Database Develop

Help The Noobs

Will someone be kind enough for all the noobs out there and post a complete video of how to get from a completely stock firmware to (well in this case) this hero build, or the newest, latest, or best working hero build. While showing the order to flash radios, spls, and such using the ADB. It will help out a lot of people trust me. And from the looks of all the noobs right now youll have so many views, subscribers, followers or whatever your motive is. Please help noobs out.
If you need it you can find some free desktop recorders to enhance your video here: http://download.cnet.com/windows/vid...ftware/?tag=bc
Completey safe downloads from cnet.
Remember stock to hero!
I would do this myself but i myself do not know how and am on my second g1.
Thank you!

i will have a go at making that over the weekend.

milestone.it said:
i will have a go at making that over the weekend.
Click to expand...
Click to collapse
Thanks a billion. You dont know how much this will help people. Post a link here when your finished please

Since this thread is for the "noobs", I have a couple of questions to ask.
Excuse my not using the search fully. There are just so many threads and so many responses and none of them are completely clear.
If I were to root my phone with the latest Hero ROM that has flash playet 10, will I still need to upgrade the firmware to 1.5 or is this particular ROM built on 1.5 or what??
Also, does this latest Hero ROM have the famed HTC virtual keyboard or no??

OutstandingO said:
Since this thread is for the "noobs", I have a couple of questions to ask.
Excuse my not using the search fully. There are just so many threads and so many responses and none of them are completely clear.
If I were to root my phone with the latest Hero ROM that has flash playet 10, will I still need to upgrade the firmware to 1.5 or is this particular ROM built on 1.5 or what??
Also, does this latest Hero ROM have the famed HTC virtual keyboard or no??
Click to expand...
Click to collapse
Honestly idk but maybe someone will see this thread and answer that for you or you can start a new thread

There are quite a few videos out there already that show you how its done. Maybe not directly toHero but the whole process is the same - http://www.youtube.com/watch?v=DDPFhJ9noLA
So instead of using JF 1.31, simply use the Hero ROM of your choice, rename it as "update.zip" and put it on the root of your SD card. Turn off your G1, hold the HOME button and press POWER to get into the Recovery image. Press ALT+W (to wipe) then ALT+S (to flash the ROM).
EDIT: I forgot some very crucial information >_< IF you are going to Hero from Stock you do require a few other things. Namely the new Radio and the new SPL (depending on which Hero ROM you pick). Make sure though that whatever you do, you upgrade the radio first to avoid bricking your G1. Look at my signature for links to what you need, like the Radio, SPL etc.
Wait patiently and all should be well...
@OutstandingO
Hero is basically Cupcake (1.5) but with a different interface created by HTC using custom code. So you just flash the Hero ROM of choice and that's it.

root video
OutstandingO said:
Since this thread is for the "noobs", I have a couple of questions to ask.
Excuse my not using the search fully. There are just so many threads and so many responses and none of them are completely clear.
If I were to root my phone with the latest Hero ROM that has flash playet 10, will I still need to upgrade the firmware to 1.5 or is this particular ROM built on 1.5 or what??
Also, does this latest Hero ROM have the famed HTC virtual keyboard or no??
Click to expand...
Click to collapse
YouTube has plenty of view on rooting that's where I learned how to do it, they also have the files u need to root it right there for u to download. Just search it and u will find it. The guy who's vid I followed is tony moreno look for his bids. I don't recommend jumping from 1.1 to hero. Go from 1.0 to 1.1 then jump to 1.5. Also hero is built from 1.5. I myself have tried it but even with all the optimizing its not fast enough for me. It also has the famed HTC IME keyboard. I myself use JF 1.5 APD. With the Hero theme in the themes section with the HTC keyboard. Flash would be nice but it still has issues with speed and force closings. Like I said YouTube the rooting process and search around the thread for other stuff like and and how to use fastboot.

I forgot some crucial information, namely to upgrade the Radio first and that you might need to upgrade the SPL. Have edited my post.

That is in part something that threw me for a loop.
I've seen multiple vids for rooting but none of them seem to address this whole "Radio" issue that you brought up and the steps surrounding that. From what I have been reading this is the most important part.
I love this site but the type of people that post here are guys that already know what their doing in most cases and they speak and post as such.
So have I ever developed an app for the G1, no, but I'm not Danny Dunderhead either. I can read a set of instructions if laid out for me.
So I ask you more experienced gentlemen, can someone either post a link or give me step by step help in checking my "radio", upgrading my "radio" and then installing the ROM??
I would greatly appreciate it.

