I have tried every forum and every article's tips on how to root and NOTHING is working. I have cupcake. I have formatted my SD card using a reader because when I try to mount it using the phone it unmounted. I installed the program onto the SD card and powered it down. I hold down the camera button and hit power. The screen with the 3 colors comes up and just stays there doing nothing. Am I just not waiting long enough for the gray screen?
PLEASE HELP!
fro0tlo0p said:
I have tried every forum and every article's tips on how to root and NOTHING is working. I have cupcake. I have formatted my SD card using a reader because when I try to mount it using the phone it unmounted. I installed the program onto the SD card and powered it down. I hold down the camera button and hit power. The screen with the 3 colors comes up and just stays there doing nothing. Am I just not waiting long enough for the gray screen?
PLEASE HELP!
Click to expand...
Click to collapse
The screen you want for flashing is the one with the exclamation mark, activated by holding down HOME + POWER, you then press alt+l to display the log or whatever. How far did you get in the process anyway, my info kinda relys on what uve given me
fro0tlo0p said:
I have tried every forum and every article's tips on how to root and NOTHING is working. I have cupcake. I have formatted my SD card using a reader because when I try to mount it using the phone it unmounted. I installed the program onto the SD card and powered it down. I hold down the camera button and hit power. The screen with the 3 colors comes up and just stays there doing nothing. Am I just not waiting long enough for the gray screen?
PLEASE HELP!
Click to expand...
Click to collapse
Oh sorry (ignore my old post) here is a good link, start from
Before We Begin on the page http://wiki.allshadow.com/index.php/G1_Root, and make sure you are on RC7 or RC9 first. You need the DREAMIMG.nbh file in the root of your memory stick
keemyb said:
Oh sorry (ignore my old post) here is a good link, start from
Before We Begin on the page http://wiki.allshadow.com/index.php/G1_Root, and make sure you are on RC7 or RC9 first. You need the DREAMIMG.nbh file in the root of your memory stick
Click to expand...
Click to collapse
Make sure your card is formatted to fat32. Make sure the file is DREAIMG.nbh and not DREAMIMG.nbh. Boot up by holding camera + power. If it doesn't boot right then redownload the DREAIMG.nbh file, could of been a bad download.
version I535 wont root or do any thin else help please. 4.4.3 kit cat yuk
I have a version Samsung galaxy S III I535 android version 4.4.3. I do not really care for Kit cat and wanted to root it like I did my girl friends. I have spent more then a month pouring over this site mostly this but others, I have tried a ton of programs with Odin, following directions to the letter. I still can not get the thing unlocked. Every program that says install with Odin fails The ones that say put it on your SD card go there but they wont install fully. hard to read fully but it says something about wrong or bad signature then more yellow letters follby more re and it quits and leave me a dead screen. So far I have gotten lucky, the only that has quite working is 4G and it does' n even show there is a router in the house so The tcpip is probably shot. Please folk Im begging for are some help my ST card runs out in two days and they are 45 dollars a piece. so hit me with the instructs, or constructive criticism. I am new to this Ive done it in a very old phone with CW on it so it was easy please from a desperate man how to get this thing to unlocked so I can rom it and put in ST card. And before anybody *****es about ST they have been great to me and mine.
Sure I went to version (worst mistake of my life except getting married,) like being married its great at the beginning then you get that first bill then it doesn't seem like a good idea for a while but after being lied to and having to pay $290.49 I gathered there crap brought it back to a version store and dumped it. The phone is mine I bought it from gur who fixes and resells phones. I have bought several phones from him both personal and to resell he does wonderful work but he is on vacation for 3 more weeks out west camping and
My phone did work great till I finger into it lol.
If some one has the time to speak English instead of android that would be even better. Please remember I am a phone retard so use small words and please oh please point me to software the will not fail while Odin is passing it to the phone, or off the sd card
Sincerely
Dan.
