I think I do right thing for all those crazy "that he likes to change ROM at least 3 times a day."
Problem: but when I install TTom / using the file *. cab not being installed on PPC? And then whenever I have flashing PPC must re-install and rehabilitate the maps! How can I prevent this from happening?
Simple: I install on SD and flasho when a new ROM should only create device \ windows \ start menu \ programs connect to the executable file TT7
This procedure is part of a memory linked to vers. 6,030 and 6,032
you need is as follows:
cabpack 1.4 available for free here http://www.larshederer.homepage.t-online.de/english.htm
winrar
a text editor (notepad)
extract cabpack in c: \ cabpack
Take the CD of original tomtom
and look for the following file: setuptt6.cab
1) copy on the desktop and extract the contents in c: \ tt
you will find the following files:
_setup.xml
0000DATA.001
0TTTODAY.005
BTCOREIF.003
NAVIGATE ~ 1,000
TTTODA ~ 1,007
00CAB503.009
0GO1108M.008
0TTTODAY.006
BTSDKC ~ 1,004
TTN6BT ~ 1,002
what we want in reality and 'only the first ie' _setup.xml
2) apriamolo with a text editor (notepad)
try the following item / characteristic> <characteristic type="FileOperation"> <characteristic type = "%% CE1 \ Navigator"
and modifichiamolo in / characteristic> <characteristic type="FileOperation"> <characteristic type = "\ Memory Card \ Navigator"
let's go ahead and almost towards the end we find
<characteristic type="Shortcut"> <parm name = "Source" value = "%% CE1 \ Navigator \ TomTom Navigator.exe"
that change in
<characteristic type="Shortcut"> <parm name = "Source" value = "\ Memory Card \ Navigator \ TomTom Navigator.exe"
At this point save the file
hours we should rebuild the file cabinet
3) go in the c: \ cabpack and launch cabpack.exe
set as in photos and press ok
4) after you in the c: \ tt a file named tt6ext.cab copy it into your handheld and tappateci above. verrà asked you to where you install it but left the inside as the destination of your handheld. à ¨ if everything went well at the end of installation you will find memory card in a folder called "navigator"
5) here, create a folder called copiateci inside voices and the voices you want
6) initiated tomtom and cross your fingers
HOW TO INSTALL UPDATING 6.0.30 PROVIDED BY HTC DIRECTLY ON MEMORY CARD
attention that the file will also find CE2%%%% CE11 (unidici and not one) that must be left as they are
Entire contarne 2 should be amended at the beginning of a file and one towards the end
recreated the cab following the instructions in step 3), 4) and 6)
Hence sw free to make the cab
http://www.softpedia.com/get/File-managers/CabPack.shtml
here the contents of the file _setup.xml of tt7
-- <wap-provisioningdoc>
-- <characteristic Type="Install">
<parm name="InstallPhase" value="install" />
<parm name="SetupDLL" value="1" />
<parm name="ProcessorType" value="2577" />
<parm name="OSVersionMin" value="3.0" />
<parm name="OSVersionMax" value="100.0" />
<parm name="BuildNumberMin" value="0" />
<parm name="BuildNumberMax" value="-536870912" />
<parm name="AppName" value="TomTom Navigator" />
<parm name="NumDirs" value="5" />
<parm name="NumFiles" value="6" />
<parm name="NumRegKeys" value="0" />
<parm name="NumRegVals" value="0" />
<parm name="NumShortcuts" value="1" />
</ characteristic>
-- <characteristic Type="FileOperation">
-- <characteristic Type="\Intern geheugen\Navigator" translation="install">
<characteristic type="MakeDir" />
-- <characteristic Type="TomTom Navigator.exe" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="TOMTOM~1.001" />
<parm name="NoDateCheck" />
<parm name="WarnIfSkip" />
</ characteristic>
</ characteristic>
-- <characteristic Type="data.chk" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="0000data.002" />
<parm name="NoDateCheck" />
<parm name="WarnIfSkip" />
</ characteristic>
</ characteristic>
</ characteristic>
-- <characteristic Type="\Windows" translation="install">
<characteristic type="MakeDir" />
-- <characteristic Type="ttn6bt2003.dll" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="TTN6BT~1.003" />
<parm name="NoDateCheck" />
<parm name="WarnIfSkip" />
</ characteristic>
</ characteristic>
-- <characteristic Type="BtCoreIf.dll" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="BtCoreIf.004" />
<parm name="NoOverwriteIfNewer" />
<parm name="Shared" />
</ characteristic>
</ characteristic>
-- <characteristic Type="BtSdkCE30.dll" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="BTSDKC~1.005" />
<parm name="NoOverwriteIfNewer" />
<parm name="Shared" />
</ characteristic>
</ characteristic>
</ characteristic>
-- <characteristic Type="\TomTom" translation="install">
<characteristic type="MakeDir" />
-- <characteristic Type="TTToday.dll" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="0TTToday.006" />
<parm name="NoDateCheck" />
<parm name="WarnIfSkip" />
</ characteristic>
</ characteristic>
</ characteristic>
-- <characteristic Type="%CE11%" translation="install">
<characteristic type="MakeDir" />
-- <characteristic Type="TomTom Navigator.lnk" translation="install">
-- <characteristic Type="Shortcut">
<parm name="Source" value="\Intern geheugen\Navigator\TomTom Navigator.exe" translation="install" />
</ characteristic>
</ characteristic>
</ characteristic>
</ characteristic>
<characteristic type="Registry" />
</ wap-provisioningdoc>
At this point I / we lack a good (not like me) that individuals that values change for installation on sd and that maybe seats somewhere in the file tt7.cab version "installation on sd"
For me to change the values are
-- <characteristic Type="\Intern geheugen\Navigator" translation="install">
in
-- <characteristic Type="Scheda of memoria\Intern geheugen\Navigator" translation="install">
here I have doubts
-- <characteristic Type="\Windows" translation="install">
and here too
<parm name="Source" value="\Intern geheugen\Navigator\TomTom Navigator.exe" translation="install" />
Waiting for a good
EXCUSE MY BAD ENGLISH
Footnotes Please?
that great interest around the subject!
is a problem only for me?
