the driver.
I am very confused on what to do from here. Can someone help me please?
I'm assuming you're on a Windows machine. As such, you need to install the windows drivers.
http://stuff.foamcoffee.com/misc/adb/win/android_usb_windows.zip
Those are XP only.
oK i AM ASSUMING I GOT THE DRIVERS INSTALLED, BUT WHEN I TYPE ADB DEVICES INTO MY COMMPAND PROMT. IT SHOWS THIS...
Code:
C:\Documents and Settings\HP_Administrator>cd C:\android-sdk-windows\tools
C:\android-sdk-windows\tools>adb devices
List of devices attached
C:\android-sdk-windows\tools>
There is no deviec being read?
Now what.
spazoid said:
oK i AM ASSUMING I GOT THE DRIVERS INSTALLED, BUT WHEN I TYPE ADB DEVICES INTO MY COMMPAND PROMT. IT SHOWS THIS...
Code:
C:\Documents and Settings\HP_Administrator>cd C:\android-sdk-windows\tools
C:\android-sdk-windows\tools>adb devices
List of devices attached
C:\android-sdk-windows\tools>
There is no deviec being read?
Now what.
Click to expand...
Click to collapse
because you don't have your drivers installed
Um...yes I do...I made sure three times.. I may be a noob at this, but im def not a noob when it comes to a pc
HAHA if you don't have the HTC driver installed it will not read the device. Uninstall the default usb driver in device manager under adb interface, then make sure windows doesn't reintall it and use the one in the file posted above.
I can only assume it is the correct driver that he linked. What OS do you have running x86 or x64?
Hey guys im new here and new to android too. my android sdk doesnt seem to work anymore. when i typed adb shell, it will show daemon starts successfully. it worked flawlessly previously. however when i tried using adb command like adb devices all these, it will shows "adb not found" what does this mean? i open the command prompt at the tools folder and have tried to reinstall my samsung I9000 driver but still it doesnt work. Is it cos of the path i set is wrong or wad? Im using window 7 and the folder name of tat android sdk is called "android" on my desktop. can anyone help me with this??? thanks. i need the adb to work in order to install some game and root. thanks in advance
Reinstall SDK
i tried reinstalling driver and sdk and the result is still the same. any other suggestion?
Not sure if it helps, but I had problems installing i9000 drivers until I installed Kies. Kies installed all the drivers perfectly.
you have to restart the adb daemon as root, eg:
sudo ./adb kill-server
sudo ./adb start-server
edit: just read that you are using windows ... so run the command without he "sudo" but under the admin-user ...
I have been trying to make this whole adb think work for about twenty hours strait and I still have not gotten very far. I own a mac and no pc and updated to froyo with my buddies pc. I have followed all the directions to a T over and over using terminal on the mac and I can get to the ADB commands and even to where I can see my phone by clicking devices but I must be missing something important. ANY HELP WOULD BE REALLY APPRECIATED I AM ABOUT TO PULL MY FREAKING HAIR OUT!!!
Ok, so if you can see your phone through adb, then you are definitely on the right track. Unfortunately, I'm not really familiar with OS X anymore so I'm not quite sure how to do it. Just sit tight for now until someone who does use a Mac, or has more of a clue then I do can help you out.
But seriously, don't pull your hair out. It won't stay on your head forever ya know...
Edit: oops, just saw this is JI6 (Froyo) not JF6, so I can't help you, but here is a general overview:
from terminal inside Android sdk main directory:
tools/adb devices -> list all devices connected that ADB can see
tools/adb shell -> gets a normal user shell on your phone
tools/adb reboot recovery -> reboots into recovery mode, suitable for update.zip root method
--------------------------------
Place the root update.zip on internal sdcard.
from terminal inside Android sdk directory:
tools/adb reboot recovery
Select the update software option, and you will be done.
laxwillsch said:
I have been trying to make this whole adb think work for about twenty hours strait and I still have not gotten very far. I own a mac and no pc and updated to froyo with my buddies pc. I have followed all the directions to a T over and over using terminal on the mac and I can get to the ADB commands and even to where I can see my phone by clicking devices but I must be missing something important. ANY HELP WOULD BE REALLY APPRECIATED I AM ABOUT TO PULL MY FREAKING HAIR OUT!!!
Click to expand...