Sounds like you can use towelroot
http://forum.xda-developers.com/showthread.php?t=2784249
Look through this thread (page 6 and 7 seem like its been shown working)
If you have further questions ask there as they will be able to help you more than those of us watching the g1 forum
Best of luck!
Sent from my Nexus 4 using XDA Premium 4 mobile app
As we know, the Nook Color's SD slot will always take first boot priority. I'm in a situation where even booting via SD through known methods are not working.
The purpose of this thread is to:
1) Share with others who are in this similar situation, on methods which may result in the recovery of their own devices
2) Keep this discussion healthy so one day, I will be able to restore my own bricked device which I'm still striving hard to.
Click to expand...
Click to collapse
IMPORTANT: If you have a bricked device I need to emphasize on searching and reading very carefully what others have shared here in both General and in Development. This is a fundamental requirement, as with the ability to follow instructions and not panic by creating unnecessary threads. This will only make things harder to find, so thank you in advance for not doing that.
There are many useful guides out there, some of which the most helpful are:
Nook Color Restore to stock by samuelhalff
Dummies Guide to Fixing 'My Nook Won't Boot' by RileyGrant
Stock 1.1.0 Clockwork Recovery Image by brianf21
Nook 1.01 stock dd images by shad0wf0x
[RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD by thecubed
Click to expand...
Click to collapse
Anyway, in severe bricking cases where hardware is not at fault, many of the solutions to restore the NC begins with either:
1) Booting to CWR-SD via uSD
2) Booting to a rom i.e. Nookie Froyo via uSD
3) Having ADB access, if available
Till date I am not sure why the SD-loaded programs do not work for me, and here are the symptoms:
1) Without SD inserted, the standard BN splash appears, 'Welcome to the Future of Reading', then gets stuck there till powered down. Needless to say, the 8-times reset method doesn't work.
2) With SD inserted, the 'LOADING' screen will splash, then screen blacks out with device still powered on . You will know that the device is still running as you need to hold power down for around 20 secs before you're able to power it back up again. I call this the 'Black Screen of Death'.
Click to expand...
Click to collapse
To get your device up and running, try the following:
0) Do not panic. As long there's no hardware failure there will always be a solution. Look at me, thing's still a damn brick and yet here I am, still hopeful
1) Perform a search, read the useful threads created by the above members first. This thread is related only to failed SD-booting.
Once you've done that, prepare your recovery options with these in mind. The elimination process is part and parcel of problem-solving. In no particular order:
2) Sometimes, try powering on your device by connecting the USB cable from your PC or A/C source, instead of using the Power button.
3) Use only the original USB cable that came with your device.
4) Use the back USB ports of your PC, instead of the fronts as they may provide more consistent power and connection to your device. Try to avoid using USB hubs as they may not distribute the required power equally/properly.
5) Try switching to different USB ports, some may be hardware-gimped due to wear-and-tear.
6) Try to attempt the recovery on another Win, Mac or Linux computer. At least eliminate further possibilities of environmental hardware error.
7) Try charging the battery full.
8) Or, try discharging the battery completely, by leaving the device in BSOD state overnight until you get a message saying your device can't boot due to insufficient power when switched on. Once you are in this state, keep booting the device up until the screen does not appear. Then, recharge it back to full to see if the OS returns to stock (I am sceptical of this, but this was what others advised).
9) Try different SD cards. The device could be picky. Variety should be by class-type, brand, SDHC or non-SDHC. It's been discussed that faster cards perform better, as with more reknowned brands. Also, 16GB cards reportedly do not run Froyo (do read more by searching).
10) When loading anything via SD (CWR, roms), try different button combinations i.e. power + n + up, power + n, etc.
11) And/or, hold power for various timed-presses i.e. >30 / 45 / 60 seconds. Some members report CWR booting up after these periods, or even longer.
Note: funnily I tried holding power + n + up for > 60 seconds and the 'LOADING' screen just stays frozen. Still doesn't work, and I didn't get any ADB access.
12) Try formatting the card completely with native Win/Linux tools, EASEUS Partition Master or SDFormatter before each burn.