Hi folks.
I need to set up a number of HTC Wings / S730 phones over Rapiconfig,
Im using a small bat file to control the process.
I first enable these registry and policy values:
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic type="HKLM\Security\Policies\Policies">
<parm name="00001001" value="1" datatype="integer"/>
<parm name="00001005" value="40" datatype="integer"/>
<parm name="00001017" value="144" datatype="integer"/>
<parm name="0000101a" value="1" datatype="integer"/>
<parm name="0000101b" value="1" datatype="integer" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
Click to expand...
Click to collapse
And:
<wap-provisioningdoc>
<characteristic type="SecurityPolicy">
<!-- Disallow unsigned apps -->
<parm name="4102" value="0"/>
<!-- Prompt -->
<parm name="4122" value="0"/>
<!-- 2-tier mode -->
<parm name="4123" value="0"/>
</characteristic>
</wap-provisioningdoc>
Click to expand...
Click to collapse
RapiConfigOut.xml verifies that these values are written.
Then I copy a signed cab file to the device with this command:
cecopy.exe some.cab dev:\
Click to expand...
Click to collapse
But when I try to run it with
prun some.cab
Click to expand...
Click to collapse
I get this error message:
ERROR: CreateProcess failed with Errorcode = -2146893818
- Ugyldig signatur.
Click to expand...
Click to collapse
The last part translates to "Invalid signature"
The cab runs fine when opened on the phone directly, it only fails when using prun.exe
And this happens with any cab file, even signed cabs from google maps..
I have not tested another phone, but in an emulator, everythong runs fine
Anyone got the same problem, or have I forgot some registrysetting anywhere?
Thanks
Updated:
Use the following instructions above.
This is not any build. It's just a wip.
Read the following code and instructions to compile for archos 80 gen9 devices.
device/archos/archos-g9 rename it for device/archos/gen9
To compile it sucessfully.
Hi there!
I have a question.
Is it possible to do a firefox os wip as multiboot ext4 image?
For 80 g9 turbo also turbo hdd?
I have a hdd version archos 80 g9.
Sent from my L9000 using xda app-developers app
For compiling Firefox OS for Archos G9.
Do the following steps:
1 - git clone the b2g project
2 - cd B2G
3 - ANDROIDFS_DIR=~/B2G/BACKUP/system ./config.sh archos-gen9 archos-gen9.xml
4 - ./build.sh
5 - fixes for our archos gen9 see the bizcuite posts. He helped me a lot.
Other steps:
archos-gen9.xml:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<remote name="aosp"
fetch="https://android.googlesource.com/" />
<remote name="b2g"
fetch="git://github.com/mozilla-b2g/" />
<remote name="linaro"
fetch="http://android.git.linaro.org/git-ro/" />
<remote name="caf"
fetch="git://codeaurora.org/" />
<remote name="mozilla"
fetch="git://github.com/mozilla/" />
<remote name="mozillaorg"
fetch="https://git.mozilla.org/releases" />
<remote name="archos-ics" fetch="git://gitorious.org/archos-ics/" />
<remote name="apitrace" fetch="git://github.com/apitrace/" />
<default revision="refs/tags/android-4.0.4_r2.1"
remote="caf"
sync-j="4" />
<!-- Gonk specific things and forks -->
<project path="build" name="platform_build" remote="b2g" revision="master">
<copyfile src="core/root.mk" dest="Makefile" />
</project>
<project path="dalvik" name="fake-dalvik" remote="b2g" revision="master" />
<project path="gaia" name="gaia.git" remote="mozillaorg" revision="master" />
<project path="gecko" name="gecko.git" remote="mozillaorg" revision="master" />
<project path="gonk-misc" name="gonk-misc" remote="b2g" revision="master" />
<project path="rilproxy" name="rilproxy" remote="b2g" revision="master" />
<project path="external/moztt" name="moztt" remote="b2g" revision="master" />
<project path="external/valgrind" name="valgrind" remote="b2g" revision="fxos" />
<project path="external/VEX" name="vex" remote="b2g" revision="fxos" />
<project path="external/apitrace" name="apitrace" remote="apitrace" revision="master" />
<!-- Stock Android things -->
<project path="abi/cpp" name="platform/abi/cpp" />
<project path="bionic" name="platform/bionic" revision="aosp-new/ics-plus-aosp" />
<project path="bootable/recovery" name="platform/bootable/recovery" />
<project path="device/common" name="device/common" />
<project path="device/sample" name="device/sample" />
<project path="external/apriori" name="platform_external_apriori" remote="b2g" revision="master" />
<project path="external/bluetooth/bluez" name="platform/external/bluetooth/bluez" />
<project path="external/bluetooth/glib" name="platform/external/bluetooth/glib" />
<project path="external/bluetooth/hcidump" name="platform/external/bluetooth/hcidump" />
<project path="external/bsdiff" name="platform/external/bsdiff" />
<project path="external/busybox" name="platform/external/busybox" remote="linaro" revision="linaro-1.20" />
<project path="external/bzip2" name="platform/external/bzip2" />
<project path="external/dbus" name="platform/external/dbus" />
<project path="external/dhcpcd" name="platform/external/dhcpcd" />
<project path="external/dnsmasq" name="platform/external/dnsmasq" />
<project path="external/elfcopy" name="platform_external_elfcopy" remote="b2g" revision="master" />
<project path="external/elfutils" name="platform_external_elfutils" remote="b2g" revision="master" />
<project path="external/expat" name="platform/external/expat" />
<project path="external/fdlibm" name="platform/external/fdlibm" />
<project path="external/flac" name="platform/external/flac" />
<project path="external/freetype" name="platform/external/freetype" />
<project path="external/giflib" name="platform/external/giflib" />
<project path="external/gtest" name="platform/external/gtest" revision="aosp-new/master" />
<project path="external/harfbuzz" name="platform/external/harfbuzz" />
<!-- icu4c is missing the default tag in caf, that's the *only* reason for the hardcode -->
