Related
So today i finally get the gusto mod my phone Android Dev 1. After downloading all the files and following the instructions here i can't get past the black g1 screen (#8). note i can also get the the rgb screen. thats it, but with so many different posts with similar issues, my brain is pounding. At this point if i can get beack to factory, ill live. what i'll hate is the fact that bricked my phone. i'll most likely get screamed on for not searching, but i think i may be searched out. any help would be appreciated.
thanks.
docfu.
first of all dont freak out lol. Download the dreaming.nbh or w/e file from the rooting instructions and place it at the root of the sdcard. Then get into the rgb screen (Camera + Power) and flash it. That should get you back to factory settings. If not, download the update.zip for w/e region you are in place it on your sd card. Enter recovery (Home + Power) and flash the update.
ok...so i tried the DREAMING file and it kept turning up no image found, alternatively i'm not sure what you mean by w/e region update. i ihavent come across that in my searches.
ok dreaming file did infact work. i feel better knowing that the phone isnt bricked. however after running the update when it prompts for action, i hit the trackball and i'm right back at the rgb screen..AGGGHHHH! sorry. i've been at this since 3pm this afternoon.
Chill. Don't freak. You can't just jump in and do something as soon as your read it. Read the whole thing and if you don't have the patients for this work on that before you work on this. bbreath.
I must say start by saying thanks guys. i stepped back, and actually took my [email protected]@ to bed. Rest does wonders. That said. I've accomplished the factory reset. so i back to a stock g1, and boy does it suck. As stated my phone WAS a dev 1. i've already started the upgrade process, my question at this point is where do you recommend i go from here. back to dev 1 or try one of the other roms. i've already installed the spl, and right now im stuck at the telnetd part of the root process. and this too may have me screaming by the end of the day...
any thoughts would be appreciated.
After the recovery image is installed you need to update the radio if you want to install a cupcake 1.5 ROM. You can get it here, rename 'update.zip', place on the SD card and boot in to recovery and flash. Then flash a ROM of your choice. You should be able to do that on RC 30, but I'm not sure if you need to install a rooted image first, so I'd wait for someone else's input before trying that.
I played it extra safe and used the rc29. as far as i know the proper radio is installed. i'll wait around before i do something stupid. thanks for the input tho. i'm trying to learn everything.
ok...so i went back to the original method for obtaining root. i was so frustrated last nite that i ended up trying to combine 2 slightly diff methods. at this point i call them the telnetd method and root.apk method. correct me if im wrong but niether one mentions the other. so i make it to the bootloader running the root.apk it runs thru the list and the fails at radio_v2. now im on the white screen wuth the skateboarders, the radio #says 1.22.12.29. so i run it again i
now im on the rgb screen at proceeds to attept the update again. this time the dreaimg.nbh fails. i'm not freaking out. im good. because i know im almost there. feedback appreciated. thanks in advance.
y'know i never thought about this..but if i reverted a dev phone to factory settings...did i relock everything? and for the record, i only have a mac. if that matters at all.
Future reference ^-^
In case you encounter this problem in the future, cause it can happen with flashing new roms if you skip a step:
You're only bricked if you are stuck at the G1 boot screen but can't get into recovery or fastboot, adb or anything. In cases where you can still get to other phone options to start over, rest assured your phone does still work, just need to step back and figure it out, which you did in this case with a little help ^-^ First few times doing anything to my phone, I went into panic mode a couple of times thinking I bricked until I read around and found out otherwise.
Just in case you didn't know these things, if you did, well, hope it was a nice read? ^-^
doctorfugazi said:
ok...so i went back to the original method for obtaining root. i was so frustrated last nite that i ended up trying to combine 2 slightly diff methods. at this point i call them the telnetd method and root.apk method. correct me if im wrong but niether one mentions the other. so i make it to the bootloader running the root.apk it runs thru the list and the fails at radio_v2. now im on the white screen wuth the skateboarders, the radio #says 1.22.12.29. so i run it again i
now im on the rgb screen at proceeds to attept the update again. this time the dreaimg.nbh fails. i'm not freaking out. im good. because i know im almost there. feedback appreciated. thanks in advance.
y'know i never thought about this..but if i reverted a dev phone to factory settings...did i relock everything? and for the record, i only have a mac. if that matters at all.
Click to expand...
Click to collapse
Well... if you actually purchased a dev phone it should not be sim locked.
Technically... after the rooting process, we all have dev phones with the exception of the sim lock.
So... what SPL are you using?
What ROM are you trying to install? Some roms you should consider partitioning your sdcard.
What radio do you have?
First thing is first.
Get the 1.4 recovery if you haven't done so already. 1.4 Recovery
Because this allows you to select any .zip file without having to rename it to update.zip. This saves on confusion so you don't try flashing a spl (like danger spl )before a radio (could brick your phone).
Second
You need the 1.5 radio to use cupcake. 2.22.19.26I
Third
Consider an spl. You have 4 choices. HARDSPL (Recommended), Eng SPL (what the dev phone defaults with.. skateboarding androids), the standard spl (nondev) and Danger SPL (risk bricking but worth it because you have more memory for your ROMs and can try HERO builds).
Fouth
Find your rom. NOTE: Read each post carefully! If it says you need a specific spl then get it! Otherwise it won't work. Some require the Danger SPL. If you chose a JF rom then you should be alright and don't even need to partition your card and it will work just like the OTA release. Some (such as Cyanogens 3.9.7) are experiemental and are not recommended for noobs.
Fifth (and probably the most important)
ALWAYS BACKUP WITH NANDROID!!!
