sdcard not being detected. Phone will not boot. HELP! - G1 Q&A, Help & Troubleshooting

I've been having issues with my phone for a while. Mostly the sdcard will occasionally just refuse to be detected and/or mount at all, even in recovery. I am running the danger spl and the corresponding radio. I usually run Cyanogen Mod.
Well my issue now is that my phone is wiped, no rom, and I cannot mount my SDcard to get a new rom loaded. How do I either:
A. Mount my sdcard (or make it be detected or whatever)?
B. Use adb (which I just installed and have no experience with) to flash a rom to my phone without the sdcard.

Do you have an SD card reader?
You need to get a card reader for your pc. download the ROM you want onto the root of the SD card. Put it back in your phone and boot into recovery (Power+home). Then install the ROM on your phone, and reboot.

Dredge said:
Do you have an SD card reader?
You need to get a card reader for your pc. download the ROM you want onto the root of the SD card. Put it back in your phone and boot into recovery (Power+home). Then install the ROM on your phone, and reboot.
Click to expand...
Click to collapse
It appears that you may have missed the fact that he is most likely unable to mount that sd card on his phone.

I'm just going to throw this out there so don't be mad.
Maybe just maybe you need a new sdcard?
If it's not the card then it's probably the phone.

Related

SD Card Damaged, G1 won't boot.

Title says it all. I unmounted as I should have before turning off USB storage, but when I unplugged the USB cable, it said I have a damaged SD card and that I may need to format it. I hit the OK to format and nothing happened. I tried rebooting and nothing happens. I'm rooted with CM 3.9.7 mod, A2SD, etc. I've tried flashing the recovery, etc, but it can't mount the SD card and so fails. Any help would be greatly appreciated. Thanks.
nspbass
do you have a card reader for your computer?
No card reader for my computer.
do you have another phone or device that you can put your sd card in and connect to your computer
yeah, a Dash.
I've run into this problem before. Rebooting the phone. without selecting the format usually fixes it. I think it just happens when the SD card fails to unmount properly.
If you have an update.zip on the SD Card..try applying it through the recovery menu. If it says it fails to mount the SD Card over and over, then your SD Card probably is actually damaged.
Unicornasaurus said:
I've run into this problem before. Rebooting the phone. without selecting the format usually fixes it. I think it just happens when the SD card fails to unmount properly.
If you have an update.zip on the SD Card..try applying it through the recovery menu. If it says it fails to mount the SD Card over and over, then your SD Card probably is actually damaged.
Click to expand...
Click to collapse
Is there any way to fix the card? Like I said, I've got an HTC Dash running WM6 that I can put the card into and connect to the computer. Is there anything to be done?
try to format it from the dash through computer, but im not familiar with dashes
I think I may have figured it out a bit.
The Dash wouldn't recognize the 8GB SDHC, but I fortunately still had the original 1GB, which it did recognize. I was able to transfer the CM 3.9.7 onto it and boot in recovery mode and reload the update.zip file. I'm currently booting up and once that's done, I'll do what is necessary to put my 8GB card in, format it and then try to make everything work again. Suggestions?
you want to use the 3.97? that rom is still experimental. maybe you should use the 3.6.8.1 rom
jad011 said:
you want to use the 3.97? that rom is still experimental. maybe you should use the 3.6.8.1 rom
Click to expand...
Click to collapse
I think he metioned that he was alreay runing 3.9.7
nspbass said:
I think I may have figured it out a bit.
The Dash wouldn't recognize the 8GB SDHC, but I fortunately still had the original 1GB, which it did recognize. I was able to transfer the CM 3.9.7 onto it and boot in recovery mode and reload the update.zip file. I'm currently booting up and once that's done, I'll do what is necessary to put my 8GB card in, format it and then try to make everything work again. Suggestions?
Click to expand...
Click to collapse
That's about it...
I usually keep a back up of everything just in case.
Also, for your usb card reader problems...
http://forum.xda-developers.com/showthread.php?t=546153
he might want to try the stable rom though
My plan succeeded! I'm now waiting for the Market to let me download my apps again. It let me download a couple, but stopped for some reason. It's happened before, so I'm not too worried. If I should be, let me know. Thanks.
ok sounds good
For some reason, Google Talk was disabled. I enabled it and voila, everything's all good!