Click to collapse
Start simple:
If you open a terminal on the mac, and go to your android SDK tools folder; what happens when you type ADB shell?
Or if you type any of the ADB push commands?
You need to give more detail around what you are seeing for us to help you.
Ok so if I am in terminal and i type in my /android-sdk-mac_x86/tools nothing happens and it just says /android-sdk-mac_x86/tools is a directory. But if I type the same but with /tools/abd it opens the abd command lines, like how to write code. Then when I try to "adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin"
it says "-bash: adb: command not found"
however when I type laxwillsch$ /android-sdk-mac_x86/tools/adb shell
it does give me the drop down $
but when I then try to write the next line of code "chmod 0755 rageagainstthecage-arm5.bin"
it says "chmod: rageagainstthecage-arm5.bin: No such file or directory"
I am stumped I am beginning to think i need to buy a pc as I am very interested in android development and want to learn more, but it seems all the tutorials are run assuming you are on a PC
EDIT** I have downloaded the android SDK started pack, and the 2.2 root pack and they are all in my /android-sdk-mac_x86/tools folder that is directly on my Macintosh HD for simplicity
Do you know how to change directories (cd command)?
The problem is that you are trying to work in one directory, but all your tools are in another.
So change directories to the tools directory:
cd /android-sdk-mac_x86/tools/
now run your adb commands - you may have to type ./adb to tell your mac to look in the current directory for the adb command (that is what ./ means "start here")
Also, try to understand what is happening so you can more easily troubleshoot: chmod is a command to change permissions, and you are running it on the phone. If you can't push the file to the phone, then you can change it's permisssions. I guess you never got rageagainstthecage on the phone, so there is no way to chmod it.
If you can't do this on a mac, a PC is not easier. I use both, and like both, but you need to learn basic commands first - they apply to the mac terminal and the windows cmd prompt.
Getting root means moving in and out of the phone - adb shell - puts you in a terminal on the phone. So you really need to understand cd (change directory); pwd (present working directory - shows you where you are); cp (copy); and know your current path - what the ./ does.
I hope this helps, not trying to sound condescending - maybe practice a linux terminal tutorial would help
Thanks so much, I am at school right now and cant test out all that but you are really helping me understand all this! I will post tonight and let you know how it goes. again thank you
ok so i dont have my usb cable with me but I was playing around with the commands that you suggested and ureka! i finally got to a point where it says "h70-33-65-19:tools laxwillsch$" thats a first! and when i type pwd it shows "/android-sdk-mac_x86/tools" so that means I am working out of the right directory right? and from here I enable usb debugging connect my phone then just copy and paste the codes from the thread correct?
yes, it sounds like you are on the right track. But take it nice and slow when you follow the steps. It is very important that the commands are entered exactly as you see them.
Also, one step tells you to wait for something to run and kick you out of ADB - wait just like it says - takes about 45 seconds but feels like forever.
If you are in the tools directory - just by typing "adb" no quotes will give you whole page of adb commands - if you get a "command not found", then you need to add the ./ and make it ./adb
Hope this helps and again, read the commands step by step a couple times first so you understand what is happening.
In a nutsell, you push the rage file;
change its permissions, run it;
get kicked out of ADB and then open a new ADB shell;
you are now root;
remount the system partition to give you write access when it reboots;
reboot;
push over some files;
change permissions on files you pushed;
reboot;
Some things to know - SU is a command for gaining root access; when you use SU your prompt changes (in adb shell) from $ to #
If you are succesful you should see the SuperUser app listed in your apps.
Done and Done just rooted successfully couldnt have done it without you! thanks so much
I've been a lurker for the last few years; never thinking I would need any help or assistance .. but I have a situation ..
My Sprint HTC One was working better than I had ever seen it just last Thursday. I was running CM11, with ART. I had an old version of SuperOne (Sense 5) backed up with TWRP. I thought I'd go ahead and load the backup, and update all the apps and then make another more recent backup before returning to CM11. I got as far holding the power button and selecting recovery. The phone locked up at that point.
It took 10 minutes to get it back to the screen where you can select fastboot, factory reset, etc. Interestingly I couldn't get into TWRP. The screen read "entering recovery" and nothing. It would just hang there.
I read that erasing the cache with fastboot might work, and it did. But when I was able to enter recovery, instead of restoring CM11, I thought, "well, maybe now it'll work", so I just rebooted. Wrong. Wouldn't boot. And, now running fastboot cache erase (or erase cache) doesn't do anything.
