Hey does anyone know of a widget that i could put on my homescreen to put my phone to sleep... i feel like having to hit the power button everytime is a bit annoying. Trackball wake takes care of getting the screen on but what about off?
Thanks guys
Any ideas? Or how hars would it even be possible?
So you want to replace pressing a single button, with pressing another single button..
I can understand his concerns, since people've reported that their power buttons have gotten worn off/need longer to press/etc. It's why I've taken up using Reboot Control for rebooting and powering down and Lockbot to press any button to wake up the phone. Another widget or app for turning off the screen would be great too, IMO.
grainysand said:
I can understand his concerns, since people've reported that their power buttons have gotten worn off/need longer to press/etc. It's why I've taken up using Reboot Control for rebooting and powering down and Lockbot to press any button to wake up the phone. Another widget or app for turning off the screen would be great too, IMO.
Click to expand...
Click to collapse
am also having to use reboot control for this matter, having an extra standby widget would be perfect.
After wake with trackball, this is second most wanted for me (and i'll not touch power button again). There is a thread in app's section, but no replies till now. Can it be so difficult???
Even if there's no way to directly turn off the screen, there should be some way around it by doing something like saving the current screen timeout time, setting the screen timeout time to 0 (or somewhere between 0 and 1) so the screen will turn off, then set a timer for like 1 second to reset the screen timeout time to the original time?
grainysand said:
I can understand his concerns, since people've reported that their power buttons have gotten worn off/need longer to press/etc. It's why I've taken up using Reboot Control for rebooting and powering down and Lockbot to press any button to wake up the phone. Another widget or app for turning off the screen would be great too, IMO.
Click to expand...
Click to collapse
Will pressing any button work with the Nexus One's non physical buttons (back, menu, home, search)?
Not the capacitive buttons, nope, just the volume rocker and the tracknipple.
grainysand said:
Not the capacitive buttons, nope, just the volume rocker and the tracknipple.
Click to expand...
Click to collapse
Aww thought it might be possible to use a button which wouldn't become loose or unresponsive after too much use.
I feel like the power button would benefit in te long run from not being pressed multiple times per day and much more convienent to tap a widget on screen
I'm all for it. either an app or a widget, some short cut that can be added to the home screen to put it to sleep.
scottypimpin636 said:
...either an app or a widget, some short cut that can be added to the home screen to put it to sleep.
Click to expand...
Click to collapse
Yeah would be great!
grainysand said:
Not the capacitive buttons, nope, just the volume rocker and the tracknipple.
Click to expand...
Click to collapse
Ha! Tracknipple... funny as sh!t!!
maybe even double click trackball or long press one of the soft keys along the bottom of the screen
A widget would be a cool option instead of beating the power button to death
Why not just shorten the up time to less then 15 seconds?
Then you have too switch the time whenever your reading the news or a text longer than15 seconds.
So is a widget like this even possible?
Any news on this matter? Is it possible?
rori~ said:
Yeah would be great!
Click to expand...
Click to collapse
Second that. It seems my power button is beginning to fail already.
Related
My finger hurts since I have to press the power button (small and flat) too many times a day to wake the diamond from sleep. you can argue that I can set the phone not to sleep but sleep is a must to save battery. using all keys to wake it up can cause any keys to be easily hit by accident, which drains battery fast too. Power button is meant to be used rarely, like the PC reset button.
is there a better way to wake up the diamond? is it possible to configure ONLY the OK (center) button to do this? like the iphone, you just press the OK button. it is big and does not hurt as much?
How exactly do you keep pressing the power button till your finger hurts?
Vulpix said:
How exactly do you keep pressing the power button till your finger hurts?
Click to expand...
Click to collapse
hit it once does not hurt but every time it go to sleep and I have to hit the button to wake it up. that is when it hurts.
let say I set it to go to sleep every 40 sec. how many time does it go to sleep in an hours? at least couple times.
foxnews said:
My finger hurts since I have to press the power button (small and flat) too many times a day to wake the diamond from sleep. you can argue that I can set the phone not to sleep but sleep is a must to save battery. using all keys to wake it up can cause any keys to be easily hit by accident, which drains battery fast too. Power button is meant to be used rarely, like the PC reset button.
is there a better way to wake up the diamond? is it possible to configure ONLY the OK (center) button to do this? like the iphone, you just press the OK button. it is big and does not hurt as much?
Click to expand...
Click to collapse
I've found that the pressure required on the Power Button can depend on the particular Diamond. I've owned two US Diamonds and the first had a difficult Power Button while the second was much easier. Either way, another option to turn it on is to pull out the stylus a short distance - this will wake the Diamond as well. As far as using the center of the D-Pad - I've no idea . . .
wpsantennas said:
I've found that the pressure required on the Power Button can depend on the particular Diamond. I've owned two US Diamonds and the first had a difficult Power Button while the second was much easier. Either way, another option to turn it on is to pull out the stylus a short distance - this will wake the Diamond as well. As far as using the center of the D-Pad - I've no idea . . .