[Q] I have Rooted the Nook (SDCARD) but I cant get Clockworkmod to work

So I have installed the Rom on the SDCard and I can see the Rom Manager but I took the SD Card out and put the Google App zip from here http://wiki.cyanogenmod.com/index.php?title=Latest_Version on the SD Card booted the nook back and then went into Rom Manager to "Boot Into Recovery" but nothing happens the system just reboots and I don't get that screen with the orange text to let me install the apps from the SD card.
Keep in mind that I rooted the nook the soft way buy making a bootable SD card.
Yadah said:
So I have installed the Rom on the SDCard and I can see the Rom Manager but I took the SD Card out and put the Google App zip from here http://wiki.cyanogenmod.com/index.php?title=Latest_Version on the SD Card booted the nook back and then went into Rom Manager to "Boot Into Recovery" but nothing happens the system just reboots and I don't get that screen with the orange text to let me install the apps from the SD card.
Keep in mind that I rooted the nook the soft way buy making a bootable SD card.
Click to expand...
Click to collapse
It doesn't sound like you've actually rooted the nook - you've just booted into an alternate ROM on the SD card. If you want to get into CWM, you can either create an SD card which has CWM and will launch it when you boot with the SD card in, or you can install it to internal memory so the SD card isn't necessary.
Thanks for the notes. I basically figured out I didn't really need it if I used the trick of turning the unit on while holding the N button. As a follow up question. Now that I have everything setup can I make an image of this SD Card and put that image on a bigger faster card? Or will I need to start over?
Yadah said:
Thanks for the notes. I basically figured out I didn't really need it if I used the trick of turning the unit on while holding the N button. As a follow up question. Now that I have everything setup can I make an image of this SD Card and put that image on a bigger faster card? Or will I need to start over?
Click to expand...
Click to collapse
If you use dd just to copy the raw data on the SD card, you'll get the advantages of faster speed, but the partition will be the exact same size. If you want to take advantage of the bigger space, you'll need to partition the SD card and copy the files manually.
sk8house911 said:
If you use dd just to copy the raw data on the SD card, you'll get the advantages of faster speed, but the partition will be the exact same size. If you want to take advantage of the bigger space, you'll need to partition the SD card and copy the files manually.
Click to expand...
Click to collapse
So I don't know much about dd although I have seen it on the site before so I can look that up. As for the partitioning tool I know the first partition has to be 'boot' not sure on what size it has to be or any other specifics do you know any of that data? Also thanks for taking the time to answer all of this. I am hoping that this will stop some of the Force Close issues I am seeing.
The easiest way is to use http://forum.xda-developers.com/showthread.php?t=1000957 to install CM7 to your SD card. The image takes care of creating the partitions of the appropriate size. As for writing the image itself, you can follow any guide for dd, or use WinImage on Windows which is probably a bit easier to follow.
Yeah but I wanted to know if I could copy all my date over. Just by like copy and paste sort of thing. In other words I dont want to get to carried away on installing all this stuff then have to redo everything once I get a better card.

Handy trick for rooting and installing rom's and what-not...

I've been rooting the Color Nook for a while now, and also my Andy phones. I figured out a trick that might help you'all in the process. I haven't seen it mentioned anywhere, ever, so...
Most of these rooting and what-not procedures have you creating a bootable SD card, as well as installing a zip file on the SD card to install on the Nook. In creating the bootable SD card, however, you often don't have room for the zip file, or you put it on there and it doesn't seem to show up as selectable once you've booted into CWM.
The trick I use all the time is I have a CWM boot SD card - 4GB cheapo card that just has that on it. I put it in and boot up. Then I use the menu to mount the sdcard and then immediately unmount it. Once you do this, you can pop the card out and stick another one in - one with your zip file(s) on it. Then do your install through the menus.
If you don't mount and unmount, it won't like you changing the card and it will fail.
I hope this helps.
I just have CWM installed internally, so reflashing is super simple.
No need for a bootable SD at all.
framitz said:
I just have CWM installed internally, so reflashing is super simple.
No need for a bootable SD at all.
Click to expand...
Click to collapse
Sometimes you don't have that option. Like when installing Phiremod to the EMMC...

