Linux on Blue Angel - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hi folks
I Just found a dusted "Blue Angel" Device in the cupboard, that I always wanted to use with Linux but had already given up some time ago.
Now, before selling it off at ebay, I wanted to give it another try and was delighted to see the "idiots guide" on this wiki page:
[xda-developers wiki ]BlueAngel_Linux
What happened so far:
I go to buy a SD-Card of 2GB (couldn't get a smaller one at my local store), put the image on it and give it a try.
It boots and brings up a familiar login prompt.
I login with root/rootme and get: "can't access tty; job control turned off" and a shell prompt.
The keyboard only works partially (only letters, no punctuation) so i can't even type "cd.." to navigate
Googling and looking at some (wiki-)pages here, at handhelds.org and linuxtogo.org didn't help me any further yet.
My Questions:
Did I do something wrong up to here?
What to do to make the keyboard working (did I mention it's a german Device?)
Can I launch some kind of GUI at this point (heck I don't even know if the Image contained GPE or OPIE ;-) ) or is the "can't access tty.." a problem i have to fix first?
Is there a more up to date image (to fix the keyboard-issue) I can use with the idiots guide or some evenly up to date documentation out there? I'm a regular Linux-User on the desktop and not afraid of the command-line?
Device Info:
Model No: PH20B
ROM Version: 1.22.01 GER
ExtROM-Version: 1.22.182 GER
Radio Version 1.06.00
I hope someone can help me on this before I go the ebay path
Greetings from .de
Markus

ubuntudude said:
Hi folks
I Just found a dusted "Blue Angel" Device in the cupboard, that I always wanted to use with Linux but had already given up some time ago.
Now, before selling it off at ebay, I wanted to give it another try and was delighted to see the "idiots guide" on this wiki page:
[xda-developers wiki ]BlueAngel_Linux
What happened so far:
I go to buy a SD-Card of 2GB (couldn't get a smaller one at my local store), put the image on it and give it a try.
It boots and brings up a familiar login prompt.
I login with root/rootme and get: "can't access tty; job control turned off" and a shell prompt.
The keyboard only works partially (only letters, no punctuation) so i can't even type "cd.." to navigate
Googling and looking at some (wiki-)pages here, at handhelds.org and linuxtogo.org didn't help me any further yet.
My Questions:
Did I do something wrong up to here?
What to do to make the keyboard working (did I mention it's a german Device?)
Can I launch some kind of GUI at this point (heck I don't even know if the Image contained GPE or OPIE ;-) ) or is the "can't access tty.." a problem i have to fix first?
Is there a more up to date image (to fix the keyboard-issue) I can use with the idiots guide or some evenly up to date documentation out there? I'm a regular Linux-User on the desktop and not afraid of the command-line?
Device Info:
Model No: PH20B
ROM Version: 1.22.01 GER
ExtROM-Version: 1.22.182 GER
Radio Version 1.06.00
I hope someone can help me on this before I go the ebay path
Greetings from .de
Markus
Click to expand...
Click to collapse
I have QTopiaII working on my BA, the instructions are a bit scattered and kinda confusing (and very, very outdated), but you should be able to run it without having to input any code into the HaRet prompt. It should do everything by itself. If I can, I will upload the contents of my SD later today so that you can try to d/l directly onto your card.
It could also be that you are running an older version of HaRet...

egzthunder1 said:
I have QTopiaII working on my BA, the instructions are a bit scattered and kinda confusing (and very, very outdated),
Click to expand...
Click to collapse
Yes indeed
but you should be able to run it without having to input any code into the HaRet prompt. It should do everything by itself. If I can, I will upload the contents of my SD later today so that you can try to d/l directly onto your card.
Click to expand...
Click to collapse
That would be great for a test-run! Thanx in advance I think a gzipped (iso?) image file would do it, I'll transfer that to the SD using dd.
It could also be that you are running an older version of HaRet...
Click to expand...
Click to collapse
I must admit that I don't really unterstand the HaRET magic yet. Didn't find any documentation until now.
Can you point me to some usable Documentation for my project? At the moment I'm interested in:
- HaRET (how to configure and use it, up-to-date downloads)
- How to build a SD-Image by yourself (I stepped on something similar at handhelds.org but that seemed really outdated.)
- Any info readable by a non-developing but willing to learn human
Thanks again, Markus

qtopia
i have tried qtopia in my BA if u run the HaRET it will generate a img file in u r sd card it is about 200 mb why dont u try to copy img file to the sd card