I did it! I bricked my G1!
Yeah, well...what can you do. I read over the posts here, watched youtube videos, and searched the web as well. Read and viewed everything I could until I couldn't take it anymore. Then...I tried. Tried and failed? No, tried and died.
MAN, I WANT HERO! I am more jealous with every video I see. I don't care if it's a little slow. It is pure Android beauty. But...
There is so much information out there, not just at this forum, but all over the net. And although there are many similarities between the instructions (I use that term loosely for some), many have different steps so it's hard to tell which to follow. Apparently taking what you feel are the best from each is not the way to go. Really, I'm not stupid about these things...well...
So, here is where I started; a T-Mobile G1 running the latest OTA 1.5 update and the 2.22.19.26I radio software. Used Parted Magic to create a 5GB FAT32 and a 1GB EXT2 partition on the SD card. I downloaded everything I though I would need or could find. The original boot and recovery img's along with RC29, RC30, and Cupcake zips. Then I got HardSPL and a bunch of files from Hayruko. I got JeseusFreke, CyanogenMod, and JACHero stuff. Hell, someone said to download the Telnet.apk and put it on the SD card as well. Did that. I found a great thread for installing the JACHero, but it did not go into rooting your phone first. Did that need to be done? I guessed it did. So I started there. Downgraded nicely to RC29. That was easy. Then even went through the telnet and terminal emulator steps. Then trouble. Which recovery.img to use? Some instructions reference the testkeys and some don't when rooting. Figured I would do it that way. So I went through those steps. Loaded CyanogenMods 1.3.1 and 1.33.2005 SPL on the SD card. Flashed (I thought) the recovery.img. Rebooted to get ready to install the SPL. Stuck at t-Mobile G1 now! They really do call it a brick for a reason.
So now that I got that off my chest, a few questions. First, I want to run HERO. I want it! However, I would like to make a request this time. Could someone please post step by step instructions for taking a stock G1 to the JACHero 2.3.4 release. Not just "flash the recovery and SPL" files. I would like more detailed directions. If you know of a good link to send me, please tell me. I thank you in advance for your time. I know it's a real pain in the ---, but I promise I will pass your knowledge along to another such as I!
A few questions first. I believe the steps are something like this:
1. Downgrade to RC29.
2. Copy recovery_teskeys.img and some recovery.img along with some SPL update.zip file to the SD card and "load" them properly. Which files should you use (does it matter), which order should you do it and how?
3. How do I do a Nandroid backup at this point? Do I need/want to?
4. Do I wipe now? Need to ever? Doesn't the image overwrite everything anyway?
4. Copy update.zip (the renamed JACHero 2.3.4 zip file) to the SD card and load it. Do you need to load any other image first other than JACHero 2.3.4.?
5. Enjoy HTC Hero goodness!
I know I am asking a lot, but I need the steps so I can replicate this easily. I am going to want to do this a lot based on what I see out there. Always something new to try and a lot of great developers out there. Thank you in advance for all of your time and effort. I promise to pass it along.

[Q] The Best ROM for Tmobile in USA with Exchange Support and Tether

Hello All.
I have spent a lot of time reading and am quite confused by all the different ROMs out there.
I live in the US, have T-mobile and need Exchange support and Tehtering. What is the best ROM for me in your opinion.
I am especially interested in ROMs where an easy-to-follow tutorial is available as this is my first G1 mod (but I did mod my Dash quite a few times).
Thanks,
Richard

Cyanogen's builds are the bees knees. Exchange support built into latest releases.
I think you have to download wifitether on the experimental build at the moment.

Can you name a specific build? also, can I get the tethering working in non-experimental roms?
Thanks

yeah. he recently released 3.9.5 which is very nice, you should be able to get the tethering working

My research shows that that is still experimental and has a possibility of bricking a phone. Any news on that? I am more interested in an already-stable release
Richard

Then just go get his stable release. It's in the dev forum also. It's 3.6.8.1 and btw I'm a total noob who has flashed every single experimental release of the cyan builds and flashed haykuro's spl so if I haven't bricked my phone yet I'm sure you will be perfectly fine just flashing that rom.

Google ION.

