Several months ago. I found a CAB file that I installed on my HTC Tilt Pro 2. This was only
the cab version someonne had posted. I have clicked through many pages and can't find it anymore. It was only the CAB version. I don't want to have to install this thru active sync. I downloaded and could just go to my memory card and load it, any time. Could someone help me out in finding this CAB file. I have clicked on some and it took me to the microsoft web site. All I need is the file. Thanks so much in advance if you can help me out. Net Frame 3.5 CAB
http://catagprs.evonet.ro/ppc/programe/NetCompactFramework_v3.5_all ppc cab/v.4.5_pe categorie/
Related
Up till last week I had a T-Mobile MDA Compact and I'd got Tomtom (bakonl) running. Now I have a Wizard (T-Mobile from The Netherlands) and I can't install the Tomtom. Appears that WM2005 not compatible with Tomtom Version 5. Anyone got a plan to get arround this? :?:
To install TTN5 on WM5 you have to copy the cab files directly to pda and launch it with the pocket explorer (or resco explorer).
a bit more info to install tomtom and get it working
http://forum.xda-developers.com/viewtopic.php?t=29606
Thanks for the responses guys. I've given it a go and moved the cab files from the CD to my SD card and installed the GPS cab first. Then soft booted the Vario and then attempted to install the TTN cab.
All per the post :-
http://forum.xda-developers.com/viewtopic.php?t=29277&highlight=ttn
However... Still won't install correctly...
Am I doing something wrong?
Any more advice gladly received.
Thanks,
you need te get the tomtom 5.1 files then it works fine. I've got it working on my bleu angel with WM5, and today i installed in on my brother's vario and it worked just fine.
Thanks,
Can I ask... Where did you get the 5.1 files from?
You can download TTN5.1 from the following link
http://www.tomtom.com/updates/ppcupd510.exe
otherwise just use a torrent search engine, you should find it in no time
dalamario said:
You can download TTN5.1 from the following link
http://www.tomtom.com/updates/ppcupd510.exe
Click to expand...
Click to collapse
You need the zip file not the exe. AS4 messes up the installation.
http://www.tomtom.com/updates/ppcupd510.zip
Dear All,
I found this update this week..
http://users.skynet.be/wallpaper/TOMTOM5.1.zip (for more info see http://tomtom3.web-log.nl/log/856067 around - Mondeo :: 20 september 2005 16:18 -).
Note : Download, unzipp... connect your PDA/Phone via Sync cabel/station, setup.exe run. (I have installed it over my (bakonl) 5.0 version.... !!!).
Note 2 : Can ONLY be used if you have a BeNeLux version of bakonl TT5 and only with the BeNeLux map (normal or plus).......
Success with the upgrade.
TomTom with WM6.1 on HTC wizard
Good Morning,
can anybody support me in trying to setup a navigation functionality on my HTC wizard, that runs WindowsMobile 6.1 (those TNT edition)?
Unfortunately i can't find up to date information about which GPS-hardware to use. Is BlooTooth the only reasonable solution for the wizard?
I also plan to feed the tachymeter signal from my bicycle somehow. Has anybody read of approaches to this and can cite or link?
Third thing I'm in search of is an alternative camera software. The "Camera for Pocket PC Version 3.00" does not support geoTagging and not even writing in the Tags for Titling, commenting etc.
Many thanks for your valuable hints in advance.
blausand
Hi all,
I've tried many times to load PHM Registry Editor on my Kaiser with Windows Mobile 6 without success.
Does PHM Registry Editor work with Windows Mobile 6? If not, is there another one that may work?
Thanks,
Phil
Works for me
My installation worked.
mine too.. it is actually one of the few that did work, and pretty good.
mrpotts said:
Hi all,
I've tried many times to load PHM Registry Editor on my Kaiser with Windows Mobile 6 without success.
Does PHM Registry Editor work with Windows Mobile 6? If not, is there another one that may work?
Thanks,
Phil
Click to expand...
Click to collapse
It does work, give us some more details and let's see if we can help.
How far do you get?
Is it a Cab or Exe?
Do you get any error messages?
etc
Alternative - perhaps Total Commander using the //plugins directory.
Mike
Details
Hi,
Okay, that's good news to me, it will work, and it's just me
Here's the details; When I goto http://www.phm.lu/downloads/download.aspx?{940B734A-C437-41C7-ADED-2A4418802FD3}
to download, I've downloaded the ActiveSync (twice) and the CD Redistribution links and tried installing from within the phone and off my laptop via USB and each time I gotten an error on the phone saying the file is not recognizable. What am I doing wrong here?