ubuntudude said:
Yes indeed
That would be great for a test-run! Thanx in advance I think a gzipped (iso?) image file would do it, I'll transfer that to the SD using dd.
I must admit that I don't really unterstand the HaRET magic yet. Didn't find any documentation until now.
Can you point me to some usable Documentation for my project? At the moment I'm interested in:
- HaRET (how to configure and use it, up-to-date downloads)
- How to build a SD-Image by yourself (I stepped on something similar at handhelds.org but that seemed really outdated.)
- Any info readable by a non-developing but willing to learn human
Thanks again, Markus
Click to expand...
Click to collapse
I don't know much about HaReT myself, but I do know that you have to have the right parameters on the default.txt (or config file) otherwise, the thing will either crash or not boot (and this is where it can get tricky).
As far as the SD image, I was trying to get something to make an image of an SD not too long ago and I found a program called Winhex, which can make images of sd cards. However, you need to get the full version to be able to mount the image on a card. You mentioned something else in your post. Are you using a different program for SD images? I would love to know about this program if you have one.
I haven't forgotten about the things on the SD card, I will post them (SD image is not necessary though) but I just haven't had the time.

-go to: http://www.linuxtogo.org/~htcpxa/htcblueangel/Qtopia/
-download Qtopia-Linux-htcblueangel.exe and QtopiaPhone-image.rootfs.tar.bz2
-copy them to sd card, make sure you have at least 200-300 mb free
-start Qtopia-Linux-htcblueangel.exe,for the first time it will generate a 200 mb root file, so it could take a while
-next time you boot in qtopia it is much faster.
ps: you dont have to edit text files in this case.
ps2: also on irc-freenode there are developers who managed to install even ubuntu on there phones

Related

Pre-production problems

Hi!
I've got a pre-production version of the Qtek 9090.
The ROM version was 0.9x something and I had some troubles with it so I figured I would just update it... Shouldn't have done that
Anyway, I got hold of a strange update file, called "HA_RUU_12100_112_00125.exe" and ran it on my PC. Not that bright, one might think :?
The device would not fully boot up. I then took out the battery and waited a coupple of minutes. After that it booted up nicely. However, the device is not fully functional and when I look in the "Device Information" it says:
ROM version: 1.21.00 WWE
ROM date: 07/28/04
Radio version: DM FAIL
Protocol version: DM FAIL
PRL version: N/A
ExtROM version: 1.21.112 WWE
I've tried upgrading it using all the tools and instructions that I could find on this great forum but with no luck..
The DeviceData app brings back a strange txt-file that looks a bit like this:
PH20A1 A 1 WWE E [and some strange characters] 1.21.00 0 0 1.21.112 DM FAIL
I would be VERY grateful if someone could help me back to a fully functional device!!
Bump!
!!!Help!!!
so, why don't you just try using a non-strange file to upgrade your device then?
Help!
I am, you know! :lol:
I've tried upgrading it using all the tools and instructions that I could find on this great forum but with no luck..
Click to expand...
Click to collapse
maybe upgrading the radio stack using the SD method would solve your issue, however, you'll need an SD backup of a working Radio rom for this.
there is a 1.06.01_sd_img.rar (german i think)
and a NTRW_ImageQtec9090.rar (no idea which language)
on the ftp
THANK YOU!!!
I'll give a try right away!
What does the "NTRW"-file do?
Can I upgrade the radio stack without any 120-errors?
A quick question:
Do a use Winhex or some other tool to copy the data to the SD card?
To be more specific:
What tools do you use to copy the .nb1 file to the SD card?
Help!
xdatools is used to program sd cards with rom image.
I've tried the version of XDATools that I found on Jeff Summers page. It says "Invalid file size" and that the image should be a certain size. The Radiostack is not that size..
Anyone?!
Getting Image on XDA III / PDA2k from SD
Just use "ntrw.exe" - search forum for location. That runs in DOS and will copy the .nb1 image you can get from the ftp to an SD card in one command. Insert card/enter bootloader and it worked for me (but not the radio as it hung there - i also have a pre production model)
chris
I've got the 2.03 version of the Bootloader and it will not detect the card...
Do you know how I can upgrade it?
Strange - I had 2.03 too - but after I applied the 1.06....sd_img file from ftp it uploaded to 2.05 - so i was in the same position as you and got it working.
I am not 100% sure it was that file i tried first - it might have been
ntrw_imageQtec9090.rar also in the ftp archives.
Either way I do find some images dont work - so i also found and used psdwrite.exe and that seemed to work when writing images using ntrw.exe did not. I am sure there is something else wrong- but find that between these 2 I can create bootable Sd images that at least get the device up and running.
I am still struggling to upgrade the radio stack - as with the 0.9x version none of the "mainstream" upgrades work - they all fail complaining about the radio stack version.
Good luck - i think you must be close!
Thank you Hampers!
Progress! I got the Bootloader to accept the Qtec.nb1. It takes about 40seconds before it reacts and after that it says:
"
SD Download
=========
Selection=1
Not allow
update!
"
Quite strange, don't you think?!
Just make a copy of your 9090's ROM with romupdate.exe and ntrw and copy the firtst 416 bytes from that to the image file you are trying to flash by overwriting them. Then it will allow the update
Just make a copy of your 9090's ROM with romupdate.exe
Click to expand...
Click to collapse
I would like to but when I give the command "d2s", it runs a checksum test, starts to copy and finally fails with the message "Add record is error!" (Even I speak better English than that )
The SD card now contains a bit of information from my Qtek. When I try to re-flash it with this information it returns the same message as usual; "Sections=1 Not allow update!"