RDProgrammer said:
My research shows that that is still experimental and has a possibility of bricking a phone. Any news on that? I am more interested in an already-stable release
Richard
Click to expand...
Click to collapse
You don't have to worry about bricking your phone. His rom's don't require the brick SPL.

anyone have a good link to a walkthru on how to go thru the whole process?
Thanks

Everything you will need to root you can find here: XDA ***Informative Threads***

I can follow the root tutorials.
What is the prescribed step-by-step after that? I am hoping to go to the stable version mentioned here or another ROM that supports exchange. There is so much conflicting information on the threads that says to do this or that for this or that and its hard to follow with all the acronyms and such. Any help is appreciated,
Richard

well yo should just get the latest cyanogen image.
i have been flashing all his roms since day 1 and i have never had 1 issue.
for right now ignore any other roms (such as the hero mods from jachero or drizzy) because they are very unstable and slow. since its your first cooked rom your best bet is to flash to cyanogens 3.9.5 and your set. you dont need anything set up except root and your ext2/ext3 partition. no scripts necessary or additional apps to keep your apps to the sd card.
hope this helps.
boot.

http://forum.xda-developers.com/showthread.php?t=533731
^^ That is a great tutorial. ^^
1.4 pimped out recovery image, is truly pimped out. Backing up an image of your phones software to your sdcard only takes a few button presses, same with restoring it. Has other very useful features as well.
Danger SPL is really only needed for certain Hero builds, a partitioned card is good if you need Apps2SD.
In your case: Root it, install 1.4 recovery, then go with Cyanogen 3.6.8.1, install wifiTether.
Btw. If you plan on using wifiTether often, carry a charger or usb cable. It eats your battery quickly.
Enjoy!

Quite a bit of mis-information here.
The poster wants EXCHANGE support. Cyan's rom's do not have true exchange support.
What you need is either a Hero or Rogers ROM. The most stable, fastest, best ROM I've used so far is Soulife Rogers. There is a version that does not require the new SPL if you wish to not upgrade that. You can install WiFi Tether on any rooted phone with any ROM.
http://forum.xda-developers.com/showthread.php?t=523608 - Soulife Rogers
You'll want to root your phone first, then run the latest cyan recovery (1.4) - partition your SD card for fat32, ext2, linux-swap. Then run "upgrade_fs" to upgrade to ext3... install the soulife rom. Then install swapper from the market and select "linux partition" from the menu.
This is a pretty vague how-to, if you need more help feel free to ask.
This is the setup that I currently run. I get no force-closes, no lags, no freeze ups, everything is lightning fast plus FULL exchange (contacts/calendar/email) and even the HTC Dialer. Soulife's ROM is probably the best ROM available at this point.

Google ION.
Click to expand...
Click to collapse
I second this. With HK's SPL it gives you about 80 mb of free internal memory. Plus its super fast.
I havent tried Cyan's roms yet, mainly bc I dont feel like having to partition SD Card, then run a swapper on the thing. I want my phone just to work by itself, not with the addition of all these extra processes.
This is in no way a dig at Cyan, he's a great developer with (obviously) great stuff. But if you just want an Update.zip that you throw on your SD Card and update with amazing results I recommend Ion.

vr24 said:
The poster wants EXCHANGE support. Cyan's rom's do not have true exchange support.
Click to expand...
Click to collapse
Egad, I forgot about the calendar and contacts. I was just thinking of the mail application.
Good catch.

Does ION have FULL exchange support? If it's the Rogers ION port than it should.
Also, swapper isn't required. It's silly not to use it though as it speeds up the phone.

I havent tried Cyan's roms yet, mainly bc I dont feel like having to partition SD Card, then run a swapper on the thing. I want my phone just to work by itself, not with the addition of all these extra processes.
Click to expand...
Click to collapse
quick note, in Cyan's ROMs you do not need to partition your SD card. if your card is not partitioned, it will not use the features and still runs smooth and fast. OK so maybe it won't be quite as fast as when using a swap, but it's definately fine without it.
Back on topic, i too would generally recomend Cyan's ROMs, but sadly no exchange, try a Roger's ROM, either by Soul-life or TheDude.
to install, if you have already rooted your phone and installed a custom ROM, simply download the ROM, rename it to update.zip, place it on the root of your SD card. Reboot phone holding HOME and POWER. i recomend a wipe if you're switching ROMs, so press ALT+W to wipe, then press ALT+S to apply the update. when it's done, press HOME+BACK to reboot your phone. It will take a little longer to boot after a flash, that's normal so don't panic.
hope that helps