13) Try using both Win32DiskImager and WinImage, or dd-ing in Linux (search for more instructions). If you have Linux, you can check to see if the SD's /boot partition is indeed bootable or not.
14) For ADB access, try to unregister your hardware (go to Start > Run > devmgmt.msc), then unplug-replug device to have your PC detect it again. If a device with VID of 2080 shows up, that's the NC. You should know what this means, by now. If not, read more here.
15) Try different SD card readers, especially when experiencing failure on multiple computers. As opposed to multi-adapters i.e. 6-in-1s, try dedicated microSD readers like this one. Do not use those microSD-to-normalSD converters (usually packed together in the same shipping plastic as your card) just because you only have a reader that reads regular SD cards, they tend to fail a lot.
16) At your own risk, try cleaning the contact points on your SD cards (if you must, use cleaning alcohol and a cottom swap/q-tip - do not use water), to free them of dirt and invisible grime. If you have multiple SDs, try cleaning the least expensive ones first. Don't forget to leave them to dry completely before insertion into the NC. Credit to bonobomidwest, read his experience here.
Click to expand...
Click to collapse
17) Use Nooter 0.2 (recommendation from thecubed):
Here's my recommendation: use the stock charger cable (the one with the light-up N in it) when you try Nooter 0.2.
If the light goes from orange to green (or something like that) that means Nooter is booted and working.
My new thought: some file in /rom is missing, which controls the backlight and lcd controller. I can't prove this, but it seems logical haha.
All you need to do is get Nooter 0.2 booted and ssh'd in and you'll be able to dd over a complete 1.0.1 backup.
rawfish: I use Ubuntu, so sorry if I'm not able to provide instructions for Windows
Type:
Code:
sudo ifconfig usb0 192.168.2.1
Then:
Code:
ssh [email protected]
And you should be able to follow the directions for restoring on the wiki... either that or check around on IRC, if you tell them that you've got ssh access and you just need to restore your device, they'll help you out if I'm not around..
rawfish: I typed 'dmesg' in shell to see if the NC connected as a usb-ethernet device, and it doesn't show. If it does for you, then you should have progress and should ask around in IRC.
Click to expand...
Click to collapse
All these did not work for me, but hope this is useful to some. I've read testimonies from everyone that this is an unbrickable device, and I certainly hope it's true, and for a kind soul to help suggest more solutions. As I'm overseas, do you think I should call BN up to see if I can arrange to send my device back for fixing/replacement? It's been a month since purchase, and 3 weeks of failed restore attempts.
Disclaimer: I am not responsible if any of these methods get you in deeper trouble. Attempt at your own risk. Credit goes to thecube aka IOMonster, and the #nookcolor channel on irc.freenode.net. Thank you to everyone who created the recovery guides too.
This space reserved.
You sure you just don't have crap or badly burned SD cards? Sounds pretty much what happens if you boot s really slow/junk SD or burn it badly.
khaytsus said:
You sure you just don't have crap or badly burned SD cards? Sounds pretty much what happens if you boot s really slow/junk SD or burn it badly.
Click to expand...
Click to collapse
I tried on 6 different SD cards:
1. Transcend 8GB Class 6
2. Transcend 4GB Class 2
3. Wintec 16GB Class 10
4. Sandisk 4GB Class 4
5. Sandisk 2GB non-SDHC
6. Sandisk 256MB
I've burned stuffs like Autonooter and Honeycomb on these before, and they worked fine.
rawfish said:
I tried on 6 different SD cards:
1. Transcend 8GB Class 6
2. Transcend 4GB Class 2
3. Wintec 16GB Class 10
4. Sandisk 4GB Class 4
5. Sandisk 2GB non-SDHC
6. Sandisk 256MB
I've burned stuffs like Autonooter and Honeycomb on these before, and they worked fine.
Click to expand...