<project path="external/icu4c" name="platform/external/icu4c" revision="0fa67b93b831c6636ca18b152a1b1b14cc99b034" />
<project path="external/iptables" name="platform/external/iptables" />
<project path="external/jhead" name="platform/external/jhead" />
<project path="external/jpeg" name="platform/external/jpeg" />
<project path="external/libgsm" name="platform/external/libgsm" />
<project path="external/liblzf" name="platform/external/liblzf" />
<project path="external/libnfc-nxp" name="platform/external/libnfc-nxp" />
<project path="external/libnl-headers" name="platform/external/libnl-headers" />
<project path="external/libpng" name="platform/external/libpng" />
<project path="external/libvpx" name="platform/external/libvpx" />
<project path="external/mksh" name="platform/external/mksh" />
<project path="external/opensans" name="platform_external_opensans" remote="b2g" revision="master" />
<project path="external/openssl" name="platform/external/openssl" />
<project path="external/protobuf" name="platform/external/protobuf" />
<project path="external/safe-iop" name="platform/external/safe-iop" />
<project path="external/screencap-gonk" name="screencap-gonk" remote="b2g" revision="master" />
<project path="external/skia" name="platform/external/skia" />
<project path="external/sonivox" name="platform/external/sonivox" />
<project path="external/speex" name="platform/external/speex" />
<project path="external/sqlite" name="platform/external/sqlite" />
<project path="external/stlport" name="platform/external/stlport" />
<project path="external/strace" name="platform/external/strace" />
<project path="external/tagsoup" name="platform/external/tagsoup" />
<project path="external/tinyalsa" name="platform/external/tinyalsa" />
<project path="external/tremolo" name="platform/external/tremolo" />
<project path="external/webp" name="platform/external/webp" />
<project path="external/webrtc" name="platform/external/webrtc" />
<project path="external/wpa_supplicant" name="platform/external/wpa_supplicant" />
<project path="external/wpa_supplicant_8" name="platform/external/wpa_supplicant_8" revision="6dd24fc3792d71edccef9b09140f9a44b063a553" />
<project path="external/zlib" name="platform/external/zlib" />
<project path="external/yaffs2" name="platform/external/yaffs2" />
<project path="frameworks/base" name="platform/frameworks/base" />
<project path="frameworks/opt/emoji" name="platform/frameworks/opt/emoji" />
<project path="frameworks/support" name="platform/frameworks/support" />
<project path="hardware/libhardware" name="platform/hardware/libhardware" />
<project path="hardware/libhardware_legacy" name="platform/hardware/libhardware_legacy" />
<project path="hardware/ril" name="platform/hardware/ril" />
<project path="libcore" name="platform/libcore" />
<project path="ndk" name="platform/ndk" />
<project path="prebuilt" name="platform/prebuilt" />
<project path="system/bluetooth" name="platform/system/bluetooth" />
<project path="system/core" name="platform/system/core" />
<project path="system/extras" name="platform/system/extras" />
<project path="system/media" name="platform/system/media" />
<project path="system/netd" name="platform/system/netd" />
<project path="system/vold" name="platform/system/vold" />
<!-- Archos Gen9 specific things -->
<project path="device/ti/panda" name="android-device-panda" remote="b2g" revision="master" />
<project path="device/archos/archos-g9" name="device-g9" remote="archos-ics" revision="master" />
<project path="hardware/ti/omap4xxx" name="platform/hardware/ti/omap4xxx" />
<project path="hardware/ti/wlan" name="platform/hardware/ti/wlan" revision="60dfeb6e4448bfed707946ebca6612980f525e69" />
<project path="hardware/ti/wpan" name="platform/hardware/ti/wpan" revision="3ece7d9e08052989401e008bc397dbcd2557cfd0" />
<project path="external/negatus" name="Negatus" remote="mozilla" revision="master" />
<project path="external/orangutan" name="orangutan" remote="b2g" revision="master" />
</manifest>
Code:
echo A80:
mkdir -p /home/pedro/firefox_tmp
mount -o loop ./archos.ext4.update /home/pedro/tmp
mount -o loop ./firefox.ext4 /home/pedro/firefox_tmp
rsync -rlpgotvDH --progress --delete ./root/ /home/pedro/tmp/
rsync -rlpgotvDH --progress --delete ./system/ /home/pedro/tmp/
mkdir -p /home/pedro/tmp/data/test /home/pedro/tmp/mnt /home/pedro/tmp/home/pedro/tmp/storage
ln -sf /home/pedro/tmp/storage /home/pedro/tmp/storage
chmod 0777 /home/pedro/tmp/home/pedro/tmp/storage /home/pedro/tmp/data/test
chown -R root:root /home/pedro/tmp/
chmod 0755 /home/pedro/tmp/system/framework/
chmod 6755 /home/pedro/tmp/xbin/su
chmod 0755 /home/pedro/tmp/media/
chmod 0755 /home/pedro/tmp/usr/share/alsa/
chmod 0755 /home/pedro/tmp/lib/dsp/
chmod 0644 /home/pedro/tmp/lib/libOMX.*
chmod 0755 /home/pedro/tmp/lib/
chmod 0755 /home/pedro/tmp/bin/
mkdir -p /home/pedro/firefox_tmp/system/media
cp -R /home/pedro/tmp/media/* /home/pedro/firefox_tmp/system/media/
mkdir -p /home/pedro/firefox_tmp/system/usr/share/alsa/
cp -R /home/pedro/B2G/device/archos/gen9/prebuilt/alsa/ /home/pedro/firefox_tmp/system/usr/share/alsa/
cp -R /home/pedro/B2G/device/archos/gen9/init.rc /home/pedro/firefox_tmp/init.rc
mkdir -p /home/pedro/firefox_tmp/system/lib/dsp
mkdir -p /home/pedro/firefox_tmp/lib
cp -R /home/pedro/tmp/lib/* /home/pedro/firefox_tmp/system/lib/
cp -R /home/pedro/tmp/* /home/pedro/firefox_tmp/
cp -R /home/pedro/tmp/lib/* /home/pedro/firefox_tmp/system/lib/
cp -R /home/pedro/tmp/lib/* /home/pedro/firefox_tmp/lib/
rm -rf /home/pedro/firefox_tmp/system/system/
cp -R /home/pedro/B2G/out/target/product/gen9/system/ /home/pedro/firefox_tmp/
rm -rf /home/pedro/firefox_tmp/app/
rm /home/pedro/tmp/app/Phone.apk
chmod -R 0777 /home/pedro/tmp/system/app/
chmod -R 0755 /home/pedro/tmp/system/bin/
chmod -R 0755 /home/pedro/tmp/system/lib/
chmod -R 0777 /home/pedro/firefox_tmp/app/
chmod -R 0755 /home/pedro/firefox_tmp/system/bin/
chmod -R 0755 /home/pedro/firefox_tmp/system/lib/
sync
Tuesday a working release rom image.