senaia said:
quick note, in Cyan's ROMs you do not need to partition your SD card. if your card is not partitioned, it will not use the features and still runs smooth and fast. OK so maybe it won't be quite as fast as when using a swap, but it's definately fine without it.
Back on topic, i too would generally recomend Cyan's ROMs, but sadly no exchange, try a Roger's ROM, either by Soul-life or TheDude.
to install, if you have already rooted your phone and installed a custom ROM, simply download the ROM, rename it to update.zip, place it on the root of your SD card. Reboot phone holding HOME and POWER. i recomend a wipe if you're switching ROMs, so press ALT+W to wipe, then press ALT+S to apply the update. when it's done, press HOME+BACK to reboot your phone. It will take a little longer to boot after a flash, that's normal so don't panic.
hope that helps
Click to expand...
Click to collapse
If you are running Cyan's 1.4 recovery, there is no need to rename to update.zip anymore.

vr24 said:
If you are running Cyan's 1.4 recovery, there is no need to rename to update.zip anymore.
Click to expand...
Click to collapse
Haha, thanks for the reminder, i forgot about that part, but if it's any other recovery, then update.zip will do just fine

This can't be happening... [SOLVED]

So today i finally get the gusto mod my phone Android Dev 1. After downloading all the files and following the instructions here i can't get past the black g1 screen (#8). note i can also get the the rgb screen. thats it, but with so many different posts with similar issues, my brain is pounding. At this point if i can get beack to factory, ill live. what i'll hate is the fact that bricked my phone. i'll most likely get screamed on for not searching, but i think i may be searched out. any help would be appreciated.
thanks.
docfu.

first of all dont freak out lol. Download the dreaming.nbh or w/e file from the rooting instructions and place it at the root of the sdcard. Then get into the rgb screen (Camera + Power) and flash it. That should get you back to factory settings. If not, download the update.zip for w/e region you are in place it on your sd card. Enter recovery (Home + Power) and flash the update.

ok...so i tried the DREAMING file and it kept turning up no image found, alternatively i'm not sure what you mean by w/e region update. i ihavent come across that in my searches.

ok dreaming file did infact work. i feel better knowing that the phone isnt bricked. however after running the update when it prompts for action, i hit the trackball and i'm right back at the rgb screen..AGGGHHHH! sorry. i've been at this since 3pm this afternoon.

Chill. Don't freak. You can't just jump in and do something as soon as your read it. Read the whole thing and if you don't have the patients for this work on that before you work on this. bbreath.

I must say start by saying thanks guys. i stepped back, and actually took my [email protected]@ to bed. Rest does wonders. That said. I've accomplished the factory reset. so i back to a stock g1, and boy does it suck. As stated my phone WAS a dev 1. i've already started the upgrade process, my question at this point is where do you recommend i go from here. back to dev 1 or try one of the other roms. i've already installed the spl, and right now im stuck at the telnetd part of the root process. and this too may have me screaming by the end of the day...
any thoughts would be appreciated.

After the recovery image is installed you need to update the radio if you want to install a cupcake 1.5 ROM. You can get it here, rename 'update.zip', place on the SD card and boot in to recovery and flash. Then flash a ROM of your choice. You should be able to do that on RC 30, but I'm not sure if you need to install a rooted image first, so I'd wait for someone else's input before trying that.

I played it extra safe and used the rc29. as far as i know the proper radio is installed. i'll wait around before i do something stupid. thanks for the input tho. i'm trying to learn everything.

ok...so i went back to the original method for obtaining root. i was so frustrated last nite that i ended up trying to combine 2 slightly diff methods. at this point i call them the telnetd method and root.apk method. correct me if im wrong but niether one mentions the other. so i make it to the bootloader running the root.apk it runs thru the list and the fails at radio_v2. now im on the white screen wuth the skateboarders, the radio #says 1.22.12.29. so i run it again i
now im on the rgb screen at proceeds to attept the update again. this time the dreaimg.nbh fails. i'm not freaking out. im good. because i know im almost there. feedback appreciated. thanks in advance.
y'know i never thought about this..but if i reverted a dev phone to factory settings...did i relock everything? and for the record, i only have a mac. if that matters at all.