Click to collapse
First of all - great job in pulling all the resources into one place (it's small consolation, but i think you've just helped a whole load of people )
Second, i apologise if I'm telling you stuff that's obvious, but in helping out on these forums often it's the LOGIC of troubleshooting rather than the particulars of the problem that are important... In other words, only vary one thing at a time, and ALWAYS swap out every piece of hardware involved at each stage... if you always rely on one piece of hardware this might be the weak link... so have you tried a different SD drive or adapter? and have you tried burning from a different computer?
Now, I'm not being insulting, because I had a virtually identical problem with my first froyo - it just wouldn't boot (as you describe) despite multiple burns, different cards, all of the standard formatting tricks etc. It wouldn't work in multiple computers - the common element being the SD/microSD adapter. It never occurred to me that such an electrically simple part could be at fault, but you bet it was - in fact i would say in my experience these things consistently fail! (I spent a day kickign myself, because we know ho unreliable they are from using them in other devices). They also all look alike so it's hard to keep track of which one you are dealing with They also fail unexpectedly, so if you used an adapter before there's no guarantee it's working now...
Sooo... Have you tried a dedicated microSD reader (rather than a simple adapter)? I now carry one with me everywhere (it doubles as the world's smallest thumb drive too)
http://www.amazon.com/gp/product/B002HGFKR8
Also bear in mind that froyo appears not to work on 16gb cards (i see you tried one)
Also, from my experience with other devices these cards are very sensitive to dirt and oil on the contacts. Certainly with enough frustrated handling you can get enough finger-grease on them to have them fail. Also they seem to be much less tolerant when writing than reading. I have NO idea how you would go about cleaning out the slot in the NC (and as someone who has ruined at least one DVD drive by blowing canned air where you shouldn't I'm not going to advocate for that). I have resurrected 'dead' SD cards before by cleaning the contacts with rubbing alcohol and a q-tip (on the card's contacts) - but again do so with great care (at your own risk!!!) and with your cheapest card, and make sure it si completely dry before you put it in the NC.
I have been generally a little scared that all this plugging and unplugging of the microSD might hurt the NC, so i have done everything i can to avoid that...
I am sure you can find someone local to you willing to help fix your boot issue but I assure you, its damn near impossible to brick a nook without physical damage.
@bonobomidwest:
No offence taken at all, in fact I am very appreciative of your contribution. I forgot to add the fact that I tried on 2 different card readers, plus indeed tried to clean the slot via an air duster VERY GENTLY as a last effort resort (I would not recommend this, it may cause permanent hardware damage). Once I'm free I'll go get a new SD reader (reads uSD only) and a new uSD which I haven't tried before. I'll try cleaning the contact points too.
*Thanks - I've added more checklists to the OP
@combustiblemonkey:
Thanks for the assurance.
I convinced my friend to buy a nook, rooted it for him, and was bricked within 2 days. Here is how I fixed it
EDIT: I tried to post a link, but was unable. If you go to theunlockr(dot)com and search for how to restore nook color to stock, there is a detailed article.
This took me almost 2 days of reboots, black screens, and freezing. I would get into CWR, and it would freeze. Had to reboot, got the black screen of death. Literally, a couple hundred reboots before it said that the OS has successfully installed, and of course, it froze again. Many more reboots, and it was finally at stock. I figure getting it back to stock was enough to return it.
Dr-Rockso said:
I convinced my friend to buy a nook, rooted it for him, and was bricked within 2 days. Here is how I fixed it
EDIT: I tried to post a link, but was unable. If you go to theunlockr(dot)com and search for how to restore nook color to stock, there is a detailed article.
This took me almost 2 days of reboots, black screens, and freezing. I would get into CWR, and it would freeze. Had to reboot, got the black screen of death. Literally, a couple hundred reboots before it said that the OS has successfully installed, and of course, it froze again. Many more reboots, and it was finally at stock. I figure getting it back to stock was enough to return it.
Click to expand...
Click to collapse
Thanks, this is the direct link:
http://theunlockr.com/2011/02/14/how-to-restore-the-nook-color-to-stock
All instructions were taken from XDA, plus no guarantee it's the most updated
Moving on, great to hear you've gotten it back to stock. Man, you've got GREAT patience, a couple hundred reboots?