For archos gen9 project path for device gen9 i'll update it soon.
This week a working rom. I think.
I've been working today to give us all a working rom.
Instructions for testing:
copy system.img for /data/local
or
copy system.img for /mnt/storage using adb push system.img /mnt/storage
Link:
[LINK]
https://www.4shared.com/file/vtkG1TbF/system.html
[/LINK]
PS: New version attempting as archos.ext4.update
It's will be released a ext4 attempt friday or saturday.
I'm trying to boot with the new kernel archos.
Welcome to XDA.
Both of your topics seem to be in wrong section, as they should be in general.
Having Firefox Os in ext4 is possible in theory, but no one has ported it to archos G9 series.
Sent from my GT-I9100 using xda app-developers app
thanks a lot.
astronfestmon said:
Hi there!
I have a question.
Is it possible to do a firefox os wip as multiboot ext4 image?
For 80 g9 turbo also turbo hdd?
I have a hdd version archos 80 g9.
Sent from my L9000 using xda app-developers app
Click to expand...
Click to collapse
julle131 said:
Welcome to XDA.
Both of your topics seem to be in wrong section, as they should be in general.
Having Firefox Os in ext4 is possible in theory, but no one has ported it to archos G9 series.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Hi Guys,
It's possible to have multiboot with archos tablet (i am sure with Gen8, i have made it ^^).
Firefox OS can be compiled easily with the device folder from Gen 9 CM9/10.
I start it like CM7 = SDE => Kernel=> Initramfs => OS choice's
With my folder (Gen8 - CM9 CyanoBiz) i have compile it yesterday and my first release works today (3D, Wifi, TS and sound works)
I have just modified an include path in an android.mk in /external folder (don't remember exactly the name).
No modification in the kernel (except all made to run ICS)
On my tab (A70S2 Froyo Gen8) it works well, i haven't try the video playing or other, because i haven't navigation button
On Omap44xx you have already a base with pandaboard based on the same CPU.
I don't know how is started yours alternatives OS, but i can give informations about the compilation of Firefox OS for Archos.
I have passed 1 day to port it (just start the system, not fix all bugs )
Bizcuite
Thanks for telling me.
The kernel ICS from archos gen9 making the defconfig can be possible to run an hdd turbo version. If i'm wrong.
The ext4 if possible we can make a dd with the following system as:
dd if=/dev/zero of=firefox.ext4 bs=1024
I'm just saying that.
Supposing.
astronfestmon said:
Thanks for telling me.
The kernel ICS from archos gen9 making the defconfig can be possible to run an hdd turbo version. If i'm wrong.
The ext4 if possible we can make a dd with the following system as:
dd if=/dev/zero of=firefox.ext4 bs=1024
I'm just saying that.
Supposing.
Click to expand...
Click to collapse
For the kernel, just compile and use the kernel on archos gitorious, you have a 3.0 kernel for archos 80 hdd version.
If you want to compile it:
-Download all sources from B2G git
-Just try to copy/paste the device folder from archos CM9 (see the post of Quinny if he has a git)
-you will have an error (header missing) i have the fix, but i don't remember the path.
-compile by those commands:
. build/environment
lunch (choose the device)
choosecombo (i choose userdebug)
make -jx (x = number of threads)
Bizcuite
Thanks a lot.
I'll try it now.
I'll tell it more later.
astronfestmon said:
Thanks a lot.
I'll try it now.
I'll tell it more later.
Click to expand...
Click to collapse
Another thing:
I have added this lines in init.rc to have a boot of system (i know that is a Viking method, but it works lol) :
Code:
service fakesched /system/bin/fakesched
class main
user root
service b2g /system/bin/b2g.sh
class main
onrestart restart media
service rilproxy /system/bin/rilproxy
class main
socket rilproxy stream 660 root system
user root
group radio
on boot
exec /system/bin/rm -r /data/local/tmp
exec /system/bin/mkdir -p /data/local/tmp
# set RLIMIT_NOFILE to increase soft limit from 1024(default) to 2048.
# Hard limit keeps default value(4096).
setrlimit 7 2048 4096
It's not very different of an Android compilation.
I will made a how to, to port a device to Firefox OS.