Future reference ^-^
In case you encounter this problem in the future, cause it can happen with flashing new roms if you skip a step:
You're only bricked if you are stuck at the G1 boot screen but can't get into recovery or fastboot, adb or anything. In cases where you can still get to other phone options to start over, rest assured your phone does still work, just need to step back and figure it out, which you did in this case with a little help ^-^ First few times doing anything to my phone, I went into panic mode a couple of times thinking I bricked until I read around and found out otherwise.
Just in case you didn't know these things, if you did, well, hope it was a nice read? ^-^

doctorfugazi said:
ok...so i went back to the original method for obtaining root. i was so frustrated last nite that i ended up trying to combine 2 slightly diff methods. at this point i call them the telnetd method and root.apk method. correct me if im wrong but niether one mentions the other. so i make it to the bootloader running the root.apk it runs thru the list and the fails at radio_v2. now im on the white screen wuth the skateboarders, the radio #says 1.22.12.29. so i run it again i
now im on the rgb screen at proceeds to attept the update again. this time the dreaimg.nbh fails. i'm not freaking out. im good. because i know im almost there. feedback appreciated. thanks in advance.
y'know i never thought about this..but if i reverted a dev phone to factory settings...did i relock everything? and for the record, i only have a mac. if that matters at all.
Click to expand...
Click to collapse
Well... if you actually purchased a dev phone it should not be sim locked.
Technically... after the rooting process, we all have dev phones with the exception of the sim lock.
So... what SPL are you using?
What ROM are you trying to install? Some roms you should consider partitioning your sdcard.
What radio do you have?
First thing is first.
Get the 1.4 recovery if you haven't done so already. 1.4 Recovery
Because this allows you to select any .zip file without having to rename it to update.zip. This saves on confusion so you don't try flashing a spl (like danger spl )before a radio (could brick your phone).
Second
You need the 1.5 radio to use cupcake. 2.22.19.26I
Third
Consider an spl. You have 4 choices. HARDSPL (Recommended), Eng SPL (what the dev phone defaults with.. skateboarding androids), the standard spl (nondev) and Danger SPL (risk bricking but worth it because you have more memory for your ROMs and can try HERO builds).
Fouth
Find your rom. NOTE: Read each post carefully! If it says you need a specific spl then get it! Otherwise it won't work. Some require the Danger SPL. If you chose a JF rom then you should be alright and don't even need to partition your card and it will work just like the OTA release. Some (such as Cyanogens 3.9.7) are experiemental and are not recommended for noobs.
Fifth (and probably the most important)
ALWAYS BACKUP WITH NANDROID!!!
In the event that you think that you've bricked your phone. I would say that there is a 90% chance that you didn't. As long as you have a nandroid backup and can get to the bootloader then you still have a phone. Just make sure the fastboot.exe file is in your sytem32 directory of your computer. Open CMD and cd to your fastboot backups saved on your computer. Simply
fastboot flash boot boot.img <enter>,
fastboot flash system system.img <enter>,
fastboot flash userdata data.img <enter>
fastboot reboot <enter>
and you should be back to where you were immediately after the point you backed up. Think of it as a system restore for Windows. It couldn't hurt to have a few backups stored.
If you have any questions or problems include information for us to read in a single post and edit as necessary.
Example:
AT&T
Cyanogen 3.9.7 Rom
Recovery 1.4
HARD SPL
Radio 2.22.19.26l
8GB class 4 sd card (7gb fat32/900mb ext3/100mb swap)
Theme version if any.
That way we know what we are working with.
Happy flashing.

rest assured i was in panic mode yesterday. but honestly the only thing i could really do was just step back for a while, meaning get some rest tackle it with a clean head. its frustrating for sure. this one guy tho who posted in the brick think tank thread...just cuz he couldnt figure things out in an hour he got pissed and started screaming waste of time this that and the other. total BI$CH! I was like whoa. I was at that point too. but Im not tryna be that guy.
Now, if could just figure out if i have to start from scratch, i just might be able to get my phone working again in time fro me to go to work tmrw morning.

So... what SPL are you using?
the hard SPL found here
What ROM are you trying to install?
Well i was trying to follow suggestion on something simple, like one of the early jesusfreke's. if i can step it up sure why not. but i'll pass on the partitioned sdcard setup for now.
actually I'll run with JesusFreke JFv1.51 US CRB43
What radio do you have?
radio number listed in my previous post.
Hey thanks by the way for taking the time out of your day to respond to this. i know u guys get your fair share of spazmiesters, so i appreciate it totally.

after doing research it seems that all the current roms require partitioning. or is that optional just for running apps to sd?

partitioning is optional of apps2sd for preformance. some like myself have three partitions, the third being for a linux swap