Click to expand...
Click to collapse
even though using the stylus is less painful but it takes more steps: get finger nail in the gap, pull it out, then push it back in. if you do these steps many time over an hour, it would be tidious task.
On my diamond responsivity of the power button depends strongly on where I'm pressing it. You can try to press it different ways and find out where you get most tactile feedback of the micro-switch. I have the impression that for me it is when I'm pressing from behind, more on the left of it.
You guys are insanely lazy...
Vulpix said:
You guys are insanely lazy...
Click to expand...
Click to collapse
lol i have to concur
I think that would be a very good feature for the phone. I am sure most of us would use it.
C'MON XDA EXPERTS, help us on this one...
foxnews said:
My finger hurts since I have to press the power button (small and flat) too many times a day to wake the diamond from sleep. you can argue that I can set the phone not to sleep but sleep is a must to save battery. using all keys to wake it up can cause any keys to be easily hit by accident, which drains battery fast too. Power button is meant to be used rarely, like the PC reset button.
is there a better way to wake up the diamond? is it possible to configure ONLY the OK (center) button to do this? like the iphone, you just press the OK button. it is big and does not hurt as much?
Click to expand...
Click to collapse
start>settings>system> Key Lock .. then set to "Do Not lock buttons".
then all you need to do is press the centre button to wake the diamond!!
EASY
gtpete said:
start>settings>system> Key Lock .. then set to "Do Not lock buttons".
then all you need to do is press the centre button to wake the diamond!!
EASY
Click to expand...
Click to collapse
Yes, but other keys such as volumn, home, back, answer and end key are also unlocked. Anyway, there are all hardware keys available to press opening the phone in additon to the default on/off button. I am now using this option.
ya but they will complain that all the buttons are unlocked. that method is just TOO easy.
edit: OMG i was right. and too slow. hahaha
maybe next time the phone can get u a beer or work for you...man...
Surely this is the Answer..?
OK, the way I see solving this is to have the phone wait longer before auto-locking.
To sort this, go to the following..
Start\Settings\System\Power\Advanced..
Go to 2nd option - It's a tick Box labelled "Turn off Device if not used for.." and adjust it to suit..
This is found in the manual..?
Cheers,
Phil.
pointless response to a pointless thread...
gtpete said:
start>settings>system> Key Lock .. then set to "Do Not lock buttons".
then all you need to do is press the centre button to wake the diamond!!
EASY
Click to expand...
Click to collapse
well, it´s maybe less a matter of laziness than of speed, my last phone was a slider ... slide, it wakes up, slide, it goes to sleep - superquick
with the diamond it takes one step more:
I use the option "do not lock buttons" in combination with S2U2, most often I press the ok button and slide to unlock
to put the phone to sleep, I press the power button or use gyrator: I just have to turn the phone face down, than the screen goes off (with S2U2 locking)
hm, maybe I should have bought the diamond pro, but diamond is sexier
gtpete said:
start>settings>system> Key Lock .. then set to "Do Not lock buttons".
then all you need to do is press the centre button to wake the diamond!!
EASY
Click to expand...
Click to collapse
all hardware buttons wake the diamond then. at least on mine
And how do you turn it off without the power button?
hgrimberg said:
And how do you turn it off without the power button?
Click to expand...
Click to collapse
http://wmpoweruser.com/?p=982
OMG!!!
What a baby, hurting finger....c'mon!!
Power button switches screen on, same button switches screen off. Job done.
Have you ever hit your finger with a hammer and your nail goes black....That hurts!!!
On my Tilt, EVERY BUTTON [except left, right, up, down, and select] will cause it to WAKE-UP from sleep mode.
How can I prevent this???
I would like just the OK button to wake up my device.
Thank you
neely30188 said:
On my Tilt, EVERY BUTTON [except left, right, up, down, and select] will cause it to WAKE-UP from sleep mode.
How can I prevent this???
I would like just the OK button to wake up my device.
Thank you
Click to expand...
Click to collapse
I've never seen anything that allows this.. It's the four hard buttons (2 phone/win/ok) and power, or just the Power button.
It's in the Key Lock preference under System.
Personally I'd like it if I could do something like hit one of the four hard buttons and another button immediately after or it powers off. If I set it where all the hard buttons will turn it on I find it turned on every time I take it out of my horizontal pouch. But if it was set to some very simple key 'combination' it'd be easy to turn on myself (vs the tiny power button) but wouldn't stay on all the time in my pouch.
That is my point, either No buttons wake-up except the hard to get to power button or all buttons wake-up.
I there a registry hack that will allow the power button and one other button, maybe the OK button to wake the device up??
Hey yall, Back when I didn't know any better I had an iphone and the power button was broken so I had an app that when I double clicked the home button it would turn off the screen.
I went to CM setting and found the thing that let me use the trackball to turn ON the phone, but Is it possible to get something simialer to what I had on the iPhone? a double click to turn off the screen thingy for the trackball?