PS: I don't know which hardware is used to run wifi (WL127x?) if yes maybe you have to copy and paste the wpa_6_supplicant from CM9 sources to have a working wifi
This is my script to copy and paste all tools/app (Viking Method again ):
Code:
echo A70S:
qemu-img create -f raw ./CYANOBIZ_BETA2.x_A70.img 300M
mkfs.ext4 -qF -O ^huge_file ./CYANOBIZ_BETA2.x_A70.img
mount -o loop ./CYANOBIZ_BETA2.x_A70.img /mnt/
rsync -rlpgotvDH --progress --delete ./root/ /mnt/
rsync -rlpgotvDH --progress --delete ./system/ /mnt/system/
mkdir -p /mnt/data/test /mnt/mnt /mnt/mnt/storage
ln -sf /mnt/storage /mnt/storage
chmod 0777 /mnt/mnt/storage /mnt/data/test
chown -R root:root /mnt/
chmod 0755 /mnt/system/framework/*
chmod 6755 /mnt/system/xbin/su
chmod -R 0755 /mnt/system/media/*
chmod -R 0755 /mnt/system/usr/share/alsa/*
chmod -R 0755 /mnt/system/lib/dsp/*
chmod -R 0644 /mnt/system/lib/libOMX.*
chmod -R 0755 /mnt/lib/*
chmod -R 0755 /mnt/system/bin/*
mkdir /mnt/system/media
cp -R ../../../../device/archos/g8/media/* /mnt/system/media/
mkdir /mnt/system/usr/share/alsa
cp -R ../../../../device/archos/g8/system/usr/share/alsa/* /mnt/system/usr/share/alsa/
cp -R ../../../../device/archos/g8/init.rc /mnt/init.rc
mkdir /mnt/system/lib/dsp
cp -R ../../../../device/archos/g8/system/lib/* /mnt/system/lib/
mkdir /mnt/lib
cp -R ../../../../device/archos/g8/lib/* /mnt/lib/
rm /mnt/system/app/Phone.apk
chmod -R 0777 /mnt/system/app/*
chmod -R 0755 /mnt/system/bin/*
chmod -R 0755 /mnt/system/lib/*
sync
If you have an error with buffer.h in external/negatus/src folders, just add this lines in the android.mk:
LOCAL_C_INCLUDES:= \
$(shell nspr-config --includedir) \
external/stlport/stlport \
gaia/xulrunner-sdk/include \
gaia/xulrunner-sdk/include/nspr \
bionic
Click to expand...
Click to collapse
Bizcuite
It's working the port compliant. Thanks.
I'll try on a mt6577 dual sim ics phone too.
astronfestmon said:
It's working the port compliant. Thanks.
I'll try on a mt6577 dual sim ics phone too.
Click to expand...
Click to collapse
I have just a question, How control the tab without any Nav. buttons?
Firefox has any Nav Bar like android?! Is exist under FF OS? (yes if i/other guy try to implement it of course)
There was only 2 days that i have begun my researches on Firefox OS.
Bizcuite
bizcuite said:
I have just a question, How control the tab without any Nav. buttons?
Firefox has any Nav Bar like android?! Is exist under FF OS? (yes if i/other guy try to implement it of course)
There was only 2 days that i have begun my researches on Firefox OS.
Bizcuite
Click to expand...
Click to collapse
I'm fixing the same issue you told on xulrunner.
Tomorrow Ii'll tell you if it is working my build and we can discuss it.
It's still compiling since yesterday since i told the latest post.
I'm using a pentium d 2.8GHZ with 2GB RAM.
It's finishing the compilation.
More i will tell this afternoon. GMT.
Tomorrow I'll release a proofing video also my build.
You said it's happening to me.
I'll try and test it better.
Tomorrow i'll release my build for archos gen9 also the instructions in this topic.
I've need to make Viking method.
astronfestmon said:
Tomorrow I'll release a proofing video also my build.
You said it's happening to me.
I'll try and test it better.
Tomorrow i'll release my build for archos gen9 also the instructions in this topic.
I've need to make Viking method.
Click to expand...
Click to collapse
Have you any problem with wifi?
Because i cannot choose one and loop on "connectivity/data search" screen...
I have "fix" it by a modification in the wpa_supplicant.conf. I have include directly my own wifi parameters directly into it.
Bizcuite
Me too.
I've made a script to get work the image now it's not booting. Oh My God!
Topic updated.
archos-gen9.xml
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<remote name="aosp"
fetch="https://android.googlesource.com/" />
<remote name="b2g"
fetch="git://github.com/mozilla-b2g/" />
<remote name="linaro"
fetch="http://android.git.linaro.org/git-ro/" />
<remote name="caf"
fetch="git://codeaurora.org/" />
<remote name="mozilla"
fetch="git://github.com/mozilla/" />
<remote name="mozillaorg"
fetch="https://git.mozilla.org/releases" />
<remote name="archos-ics" fetch="git://gitorious.org/archos-ics/" />
<remote name="apitrace" fetch="git://github.com/apitrace/" />
<default revision="refs/tags/android-4.0.4_r2.1"
remote="caf"
sync-j="4" />
<!-- Gonk specific things and forks -->
<project path="build" name="platform_build" remote="b2g" revision="master">
<copyfile src="core/root.mk" dest="Makefile" />
</project>
<project path="dalvik" name="fake-dalvik" remote="b2g" revision="master" />
<project path="gaia" name="gaia.git" remote="mozillaorg" revision="master" />
<project path="gecko" name="gecko.git" remote="mozillaorg" revision="master" />
<project path="gonk-misc" name="gonk-misc" remote="b2g" revision="master" />
<project path="rilproxy" name="rilproxy" remote="b2g" revision="master" />
<project path="external/moztt" name="moztt" remote="b2g" revision="master" />
<project path="external/valgrind" name="valgrind" remote="b2g" revision="fxos" />
<project path="external/VEX" name="vex" remote="b2g" revision="fxos" />
<project path="external/apitrace" name="apitrace" remote="apitrace" revision="master" />
<!-- Stock Android things -->
<project path="abi/cpp" name="platform/abi/cpp" />
<project path="bionic" name="platform/bionic" revision="aosp-new/ics-plus-aosp" />
<project path="bootable/recovery" name="platform/bootable/recovery" />
<project path="device/common" name="device/common" />
<project path="device/sample" name="device/sample" />
<project path="external/apriori" name="platform_external_apriori" remote="b2g" revision="master" />
<project path="external/bluetooth/bluez" name="platform/external/bluetooth/bluez" />
<project path="external/bluetooth/glib" name="platform/external/bluetooth/glib" />
<project path="external/bluetooth/hcidump" name="platform/external/bluetooth/hcidump" />
<project path="external/bsdiff" name="platform/external/bsdiff" />
<project path="external/busybox" name="platform/external/busybox" remote="linaro" revision="linaro-1.20" />
<project path="external/bzip2" name="platform/external/bzip2" />
<project path="external/dbus" name="platform/external/dbus" />
<project path="external/dhcpcd" name="platform/external/dhcpcd" />
