Database Develop

Removing system status dialog/touchflow 3d interface?

hi all!
just got myself a diamond yesterday after spending 8 months with a n95 8gb... overall impressive phone but coming from a dopod d810, i find the system status dialog/touchflow 3d interface extremely annoying!
how do i remove them???
system status dialog -> where you can click on the volume, date, 3G icons on the top right hand side of the phone
also anybody knows how to remove the functionality where you press the vol up/down and it changes the system volume?

Hard Reset the daimond. When it boots up after configuration and when it says 3 seconds to customize , press reset.
PS : Opera also wont be installed. you can download opera cab seperately

If it's just the interface, why not uncheck it from Settings>Today ? Or does it come back? Not tried it yet myself

jeRrRKKKK said:
system status dialog -> where you can click on the volume, date, 3G icons on the top right hand side of the phone
Click to expand...
Click to collapse
start->preferences->system->TouchFLo
unselect third checkbox..

Allright .. that´t the way to disable TouchFlo...
but how can we get rid of the system status dialog?
(another way than soft reset before HTC customizing runs...)
thx alot...

one more here that is really seeking to get rid of that awfull system status.....
thats the only thing so far i really hated on the diamond

Doesn't my solution (3 posts up from here) work to disable the system status dialog window?
It works for me (MDA Compact IV -Dutch)

yes it works real fine, the problem is everyone still wants the touchflow 3d
we just want to get rid of the system status on the upper corner

Guys..
instead of the full screen system status, do U think I can get the original Touch/Cruise system bubble instead? It's similar to the full screen, but the icons are slightly bigger and appears on top of the screen in a bubble.
Any ideas?

I also find the system status page an unnecessary step. Coming from an Imate K-jam, I preffered just pressing on the icon at the top (alarm bell / envelope / handset etc) to take me to the pop-up bubble at the bottom of the screen where I could either enter open the inbox / call register/calender etc or dismiss.
I read somewhere that the system status page is to bring up large icons for finger pressing. I don't understand the logic of this as the only way I bring up the system status page is by pressing on a small icon in the title bar!
I would like to be able to remove this system status screen step

Why does everone ignores the answer already given??
* To disable the Systemstatus screen, go to Settings>System>Touchflo
* untick the third checkbox wich states (translated from Dutch): "Show Systemstatuswindow when ticked on statusicons"

wheelo said:
...I read somewhere that the system status page is to bring up large icons for finger pressing. I don't understand the logic of this as the only way I bring up the system status page is by pressing on a small icon in the title bar!...
Click to expand...
Click to collapse
The idea is that you don't have to aim so precise, just press anywhere near the icons and then you can take your pick by pressing an easy target.
Anyway I do agree with you that it is an annoying extra step, it is a good thing it can be disabled (see previous post).

hi
any idea why my elf does not have 3 options but only 1 "enable sound when finger scrolling and panning"
Is there any workaround to turn off the touchflow?
maybe it's because I was flashed the rom to an "original orange" version?
thanks

tshuma said:
hi
any idea why my elf does not have 3 options but only 1 "enable sound when finger scrolling and panning"
Is there any workaround to turn off the touchflow?
maybe it's because I was flashed the rom to an "original orange" version?
thanks
Click to expand...
Click to collapse
Same here, but I found this registry key that helped me (i really hate the big system status menu!) :
HKEY_LOCAL_MACHINE\Software\HTC\EnlargeTitleBar\Enable which must be 0 to disable it! You don't even need to reboot, works instant!

Ever since I updated the ROM, I really hate that big system status screen.
I thought I would have had to live with it, so I am very glad to found this thread.
Thanks guys!!!

rondol1 said:
Why does everone ignores the answer already given??
* To disable the Systemstatus screen, go to Settings>System>Touchflo
* untick the third checkbox wich states (translated from Dutch): "Show Systemstatuswindow when ticked on statusicons"
Click to expand...
Click to collapse
LoL,
I read your first message and BAM! It worked!!! (last of 3 check boxes)
THANNNNNNNNNNNNNNNK UUUUUUUUUU
(I have a cooked rom for my Tilt/Kaiser)

Start|Settings|System|Touchflo| uncheck "Show System Status screen when status icons are tapped"
Start|Settings|Personal|Today|Items| uncheck "TouchFLO 3D"

Settings > System > Touchflo > untick Show system status....
EDIT: oops, didn't see the 2nd page.

i need help :/
sorry this doesnt really relate to the other posts i dont know how to post a message on my on. (just registered today)
But does anyone know how to change the clock on the title bar on the top of the HTC Touch Pro from a clock icon to the normal digital clock. i somehow changed it while on the phone and i just CANT figure out how to change it back.
If anyone can please help me i would reallyyyy appreciate it!