Radio v. 1.10.0

I have O2 XDA III (german), with radio rom v.1.10.0.
I've tried to find the way how to backup that rom and upload it to FTP. Can someone tell me how to do that. I've searched the wiki, but I didn't found the real solution.
Do I need to use XDArit or XDAtools? Can I do it under Win98, or I need WinXP/2000?
I have SD card and SD card reader.
I've described the process here:
http://forum.xda-developers.com/viewtopic.php?t=18128#98117
You can do this under Win98.
mamaich said:
I've described the process here:
http://forum.xda-developers.com/viewtopic.php?t=18128#98117
You can do this under Win98.
Click to expand...
Click to collapse
I've tried this and it doesn't work. When I press ok, I don't get terminal window. I've also tried this using COM2 (thats my modem) and it works fine, but with usb I don't get nothing
you should terminate Activesync before running MTTY. Kill processes wcescomm.exe and wcesmgr.exe with task manager and enter bootloader on your device (press and hold power+camera buttons and reset). The screen would write "serial ...", insert it into cradle, screen would write "USB ...". Run MTTY, select "usb" or "\\.\wcescom01" port and everything should work.
And don.t forget to do a backup, this will hard reset your device.
Thanks in advance for sharing your Radio! I've asked in any Forum, i know, but nobody seemed to cooperate. So it is great hearing somebody helps us.
mamaich said:
you should terminate Activesync before running MTTY. Kill processes wcescomm.exe and wcesmgr.exe with task manager and enter bootloader on your device (press and hold power+camera buttons and reset). The screen would write "serial ...", insert it into cradle, screen would write "USB ...". Run MTTY, select "usb" or "\\.\wcescom01" port and everything should work.
And don.t forget to do a backup, this will hard reset your device.
Click to expand...
Click to collapse
The problem was in win98, in WinXP everything worked fine. So, this stuff doesn't work with win98. When I backuped it, I couldn't transfer the backup on my computer (ntrw transfers 256Mbytes and says that something is wrong with the image). I think the problem is that I have MMC card, not SD card. I should get SD card today, and I hope that everything will work then.
Hope the upload will work, just put it in the root dir, as you can not put it in any of the folders.
Curious to see if this further improves GSM/GPRS etc...cheers!
Can't wait to hear the feedback on the 1.10 radio. I was going to go 1.08 but seems like a waste when this one is so close.
Ok, HappyGoat, do you have the path you saved too for this magic Radio?
1.08 is nice, works fine. Of course I must upgrade for no reason other than insanity, hence Im looking for the file.
Thanks
Rich
Is it also possible to extract the whole ROM from your device, so that I can update my SPV M2000 with your O2 ROM?
Any news about this new radio rom?
ringram said:
Ok, HappyGoat, do you have the path you saved too for this magic Radio?
1.08 is nice, works fine. Of course I must upgrade for no reason other than insanity, hence Im looking for the file.
Thanks
Rich
Click to expand...
Click to collapse
The Radio 1.08.00 is available again on the ftp server. Have a look in the BlueAngel folder, it's in there.
Any progress on getting the radio 1.10.00 version...?
I've borrowed SD card from a friend, and I have to bring it back until saturday. So, I need some quick answers.
It is 256Mbyte SD card. I've done the procedure of backup like instructed. You can see my log in attachment.
After that I put the card in Transcend 7 in 1 card reader. I've used ntrw to backup the SD on my computer, but something is wrong. It creates 256MByte file on my computer. The picture of console window is in attachment. I did like I was instructed, and i've also tried "d2s" (to backup only WinCE) and all combinations (only Radio Rom etc.), but the result is the same.
Any suggestions? I really need to do this quickly.
Try this command in DOS:
Code:
C:\ntrw read XDAIIs.nb1 i:
Just might work, not sure. In either case, thanks alot for trying and sharing this with us...
No ideas?
DreamerNS said:
I've borrowed SD card from a friend, and I have to bring it back until saturday. So, I need some quick answers.
It is 256Mbyte SD card. I've done the procedure of backup like instructed. You can see my log in attachment.
After that I put the card in Transcend 7 in 1 card reader. I've used ntrw to backup the SD on my computer, but something is wrong. It creates 256MByte file on my computer. The picture of console window is in attachment. I did like I was instructed, and i've also tried "d2s" (to backup only WinCE) and all combinations (only Radio Rom etc.), but the result is the same.
Any suggestions? I really need to do this quickly.
Click to expand...
Click to collapse
DreamerNS,
it is normal that you get a 256MB file, because your card has this kind of size!
The ntrw tool makes a full copy of your SD card it don't know how much data on your card is stored.
So make a full backup of your XDA, zip the 256MB file and upload the file to the ftp site.
Greetings
osch
DreamerNS said:
No ideas?
Click to expand...
Click to collapse
My suggestion did not work?
HappyGoat said:
DreamerNS said:
No ideas?
Click to expand...
Click to collapse
My suggestion did not work?
Click to expand...
Click to collapse
No. It is just filename, you can put anything you like there. it can be xdaIIs.nb1 or xdaIII.nb1 or IdontKnow.nb1 it doesnt change things, but thanks anyway.
It's too much for me to upload 256Mbytes. I have only dialup connection. Is there any way to extract radio rom from 256Mbyte file? If everything is allright, why is it says "ReadFile(): xdaIII.nb1 -- parameter is incorect"?
DreamerNS,
The unused bytes in the 256MB file will probably be zeros, and should compress to just a few kb.
Back in the days when mp3 FTP sites were all the rage (before P2P) I used to take advantage of highly compressable data like that. Sometimes you'd get a site where you'd have to upload a certain amount of MP3s before you could download. All you'd have to do is create a huge black .BMP file and rename it .mp3. Thanks to dial up modems automatic compression, you could upload a 10MB "mp3" in seconds! Hehehe
-no1
Going back to the problem, is I: the correct drive letter for your card reader's SD slot?
-no1

