Hey guys,
For the longest time I've been on Fido with a unlocked (direct from sony X1a). I've never had any problems with it at all. Everything worked flawless.
Recently I setup a corporate plan with Rogers. Ended up getting a bunch of Xperia X1s at a discounted rate since I signed a 3 year on a swack of lines...
Anyways I got the Xperias, turns out Rogers like to charge for VPN access. I added it to all the devices.
After setting up the VPN.com apn on the new rogers (rogers firmware) Xperia X1s, I noticed that everything worked except simple web page browsing (in both browsers). No errors, just loaded completely blank pages. When changing apn back to internet.com everything worked fine.
From this behavior I went ahead and checked the config on the device, no proxies were configured anywhere.
I asked the Rogers guy, currently it's bumped up to Tier 2 support and noone knows anything, they denied any "hidden proxies".
I'm now waiting for a call back from Tier 2 to further troubleshoot the issue. While I've waiting, I went ahead and started fishing through the registry. I found a bunch of very odd registry entries pertaining to proxies...
After removing these "odd" proxy registry keys, all of a sudden I can now use web browsing without ANY issues.
Does anyone know exactly how many registry keys are affected? Isn't this a huge security hole? Who is looking at the proxy info?
I had posted about this very same matter about an year ago. No matter how much they deny hidden proxies, they are in place. Interestingly enough - they are not mandatory, but are enforced for Windows Mobile Rogers phones. After hitting the wall pretty much on everything I tried (and no responses here on XDA either), I ended up installing generic US rom (no need of HardSPL or anything), where you can bypass connection wizard and set connection settings manually (wizard is the thing that messes up things and makes VPN.com useless). On the stock Rogers rom there is no way you can bypass connection wizard.
Once you set everything manually, there is no problem whatsoever with using vpn.com except for rogers.mobi page not being able to recognize you and provide account information (not hugely important to me, at all..).
So what happens is you turn the Rogers branded X1a into unbranded X1a (like your original one) and viola - everything works (as long as you don't use connection wizard to setup the connections)
thanks for the response!
After removing those 4 registry keys it's working like a charm!
So I don't need to HardSPL the phone to install the latest X1a US rom? I do alot of crazy stuff with WM phones, but I never eff with the hardware (as I usually always buy unlocked phones).
By the way, with the auto-config, if you go into settings, then connections, and goto the auto-config program, the "menu" on the bottom right you can hit, and then uncheck "Enable auto config" and it stops it from populating the typical rogers settings on every boot.
I used it to configure MMS, and internet, then disable auto-config (left the existing settings), changed the apn from internet.com to vpn.com then removed the registry settings mentioned above, and all is good
I still am thinking about maybe going to the generic firmware though as it is slightly a newer version. Anyone know any differences?
One thing I want to mention is the interwebz (spelling is a joke) is WAY effin faster using rogers phone on rogers network. Fido was HORRIBLE compared to this.
Just curious, how would you install the Generic US firmware WITHOUT SPL?
Thanks
Stephen
bump bump!
hey i was just wondering, seeing that you have the Xperia x1 unlocked on Fido. Since Rogers Wireless owns Fido wouldn't that mean if i buy the Xperia x1 right now i can use it on fido without needing to unlock it?
DarkPotato said:
hey i was just wondering, seeing that you have the Xperia x1 unlocked on Fido. Since Rogers Wireless owns Fido wouldn't that mean if i buy the Xperia x1 right now i can use it on fido without needing to unlock it?
Click to expand...
Click to collapse
Way way back after the acquisition I think I heard they would offer unlock codes if you switched, but I don't think that's the case anymore.
Even though they are owned by same company, they are still separate networks...
Zhariak said:
Just curious, how would you install the Generic US firmware WITHOUT SPL?
Thanks
Stephen
Click to expand...