Icon of number "1" in the taskbar without any function connected to it

Hi,
when I turn off bluetooth, instead of the bluetooth icon a symbol of number "1" is shown in the taskbar without any function connected to it.
On my homescreen: 1 - 3G - Signalquality - Audio - Battery
On my dialerscreen: 1 - 3G - Signalquality - Audio
So there is always one icon more (1) in the taskbar, than functions to change when I klick on it.
Does anyone know how to get rid of this useless number 1 icon?

Maybe it is the ALS (Alternate Line Service).
Maybe your provider is able to offer you a second phone line.
A screenshot would be helpful.

Yes, I can switch between Line 1 and 2 (ALS) and the icon is changing then from 1 to 2.
But I havn´t seen this special icon in any screenshot of the taskbar in this forum yet.

Hi guys. I've been searching to get rid of the number "1" from my diamond too.
My carrier supports ALS (Alternate Line Service) but I don't use.
I want ot get rid of the number 1. There is a screenshot so you can see.
Please help!
Thanks

Line 1 icon remove
Just try the following: go to HKLM\Drivers\BuiltIN\RIL\ALSService and change the value from 1 to 0.
Icon in the upper bar will disappear, but after a soft reset it´s there again.
Does anybody have permanent solution?

So, anyone find a way to make it permanent?

Guys, looks like the only way to turn it off is really to change:
HKLM\Drivers\BuiltIn\RIL\ALSService to 0.
I've created a simple utility that makes such change on startup:
http://rapidshare.com/files/276006867/AlsStopperSetup.CAB
For me it works perfect, enjoy if you like it!

Bhmn said:
I've created a simple utility that makes such change on startup:
http://rapidshare.com/files/276006867/AlsStopperSetup.CAB
For me it works perfect, enjoy if you like it!
Click to expand...
Click to collapse
Hi! I tried to download it, but rapidshare says the file is not available. Is there another way to download it? Thanks!

How To Remove 1 Line Status Taskbar - Solved
rpk-br said:
Hi! I tried to download it, but rapidshare says the file is not available. Is there another way to download it? Thanks!
Click to expand...
Click to collapse
In the registry: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] > "ALSService"=dword:00000001 and changing dword to 0 removes "Line 1" but a reboot sets it back to default so... you can find a permanent fix to remove the Line 1 from the taskbar here: http://forum.xda-developers.com/showpost.php?p=10877507&postcount=32606

Notification Manager - Screen settings ?

I have a problem that my phone pops up notifications - but they are blank.
The phone is a Kaiser/TyTnII ( Used to be Vodafone 1615 )
I am pretty sure that this phone has been flashed with one of the XDA ROMs as i have just done a hard reset and i still have touchFlo and a bunch of other non standard looking utilities on the phone.
The about box for TouchFlo says version 1.0 ( Build 1818.3719 ) which i am pretty sure having read all about the touchflo project for the Kaiser on the XDA developers is a version created here.
So now that i have given some background, back to the problem... pretty much everything on the phone seems to work ok. But the really annoying bug is this notification pop up.
eg. Set a calendar appointment for a few minutes in the future, set a reminder.
.... few minutes passes ... notification pops up
whole screen dims and at the bottom i get the soft buttons of "dismiss" and "menu"
No actual message is displayed on the screen.
Now i flip to landscape mode, and i can see the top left hand corner of a pop up message - the rest dissapears off the screen.
So, what have i done so far to help myself ?
1) searched these forums for somebody having the same problem/question X
2) tried some registry tweaks for specifying what message should pop up X
3) renaming the notification manager.dll X
4) looking at all the notification *.png screen images in the /windows/
folder and confirming that they are correctly set for the QVGA screen size. X
5) tried downloading the notification manager.cab for the rhodium - elsewhere on the XDA site. - would not install
6) hard reset the phone.
I dont actually want the touchflo as i prefer the spb mobile shell. What options do i have ?
Do i need to just apply the correct registry tweaks and all will be well ?
Do i download a new notification manager from somewhere that will fix this?
Do i have to re-flash the phone ? ( least attractive option to me )
Can i somehow uninstall the notification manager and go back to a windows
default version ?
thanks, you_were_lucky