Strange Sd card problem

Whenever i Install an gingerbread or cm7 Rom 2.3.7 on my x8,
after it the sd card in the phone is protected against writing, only reading.
The phone dont see the SD card anymore , and on my pc it see the card in my cardreader but i cant copy and paste things from it.
When i directly connect the phone with the sd card in it to my pc via usb, the pc dont see the sd card also.
Then when i flash back to the original Rom, the SD card is back normal like writing and reading and my phone sees the card.
Also i can Copy and paste like normal.
When i flash to froyo pro 24 (2.2.9 android) the phone also see the card like normal.
Looks to me something in 2.3 android versions mess with my SD card and set it on read only...
Does someone know what this could be?
Thnx in advance,
Henk
what sd card do you have? did you try format it?
It is the standard 4gb card that was in the box from the x8.
I install the roms via this sdcard.
I also formatted it but that did not solve the problem.
there is no ''lock''on the card, and after i flash it back to the original stock rom with flashtool it shows the card with no write or read protection.
In android 1.6 ,2.1 and 2.2 till version 2.2.9 i dont have the sd card issues.
I checked mini cm shakira,
herodroid
gx stock
prime hd and 2 other roms based on android 2.3.
Some i reinstalled and full wiped after the installation but that made no difference.
(offcourse i always full wipe/factory before installing the Roms )
In''storage settings it always say:
-total space
unavailable
-Available space
unavailable
-mount Sd card
Insert a sd card for mounting
-erase Sd card
erases all data on the phone Sd card such as music and photos.
(This is the only option that is highlighted and usable, and it erases only files when i tested it, it dont format the card)
I also tried to unlock the read only protection to place the mini sd card in the cardreader but i can't find an option to unlock that protection.
It only shows the files on the card but i cant copy and paste something.
(Both in windows7 and windows xp)
Some of them are on Stock kernel and the mini cm7 on an naa kernel.
(problem with the naa kernel was that i could not update the fix after flashing the rom in xrecovery,
since right after the flash from my sd card to mm7 my sdcard was on read only and write protected........had to reinstall the stock version by flashtool again and install xrecovery again and busybox,rooting, to start after with the flashing of custom roms again.
All of them did something with the sd card that it is read only when i place it in my sd card reader on pc ,and its not visible on the phone.
With some roms i can access the sd card via cwm or xrecovery to flash an rom zip but sometimes it says it cant mount''e'',
which is my sd card.
After i flashed my phone back to stock rom via flashtool, the sd card is visible again on the phone and not read or write protected.
Also on froyo pro 24(android 2.2) i dont have this sd card problem.
Could it be that there is some kind of driver for my sd card so that my phone reconize the sd card?
I really don't know what this issue could be and im stucked on 2.2 now.
you're using 2nd ext partition?
if yes, trying to solve it and boot via cwm and format it using partition sdcard (advance > partition sdcard) you need to backup your data first
if not using 2nd ext partition, try format using this http://hard-disk-low-level-format-tool.software.informer.com/ but i'm not test it yet
maybe u must check and repair your sdcard
1. try with another sdcard
2. make sure if your sdcard format is FAT
or
3. backup your sdcard data to your pc, then format it!
it must be work
Your idea doesnt work
BlackRabbit1703 said:
maybe u must check and repair your sdcard
1. try with another sdcard
2. make sure if your sdcard format is FAT
or
3. backup your sdcard data to your pc, then format it!
it must be work
Click to expand...
Click to collapse
Maybe the ROM doesnt have the necessary drivers. Any idea on how to install them?
Go to following directory via a root explorer app:
Root/system /bin
Find this file:
Fsck_msdos
Delete & Replace with froyopro's disk checker.(same file in froyopro rom)
Yes,this is the file which scan & fix ur sdcard For errors in startup.
This must help u.
Sent From My Black DRAGON

SD card not mounted

Hi there finally flashed a custom rom and got cwm working still odin doesn''t recognize my phone anywhere and now my sd card cant be mounted and i cant even format it in my pc?
Its seen as on the phone and pc but not mounted or to be fromatted
Anyone have a solution or other custom rom to flash through cwm ?
``small edit:when i put in the sd card in other phoen sgs2 then it won''t boot up?
is sd card broken maybe?
Is then only solution to replace sd card?
When i put it back in the gts5570 i it says blank or not supported sd card.
Pleas answer?
use sdcard reader or another phone to check is it broken or is formattable.
langitbiru said:
use sdcard reader or another phone to check is it broken or is formattable.
Click to expand...
Click to collapse
no it's not formatteble so i guess its broken,i will gett a new sd card for it and will try to put on cwm and get it rooted first.

Categories

Resources