Click to collapse
you should be able to flash any stock rom when you are on stock spl, either via customruu or sd
never tried it but can't think of anything to hinder doing it
best
Related
I'm not sure what it is, but for some reason some of the programs are not connecting to the internet on my tilt. i'm running the q-mobile tilt rom, and the only thing that is connecting to the medianet is palringo. i can't access the new w/ windows live or internet explorer. any idea what it could be?
no ideas from anyone...i know they're a boat load of phone-tech savy people here, someone has to have some kind of idea?
simbadogg said:
no ideas from anyone...i know they're a boat load of phone-tech savy people here, someone has to have some kind of idea?
Click to expand...
Click to collapse
Hi dude
more info plz!! I didn't well undertand your problem!
Are you trying to connect by your Pravider Data Connection (GPRS/HSDPA) or by WiFi??!!
sorry, i guess i didn't say that. i did say medianet, but i sure have been a little more concise. but yes, i'm trying to connect through att wireless medianet. the weird thing is, i am connected because i am able to go online with palringo and talk w/ contacts on aim, but IE doesn't work, windows live doesn't work either. i went through and changed some of the settings in media net per attwireless support forum, i'm looking for the proxy cab to download as it isn't on my phone, this could be the fix for it...but i highly doubt it because the internet was working on my phone just fine for the first week or so after i installed my ROM. now it just wont connect anymore, and i know i didn't do anything except uninstall solitaire and a few other games
ok...not much progress, but i guess this is a start. instead of getting an error message when i try to open a page w/ IE, in the status bar it says "Locating..." "Opening...", "0 Kb"...then it just stops, and nothing loads up. I'm stumped
simbadogg said:
sorry, i guess i didn't say that. i did say medianet, but i sure have been a little more concise. but yes, i'm trying to connect through att wireless medianet. the weird thing is, i am connected because i am able to go online with palringo and talk w/ contacts on aim, but IE doesn't work, windows live doesn't work either. i went through and changed some of the settings in media net per attwireless support forum, i'm looking for the proxy cab to download as it isn't on my phone, this could be the fix for it...but i highly doubt it because the internet was working on my phone just fine for the first week or so after i installed my ROM. now it just wont connect anymore, and i know i didn't do anything except uninstall solitaire and a few other games
Click to expand...
Click to collapse
First of all sorry, but i'm not American, so correct me if i'm wrong: "ATT Wireless" is your Phone Provider, right? and you are trying to connect to internet using the Provider Data Connection and not Wi-Fi, e.g. through your home router (Wi-Fi = Wireless but not "ATT Wireless", names coincidence!!! ), right? if this is correct, you didn't answer me to the above-mentioned question (using Provider Data or Wi-Fi??)!!
So try to set this Windows options:
Settings -> Connections Tab -> Connections -> Advanced Tab -> Networks Selection -> than select in the two options your Internet Provider service, more ,if you need, under the both tweak keys you can edit it, like proxy settings!
Hope to well undertand your problem!
Umm...i did answer your question, i did say it was attwireless. I'm guessing you're not familiar with NA cell phone providers, which i'm sorry we missed, but i did answer the question. No need for the rolling of eyes. But yes, as i said in some posts earlier, i did change those settings already as per the attwireless support forum on their website. But its still not working.
simbadogg said:
Umm...i did answer your question, i did say it was attwireless. I'm guessing you're not familiar with NA cell phone providers, which i'm sorry we missed, but i did answer the question. No need for the rolling of eyes. But yes, as i said in some posts earlier, i did change those settings already as per the attwireless support forum on their website. But its still not working.
Click to expand...
Click to collapse
...ok, we misunderstanding, or better,i didn't well understand you!
However give a look here , maybe it helps you!
Ciao
its ok, no problem at all. thanx for the link but that didnt' work either.i really dont know whats going on with my phone, the internet worked flawlessly for the first 2 weeks i had my phone, then it just stopped working yesterday. well, it stopped working for every other program except for palringo, and i'm almost certain that it is not sms based, so i dont understand why that would work, and not other programs.