xda IIS

hey i have just purchased a o2 XDA IIS and it has came with windows mobile 2003se,i tried to update this by downloading
Helmi_BA_WM2k5_AKU3.5_v1.4.VanillaVersion.RAR
i extracted this to a folder of the same name and ran
BaUpgradeUt.exe
the software checks the device and says
Error 120: country ID error 22-22-03cvmf68-N-N
and the only choice i have is to exit!
what am i doing wrong as i couldnt find a step by step guide to flashing the o2 xda iis
if this has bin covered in a previous post i apologise and a link to sed post would be much appreciated!
regards
ady
(a new and excited user in the world of ppc's)
all instructions are on he wiki
http://wiki.xda-developers.com/index.php?pagename=Helmi
this is the phone in question, am i in the right section or is this phone a Himalaya.
it has a slide out keyboard and wifi b
http://img144.imageshack.us/img144/6727/dsc02900mediummi5.jpg
http://img144.imageshack.us/img144/1457/dsc02903mediumod5.jpg
eehm?? http://wiki.xda-developers.com read it whole, there are pictures of phones.
Come on ady you can make it!
kk attempt 2
so far i have downloaded Helmi_BA_WM2k5_AKU_3.5_v.1.4
which wen extracted has 5 folders
i moved the nbf file from Helmi_BA_WM2k5_AKU3.5_v.1.4 to PH20B1
andon my phone i ran GetDeviceData, this gave me the results
PH20B 0 BWWE E O2___001 1.31.00 0 0 1.31.139 1.06.00 06.00
using this data i then ran setoperator in cmd, and typed
SetOperator 02001 .
i am now at this stage and unsure how to carry on!
i am sorry if it has been discussed before, but i really dont want to brick my device as it was a bday n xmas pressie and dnt have the money to buy another
regards
ady
(thankyou for your patience it is much appreciated)
Why are doing something you dont understand, there's no need to hurry.
You should read the wiki once again - and slowly and more carefully!
Why did you move the .nbf to PH20B1 folder?!
Do you know what your device is?
Why did you type "SetOperator 02001"? Where it was written?
i got the information to do that from the readme in the
\Helmi_BA_WM2k5_AKU_3.5_v.1.4\Helmi_BA_WM2k5_AKU3.5_v.1.4 folder
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
WM5 ROM Installation Instructions
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
1. Modify the operator in the ROM as needed
Open a command window and execute: SetOperator ????
- Replace ???? with your Operator Information
- i.e.: T-MOB101, or Vodafone, or O2, or ...
To get your Operator information, you will need to use GetDeviceData
Refer to the XDA-Developers Wiki for further information
http://wiki.xda-developers.com/index.php?pagename=GetDeviceData
2. Copy the NK.NBF to folder that match ur device (PH20B/PH20B)
this seems to be inline with what is said on
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted
sorry for bin a bit slow, im used to double clickin on a firmware update!lol
regards
ady
Wrong answer
1. I moved .nbf file to to PH20B1 folder even thought I have PH20B device as can be read in DeviceData.txt given by GetDeviceData. (I moved it there because there are setoperator.bat xda3nbftool.exe but its still wrong folder)
2. I typed 02001 even thought the proper string looks diferrent.
I didnt read the wiki carefully but I am afraid of breaking my device...