Now, by pressing the power button alone and holding it in I'm able to get to the fastboot, factory reset, etc screen. Went to fastboot usb, and fastboot commands work but ADB doesn't detect the device. I can't send ADB commands, but I can send ONE fastboot command. After sending any fastboot command, the phone locks up. Nothing from that point.
I tried installing a RUU. The .exe file detected the version on my phone, and everything went great until the program said it was booting to the bootloader. Locked it up. Nothing from that point.
I need help.
Thanks.
I uninstalled the HTC drivers and reinstalled them. A suggestion since ADB didn't work. And I can't get into bootloader. No difference.
Any suggestions
Any suggestions at all. I'm desperate.
Ogre77497 said:
Any suggestions at all. I'm desperate.
Click to expand...
Click to collapse
You can get into fastboot correct?
Fastboot - Yes .. Sorta
I can get into fastboot, but I copy anything to the phone via fastboot. I'm told "unable to write". Thanks.
Ogre77497 said:
I can get into fastboot, but I copy anything to the phone via fastboot. I'm told "unable to write". Thanks.
Click to expand...
Click to collapse
Ok it's probably a problem with your USB cable or USB port. Try using another PC and another cable.
If this doesn't work read some guide to properly set up ADB, uninstall all HTC stuff and install only the "naked driver" and than run the LATEST ruu. Maybe you have upgraded your firmware and can't flash older ruu's.
Sent from my HTCONE using Tapatalk
Will Try
I'll give that a try. I really appreciate the help. I run my whole business on that phone.
Just make sure you follow my suggestions properly. It should be just the cable, and I think you don't have the right drivers for ADB. Stay calm your phone is just soft bricked. You only need to be patient and read. Naked driver here http://forum.xda-developers.com/showthread.php?t=2263822
Sent from my HTCONE using Tapatalk
elvisypi said:
Ok it's probably a problem with your USB cable or USB port. Try using another PC and another cable.
If this doesn't work read some guide to properly set up ADB, uninstall all HTC stuff and install only the "naked driver" and than run the LATEST ruu. Maybe you have upgraded your firmware and can't flash older ruu's.
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
+1
I did the same thing a few weeks ago and lost recovery in the process. The naked driver did the trick. Also the thread about restoring after a gsm rom install is a great. It's not a loss. Not having an sd card in the one made things a little different for me, but I was able to get everything back. These drivers suck!
Progress
I've followed your directions. I downloaded the naked driver, and the minimal ADT. I found the correct RUU (3.04.651.2) I attempted to relock the bootloader, but I got a message .. " Status read failed <no such file or directory>" Went ahead and tried flashing the RUU (fastboot flash zip ruu.zip), and got the message "FAILED Remote: not allowed"
The phone is unlocked, CID SPCS_001, and HBOOT 1.44
I wasn't able to access TWRP recovery earlier, so I tried reflashing the img file. Failed remote: image update error. I tried erasing the cache .. "Failed remote erasing error", but now I can get into TWRP.
TWRP says I have "0" internal storage. I also can't mount system, data or cache. The choices are there but can't be selected.
I can't use ADB (device not found). and the phone isn't detected by windows. I had installed the HTC drivers, but couldn't uninstall them, so I install HTC Sync manager and then uninstalled it. The program deleted the HTC drivers when I uninstalled it. When I plugged in the HTC One (with a new cable) nothing happened, so I used the windows hardware wizard to install the naked driver. The phone still isn't detected, but again I can issue fastboot commands. Well, one fastboot command and then the phone freezes up.
If I use filemanager within TWRP there's no emulated sd card. I really think that's where my problem is. No partitions are available. And, when I use TWRP to shut down, it warns me that no OS is installed.
Any other suggestions?
I sure appreciate all your help. Thanks.
elvisypi said:
Just make sure you follow my suggestions properly. It should be just the cable, and I think you don't have the right drivers for ADB. Stay calm your phone is just soft bricked. You only need to be patient and read. Naked driver here http://forum.xda-developers.com/showthread.php?t=2263822
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
Are you Linux savvy at all? All this crap is far easier on Linux. I guarantee the drivers are absolute cakewalk -- there isn't a specific driver at all, just a rule to tell the kernel about the device.