UPDATE:
ok, so i tried using the media new gprs connection with my 8125, same situation. i'm not sure what on earth it could be, but w/e it is, i can use palingro and aim pocket pc on my tilt, but i just can't get any data from web or anything else. go figure. i think i'm just gonna let give it up for the day, i've been working on it for 8 hours. maybe take a look at it again this weekend, i dont HAVE to have the net until monday, but even then i can still use wifi until i get this sorted out.
ok, so it looks like just about everything is working now on my phone except internet explorer while connected to the AT&T wireless EDGE/3G connection. I can download the maps while connected to Windows Live GPS, i'm able to sign on and chat while using agile messenger, i can download emails on the go with my outlook mailbox.
The only thing that is giving me a problem still is internet explorer/opera mobile. Anytime i type in a page it says "locating...", "opening..." "0 KB" while using IE then it just stops there and doesn't load a thing, and when using opera is says no connection detected. Anybody know what this could be? I dont see anywhere in IE or opera where you can change browser settings as far as connectivity...
very similar problem
Hi,
I'm having a very similar problem. I have an HTC TYTN II unlocked. It has worked beautifully for a couple of months and suddenly PIE would not work. It says Connecting...Locating...Opening and then hangs in there for a while until it error outs with "the connection has been lost"
I'm on T-Mobile full internet plan. The ROM is original stock ROM (UK). Curiously, the "push" emails continues to work, but PIE does not. I can't login to Live messenger either.
I have reset the phone to factory settings to no avail. I have called T-Mobile and they say my account is okay.
Any idea? This is really weird.
Any help would be greatly appreciated.
elkavayo, where are you located? I am having the same problem today & I am in south florida. I just got off the phone with a T-Mobile tech & he tried something and said it appeared to be a network problem - not a phone issue. Wi-fi is working fine.
weebo523
I'm located in South Florida too, Miami to be precise. Those were my thoughts initially, but I called T-Mobile and they told me that there were no outages or network problems. This has been happening to me since Wednesday 8:00 AM.
Additionally, I swap SIMs with a friend, who also have T-Mobile, and configured his phone (HTC Touch unlocked) to use T-Mo full internet and it worked on his phone with my account!
My wide and daughter (Dash and T-Mo SDA) can also connect to thye net normally with their phones, so I don't think it is the service. Mine doesn't work with neither full nor T-zones. It does work with Wi-Fi though.
The mystery continues... thanksfor sharing your story. Hopefully we'll find a "cure" soon. I've beenthinking about "upgrading" to 6.1.....
i have the same problem with an unlocked Tilt running on my Rogers network.
all my messaging apps work but not Internet Explorer.
I'm in Fort Lauderdale and just had the same problem .. I have TWO 8525's (TyTn) on T-Mobile and also a Wing with T-Mobile, whats weird, is that both 8525's are having the problem, whereas the Wing is working fine.
There is definately an issue right now with South Florida and t-mobile.
elkavayo & vr24, this is strange. It seems to be happening exclusively to the Tilt / TyTn & in South Florida with one Rogers. And it seems like very few of us have the problem. I am usually pretty good at trouble shooting but this has me stumped.
totally, I have tried tons of settings, everything I can come up with, used their Data Configurator, I've tried 3 different ROMs, including Win Mo 6.1, and even on the TyTn forum, people with the 8525 in other parts of the country aren't having the issue.
It's really messed up, and as I said, my Wing works fine, lol... but I want my TyTn as the wing is having other malfunctions. the only problem is, how can you argue it's the network when one phone works and the other doesn't. there is SOMETHING that changed on the network though that is not accepting something with the tytn, in just our area, lol.. obviously. Just no idea what it is.
vr24 - at least you saved me the trouble of trying different ROMs, which I was just about to do I did try going to a backup with no luck. Do you think that something could have gone bad in the phone that connects us through GPRS?
I guess I will have to sleep on this for now. Hope you or someone figures this out while I'm sleeping - VBG
Lol... don't count on me too much to figure this one out. It's quite the nightmare really. And it's a shame. I just purchased my 2 Hermes and was thrilled to have them and they were working, now I have very expensive bricks basically!!!