Cheers,
Phil
mrpotts said:
Hi,
Okay, that's good news to me, it will work, and it's just me
Here's the details; When I goto http://www.phm.lu/downloads/download.aspx?{940B734A-C437-41C7-ADED-2A4418802FD3}
to download, I've downloaded the ActiveSync (twice) and the CD Redistribution links and tried installing from within the phone and off my laptop via USB and each time I gotten an error on the phone saying the file is not recognizable. What am I doing wrong here?
Cheers,
Phil
Click to expand...
Click to collapse
Ok. From this site:
http://www.phm.lu/Products/PocketPC/RegEdit/
Choose this one from the list:
Pocketpc 2002 2003 arm/pxa
Move the unopened cab file to device with AS explorer function.
Tap it to install. (I have mine installed to SD card)
Mike
I have a really good reg editor here if you need it.
(Got it from.... a tool pack)
Since the upload doesn't allow this type of file... i had to zip it
anyway put it on the device of your htc phone and run it from there.
Note: its not an install, its an actual application
Another good reg editor is resco, and total commander.
(total commander's registry is in the root //)
Hi,
Wow, thanks. That worked without a hitch and I opened it up successfully on the phone. Thank you Mike, great help and right to the point. What did I miss? How would I have known that the 'PocketPC 2002.2003 (ARM/PXA)' was the file I needed for a HTC TyTNN II with Windows Mobile 6?
No to look at some of those useful edits, after a complete registry back up of course.
Cheers,
Phil
mrpotts said:
Hi,
Wow, thanks. That worked without a hitch and I opened it up successfully on the phone. Thank you Mike, great help and right to the point. What did I miss? How would I have known that the 'PocketPC 2002.2003 (ARM/PXA)' was the file I needed for a HTC TyTNN II with Windows Mobile 6?
No to look at some of those useful edits, after a complete registry back up of course.
Cheers,
Phil
Click to expand...
Click to collapse
Just for general info on downloading file types:
Many sites offer a choice of different application file types to download I always go for the CAB file rather than the EXE file. The CAB file you install by putting it on the SD Card and tapping it. The advantage is that if you ever need to re-install you do not need your PC, just tap on the CAB again to install it.
For this and most devices nowadays you should choose:
ARM files
POCKETPC or PPC files (not smartphone)
WM5 or WM6 may also be stated. Most WM5 apps will work on WM6 and many WM 2003 apps will also work.
Nearly always if it's an EXE download then this is meant to be opened on the PC with the device connected by AS or Device Centre. Very occassionally you will come across an EXE that has to be put on the device and then run. (these rare files usually have a statement telling you to do this).
Thanks Mike, great info and very useful.
Cheers,
Phil
Ive searched the forum for a couple of hours and i cant find a solution to my questions so i thought id create a new thread.
i have downloaded TomTom, i have the .cab file and the .exe file but neither seem to work.
when executing the .exe file i get to the window where it says 'modify, repair, delete' and then the programs closes. if i pick modify it asks me to do a soft reset, which i do and then nothing happens again after that.
when trying to install the .cab it says i need to update my rom version.
i have just flashed duttys 6.1 rom so wondering what could be the problem?
i have been trying to install tomtom for some time now and i would appreciate any help.
cheers
Hi
What .exe file r u talking about? You only need to copy the .cab file to your phone first, then run it from your phone. As for maps use tomtom HOME software...go to tomtom web site to get it..& install on your comp then use it to install the maps. There's a freebie small map to try though with tomtom if it's your first time using it.
double_dd said:
Ive searched the forum for a couple of hours and i cant find a solution to my questions so i thought id create a new thread.
cheers
Click to expand...
Click to collapse
Searched for hours huh?
Found this in 2 min.
http://forum.xda-developers.com/showthread.php?t=371953
hello
alltheway said:
Searched for hours huh?
Found this in 2 min.
http://forum.xda-developers.com/showthread.php?t=371953
Click to expand...