1) Was the SD inserted in or not? Curious about the OS successfully installed message, which is the result of 8x unsuccessful reboots without SD inserted.
2) Could you also provide a more detailed account on what you did? Looking forward to hear - thanks.
Hi rawfish
I also have this issue and have been trying many things. My nook did boot nooter 0.2 (the light went green) but I couldn't get Win 7 or Ubuntu to connect to it. My screen never changes at all, no backlight even. Seems this may be a larger issue than most believe it to be, especially for people like us who don't live in the US.
chrysilis said:
Hi rawfish
I also have this issue and have been trying many things. My nook did boot nooter 0.2 (the light went green) but I couldn't get Win 7 or Ubuntu to connect to it. My screen never changes at all, no backlight even. Seems this may be a larger issue than most believe it to be, especially for people like us who don't live in the US.
Click to expand...
Click to collapse
If you can find a friend or person in your area having the same device, you can try to see if an SD you burned work on theirs. If it works on theirs, it's possible that your SD slot is defective - but then comes the question of it being in working condition before the bricking happened, right?
I still think mine's recoverable, as with yours. Could be a bad SD or reader, or bad contacts. I'm going to try out using another reader plus purchase an el-cheapo branded SD. I'm also going to try formatting it via another PC in a linux environment and messing around with the partitions.
I understand the trouble you may have taken to get the device - and this happens. All the best mate, and do cheer up, don't give up.
rawfish said:
Thanks, this is the direct link:
All instructions were taken from XDA, plus no guarantee it's the most updated
Moving on, great to hear you've gotten it back to stock. Man, you've got GREAT patience, a couple hundred reboots?
1) Was the SD inserted in or not? Curious about the OS successfully installed message, which is the result of 8x unsuccessful reboots without SD inserted.
2) Could you also provide a more detailed account on what you did? Looking forward to hear - thanks.
Click to expand...
Click to collapse
When I finally got it to work, the SD card was installed with the 1.0.1 stock OS on it, and CWR. The problem was that that (+) and (-) would only occasionally work. And if they did, it would usually freeze. I would be able to format system, but it would freeze if I tried to format data. Powered off, and I would get the black screen of death (BSoD). Once this happened, I would plug it into my computer so that I could hear the chime indicating a new device was plugged in. I found that ejecting the SD and then rebooting would sometimes help get rid of the BSoD. Then another power down, plug in the SD, and start again. Also, holding the N, +, and Power would sometimes help in launching CWR. I would usually have to hold for 60 seconds, but it would finally launch. It seemed like the nook was trying to run a process that slowing it down and causing it to freeze, but I couldn't figure out what it was. If I would wait an hour, it would boot CWR and allow me to format system and data, but then it would freeze when I would try to install the zip.
The successful install message was in CWR. It said Install From SD Card Complete, or something like that. After that, I still had to do the 8 reboots. It would load up the stock welcome screen and freeze. 8 reboots later, I got the video lady. Good enough to return it to the store.
It really was just persistence. It would usually take an hour of reboots before I was able to try to install the zip, and it probably failed on me 15+ times. The status bar would get half way, and freeze. Then I had to begin again. If it had been my nook instead of my friends, I probably would have given up. I wish I could be more specific, but unfortunately I am new to all of this. My nook rooted just fine, and fixing his is really my only experience with CWR. I just kept going until it worked.
Good luck! It is a pain in the ass, but it can happen.
rawfish said:
If you can find a friend or person in your area having the same device, you can try to see if an SD you burned work on theirs. If it works on theirs, it's possible that your SD slot is defective - but then comes the question of it being in working condition before the bricking happened, right?
I still think mine's recoverable, as with yours. Could be a bad SD or reader, or bad contacts. I'm going to try out using another reader plus purchase an el-cheapo branded SD. I'm also going to try formatting it via another PC in a linux environment and messing around with the partitions.