Anyways, help would be awesome to anyone out there willing to continue troubleshooting this.
Well I have some "good" news... I'll be heading from Fort Lauderdale to Los Angeles this coming Wednesday, if we don't get it sorted out by then, and this magically works on the West Coast, I'm jam t-mobiles balls into a vice grip until they fix it. I'm REAL curious to see if it makes any difference.
I'm currently using a TyTn II in Canada, with Rogers internet.com settings.
Now everything was working fine (browsing, IM, push email, etc) up to 2 days ago. Now when I run Internet explorer or Opera, it only loads google and nothing else. It's stuck on rendering/even loading the page. Yet, push email, palringo, weather all still work. Any idea's as what it could be?
I know it's not a proxy problem as I have it disabled, I've tried hard resetting, new radio, different SPL, different rom, everything, checked older threads and still nothing found.
Please help! (Also, Windows Live Messenger doesn't work either). Thanks
chaosblack said:
I'm currently using a TyTn II in Canada, with Rogers internet.com settings.
Now everything was working fine (browsing, IM, push email, etc) up to 2 days ago. Now when I run Internet explorer or Opera, it only loads google and nothing else. It's stuck on rendering/even loading the page. Yet, push email, palringo, weather all still work. Any idea's as what it could be?
I know it's not a proxy problem as I have it disabled, I've tried hard resetting, new radio, different SPL, different rom, everything, checked older threads and still nothing found.
Please help! (Also, Windows Live Messenger doesn't work either). Thanks
Click to expand...
Click to collapse
No idea, it could be your network settings but I don't run Canadian network. Please tell us your connection settings maybe someone can assist you further.
connection settings are:
GPRS, 3G
apn: internet.com
user:wapuser1
pass:wap
everything else disabled.
Could it possibly be server side related and that I need to call in to get my connection flushed/reset? Is this even possible to do?
Please help!
I have the same issue. I was told by Rogers in Canada that over the last number of months they have been putting in blocks to lock out unlocked phones (if this is true that sucks).
It is not the Web Browser because I can connect via WIFI.
Phone - AT&T 8925 (Tilt) Unlocked on Rogers in Canada
ROM - 1.62.502.0
No other programs are affected.
Problem - When accessing the Web via cell network all web pages load doing this. After you hit enter it says (bottom bar) Locating... Opening... than a pop up window says "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again." Connection is still active and was never lost. If I disconnect and reconnect same issue.
It has worked for over 5 months and then it just stopped. I have talked with Rogers Tech Support and they say all the settings are correct and they believe it might be the antenna in the phone.
Any Ideas or direction would be helpful!
It is caused by a proxy setting that comes with the AT&T software. It sets something by default in the registry. To fix this go to, Start->Programs->Tools->Proxy Manager and click on 'Disable Proxy'. This should fix that little annoyance and enable users to use the internet without any problems.
Hope that helped a bit.
Cheers!
4tbob said:
I was told by Rogers in Canada that over the last number of months they have been putting in blocks to lock out unlocked phones (if this is true that sucks).
Click to expand...
Click to collapse
That is not true.
trenwei said:
I'm currently using a TyTn II in Canada, with Rogers internet.com settings.
Now everything was working fine (browsing, IM, push email, etc) up to 2 days ago. Now when I run Internet explorer or Opera, it only loads google and nothing else. It's stuck on rendering/even loading the page. Yet, push email, palringo, weather all still work. Any idea's as what it could be?
I know it's not a proxy problem as I have it disabled, I've tried hard resetting, new radio, different SPL, different rom, everything, checked older threads and still nothing found.
Please help! (Also, Windows Live Messenger doesn't work either). Thanks
Click to expand...
Click to collapse
Anytime I have connection issues on any of my phones (Pro or Standard) I just re-install this CAB. It usually works. Give it a try.