Notification Manager - pop up window size ?
So some developments since my post yesterday, I tried some registry tweaks to change the font sizes.
I notice that if i tap the title bar ( next to the wifi icon) i get the notification manager screen up - this has all the correctly sized and formatted .png images and functions correctly.
It is the pop up that appears due to a calendar reminder or a wireless network found etc. that is all wrong
When i go into landscape i can see the edge of this and even click on the wireless network found radio buttons etc.
So i figure that maybe the pop up window sizes are all wrong due to some mad font size someplace. I went into the registry and tried changing font sizes down from 800 to 12 and this did indeed change the size of most fonts kicking arround the place. Unfortunately it did not influence the size of the pop up box.
Any ideas people ?
thanks YWL

Flashing LED for Missed Call

Greetings All,
I've been reading and using tweaks from XDA for a while now, and after tinkering with Windows Phone I think I've finally found something i can contribute.
I've managed to get my HTC HD7 to give a Flashing Green LED for a missed call using old Windows Mobile 5 tricks.
By navigating to:
HKCU\ControlPanel\Sounds\RingTone0\
Adding a string value called:
Script
And giving it the values:
av2pf300
To break this down it does the following:
a = Activate Phone
v2 = Vibrate for 2 seconds
p = Play Ringtone
f300 = Flashing LED for missed call for 5 minutes
These are the values that i've chosen for myself. It makes the phone vibrate for 2 seconds before the ringtone kicks in.
I haven't found a way to keep the phone vibrating while it is also ringing, but I find having the flashing LED more of a benefit to me as I'm constantly in and out of my office.
The script value is fully customizable, and more values can be found here:
http://forum.xda-developers.com/archive/index.php/t-270040.html
I hope other people find this as useful as I have.
Estens.

have you attempted this with sms or email? neither of the two are supported with led notification by default but maybe a script can force that. Also, is there a way you can control the color of the led? thanks for your contribution!

SMS and email were handled differently by Windows Mobile 5 & 6.
You would go to HKEY_CURRENT_USER\ControlPanel\Notifications\Default\Options and set the default value to one of the following:
* 0 – Show icon
* 1 – Show icon and play notification sound
* 2 – Show icon and vibration
* 3 – Show icon and vibration and play notification sound
* 4 – Same as 0
* 5 – Same as 1
* 6 – Same as 3
* 7 – Same as 3
* 8 – Show icon and notification bubble
* 9 – Show icon and play notification sound and show notification bubble
* 10 – Show icon and notification bubble and vibration
* 11 – Show icon and play notification sound and show notification bubble and vibration
* 13 – Same as 1
This functionality appears to have changed in Windows Phone 7. I have tried both the above method and the Script method that i used for the Ringtone, but neither have worked.
As for changing the Colour of the LED, I wouldn't know where to begin. All I'm doing is telling the system that i want the LED to flash, not to flash green.
It may be possible, and i'll start to look into it now that someone has requested it - I assume that because the low-battery LED warning is Orange it is possible to change it, but that could be a hardware specific factor -- no idea.

Thanks for the reply. Any progress you can come up with would be great.

Doesn't it do this anyway - mine does except the flashing light is orange not green.
It would be a really good option to have it for SMS as well though

I can't see ...\RingTone0\... Please help me! Thanks!

jacky1507 said:
I can't see ...\RingTone0\... Please help me! Thanks!
Click to expand...
Click to collapse
First, are you using a HTC HD7? This is the only Windows Phone device I currently have access to so i am unsure if this will work with other devices (although the registry shouldn't change that much between devices.)
Second, are you sure your in the correct registry hive? i.e. you need to be in HKCU, not HKLM. There is a ControlPanel sub-key in both of these hives, so if your missing some keys i'd just ask you to confirm that your looking in the right place.
If the above does not work I'm not really sure how to progress... this key has been in Windows Mobile since 5.0 (as far as I know), and it's managed to find it's way into the Registry of my Windows Phone 7 HTD HD7 so I'm not sure why it's not there for you.
In regards to the SMS/Email flashing notification - I've tried a few methods of tinkering but still haven't been able.
Will keep you all posted.
Estens.