Ok ive final decided on the dudes cupcake 101. the ? i have now is do i start from scratch. im kind of in limbo as i'm stuck on the bootloader. if remember correctly i got half way thru the root process and it went down hill from there.
TMobile
RC29 / previously Dev 1
Recovery 1.4
HARD SPL
Radio currently 1.22.12.29 / trying to get to 2.22.19.26l
4gb card
(hope i did that right)

doctorfugazi said:
Ok ive final decided on the dudes cupcake 101. the ? i have now is do i start from scratch. im kind of in limbo as i'm stuck on the bootloader. if remember correctly i got half way thru the root process and it went down hill from there.
TMobile
RC29 / previously Dev 1
Recovery 1.4
HARD SPL
Radio currently 1.22.12.29 / trying to get to 2.22.19.26l
4gb card
(hope i did that right)
Click to expand...
Click to collapse
Okay... you have the recommended recovery and spl.
So all you need to do is get your rom and radio and store the zip files to the root of your sdcard. You don't need to rename them.
Just boot in recovery (power+home) and scroll down to:
[Alt+A] apply any zip from sd
And then you should see the zip files.
Upgrade your radio first.
Then your rom.
Another note... make sure you have a data plan once you've installed your rom. Depending on your rom version, you may not be able to sign in without one. If you can't sign in, you can't use your phone which is why most would recommend a custom rom or an adp rom.
Now... if I'm not mistaken... you do NOT have to partition your sdcard to install a rom (unless it's a HERO rom).
You may want to consider doing so however.
The advantages are that you can have virtually unlimited storage for apps and it's much easier to restore them after a wipe because they are still on your sdcard. Some apps will recognize the partitioned sdcard and automatically do all the apps2sd work for you by default. It is also recommended that you use at least a 2gb class4 card at MINIMUM. Any slower then a class 4 may result in system crashes and errors. Any less then a 2gb card is almost not worth all the effort since you'll likely be using at least a quarter of it for the apps2sd. I would suggest buying at least a 8gb class 6 card for less then $50 online. It's both fast and plenty of storage. With apps to sd, if you do need to wipe you still have all of your apps installed. A great advantage of having apps2sd.
Also... try different roms! There are DOZENS out there! Some have the htc music installed, some have myfaves, some have special cameras, etc. Don't be afraid to experiment. As long as you have a backup and can get to the bootloader (skateboarding androids) and a pc, you can't go wrong! If fact... with the 1.4 recovery you can store several different roms on your sdcard, backup your current rom, wipe, flash a new rom to try it, wipe, flash a different rom to try that one, etc. If you decide that you didn't like any of those... just restore back to your previous backup. Simple as that. No pc needed. However having a pc is handy to get logcat information if it's not booting for some reason.
Speaking of roms not booting... while your experimenting with various roms... you MUST have patience. Sometimes (based on my personal experience with about 10+ different roms) they can take up to 15 minutes to boot up. You can literally be staring at the ANDROID or HTC logo this entire time. Unless you are using ddms.bat or adb shell logcat, you will be clueless of whats going on. DO NOT do anything unless you get the infamous "boot loop". This will be obvious. It will stick at the ANDROID or HTC screen for a while and then blink and go back to the logo. If you see it blink and go back to the logo then try pressing power + talk + menu to restart it and then immediately press the home button to bo back to recovery. Wipe... try again. This time it should work. If it doesn't then restore your backup while you research on that partitcular rom. You may have skipped a step or not have the proper requirements (partitioned card, spl, etc).
With all of that said... good luck and you'll be posting help to other users like yourself before you know it.

Hey Doc, if I'm not mistaken (other guys correct me if I'm wrong), if all, and I mean ALL you have is a boot loader (AKA SPL. ie// skating androids or colored bars) you need to reflash dreaimg.nbh to get a system back.
This ALSO flashes your SPL and RADIO back to default so reflash your radio and SPL afterward. (IN THAT ORDER I HOPE)

Binary100100 is a gentleman and a scholar
nicely written response binary.
I can't stress enough how helpful it is to have the sdk working on a computer when flashing new roms. Get ADB working, it'll save you a ton of headaches.

innerspace said:
nicely written response binary.
I can't stress enough how helpful it is to have the sdk working on a computer when flashing new roms. Get ADB working, it'll save you a ton of headaches.
Click to expand...
Click to collapse
Thank you! I do what I can.