Reteach yourself to use the power button the correct way.
Yeah that ^
Seriously you are going to kill the life of that track ball lol
I'd like to know an answer to this too, simply because my power button no longer works!
defroster said:
I'd like to know an answer to this too, simply because my power button no longer works!
Click to expand...
Click to collapse
you can use power off widgets i see some in market there is some for reboot and i i remember well another to power off but need root
is there any possible way to be able to touch the screen and return its from the timed out backlight insted of the power button then the actual unlocking....
Not sure about touching screen, but there's an app called NoLock that will make it so there's no lockscreen and hitting the power button unlocks it. Eats battery though.
steadilyshine said:
is there any possible way to be able to touch the screen and return its from the timed out backlight insted of the power button then the actual unlocking....
Click to expand...
Click to collapse
Is there any way? Probably. Is it a good idea? Probably not. Just having the screen up to your thigh in your pocket would be enough to turn the screen on and thus drain your battery.
Not just drain your battery, but imagine calling people unexpectedly, random texting, somehow enabling options and selecting factory reset . There's a reason why there's a lock/unlock button.
Being a lefty, I wish you could turn the screen on using the volume buttons instead.
ThisWasATriumph said:
Being a lefty, I wish you could turn the screen on using the volume buttons instead.
Click to expand...
Click to collapse
I can. Hold them for a second and the screen should turn on when you release them. If it doesn't let me know I'd like to investigate further.
Guardian_Bob said:
I can. Hold them for a second and the screen should turn on when you release them. If it doesn't let me know I'd like to investigate further.
Click to expand...
Click to collapse
Nope, not working. It turns it on using NoLock but then that just changes the volume too.
Im running Darkys 7 btw.
Guardian_Bob said:
I can. Hold them for a second and the screen should turn on when you release them. If it doesn't let me know I'd like to investigate further.
Click to expand...
Click to collapse
Holding the volume button does not turn on the screen, you probably touched the power button with you middle finger which holding the volume button with your thumb.
Widget Locker
Try the app WidgetLocker--it's a couple bucks but lets you turn on the screen with the volume buttons if you want (any hardware button). It will also let you customize your lockscreen with widgets and unlock the screen using the soft keys at the bottom if you so desire.
Mentioned this app in previous threads, should really start getting a cut from the developer.
saint168 said:
Holding the volume button does not turn on the screen, you probably touched the power button with you middle finger which holding the volume button with your thumb.
Click to expand...
Click to collapse
You really should believe people when they say something works. Just because your rom works one way doesn't mean anything about everyone else.
Now if someone would give me a link to the roms which don't unlock due to the volume buttons, I might be able to fix that.
lmao love the music
Guardian_Bob said:
You really should believe people when they say something works. Just because your rom works one way doesn't mean anything about everyone else.
Now if someone would give me a link to the roms which don't unlock due to the volume buttons, I might be able to fix that.
Click to expand...
Click to collapse
I am not using a custom ROM. Maybe some custom ROM has that feature added but it definitely does not work on stock AT&T ROM.
Works on stock 2.2 Froyo leak ROM
avs420 said:
Works on stock 2.2 Froyo leak ROM
Click to expand...
Click to collapse
That's not a stock ROM by any means.
I wish the volume buttons were lower on the case. I have a tendency to squeeze them with my finger when pressing the power button one-handed.
9 out of 10 screenshots I take are by accident when I'm trying to press the power button to turn the screen off. With the volume buttons opposite the power button, it's too easy to press them. Is there a way to change how a screenshot is taken?
Enable the swipe gesture in advance features
Sent from my SM-N9600 using Tapatalk
That's already on, but the other way I'm talking about is still active.
Hold you phone differently, unless your hands are so monstrous that preventing your fingers from pressing the volume button is impossible.
Thanks for the Apple-grade suggestion like I've got bad reception on my iPhone. lol
Holding the phone as usual in my right hand, it's not typically a problem. But frequently if it's in my left or I do a quick reach with either to turn the screen on and view notifications and turn it back off, I end up with an accidental screenshot. If I could make it require a momentary hold of the buttons before it takes a screenshot, it would do the trick.
Jwikoff99 said:
Thanks for the Apple-grade suggestion like I've got bad reception on my iPhone. lol
Holding the phone as usual in my right hand, it's not typically a problem. But frequently if it's in my left or I do a quick reach with either to turn the screen on and view notifications and turn it back off, I end up with an accidental screenshot. If I could make it require a momentary hold of the buttons before it takes a screenshot, it would do the trick.
Click to expand...
Click to collapse
You could try installing a Bixby button remapper. Many of them allow you to set different functions to your hardware/mechanical buttons & or set delays of different intervals while keeping the current buttons doing the usual stock actions. If you are rooted you only need to install once. If you are stock UnRooted you need to run adb commands every time you turn off or reboot but this is the only option I can think of that will do what you need done. Bxactions is one app and another is button Mapper. Cheers & hope this helps you out.