<project path="external/dnsmasq" name="platform/external/dnsmasq" />
<project path="external/elfcopy" name="platform_external_elfcopy" remote="b2g" revision="master" />
<project path="external/elfutils" name="platform_external_elfutils" remote="b2g" revision="master" />
<project path="external/expat" name="platform/external/expat" />
<project path="external/fdlibm" name="platform/external/fdlibm" />
<project path="external/flac" name="platform/external/flac" />
<project path="external/freetype" name="platform/external/freetype" />
<project path="external/giflib" name="platform/external/giflib" />
<project path="external/gtest" name="platform/external/gtest" revision="aosp-new/master" />
<project path="external/harfbuzz" name="platform/external/harfbuzz" />
<!-- icu4c is missing the default tag in caf, that's the *only* reason for the hardcode -->
<project path="external/icu4c" name="platform/external/icu4c" revision="0fa67b93b831c6636ca18b152a1b1b14cc99b034" />
<project path="external/iptables" name="platform/external/iptables" />
<project path="external/jhead" name="platform/external/jhead" />
<project path="external/jpeg" name="platform/external/jpeg" />
<project path="external/libgsm" name="platform/external/libgsm" />
<project path="external/liblzf" name="platform/external/liblzf" />
<project path="external/libnfc-nxp" name="platform/external/libnfc-nxp" />
<project path="external/libnl-headers" name="platform/external/libnl-headers" />
<project path="external/libpng" name="platform/external/libpng" />
<project path="external/libvpx" name="platform/external/libvpx" />
<project path="external/mksh" name="platform/external/mksh" />
<project path="external/opensans" name="platform_external_opensans" remote="b2g" revision="master" />
<project path="external/openssl" name="platform/external/openssl" />
<project path="external/protobuf" name="platform/external/protobuf" />
<project path="external/safe-iop" name="platform/external/safe-iop" />
<project path="external/screencap-gonk" name="screencap-gonk" remote="b2g" revision="master" />
<project path="external/skia" name="platform/external/skia" />
<project path="external/sonivox" name="platform/external/sonivox" />
<project path="external/speex" name="platform/external/speex" />
<project path="external/sqlite" name="platform/external/sqlite" />
<project path="external/stlport" name="platform/external/stlport" />
<project path="external/strace" name="platform/external/strace" />
<project path="external/tagsoup" name="platform/external/tagsoup" />
<project path="external/tinyalsa" name="platform/external/tinyalsa" />
<project path="external/tremolo" name="platform/external/tremolo" />
<project path="external/webp" name="platform/external/webp" />
<project path="external/webrtc" name="platform/external/webrtc" />
<project path="external/wpa_supplicant" name="platform/external/wpa_supplicant" />
<project path="external/wpa_supplicant_8" name="platform/external/wpa_supplicant_8" revision="6dd24fc3792d71edccef9b09140f9a44b063a553" />
<project path="external/zlib" name="platform/external/zlib" />
<project path="external/yaffs2" name="platform/external/yaffs2" />
<project path="frameworks/base" name="platform/frameworks/base" />
<project path="frameworks/opt/emoji" name="platform/frameworks/opt/emoji" />
<project path="frameworks/support" name="platform/frameworks/support" />
<project path="hardware/libhardware" name="platform/hardware/libhardware" />
<project path="hardware/libhardware_legacy" name="platform/hardware/libhardware_legacy" />
<project path="hardware/ril" name="platform/hardware/ril" />
<project path="libcore" name="platform/libcore" />
<project path="ndk" name="platform/ndk" />
<project path="prebuilt" name="platform/prebuilt" />
<project path="system/bluetooth" name="platform/system/bluetooth" />
<project path="system/core" name="platform/system/core" />
<project path="system/extras" name="platform/system/extras" />
<project path="system/media" name="platform/system/media" />
<project path="system/netd" name="platform/system/netd" />
<project path="system/vold" name="platform/system/vold" />
<!-- Archos Gen9 specific things -->
<project path="device/archos/archos-g9" name="device-g9" remote="archos-ics" revision="master" />
<project path="hardware/ti/omap4xxx" name="platform/hardware/ti/omap4xxx" />
<project path="hardware/ti/wlan" name="platform/hardware/ti/wlan" revision="60dfeb6e4448bfed707946ebca6612980f525e69" />
<project path="hardware/ti/wpan" name="platform/hardware/ti/wpan" revision="3ece7d9e08052989401e008bc397dbcd2557cfd0" />
<project path="external/negatus" name="Negatus" remote="mozilla" revision="master" />
<project path="external/orangutan" name="orangutan" remote="b2g" revision="master" />
</manifest>
It's compiling as bizcuite told. My research now it's to try compiling with build.sh on a 32bit machine. On 64 bit it's working.
Sent from my L9000 using xda app-developers app
To have a home button, just see this https://github.com/lfont/blog/blob/master/pages/firefox-os-on-the-galaxy-nexus/content.md
Read the section about "Fix the key mapping".
I will try to map the volume up to the Home key.
Bizcuite
bizcuite said:
To have a home button, just see this https://github.com/lfont/blog/blob/master/pages/firefox-os-on-the-galaxy-nexus/content.md
Read the section about "Fix the key mapping".
I will try to map the volume up to the Home key.
Bizcuite
Click to expand...
Click to collapse
I have tried and it works well. Volume up can permit me to return back home screen.
After many test whats work (on gen8)
Sound
Wifi
Bt (turn on but not tested fully)
Adb
Doesn't worked
Video (only test by internet browser)
Int/ext Sdcard cannot be seen (it lakes an equivalent of root explorer)
Auto rotation
Internet navigation bugs when you zoom
Is it the same thing on gen9?
Can you share me your script to fix the pb with wifi please?
Thanks in advanced.
Bizcuite
Sent from my GT-N7100 using xda app-developers app
Desktop formatted
bizcuite said:
I have tried and it works well. Volume up can permit me to return back home screen.
After many test whats work (on gen8)
Sound
Wifi
Bt (turn on but not tested fully)
Adb
Doesn't worked
Video (only test by internet browser)
Int/ext Sdcard cannot be seen (it lakes an equivalent of root explorer)
Auto rotation
Internet navigation bugs when you zoom
Is it the same thing on gen9?