sorry i was not trying to sound ungratefull at all by my previous post
on wikipedia what section would it be best for me to read?
the upgrading to wm5 (as i am still on wm2003se), or the introduction threads?
thanks
ady
(is it as simple as copying the NK.NBF into the ph20b folder and double clicking the BaUpgradeUt.exe?)
To be honest you should read everything. Start with introduction threads then focus on FAQ and make sure you understand terms such as EXTROM, Storage, RADIO and so on.
Then you can read some older threads and try to get as much information as possible.
After 1-3hours of reading you will be able to flash device and solve "every" difficulties by your own. Also you have to know problems related to WM5
ady2002 said:
hey i have just purchased a o2 XDA IIS and it has came with windows mobile 2003se,i tried to update this by downloading
Helmi_BA_WM2k5_AKU3.5_v1.4.VanillaVersion.RAR
i extracted this to a folder of the same name and ran
BaUpgradeUt.exe
the software checks the device and says
Error 120: country ID error 22-22-03cvmf68-N-N
and the only choice i have is to exit!
what am i doing wrong as i couldnt find a step by step guide to flashing the o2 xda iis
if this has bin covered in a previous post i apologise and a link to sed post would be much appreciated!
regards
ady
(a new and excited user in the world of ppc's)
Click to expand...
Click to collapse
just use this tool
no ID upgrade tool
well just to play it safe for the time been i updated to the newest version available on the 02 site
Xda_IIs_Upgrade_v140242
what are the benefits (if any) to upgrading to wm5
ady2002 said:
well just to play it safe for the time been i updated to the newest version available on the 02 site
Xda_IIs_Upgrade_v140242
what are the benefits (if any) to upgrading to wm5
Click to expand...
Click to collapse
The primary benefit is that power loss doesn't cause a hard-reset and loss of data. No need for backup software like you have on 2003.
There isn't a lot to the upgrade, however understanding what is going on is key if you don't want to risk damage. WRT the country ID stuff, that info is a bit outdated. There is a "no-id" upgrade exe that ignores it.
In short the steps are:
backup using activesync for contacts etc
make the extrom directory on your SD card
resize storage (if you want, you probably do)
do the upgade
thanks for the help fraser, last question why would i need to resize my memory (by that do you mean the sd card)
i have an empty 512mb, but would like to use it for normal storage after the flash has been successful.
would tht be a problem?
There is no real need to resize it, it's just convienient. I used to always install most apps to the phone and only larger ones like games go on the SD-card. That way i can change the SD-card (e.g. for music) and most of my apps are still available. However, I do have a 2gig card myself and I find myself rarely taking it out these days.
cheers, so i can skip stage 3
thanks again
i read through wikipedia and as i understand all i have to do is copy the folder "EXTROM" to \Storage Card\EXTROM
go into boot mode and then run from the pc "Helmi_BA_WM2k5_AKU_3.5_v.1.4\PH20B\MaUpgradeUt_noID.exe"
and then soft reset after flash
is that correct?
thanks again
ady