(This is for Rogers Wireless Only)
http://forum.xda-developers.com/showthread.php?t=311426
Hi -- I've got an unlocked Kaiser 100 which works fine in other countries (SFR network in France, O2 in Ireland, etc...) and _has_ worked fine on AT&T in America until recently. Suddenly, the data connection has started randomly but chronically started going dead on me. The problem has nothing to do with connection strength: I'm in Manhattan, which generally has excellent coverage, and the connection can be at four bars on HSDPA, and I still won't be able to download _any_ data. Sometimes the four bars HSDPA icon will suddenly change to the no-connection icon for a moment and then return to four bars HSDPA again. And this happens completely unpredictably: the connection is sometimes fine for hours and hours, while at other times I won't be able to download any data for minutes at a time.
I've tried many different connection settings, some with proxy and some without, and haven't been able to fix the issue. AT&T support has been, of course, completely useless, and just stay that these problems happen with unlocked, non-AT&T branded phones.
Does anyone have any ideas? I'm using the stock ROM that came with the phone (and which worked great with AT&T until recently) and I've tried doing two soft-resets, neither of which have fixed the issue.
Thanks!
Alan
p.s. Does anyone understand why a "search this forum" search for ATT or AT&T turns up _nothing_? There are many posts that mention AT&T, obviously, but I can't find any of them doing a search. I wonder if someone has posted on this issue before, but I have no way to find out.
You didn't disable anything with an adv config tool by chance?
You are sure you covered "disable proxy"?
Settings:
Name: MediaNet
Proxy settings: None and "This network connects to the internet" marked
Access point: wap.cingular
Username/password/domain: LEAVE BLANK (don't ask why just leave BLANK)
Adv settings: User server assigned IP address
IP header compression
Servers: All empty
I had a similar issue a few weeks ago and AFTER removing username and pw all worked out well.
Thanks for the response -- yes, those are exactly what my settings have been too. They seem to be working fine right now, but I'm sure I'll have connection issues again later today or tomorrow.
Thanks!
Alan
Thank you for that. Telling me to delete my UN & password in media net settings. For some reason, that has saved me from wanting to destroy my mother ****ing phone.
With the UN and Password in there, my phone (when in use as modem for laptop) would ONLY allow me to run google searches, and visit the paypal website. Note, I couldn't actually click on any google result, as it would then resort to error 404
Thank you again, for lending me the tip that makes my phone work like it ****ing should have out of the goddamn box
I'm having data trouble as well. Everything worked fine as of last night. However, this morning I found that I could only connect to the Internet with Internet Explorer. Other browsers, Opera Mini, Opera 8.65, all hang. SiriusWM5, SelectRadio, Resco Radio, youtubeplay and other Web-enabled programs can no longer connect. However, QuickGPS still works as does RSS Hub.
I've tried to tinker with the connection settings, including using the advice in this thread Nothing works. I ran connection setup to just restore the original settings. Nothing. I can only connect with IE...I'm posting this message with it. Any ideas on what the problem might be that would allow some apps to work and not others?
UPDATE: Opera 9 and Netfront 3.3 actually do work. Live Search works also.
Is Pocket Outlook working? I just called AT&T because mine stopped working today.
It looks like this is a widespread problem. Mine is doing the same thing. At least we know it is the service and not the phone.
Hust saw this post on another website..
"Just got off the phone with an AT&T Rep. The hurricane knocked something out and the data access is supposedly down in half the U.S. ETA was this afternoon per the rep"
good to know. but why would some programs work and others not? don't they all use the same port/server/whatever to access the Web?
this is still weird. but let's hope it's fixed ASAP.
seems they've fixed the problem.
why would some programs work and others not
Click to expand...
Click to collapse
Cannot explain how a network works in three words but services to support whatever network (DNS, routers, proxy's, NAT servers) are spread all over the US so if a major hub or datacenter has a problem, things go south, at least partially.
diar said:
seems they've fixed the problem.
Click to expand...
Click to collapse
Yeah, looks like things are working now.
I've run into a similar issue except that my phone works OK in the US but not in Germany.