estens said:
First, are you using a HTC HD7? This is the only Windows Phone device I currently have access to so i am unsure if this will work with other devices (although the registry shouldn't change that much between devices.)
Second, are you sure your in the correct registry hive? i.e. you need to be in HKCU, not HKLM. There is a ControlPanel sub-key in both of these hives, so if your missing some keys i'd just ask you to confirm that your looking in the right place.
If the above does not work I'm not really sure how to progress... this key has been in Windows Mobile since 5.0 (as far as I know), and it's managed to find it's way into the Registry of my Windows Phone 7 HTD HD7 so I'm not sure why it's not there for you.
In regards to the SMS/Email flashing notification - I've tried a few methods of tinkering but still haven't been able.
Will keep you all posted.
Estens.
Click to expand...
Click to collapse
Dear Estens,
I'm using HTC HD7 Nodo, but I haven't yet change the ringtones anymore. Is it the reason like this?
I upload the picture about this problem. Please check it and help me. Thanks!

I can see your problem straight away. Your trying to modify the registry on your desktop.
This modification is for the device, (i.e. your mobile phone).
Making changes to the registry on your desktop PC will only affect things on your desktop PC, and changing the registry on your device will only affect your device.
The HKCU\ControlPanel\Sounds\RingTone0\ registry is on your device so you'll have to dev-unlock your device, install a registry editor and modify it that way.
Estens

estens said:
I can see your problem straight away. Your trying to modify the registry on your desktop.
This modification is for the device, (i.e. your mobile phone).
Making changes to the registry on your desktop PC will only affect things on your desktop PC, and changing the registry on your device will only affect your device.
The HKCU\ControlPanel\Sounds\RingTone0\ registry is on your device so you'll have to dev-unlock your device, install a registry editor and modify it that way.
Estens
Click to expand...
Click to collapse
I know. Thanks for your help!

estens said:
Greetings All,
I've been reading and using tweaks from XDA for a while now, and after tinkering with Windows Phone I think I've finally found something i can contribute.
I've managed to get my HTC HD7 to give a Flashing Green LED for a missed call using old Windows Mobile 5 tricks.
By navigating to:
HKCU\ControlPanel\Sounds\RingTone0\
Adding a string value called:
Script
And giving it the values:
av2pf300
To break this down it does the following:
a = Activate Phone
v2 = Vibrate for 2 seconds
p = Play Ringtone
f300 = Flashing LED for missed call for 5 minutes
These are the values that i've chosen for myself. It makes the phone vibrate for 2 seconds before the ringtone kicks in.
I haven't found a way to keep the phone vibrating while it is also ringing, but I find having the flashing LED more of a benefit to me as I'm constantly in and out of my office.
The script value is fully customizable, and more values can be found here:
http://forum.xda-developers.com/archive/index.php/t-270040.html
I hope other people find this as useful as I have.
Estens.
Click to expand...
Click to collapse
----------------------------------------------------------
Cool... more neat sh** to play with... thanks man!... ... knew that touchXplorer was going to come in handy pretty quick!!...

Quick note on Mango Beta 2.
It appears that if you have this trick in place before you begin the Mango Update it will persist after the update is complete. So be sure to apply this before you update to the Mango beta if you want your flashing LED for a missed call.

Please help RGB lighting not working out of the box

Just bought as asos rog phone 2 1TB variant setup the device everything is fine but the back RGB lighting logo is not working at all tried to find the control as in websites but do not have it i even got an update and restarted the phone still nothing is there something that i have missed ?
Thank You in advance

First try to add it to quick settings of your notification bar by clickong that pen button next to the settings icon
If you couldnt find it, then try to use armory crate, in console tab scroll to the bottom and trun on system lighting
Btw after you turn it on you also need to edit its setting and check the option to light the LED up while the screen is on, otherwise as default it is OFF
Ps. Hope you'll have a great experience with the 1tb beast!