Dead Xda IIS

Guys, i need some help. Recently i came across the rom update for my xda iis, so i decide to take it out of my drawer and see if i can update it with HELMI_BA_WM6_R0_Public. I followed all the steps and try to upgrade it, after i click on HELMI_BA_WM6_R0_.exe, my xda iis restart on cradle and after that nothing happen. I notice it only appear on the top with the word "serial" and the bottom "v2.06". I have tried in vain to get it working again, please try to help as im very new to this. Im using window Vista.
since apparently, you are not that experienced in flashing your device, i would recommend you use windows xp to flash your device.
then you have a look at this wiki wizard:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1_WM2003SE0
this is a step by step instruction on how to upgrade from wm2003 to wm6.
please follow it precisely, even if you don't see a point in certain steps, they are all important!!!
if you, however, don't understand a step or a phrase, feel free to re-post, and i will explain it to you in more detail.
have fun with the upgrading, one word of advise: take your time, the first upgrade with storage resize radio upgrade, sim unlock and other stuff can last an hour or two (not the upgrade itself, but the process you go through). when you remember the steps and feel like you want a different rom, after testing this one, all you have to do is donload a "nk.nbf" file and flash it, and the entire update takes you 5 minutes then
Hi Chef_tony, thanks for the reply. I went to the link u gave me and from the 1st step on im stuck. It ask me to download both the unlocker and Repart and place it on the phone, but i cant do anything with the phone except for the "Serial" on top and "V2.06" below, it does change to "usb" when i cradle it. please help. thanks again
ok, then at that point you are stuck in boot loader, that happened to me too.
the reason for that might not be that interesting to you now, but it is because vista in the middle of the flashing process vista thinks it needs new drivers, downloads them and then it disconnects the device, something that shouldn't be done while flashing, as everyone knows.
these wiki links explain how to flash from vista using modified drivers, but i wanna tell you in advance, that i personally never got it running, i always use a windows xp machine:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista_Pic
so, still i want to state that the best way to flash is a xp computer, if you have access to one, use that to flash your original shipped rom first, to resize the storage (first wizard step) afterwards.
theoretically, a virtual machine, running xp would also work, if you still have an xp cd lying around, you can download virtual pc 2007 from microsoft, it is free and you just need a short time to set up a virtual xp machine, because i can guarantee you, you will flash more than one rom, once you started on the topic.
remember, you need to flash your shiped rom, then you want to flash the helmi rom, then maybe a rom update and probably you are not staying with that rom forever, since it is wm6, there is also wm6.1 and wm6.5 to follow that.
what i want to say is:
- try the flashing with vista option described in the wiki links above
- if that doesn't work, try to get to an xp computer and follow the steps
- flash your original shipped rom first
- then the wiki wizard steps in again
Problem is solve, thank you so much chef_tony. my next question is...where can i get wm6.1 rom as all the link i had is dead
according to another user, this thread's links are still working:
http://forum.xda-developers.com/showthread.php?t=403421
but it does not contain office. (you can still try other office download links, if you need it)
just by the tiny size of the extrom i would say there is hardly anything contained, but anyway, that is a rom i used too, and it is quite nice, also look up IOLITE stuff in this forum for extra apps.
make sure to repost if everything went to plan
I found a working wm6.1 pro on another website and its working great! It contain office as well. Thing now is i didnt adjust the memory and i didnt have enough space to install every software that i had
This is the link http://www.4shared.com/file/66810499/8a61be24/HTC-BA5220758WWE_v302_25M_PP-16M_RAMdisk_a.html?s=1
By the way chef_tony, you happen to have any idea how to open up BA, cause i would love to clean it up on the inside.
1. the thing is, the storage resize is important for 2 reasons:
- sure, with the resize you woulld have 16mb more storage memory for installing programs and storing stuff
- you still have your original extrom on the device, which is not compatible with newer roms, meaning, instead of simply copying the extrom to an sd card to have a basic setup and installing programs you need to install cabs manually
which is why i said to follow the steps precisely, now you have 16mb of space you simply can't access from wm6 at all, and for a resize you'd have to go back to wm2003 first but give your rom a try first, maybe it is not the perfect one for you after all, then you still have the opportunity to re-flash.
2. i am glad you found a valid link, many people post their roms to hosters that take it down after a while, expecially when there are no more downloads of that item, and so, many links posted here half a year ago are not working anymore, which is sad, since there are still a lot of people, including you, that would like to go to wm5, wm6 or wm6.1 and not just the newest wm6.5 builds, but, whatever, you found your rom and hopefully kept the files stored on your pc for future reflashing...
3. there are two basic disassembling guides for the BA:
- the official service manual (also good for repairs, since they explain each step):
http://www.4pda-service.ru/netcat_f.../BLUE ANGEL/HTC_Blue_Angel_Service_manual.pdf
- the manual made by a forum user:
http://www.land-of-kain.de/ppc/mda3/disassembly/
i am glad it all worked out for you so far and you will realize that this old device has a lot of potential, when you keep it up to date (and clean ).
Thanks you so much for the help. I'll try to update if the link is dead someday, by the way..i have 43mb storage and 84mb programme, is that good or bad?
the program memory is normal, but the storage should be 16 mb more, so instead of 43.XX you would have 60.30mb.
that is the extrom resize mentioned before.
- you need to flash your original rom for that
- then copy the "xda-developers unlocker" and the "repart_doc.exe" to your device. (attached below)
- you install the extrom unlocker
- then you go to start menu and extrom unlocker
- you execute "unhide"
- then unlock
- then start the repart_doc and set the size to 128kb
then you can lock the extrom and hide it again.
maybe in that process there is a soft reset required, i don't remember.
the reason why you do all that is because the extrom memory is hidden and locked and contains a bunch of cabs, that install automatically, when you hard reset the device.
so after that, you can reflash your wm6 rom, and you'll see, that after you resized and formatted that space, your memory dialogue will show 60.30mb of storage memory (plus it gives you the opportunity to install wm6 extroms from the sd card).