Help a newb get on his way w/ Rooted G1

My G1 is rooted and I have updated it to RC33. (during the process, I used HARDSPL)
1. If I plan on using a theme from Drizzy (champion V2) do I still need to do the cupcake update AND the radio update?
2. Is installing this theme as simple as renaming the .zip to "update" and dragging it to SD card. THEN, do I Alt+W, or only Alt+S when I get to restore screen?
Please help if I am way off.

stevedawg85 said:
My G1 is rooted and I have updated it to RC33. (during the process, I used HARDSPL)
1. If I plan on using a theme from Drizzy (champion V2) do I still need to do the cupcake update AND the radio update?
2. Is installing this theme as simple as renaming the .zip to "update" and dragging it to SD card. THEN, do I Alt+W, or only Alt+S when I get to restore screen?
Please help if I am way off.
Click to expand...
Click to collapse
If you are going to use a theme, you need to make sure the theme is intended for that specific rom. You should always update your radio, without updating it you will have BT problems and possibly dropped calls. If you have Cyanogens recovery 1.4 you don't have to rename anything to update any more cause it can flash any .zip file. And you don't have to wipe before flashing a theme.

Thanks for the help.
How do I find out which rom I have and which rom's the .zip support?
I followed a youtube tutorial from anthonymoreno24 and these are the files I used:
Recovery image & HARDSPL from:
http://koushikdutta.blurryfox.com/G1RootWalkthrough/
I will update to cupcake during lunch (I have to use friends SIM cuz I have no data plan )
--------------
EDIT:
Just found this, do I follow these instructions after I update to Cupcake?:
Download image (right-click, save as): http://n0rp.chemlab.org/android/cm-recovery-1.4.img
MD5Sum: f5135a878c705215f4012786e4261cfe
To install image: copy it to your sdcard and run:
Code:
flash_image recovery /sdcard/cm-recovery-1.4.img
If you have problems with a "no space on device" error, try using fastboot and erasing first:
Code:
fastboot erase recovery
fastboot flash recovery cm-recovery-1.4.img

So have you not even loaded any rom yet? If you go to about phone under settings whats the info say?

Sorry, Im a newb, I'm literally following step by step instructions from the youtube vid
FW: 1.1
baseband: 62.33xxxx_1.22xxxx
kernel:2.6.xx-xxx-gfea
[email protected] #1 (kool!!! just noticed this )
Build: kila-user 1.1 PLAT-RC33 126XXXX-xxxwordsxxx
This help? what specific info you need?

Bud, you are a long way off. Drizzy's is not a theme, it is a hero rom which I would not suggest you try since it needs the danger spl and I can see a brick happening already, download cyanogen 4.02 rom and flash that and stick with it before you consider anything else, read the sticky's at the begining of each forum here to get an idea of how android works instead of relaying on a couple month old out of date video. A lot has changed since that was made. Oh and make sure that your file you want to flash is in the root of your sdcard and not in a sub folder otherwise it won't work, biggest thing make a nandroid backup in cm-recovery 1.4

gridlock32404 said:
Bud, you are a long way off. Drizzy's is not a theme, it is a hero rom which I would not suggest you try since it needs the danger spl and I can see a brick happening already, download cyanogen 4.02 rom and flash that and stick with it before you consider anything else, read the sticky's at the begining of each forum here to get an idea of how android works instead of relaying on a couple month old out of date video. A lot has changed since that was made. Oh and make sure that your file you want to flash is in the root of your sdcard and not in a sub folder otherwise it won't work, biggest thing make a nandroid backup in cm-recovery 1.4
Click to expand...
Click to collapse
Took the words right out of my mouth.
OP: If you want to flash anything hero related you need to read read read, if you are asking questions like this, and are this confused then you shouldn't/aren't ready to go hero. Try cyanogen or jacxrom (if you want a different look, it has a nice theme built into it) and after a week or 2 of studying them give hero a shot.
Has anyone else noticed how many people have been posting sh*t like this lately? It seems like noone can read anything anymore and wants us to give them specialized instructions instead of using the GUIDE's like we all did.

crpercodani said:
Took the words right out of my mouth.
OP: If you want to flash anything hero related you need to read read read, if you are asking questions like this, and are this confused then you shouldn't/aren't ready to go hero. Try cyanogen or jacxrom (if you want a different look, it has a nice theme built into it) and after a week or 2 of studying them give hero a shot.
Has anyone else noticed how many people have been posting sh*t like this lately? It seems like noone can read anything anymore and wants us to give them specialized instructions instead of using the GUIDE's like we all did.
Click to expand...
Click to collapse
Agreed. I've noticed that people are like how to I root!?!? I'm such a n00b. There is plenty of literature out there and should learn how like the rest of us did. If you need to be babied into root maybe you shouldn't have root.. or let someone else do it.