I have an AT&T Tilt with the latest official AT&T Windows 6.1 ROM. It works great here in the US. However, when I am in Germany, the data connection seems to drop and the only way I found to get it back is to do a soft reset. It then comes back for a while, but drops again after some time (maybe tens of minutes - there's an X next to the data connection symbol). After the soft reset I am able to connect to download say the weather in the built-in HTC Home. However, after several minutes the connection drops again and checking the weather results in the phone trying to establish a data connection followed by a message that the answering modem has dropped the call.
Anyone know what the problem might be? The issue seems aggravated while connected to Vodafone, less so when connected to O2. After returning to the US everything works as expected again. I haven't done any tweaks to change the data connections of the phone. KaiserTweak sees everything related to GPRS and data set to default. Some people have suggested getting a new radio ROM, but I'm not sure which one would work well in the US, Europe, Japan and Korea.
Try checking AT&T support tutorials at https://www.wireless.att.com/suppor...0&tutorialsCategory=Browser&tutorialId=668770
I have a CAB in the office for intl. data setup. Helped me in Europe all the time, will post tomorrow.
HBEAR said:
Try checking AT&T support tutorials at https://www.wireless.att.com/suppor...0&tutorialsCategory=Browser&tutorialId=668770
Click to expand...
Click to collapse
I will try selecting the carrier when I am in Europe next week. However, I'd prefer something that just works in case a particular carrier is not available. I am hoping the radio will work OK in Korea and Japan too.
tyguy: Do you know what the cab changes? Does it change the radio ROM code or does it modify some other settings? I'm curious as to what is causing the problem. Also, is this a one time operation or do you have to keep changing settings when you go between continents?
tyguy said:
I have a CAB in the office for intl. data setup. Helped me in Europe all the time, will post tomorrow.
Click to expand...
Click to collapse
Would you have it available now? I'm interested in trying it out. Do you have any details on what it actually does?
@emuyshondt
You're not forgotten. I do not know what it does but it worked for me in Europe.
I deleted it from my email since a buddy of mine sent it while I was in Europe and didn't store it.
Let me poke around - I'll come back to you.
Here it is.
Details http://www.taniwha.org.uk/gprs.html
CAB attached
Thanks! I'll try it out this coming weekend.
Lemme know.
Hey there, I just got my G1 and got it unlocked and semi working on Orange UK. What Id like help with is some of the terms you use on here,
What is "Rooting"?
Where do I get the latest firmware update, as it's unlikely to come over the air to an Orange customer.
With the APNs do I need to set up a different APN for each service? I.E. MMS, WAP, GPRS?
My marketplace is showing only free apps, is there another marketplace where all the paid for apps are stored and if so how do I access it?
I'm sorry for all the questions, it's just i'm a total noob.
Thanks in advance,
Steve GOral
Steve_Goral, I can try to give you some answers... still a bit of a newb too tho
Rooting- basically allows you access to system areas/files of you phone that are protected to keep normal users from breaking the os beyond repair. (someone can probably explain this better?)
You'll have to look around for the latest firmware update for your model of phone, RC=bought from t-mobile(not rooted), JFRC=rooted t-mobile firmware, ADP=phones bought for app development(rooted by default)
I have no idea about the APN stuff, sorry.
Market Place is currently only available to RC(rooted & not), US model phones as far as I know.
Cheers for the help, my phone was bought off ebay in the UK. As far as i know it's a total UK model. How do i check the phone to see what the firmware version is?
from the home screen press -> menu-settings-about phone, your firmware version will be near the bottom, check out the Build Number: .....RC##....
Just done that, I'm such a knob. There's actually a whole thread with a proper idiots guide to rooting the phone. As soon as I get in I'm going to do it - if only for the auto rotate feature and stuff. It seems like such a good phone but there's just a couple of features that let it down. Blue tooth seems pretty poor as standard too. Be good to get access to the whole range of apps to really get this thing ripping away.
ya, I basically just did it to have the to 'kewl' features too(coming from the wing which got old pretty fast). With a little bit of reading I got debian (command line os) on here. I can use the G1 as a virtual 'modem' with speeds around 50-100kb/s. Kill apps that are running in the background at will There's a ton of other 'how tos' as well.