G1 rooting problems

Hello everybody,
I try to root my 1.6 G1 for many days now. Followed many more tutorials. TheUnlockr, YouTube, XDA-Dev and other Android-Forums.
The problem is an error message when I try to flash the 1.5 Update. Everytime it says "00028002 Not allow". Tried the flashing process with so many DREAIMG.nbh's from different websites. Tried the US and the UK Version but nothing, really nothing worked.
And now, after Google and all these tutorials didn't work, I ask you for help. I hope that i won't get stupid posts =)
Thanks in advance!
did you format to FAT32?
I really don't know. I normally use Mac OS X 10.6.2 and don't know how to format there. Under Windows 7 which I use with BootCamp I right-clicked the SD-Card and selected "format..." but then there is an error message too like "not found". I don't have an adapter for the microSD. Do you have any Tips for me?
i'm not sure about other ways to format (anyone, lend a hand please?) but i think you need it to be FAT32.
EDIT: disk utility. i think you can get it there. just backup beforehand.
I Googled for formatting under Macintosh. FAT works, but there's no option for FAT32... Really need help.
Could anyone post me the "best" files/tutorial for downgrading a german G1, please?
19SK91 said:
I Googled for formatting under Macintosh. FAT works, but there's no option for FAT32... Really need help.
Could anyone post me the "best" files/tutorial for downgrading a german G1, please?
Click to expand...
Click to collapse
Well read the edit in my post. Some say Disk Utility works for FAT32, some say it doesn't. Hmm, i don't have macintosh so i can't really try it ATM.
Disk Utility was what I tried. But I just have these options:
4 times "Mac OS X Extended" and "MS-DOS Dateisystem (FAT)". Don't think that this is right.
But do you have a link to a tutorial for rooting a german G1 at 1.6? Because the files I downloaded always had different sizes and I don't know which the right one is/was?
19SK91 said:
Disk Utility was what I tried. But I just have these options:
4 times "Mac OS X Extended" and "MS-DOS Dateisystem (FAT)". Don't think that this is right.
But do you have a link to a tutorial for rooting a german G1 at 1.6? Because the files I downloaded always had different sizes and I don't know which the right one is/was?
Click to expand...
Click to collapse
Fat32 might be a windows only format just like EXT is a linux only format, so you will need to find a program that can do it like paragon or have a friend format it on their computer.
I do have Windows but it always says that the SD card can't be found. Don't know why.
I connect the G1 to my MacBook and run Windows 7. I mount USB and choose the SD card in Windows. Then I right-click on it and say "format...". After that it seems that the G1 automatically dismounts the SD card so that Windows can't find it...
Edit: How does the G1 itself format the SD card?
Edit 2: After formatting G1 in Mac (MS-DOS (FAT)) it said that something's wrong with the SD card and Android wanted me to format it again. I did it but Windows doesn't find the SD card anymore -.-'
Edit 3: G1 also doesn't find the SD card anymore xD
Formatted the SD card to FAT32 but the problem doesn't disappear...
Will try it now with RC7 instead of RC29. Don't think that it'll work because I already tried this before but who cares...
Edit: RC7 also doensn't work. I tried to install the "signed-kila-ota-148830.de6a94ca" update too. But after a while it says "Installation aborted"... I really need help!!
19SK91 said:
Formatted the SD card to FAT32 but the problem doesn't disappear...
Will try it now with RC7 instead of RC29. Don't think that it'll work because I already tried this before but who cares...
Edit: RC7 also doensn't work. I tried to install the "signed-kila-ota-148830.de6a94ca" update too. But after a while it says "Installation aborted"... I really need help!!
Click to expand...
Click to collapse
Alright put your sd card back into your g1. Unmount it in settings, then format it from there. When it's done, plug your g1 back into your computer or use and sd card reader (Personally, I prefer the card reader.) I use a mac based laptop as well, but i put windows on it as a partition. (I needa play my games ) See if your computer detects it now. And what do you mean that the problem doesn't disappear? Wasn't your problem the fact that the card didn't format?
No, the original problem is/was, that I can't get back to 1.5. No matter what file I choose, this damn "00028... Not Allow" problem appears everytime.
19SK91 said:
Formatted the SD card to FAT32 but the problem doesn't disappear...
Will try it now with RC7 instead of RC29. Don't think that it'll work because I already tried this before but who cares...