I can give you the udev rule for the phone if you are sick of trying to get Windows to work. The Android SDK is also quite easy to install.
If you want to try, just install Ubuntu 12.04 LTS. Later versions also work, but that version is the current stable release. I can help from there.
Try another cable maybe it's faulty. Uninstall all the HTC crap, run some cleaner app like ccleaner (maybe there are leftovers) and install only the naked driver. Your phone should be detected. Make sure you have the latest version of ADB. here's the latest http://click.xda-developers.com/api...n 1.1.3 Here&jsonp=vglnk_jsonp_13877458281136
The ruu is not to be flashed with fastboot commands, you must run the exe file
Here's the latest ruu
http://click.xda-developers.com/api....05.651 .5&jsonp=vglnk_jsonp_138775039936710
-extract zip to a folder on your pc
-using fastboot, type this cmd: fastboot oem lock this will relock the bootloader
-from pc, run ARUWizard.exe from the extracted folder. it will run the RUU utility & flash back to stock
Sent from my HTCONE using Tapatalk
Installing Ubuntu
Not Linux savy at all, but I'll install Ubuntu. I'll let you know when I'm able to boot into it. Thanks.
tdhite said:
Are you Linux savvy at all? All this crap is far easier on Linux. I guarantee the drivers are absolute cakewalk -- there isn't a specific driver at all, just a rule to tell the kernel about the device.
I can give you the udev rule for the phone if you are sick of trying to get Windows to work. The Android SDK is also quite easy to install.
If you want to try, just install Ubuntu 12.04 LTS. Later versions also work, but that version is the current stable release. I can help from there.
Click to expand...
Click to collapse
Ogre77497 said:
Not Linux savy at all, but I'll install Ubuntu. I'll let you know when I'm able to boot into it. Thanks.
Click to expand...
Click to collapse
When you get it installed, login and open a terminal windows (it'll install Unity by default, so click on the first button on the left sidebar and search for terminal, then click on it), then type exactly the following (cut/copy/paste should do it too) noting that the first command will make you give your password since sudo requests root level access:
sudo apt-get update -y
sudo apt-get install -y wget openjdk-7-jdk
wget http://dl.google.com/android/android-sdk_r22.3-linux.tgz
mkdir ~/bin
cd ~/bin
tar xvzf ~/android-sdk_r22.3-linux.tgz
cat >> ~/.bashrc <<EOF
if [ -d ${HOME}/bin/android-sdk-linux ]; then
PATH+=":${HOME}/bin/android-sdk-linux/tools"
PATH+=":${HOME}/bin/android-sdk-linux/platform-tools"
fi
export PATH
EOF
exit
That last command will exit the terminal. Start another and it'll read the .bashrc file and presto -- you have SDK access from everywhere.
Then, type this command:
android
That will bring up the SDK UI -- let it download/install all of the latest stuff (r22 of the tools and whatnot).
When done, close the android SDK window.
Type adb (bet it works), but fastboot will require root access (I'm not going to teach you how to get around that yet -- no problem, you just run sudo and I'll show that in a sec).
Finally, plug in your HTC One and type adb devices and let's see if it didn't just know it already.
Lemme know.
Ubuntu 12.04 LTS Installed
I have Linux running on my Dell laptop. No internet though. Something about installing broadcom drivers ..
What do I need to do, sir?
tdhite said:
Are you Linux savvy at all? All this crap is far easier on Linux. I guarantee the drivers are absolute cakewalk -- there isn't a specific driver at all, just a rule to tell the kernel about the device.
I can give you the udev rule for the phone if you are sick of trying to get Windows to work. The Android SDK is also quite easy to install.
If you want to try, just install Ubuntu 12.04 LTS. Later versions also work, but that version is the current stable release. I can help from there.
Click to expand...
Click to collapse
Ogre77497 said:
I have Linux running on my Dell laptop. No internet though. Something about installing broadcom drivers ..
What do I need to do, sir?
Click to expand...
Click to collapse
Check PM
bigdaddy619 said:
Check PM
Click to expand...
Click to collapse
@bigdaddy619 probably got you covered, but if not, let me know. Your friend for Broadcom chips on Dell boxes is here:
https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx
The gist is pretty simple. If you don't know which wireless you have, do this:
1) widen your terminal window so you have ample room (good and wide);
2) run sudo lspci -v
Hunt down the Broadcom info -- it'll say which device is your broadcom wifi. Just need the numbers.