Can you share me your script to fix the pb with wifi please?
Thanks in advanced.
Bizcuite
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I'll give but i'm formatting my desktop because the hard disk blew. Now, I'm giving back whole data into it. As soon as possible I'll give it.
Hello there
Here is a simple guide to add a Custom name to top-left status bar.
All You need is:
- Know how to decompile/recompiling Apk file
- notepad++
- Tool for decompiling, : apkmanager/apktool/Virtous/apkmultitools ...
1. Decompile SystemUI.apk
2. navigate to res/layout/status_bar.xml
3.Open Status_bar.xml with notepad++
4.Copy this line like the following example:
Code:
<TextView android:textAppearance="@style/TextAppearance.StatusBar.Clock" android:gravity="left|center" android:layout_width="wrap_content" android:layout_height="fill_parent" android:text="@string/hello" android:singleLine="true" />
Code:
<?xml version="1.0" encoding="utf-8"?>
<com.android.systemui.statusbar.phone.PhoneStatusBarView android:orientation="vertical" android:id="@id/status_bar" android:background="@drawable/status_bar_background" android:focusable="true" android:fitsSystemWindows="true" android:descendantFocusability="afterDescendants"
xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:systemui="http://schemas.android.com/apk/res/com.android.systemui">
<ImageView android:id="@id/notification_lights_out" android:paddingBottom="2.0dip" android:visibility="gone" android:layout_width="@dimen/status_bar_icon_size" android:layout_height="fill_parent" android:src="@drawable/ic_sysbar_lights_out_dot_small" android:scaleType="center" android:paddingStart="6.0dip" />
<LinearLayout android:orientation="horizontal" android:id="@id/status_bar_contents" android:layout_width="fill_parent" android:layout_height="fill_parent" android:paddingStart="6.0dip" android:paddingEnd="6.0dip">
<LinearLayout android:orientation="horizontal" android:id="@id/notification_icon_area" android:layout_width="0.0dip" android:layout_height="fill_parent" android:layout_weight="1.0">
[COLOR="Red"][B] <TextView android:textAppearance="@style/TextAppearance.StatusBar.Clock" android:gravity="left|center" android:layout_width="wrap_content" android:layout_height="fill_parent" android:text="@string/hello" android:singleLine="true" />[/B][/COLOR]
<com.android.systemui.statusbar.StatusBarIconView android:id="@id/moreIcon" android:visibility="gone" android:layout_width="@dimen/status_bar_icon_size" android:layout_height="fill_parent" android:src="@drawable/stat_notify_more" />
<com.android.systemui.statusbar.phone.IconMerger android:gravity="center_vertical" android:orientation="horizontal" android:id="@id/notificationIcons" android:layout_width="fill_parent" android:layout_height="fill_parent" android:layout_alignParentStart="true" />
</LinearLayout>
<LinearLayout android:gravity="center" android:orientation="horizontal" android:id="@id/clock" android:layout_width="wrap_content" android:layout_height="fill_parent">
<com.android.systemui.statusbar.policy.Clock android:textAppearance="@style/TextAppearance.StatusBar.Clock" android:gravity="center" android:layout_width="wrap_content" android:layout_height="fill_parent" android:singleLine="true" />
</LinearLayout>
<LinearLayout android:gravity="right|center" android:orientation="horizontal" android:id="@id/system_icon_area" android:layout_width="0.0dip" android:layout_height="fill_parent" android:layout_weight="1.0">
<LinearLayout android:gravity="right|center" android:orientation="horizontal" android:id="@id/statusIcons" android:layout_width="wrap_content" android:layout_height="fill_parent" />
<LinearLayout android:gravity="right|center" android:orientation="horizontal" android:id="@id/signal_battery_cluster" android:paddingLeft="2.0dip" android:layout_width="wrap_content" android:layout_height="fill_parent">
<com.android.systemui.statusbar.policy.Traffic android:textAppearance="@style/TextAppearance.StatusBar.Traffic" android:gravity="left|center" android:id="@id/traffic" android:layout_width="wrap_content" android:layout_height="fill_parent" android:singleLine="true" />
<include android:id="@id/signal_cluster" android:layout_width="wrap_content" android:layout_height="wrap_content" layout="@layout/signal_cluster_view" />
<TextView android:textAppearance="@style/TextAppearance.StatusBar.Battery" android:gravity="center" android:id="@id/battery_text" android:paddingLeft="4.0dip" android:layout_width="wrap_content" android:layout_height="fill_parent" android:singleLine="true" />
<com.erryy.BatteryText android:textAppearance="@style/TextAppearance.StatusBar.Clock" android:textSize="12.0dip" android:gravity="center" android:paddingLeft="4.0dip" android:layout_width="wrap_content" android:layout_height="fill_parent" android:layout_marginRight="-3.0dip" android:singleLine="true" />
<ImageView android:id="@id/battery" android:layout_width="wrap_content" android:layout_height="wrap_content" android:paddingStart="4.0dip" />
</LinearLayout>
</LinearLayout>
</LinearLayout>
<LinearLayout android:orientation="horizontal" android:id="@id/ticker" android:animationCache="false" android:layout_width="fill_parent" android:layout_height="fill_parent" android:paddingStart="6.0dip">
<ImageSwitcher android:id="@id/tickerIcon" android:layout_width="@dimen/status_bar_icon_size" android:layout_height="@dimen/status_bar_icon_size" android:layout_marginEnd="4.0dip">
<com.android.systemui.statusbar.AnimatedImageView android:layout_width="@dimen/status_bar_icon_size" android:layout_height="@dimen/status_bar_icon_size" android:scaleType="center" />
<com.android.systemui.statusbar.AnimatedImageView android:layout_width="@dimen/status_bar_icon_size" android:layout_height="@dimen/status_bar_icon_size" android:scaleType="center" />
</ImageSwitcher>
<com.android.systemui.statusbar.phone.TickerView android:id="@id/tickerText" android:paddingTop="2.0dip" android:layout_width="0.0dip" android:layout_height="wrap_content" android:layout_weight="1.0" android:paddingEnd="10.0dip">
<TextView android:textAppearance="@style/TextAppearance.StatusBar.PhoneTicker" android:layout_width="fill_parent" android:layout_height="wrap_content" android:singleLine="true" />
<TextView android:textAppearance="@style/TextAppearance.StatusBar.PhoneTicker" android:layout_width="fill_parent" android:layout_height="wrap_content" android:singleLine="true" />
</com.android.systemui.statusbar.phone.TickerView>
</LinearLayout>
</com.android.systemui.statusbar.phone.PhoneStatusBarView>
"android:textAppearance="@style/TextAppearance.StatusBar.Clock" means that your custom text will have same colors and dimensions defined for clock (these are defined in /values/styles: 16dip and Holo Blue Light ).