Edit: RC7 also doensn't work. I tried to install the "signed-kila-ota-148830.de6a94ca" update too. But after a while it says "Installation aborted"... I really need help!!
Click to expand...
Click to collapse
Na bra... go ahead an try one more thing..
Macs by default automatically unzip files when downloaded from the internet.
So if this is the case, the file your downloading isn't in the correct format (atleast for the phone). You can even try re-zipping the file but its not gonna work. This happened to me, the only way to fix it is to change the Mac preferences to not automatically unzip/open/handle files downloaded. Its been so long I cant remember the right steps in order to do this. But Im pretty sure thats why you're getting hung up. If you have a Windows availible to you, try downloading it again on the PC and moving it to your SD and see if it works Oo. Or just change your Mac settings and redownload. This MIGHT be your problem.
On second though, this might not be your problem. But maybe worth a try.
19SK91 said:
Hello everybody,
I try to root my 1.6 G1 for many days now. Followed many more tutorials. TheUnlockr, YouTube, XDA-Dev and other Android-Forums.
The problem is an error message when I try to flash the 1.5 Update. Everytime it says "00028002 Not allow". Tried the flashing process with so many DREAIMG.nbh's from different websites. Tried the US and the UK Version but nothing, really nothing worked.
And now, after Google and all these tutorials didn't work, I ask you for help. I hope that i won't get stupid posts =)
Thanks in advance!
Click to expand...
Click to collapse
Looking at your info, I'm assuming you're using a German G1
If that's the case I'm pretty sure you have to use the goldcard method to downgrade your G1 then root.
I'm not 100% sure on this, but based on what you've already tried and the flag below your location and post count, it might be a good idea to read up on it and try another method.
Check this thread out for a little more detail
http://forum.xda-developers.com/showthread.php?t=485364
@nopotential: So, could you tell me how to change this in the settings? 'Cause I right-clicked on a .zip, chose "open with..." and said "The unarchiver". Then i said "always open with" but it doesn't work...
@jackslim: I do have Windows 7 and the MacBook Pro does have a SD card reader but I do not have an adapter... Is there any chance to do this without a WM Device (If this is also Windows 7 ^^)?!
@all: Does anybody have a good downgrading tutorial für GERMAN/EUROPEAN G1s that worked for him/her too? That would be really nice.
By the way: What time is it in the US now? Is it in the morning?!
I'm just piecing together bits of other information I've found on various posts, so this may or may not work. Since you'll be using a macbook you should be able to dd to the sdcard
The first thing you need to do is get the CID of your SD Card
You can do this with adb, if you need help setting up adb see here
After ADB is setup
*Make sure on your phone you go to settings -> applications -> development and make sure USB Debugging is checked
check that it is working by opening a terminal and using
Code:
adb devices (enter)
If you see a serial number it's working, if not refer back to the adb setup guide and check for what you may have missed. If you seen a serial number do the next step
Code:
adb shell (enter)
cat /sys/class/mmc_host/mmc1/mmc1:*/cid (enter)
Now you should have the CID of your SD Card (write it down exactly). If you know an easier way to get this info directly from your macbook, feel free to try it that way.
Once you have your CID, go to this website scroll to the bottom, enter your email and cid as directed to, then wait for the email with your goldcard img
Once you recieve your goldcard.img, on your mac open a terminal, go to the directory you saved the goldcard.img to and
Code:
dd if=goldcard.img of=/path/to/your/sdcard bs=384 (enter)
*Note: Change /path/to/your/sdcard to what it actually is
Now add DREAIMG.nbh to the SD Card, and reboot your phone into the bootloader Camera + Power **Cross Fingers While You Wait*** And hopefully it will work
I don't have a Mac, never even used a Mac. I'm just piecing bits of information from different posts in an attempt to assist you downgrade. Although none of these steps should cause any damage to your Macbook/PC/Phone/House/Leg/Car or grandchildren. Try these steps at your own risk
And inresponse to the current time in the US, it's approximately 11:10 am on the eastern coast
Whoa, thanks for this. I don't know how to show you how thankful I am in english ^^
At the moment I'm not able to try this 'cause I'm busy but I'll post the result of it =)
Thanks again.
Also see this post
It specifically says for a Dutch phone, but I think most continental G1's that are having the downgrade problem require the same method to fix it

Categories

Resources