Working ..
I feel like I'm making some progress here, but it's still not being recognized. Everything worked great up until ...
After closing the SDK window, I connected the HTC One, and "Fastboot USB" came up on my phone. I typed adb devices and got a line "List of Devices attached" by nothing was showing as being attached.
If I enter a fastboot command, it hangs saying "waiting on device".
tdhite said:
When you get it installed, login and open a terminal windows (it'll install Unity by default, so click on the first button on the left sidebar and search for terminal, then click on it), then type exactly the following (cut/copy/paste should do it too) noting that the first command will make you give your password since sudo requests root level access:
sudo apt-get update -y
sudo apt-get install -y wget openjdk-7-jdk
wget http://dl.google.com/android/android-sdk_r22.3-linux.tgz
mkdir ~/bin
cd ~/bin
tar xvzf ~/android-sdk_r22.3-linux.tgz
cat >> ~/.bashrc <<EOF
if [ -d ${HOME}/bin/android-sdk-linux ]; then
PATH+=":${HOME}/bin/android-sdk-linux/tools"
PATH+=":${HOME}/bin/android-sdk-linux/platform-tools"
fi
export PATH
EOF
exit
That last command will exit the terminal. Start another and it'll read the .bashrc file and presto -- you have SDK access from everywhere.
Then, type this command:
android
That will bring up the SDK UI -- let it download/install all of the latest stuff (r22 of the tools and whatnot).
When done, close the android SDK window.
Type adb (bet it works), but fastboot will require root access (I'm not going to teach you how to get around that yet -- no problem, you just run sudo and I'll show that in a sec).
Finally, plug in your HTC One and type adb devices and let's see if it didn't just know it already.
Lemme know.
Click to expand...
Click to collapse
Ogre77497 said:
I feel like I'm making some progress here ....
Click to expand...
Click to collapse
Hang in, writing you some instructions, just a few minutes -- just need to get a udev rule into place but I want to make it easy for you.
---------- Post added at 08:18 PM ---------- Previous post was at 07:50 PM ----------
tdhite said:
Hang in, writing you some instructions, just a few minutes -- just need to get a udev rule into place but I want to make it easy for you.
Click to expand...
Click to collapse
Actually -- let's walk before we run. I loaded up Ubuntu real quick to assure I can duplicate what I want you to see. So, do this:
1) connect (if not already connected) the HTC to the usb port so you get 'fastboot (usb)' as normal;
2) type the following:
sudo su
lsusb -v >/tmp/lsusb.txt
chmod 666 /tmp/lsbusb.txt
exit
Now, edit that file in the text editor (just search for 'edit' like you did for 'termina' and select the "Text Editor". When you get that open, have it "File | Open" the file above -- /tmp/lsusb.txt
Then look through for text similar to what I give below. If we get that -- I need the idVendor line -- it should read: "idVendor 0x0bb4 High Tech Computer Corp."
I copied some sample output from my own machine so you can see how it should look:
--------
probably a bunch of stuff we don't care about, then something like...
Bus 001 Device 005: ID 0bb4:0ff0 High Tech Computer Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bb4 High Tech Computer Corp.
idProduct 0x0ff0
bcdDevice 1.00
iManufacturer 1 htc, Inc
iProduct 2 Android 1.0
iSerial 3 XXXXXXXXXXXX (I X'd this out -- it'll be your device serial id).
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
and a bunch more stuff...
If we don't see that, we got troubles. If we do -- we'll make a udev rule to load it up for adb and fastboot.
It appears he's bricked, when we first mounted the phone to the PC and it tried to install drivers we got QHSUSB_DLOAD which usually indicates a brick.
The strange thing was we could still access fastbootusb and the PC would recognize it being in fastboot. But any other command then fastboot devices would lock up the bootloader and fail.
Getting Closer
That's exactly it. "idVendor 0x0bb4 High Tech Computer Corp."
Finally, something worked. Thanks.
Now, edit that file in the text editor (just search for 'edit' like you did for 'termina' and select the "Text Editor". When you get that open, have it "File | Open" the file above -- /tmp/lsusb.txt
Then look through for text similar to what I give below. If we get that -- I need the idVendor line -- it should read: "idVendor 0x0bb4 High Tech Computer Corp."