Click to collapse
The posted thread doesn't relate to the original problem. He can't install the tomtom software. Make sure you have version 6.032.8351 tomtom .cab
My tomtom works just fine.
as stated above my question is not answered, and yes i have searched for hours.
i have the 'Installer_Kaiser_ttn_6_032_8351_HTC_WWE_20070716' .exe file that someone posted on another thread somewhere on here but i cant seem to find it anymore...and i also have the 'ttn_6_032_8351_HTCWWE_Kaiser' .cab file...i know these are just two different types of installation, im just explaining that i have both, and im having trouble with both.
i know that you just put the .cab on the phone and it installs but i get the error message saying a rom needs to be updated.
and with the .exe file do i need to download anything extra before executing it from my pc?
thanks
double_dd said:
as stated above my question is not answered, and yes i have searched for hours.
i have the 'Installer_Kaiser_ttn_6_032_8351_HTC_WWE_20070716' .exe file that someone posted on another thread somewhere on here but i cant seem to find it anymore...and i also have the 'ttn_6_032_8351_HTCWWE_Kaiser' .cab file...i know these are just two different types of installation, im just explaining that i have both, and im having trouble with both.
i know that you just put the .cab on the phone and it installs but i get the error message saying a rom needs to be updated.
and with the .exe file do i need to download anything extra before executing it from my pc?
thanks
Click to expand...
Click to collapse
OK let me clarify this. YOu have flashed dutty 6.1 ROM on your phone successfully correct? If so...
the posted .exe you don't need it..to install tomtom software
and the .cab file posted the name of it doesn't look right..
if you have an email address I can try to email the one I use for you.
http://forum.xda-developers.com/showthread.php?p=1942755
that link above is pretty interesting...never encountered that. Kill all apps that could be causing conflict. If that still doesn't work, try using another cab. I have WM 6.1 3.02 version and mine works totally fine.
how exactly do you upgrade the .NET to 3.5. i downloaded it from the microsoft website and it said it wasnt a valid ppc file.
i used the search function (typed .NET and also tried .NET upgrade) i even tried google. anyway basically all i want this for is so i can use the diamond beer app aswell as any other app i might download or create that might need it.
thank you.
Look here:
http://forum.xda-developers.com/showthread.php?t=468535
install the correct version... correct file is named
NETCFSetupv35.msi (recommended google search)
Greetz
Boris
P.S. you have to install it to ppc from starting it on PC while being connectet to ppc via active sync!!
thanks so i found this site.
http://microsoft-net-compact-framework.en.softonic.com/pocketpc
is there a way to do this with out the active syn. i havent set it up yet and find it easier to just put it on my sd card and install like every other program.
if not thanks for ur help.
I've been trying to install the .NET framework for my Tilt, and it keeps spitting out "installation unsuccessful". It installs fine on my computer, then it goes to install it to my phone via ActiveSync (Windows Mobile Device Center actually because I use Vista). The installation screen on my Tilt pops up saying it's installing, but the bar doesn't move at all, and after a few seconds it just says it's unsuccessful without giving a reason!
I'm using the stock ATT Tilt rom, 6.1 version. I haven't done anything special to it, so I have no idea why it wouldn't work...
Can anyone spare some sage wisdom as to why this won't install? I'm trying to use wmVista and it needs 3.5 to work .
Note: I downloaded the .NET 3.5 right from Microsoft: http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
Have you tried copying the NET CF3.5.cab directly to your Kaiser & then installing. The cab can be found in the installation folder on your PC or on this site if you do a search.
I've always installed from the cab file never from the PC installation so might be worth you trying it !
You might want to get the mobile version of .net 3.5...
http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
Download that to your memory card, then launch it with file explorer on your phone, and it should start to install all on its own. Install it to your device, not the media card, for quicker running .net 3.5, or if you want to save space install it to the media card, but it will run slower...
And FYI, the search function works very well, as well, if you had looked about 5 posts bellow this new one you created you would have seen a thread already dealing with this exact issue.
pjcforpres said:
You might want to get the mobile version of .net 3.5...
http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
Download that to your memory card, then launch it with file explorer on your phone, and it should start to install all on its own. Install it to your device, not the media card, for quicker running .net 3.5, or if you want to save space install it to the media card, but it will run slower...
And FYI, the search function works very well, as well, if you had looked about 5 posts bellow this new one you created you would have seen a thread already dealing with this exact issue.
Click to expand...
Click to collapse
Ah, I saw that thread before posting but I assumed by his first post that his problem was different than mine. I just check it out again and saw the direct downloads for the cab file, so I'm gonna try that out. Thank you for your help!
(I'm a new poster, but I've been lurking around these boards for a while now looking for stuff for my Tilt)
Hopefully this works...
i installed .NET CF 3.5 on my device then after installing my camera is just plain black and doesnt show any picture.
problem solved!
- i installed Resco Registry Explorer and .NET compact framework 3.5 on my Kaiser
- opened resco registry and searched for the .NET CF
- disabled .NET CF 2.0 by changing value from 1 to 0
- then enable .NET CF 3.5 by changing value from 0 to 1
I had the same problem, used your link, it worked perfectly. THANKS!!!!