I've purchased a Milestone X720 for my wife, but I found the internal WiFi to work erratically at best.
It seems like it has no problem connecting to Google.com webpage (also it can sync mails and contacts), but when trying to access any other webpages (bbc.co.uk, espn.com, etc.) using the browser, it's always timing out. I know it's not a problem with my WiFi / internal network / router /internet connection, because I can navigate just fine using my HTC Desire or home laptops.
It worked for a while yesterday afternoon, then this morning wasn't able to connect to any website.
The wifi connection is using DHCP, and it shows a correct internal IP address and an excellent signal level. I don't think there's much more things I can tweak in the phone configuration, or isn't there?
Maybe it is a defective phone? Did someone experienced something like this? Should I return it and exchange it for a new one?
I'd appreciate any help.
Alex.
Actually, I've been having problems with my wifi. My wifi will stop working on any webpage at seemingly random intervals (I used to think it was when it went into sleep, but it happens when it's not in sleep now also). Eventually after restarting wifi so many times it'll glitch up and I have to restart the phone.
Providing your phone's stock (as in you haven't rooted it or the like) I'd recommend going to your carrier about the problem.
EDIT: I just checked through the posts on this board and some guy was having another problem with his wifi (different from both of ours though), he suggested getting WifiPowerSavingOff off the market, I'll try it and tell you if it fixes my problem. The only problem is it requires root access, I don't even know if it will fix your problem so you're better off sending the phone back (especially since rooting voids your warrenty). One other thing you could try is just a factory reset, it sounds like a software problem so that might work wonders, you might have to reactivate your phone afterwards though.
Well, thank you for your response.
WiFi was working OK when I came back from work, but is not working now.
The phone is unbranded unlocked, so I'll probably have to talk to the seller.
I tried to see if there was an update from Motorola, but every time I go to the System Updates it says that it is unable to connect to the server, so there's probably no available update for this phone yet.
lovecraft said:
Well, thank you for your response.
WiFi was working OK when I came back from work, but is not working now.
The phone is unbranded unlocked, so I'll probably have to talk to the seller.
I tried to see if there was an update from Motorola, but every time I go to the System Updates it says that it is unable to connect to the server, so there's probably no available update for this phone yet.
Click to expand...
Click to collapse
If it's unlocked OTA updates (updating through the settings) are probably disabled, because installing OTA updates will make you lose root (I'm assuming your phone also is rooted if it was unlocked by the seller). do you know what baseband your using right now? Also, have you installed rom manager or anything that can make nandroid backups?
I might be wrong, but I don't think it's rooted, I think it's just the way it's sold, SIM free and unlocked from factory, not by the seller.
Baseband is 3GSMEPU91A_U_91.07.56I
Well if you wanna double check, just look to see if a superuser permissions app is installed (if you don't find one it's not rooted), I never knew they sold them unlocked (although I'm in the US... so I doubt they do here). All I can say is to try a factory reset then, if that doesn't work then talk to the seller. It sounds like more of a software problem since Google works.
In the end it seems there is some kind of incompatibility between the phone and my WiFi router (a Belkin G). Yesterday I managed to borrow another WiFi router (Netgear) and it works flawlessly when connected to this AP.
I will keep testing during the weekend but I'm pretty sure this was the cause.
Thanks Shiny for your help.
Hi. I picked up a milestone via Ebay two days ago and had similar wi-fi issues. After reading a number of forums I discovered that the problem lay with my router - Siemans Gigaset SE587 (Tiscali). The wireless channel or regulatory domain was set to auto channel 1. I think this confuses the phone so with the help of the router manual I disabled auto and reset it to channel 13.
Wi-fi works flawlessly now and it hasn't affected my other devices. The link below might help.