agreed
I rooted my phone a couple months ago without asking any ?s, I have still not asked a ? Yet, before I even got my phone, I studied up on it, there is a ton of info and a lot is in the stickysand has been covered countless times. Now it is even easier to root and flash your phone than ever but the problem is people are following videos and blogs that do not provide enough info. I was lucky to find xda back when I had my wing so I knew right were to go from the begining. If people just took notice to the info here they would have no problem at all

gridlock32404 said:
I rooted my phone a couple months ago without asking any ?s, I have still not asked a ? Yet, before I even got my phone, I studied up on it, there is a ton of info and a lot is in the stickysand has been covered countless times.
Click to expand...
Click to collapse
I completely agree, I too read the tutorials many times before I got my phone !
And when I got the phone, I invested almost 2 days ( around 20 hrs) to try different things (Thanks to all for providing guides to everything) and now I am running a fantastic ROM with root.
It feels much better now that instead of asking "How, Why,etc), I am writing "THANK YOU ALL" for fantastic guides and tutorials !

crpercodani said:
Took the words right out of my mouth.
OP: If you want to flash anything hero related you need to read read read, if you are asking questions like this, and are this confused then you shouldn't/aren't ready to go hero. Try cyanogen or jacxrom (if you want a different look, it has a nice theme built into it) and after a week or 2 of studying them give hero a shot.
Has anyone else noticed how many people have been posting sh*t like this lately? It seems like noone can read anything anymore and wants us to give them specialized instructions instead of using the GUIDE's like we all did.
Click to expand...
Click to collapse
FYI, JACxROM requires Haykuro's SPL to run properly as well. If you're using the HardSPL, then your best choice is Cyan's 4.03 or enomther's rooted version of the stock Cupcake CRC1 build.

my bad, I guess since I flashed haykuros spl and the new radio when I first rooted I never relized you needed it for the xrom.

crpercodani said:
my bad, I guess since I flashed haykuros spl and the new radio when I first rooted I never relized you needed it for the xrom.
Click to expand...
Click to collapse
Yeah, actually even the devs didn't realize this until a couple of us did some experimenting. Fortunately, I had two G1s and the only difference with them were the SPLs... one worked and one didn't.

Should I uprade from CM 4.0.4 to 4.1.999?

I see all these new changes in the Change Log and I also know it also incorporates elements of Donut along with it, but I also see all these reports of it being considerably slow. Apart from the minor change in the process used to upgrade I don't see the process to upgrade as difficult. So without consideration to the upgrade process is it worth it to upgrade to 4.1.999?

4.1.999 is based on 1.6, so it is all donut. There are alternatives now to the double flash if you want to go that route. The speed is all based on each phone it is on. Mine in particular is blazing fast. I formatted and repartitioned prior to installing it so that might have something to do with it.

Could you possibly give me more information on this 'Double Flash' technique and what the benefits are, and possibly point to a thread that gives instructions on how to implement this? Also how would partitioning prior to flashing affect the over all speed, and what would I be partitioning, the SD Card?

The double flash is listed in Cyanogens 4.1.999 thread. Basically if you have not already upgraded to 4.1.99 or 4.1.999, you have to download 2 separate files and flash both of them. One is from HTC and the other is the Cyanogen rom. There was also a single flash method that was posted by Daveid yesterday that eliminates the need for flashing both files. If you are still on 4.04, you will need to follow one of those 2 methods to upgrade to 4.1.999. If it were me, I would just go with the single flash method and be done with it. However, I would still backup my sd and reformat and repartition before upgrading just to eliminate all the old garbage on your sd card from preivious builds.

Ahh okay, thats what you meant by 'Double Flash', yes I already knew of that and the single flash Though for some reason I would prefer the longer and "harder" method. Thanks for the tips, ill back up and repartition here in a but.

i personally think 4.1.999 is far from stable. i am still experiencing lots of crash and icons disappear. you should wait until it's stable.
or u can try this rom if you want donut.
http://forum.xda-developers.com/showthread.php?t=567023
quite stable but still have the icons disappear problem. i think it's actually donut's problem.

I couldnt after 6 attempts get it running i am on a G1 and it wouldnt even get past the google email registration screen, and my phone got so hot i thought it was going to melt,that cant be good, i went back to my prevoius
nandriod backup and its perfect, only for using my G1 as a tether i would go back to a stock phone, i dont see any benifits apart from the tether