If You want to add Your dip and your preferred color, just replaces above line with this:
android:textSize="15.0dip" android:textColor="#ffa6a6a6"
Code:
<TextView [COLOR="Red"]android:textSize="15.0dip" android:textColor="#ffa6a6a6"[/COLOR] android:gravity="left|center" android:layout_width="wrap_content" android:layout_height="fill_parent" android:text="@string/hello" android:singleLine="true" />
You can change text color and size to fit your needs.
android:textSize="x.0dip"
and android:textColor="#hex code of Your preferred color"
for example #ffdd4814 is Ubuntu Orange
5) Now, the last step:
Navigate to res/values/string
and add this at the end of the file:
Code:
<string name="hello">Your text here</string>
Like this example:
Code:
... <string name="quick_settings_rssi_label">RSSI</string>
<string name="quick_settings_rssi_emergency_only">Emergency Calls Only</string>
<string name="quick_settings_settings_label">Settings</string>
<string name="quick_settings_time_label">Time</string>
<string name="quick_settings_user_label">Me</string>
<string name="quick_settings_wifi_label">Wi-Fi</string>
<string name="quick_settings_wifi_not_connected">Not Connected</string>
<string name="quick_settings_wifi_no_network">No Network</string>
<string name="quick_settings_wifi_off_label">Wi-Fi Off</string>
<string name="quick_settings_wifi_display_label">Wi-Fi Display</string>
<string name="quick_settings_wifi_display_no_connection_label">Wireless Display</string>
<string name="quick_settings_brightness_dialog_title">Brightness</string>
<string name="quick_settings_brightness_dialog_auto_brightness_label">AUTO</string>
<string name="status_bar_help_title">Notifications appear here</string>
<string name="status_bar_help_text">"Access them anytime by swiping down.
Swipe down again for system controls."</string>
<string name="accessibility_sleep_button">Sleep button.</string>
[COLOR="Red"]<string name="hello">Your text here</string>[/COLOR]
</resources>
6) Recompile back ... enjoy!!
Service Provider
White clock & wifi/battery/signal white resources [how to]
Center Clock, left signals and how to replace battery/signal/wifi icons with custom
Guidelines to correctly set jdk in Windows and Linux
To flash Your mods...
thanks for the awsome guide bro ..:victory::victory:
Added guidelines to add service provider, center clock, change icons with custom, move icons and change colors
Service Provider
White clock & wifi/battery/signal white resources [how to]
Center Clock, left signals and how to replace battery/signal/wifi icons with custom
Any chance of those moved icons options become a xposed module? That would be great!
guigadourado said:
Any chance of those moved icons options become a xposed module? That would be great!
Click to expand...
Click to collapse
This threads are for help people to understand how android resources works
Sure, You can also make a module
https://github.com/rovo89/XposedBridge/wiki/Development-tutorial
but, as You can see, there is very long tutorial ... :silly:
Not now, because i'm very busy with my studies, but When I'll have time I will try to make a module for Xposed :good:
I have the L90, d415 variant. Headphone volume is awful so after some research I found the correct procedure and lines to mod in mixer_paths.xml. Android limits the volume using this file. I have only modified paths-headphones-lite
This could damage your ears, equipment etc. I am not responsible for any damage to you or your device. Follow the instructions.
You will need: Root access, a good root browser (Root Browser confirmed working, others cause issues), custom recovery
1. Open Root browser and copy system/etc/mixer_paths.xml to somewhere on sdcard0, change permissions to rw-rw-r and reboot
2 Open copied file with text editor, scroll until you find this: <path name="headphones-lite">
<ctl name="SLIM RX1 MUX" value="AIF1_PB" />
<ctl name="SLIM RX2 MUX" value="AIF1_PB" />
<ctl name="SLIM_0_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RX2 MIX1 INP1" value="RX2" />
<ctl name="CLASS_H_DSM MUX" value="RX_HPHL" />
<ctl name="RDAC3 MUX" value="DEM2" />
<ctl name="HPHL DAC Switch" value="1" />
<ctl name="HPHL Volume" value="20" />
<ctl name="HPHR Volume" value="20" />
<ctl name="RX1 Digital Volume" value="70" />
<ctl name="RX2 Digital Volume" value="70" />
</path>
Change HPHL HPHR RX1 and RX2 to the values shown above. Save changes
2. Open root browser, copy and paste edited file into /system/etc confirm overwrite.
3 IMMEDIATELY REBOOT INTO RECOVERY wipe cache, wipe dalvik
4 Reboot, you will have no audio, mics, etc. Immediately open root browser, go to system/etc/mixer_paths.xml and change permissions to rw-r-r 0644
5 IMMEDIATELY REBOOT INTO RECOVERY, wipe cache, wipe dalvik, reboot and enjoy
Correct me if im wrong but why would you need to copy the file then edit and replace it? Just edit the existing file and reboot. Im also sure that a cache and dalvik wipe isn't needed.
I attempted to do that, for whatever reasons I ran into serious mounting/remounting issues was not able to edit/save file and boot looped a couple times, have seen others with the same issue, this works no issues. Not sure if the dalvik wipe is truly necessary, my paranoia from the boot loop perhaps...
Does this work on Bluetooth volume? Also which variant of the l90 is this confirmed to work on? I have D415