I understand the trouble you may have taken to get the device - and this happens. All the best mate, and do cheer up, don't give up.
Click to expand...
Click to collapse
My wife has one as well so am able to test using that and the SD works fine in hers. The whole screen not turning on thing is weird though, does your screen turn on?
We bought them when on honeymoon in America so didn't have to pay a shipper or anything
Deleting the partitions manually with Gparted and using dd to burn the SDs and making sure the correct partitions are bootable doesn't seem to work. Last night I retried a lot of the previously attempted options, with no results.
It's weird to think that a working SD slot and a slew of cards will suddenly malfunction, but for now that seems like the most plausible reason why my NC can't boot anything off SD.
To think back how it all started, the device suddenly rebooted from HC preview v0.4 to stock BN 1.01 (rooted + installed CWR on eMMC) while the SD is inserted, then upon another reboot it simply stays dead, this gives me reason to believe that the internal boot partition is corrupted, and SD slot nuked hardware-wise.
Hmmm, really hoping to find someone else who has the same device, in my area.
Right now I am at the Black Screen of Death as well...
I think Barnes should refund me, but I am willing to do some tests for the good of society.
Steelfan555 said:
Right now I am at the Black Screen of Death as well...
I think Barnes should refund me, but I am willing to do some tests for the good of society.
Click to expand...
Click to collapse
Sorry to hear that, and don't give up! Hope you took a look at the other threads, and this little pseudo checklist I made in the OP. Do share the outcome
Thank you Rawfish. The first option, the Dummies Guide to Fixing 'My Nook won't boot'
was what I needed to get started on the right track again. Though I'm not sure anyone wants to know how I ended up here, I'm grateful to those that put in the time and effort to find any of these solutions.
Thank you!
FroztIkon said:
Thank you Rawfish. The first option, the Dummies Guide to Fixing 'My Nook won't boot'
was what I needed to get started on the right track again. Though I'm not sure anyone wants to know how I ended up here, I'm grateful to those that put in the time and effort to find any of these solutions.
Thank you!
Click to expand...
Click to collapse
Update:
Ok, so after running through it, I ended up getting stuck on the boot screen that shows N. If I powered off, it would restart and get stuck at that screen. I tried the 8 shutdowns (it installed new software), but afterwards, it was still stuck. So, I tried another method I found on the forums. I powered off holding the N button and power, which caused it to boot back up and do a factory reset. I now have a factory fresh Nook.
Okay, it's been a while since I kept this thread updated - I contacted BN and had the device sent back, apparently the SD slot failed so they sent me a new one. I'm just wondering if it's sheer concidence that it happened, as I was tinkering with Nookie Honey preview v0.4, when the hardware suddenly failed.
Oh well, I guess the NC still remains as a 99.99% unbrickable device - with the 0.01% being related to the ambiguous root cause to my case.
I now have 2 NCs (one from the RMA process, another one from the $199 eBay deal.
When i restart my ace, i always got same issue Error DF XX. I don't know what is it? When i make photo my phone tell me : your SD card is full.
I have space on it, i have ext partition and have space on ext and fat partition, but my internal space have 0,00 MB.
Is this thing connected?
I'm now using http://forum.xda-developers.com/showthread.php?t=2140510
screen
pic
Two things. I googled the error, and it seems its an error with iOS devices
Second, it seems like a problem with paid app(s) that you may have.
yes i see in iOS but i have android
For now i found solution for Camera, i buy bigger SD card and for now all works fine!
Tnx mate! It's anoying, this isnt hard to push ok or cancel, just i wondering if have some influence to rom (speed, stabilty...)
prlek86 said:
yes i see in iOS but i have android
For now i found solution for Camera, i buy bigger SD card and for now all works fine!
Tnx mate! It's anoying, this isnt hard to push ok or cancel, just i wondering if have some influence to rom (speed, stabilty...)
Click to expand...
Click to collapse
And no, AFAIK, it wont cause any performance effects