In the event that you think that you've bricked your phone. I would say that there is a 90% chance that you didn't. As long as you have a nandroid backup and can get to the bootloader then you still have a phone. Just make sure the fastboot.exe file is in your sytem32 directory of your computer. Open CMD and cd to your fastboot backups saved on your computer. Simply
fastboot flash boot boot.img <enter>,
fastboot flash system system.img <enter>,
fastboot flash userdata data.img <enter>
fastboot reboot <enter>
and you should be back to where you were immediately after the point you backed up. Think of it as a system restore for Windows. It couldn't hurt to have a few backups stored.
If you have any questions or problems include information for us to read in a single post and edit as necessary.
Example:
AT&T
Cyanogen 3.9.7 Rom
Recovery 1.4
HARD SPL
Radio 2.22.19.26l
8GB class 4 sd card (7gb fat32/900mb ext3/100mb swap)
Theme version if any.
That way we know what we are working with.
Happy flashing.
rest assured i was in panic mode yesterday. but honestly the only thing i could really do was just step back for a while, meaning get some rest tackle it with a clean head. its frustrating for sure. this one guy tho who posted in the brick think tank thread...just cuz he couldnt figure things out in an hour he got pissed and started screaming waste of time this that and the other. total BI$CH! I was like whoa. I was at that point too. but Im not tryna be that guy.
Now, if could just figure out if i have to start from scratch, i just might be able to get my phone working again in time fro me to go to work tmrw morning.
So... what SPL are you using?
the hard SPL found here
What ROM are you trying to install?
Well i was trying to follow suggestion on something simple, like one of the early jesusfreke's. if i can step it up sure why not. but i'll pass on the partitioned sdcard setup for now.
actually I'll run with JesusFreke JFv1.51 US CRB43
What radio do you have?
radio number listed in my previous post.
Hey thanks by the way for taking the time out of your day to respond to this. i know u guys get your fair share of spazmiesters, so i appreciate it totally.
after doing research it seems that all the current roms require partitioning. or is that optional just for running apps to sd?
partitioning is optional of apps2sd for preformance. some like myself have three partitions, the third being for a linux swap
Ok ive final decided on the dudes cupcake 101. the ? i have now is do i start from scratch. im kind of in limbo as i'm stuck on the bootloader. if remember correctly i got half way thru the root process and it went down hill from there.
TMobile
RC29 / previously Dev 1
Recovery 1.4
HARD SPL
Radio currently 1.22.12.29 / trying to get to 2.22.19.26l
4gb card
(hope i did that right)
doctorfugazi said:
Ok ive final decided on the dudes cupcake 101. the ? i have now is do i start from scratch. im kind of in limbo as i'm stuck on the bootloader. if remember correctly i got half way thru the root process and it went down hill from there.
TMobile
RC29 / previously Dev 1
Recovery 1.4
HARD SPL
Radio currently 1.22.12.29 / trying to get to 2.22.19.26l
4gb card
(hope i did that right)
Click to expand...
Click to collapse
Okay... you have the recommended recovery and spl.
So all you need to do is get your rom and radio and store the zip files to the root of your sdcard. You don't need to rename them.
Just boot in recovery (power+home) and scroll down to:
[Alt+A] apply any zip from sd
And then you should see the zip files.
Upgrade your radio first.
Then your rom.
Another note... make sure you have a data plan once you've installed your rom. Depending on your rom version, you may not be able to sign in without one. If you can't sign in, you can't use your phone which is why most would recommend a custom rom or an adp rom.
Now... if I'm not mistaken... you do NOT have to partition your sdcard to install a rom (unless it's a HERO rom).
You may want to consider doing so however.
The advantages are that you can have virtually unlimited storage for apps and it's much easier to restore them after a wipe because they are still on your sdcard. Some apps will recognize the partitioned sdcard and automatically do all the apps2sd work for you by default. It is also recommended that you use at least a 2gb class4 card at MINIMUM. Any slower then a class 4 may result in system crashes and errors. Any less then a 2gb card is almost not worth all the effort since you'll likely be using at least a quarter of it for the apps2sd. I would suggest buying at least a 8gb class 6 card for less then $50 online. It's both fast and plenty of storage. With apps to sd, if you do need to wipe you still have all of your apps installed. A great advantage of having apps2sd.
Also... try different roms! There are DOZENS out there! Some have the htc music installed, some have myfaves, some have special cameras, etc. Don't be afraid to experiment. As long as you have a backup and can get to the bootloader (skateboarding androids) and a pc, you can't go wrong! If fact... with the 1.4 recovery you can store several different roms on your sdcard, backup your current rom, wipe, flash a new rom to try it, wipe, flash a different rom to try that one, etc. If you decide that you didn't like any of those... just restore back to your previous backup. Simple as that. No pc needed. However having a pc is handy to get logcat information if it's not booting for some reason.
Speaking of roms not booting... while your experimenting with various roms... you MUST have patience. Sometimes (based on my personal experience with about 10+ different roms) they can take up to 15 minutes to boot up. You can literally be staring at the ANDROID or HTC logo this entire time. Unless you are using ddms.bat or adb shell logcat, you will be clueless of whats going on. DO NOT do anything unless you get the infamous "boot loop". This will be obvious. It will stick at the ANDROID or HTC screen for a while and then blink and go back to the logo. If you see it blink and go back to the logo then try pressing power + talk + menu to restart it and then immediately press the home button to bo back to recovery. Wipe... try again. This time it should work. If it doesn't then restore your backup while you research on that partitcular rom. You may have skipped a step or not have the proper requirements (partitioned card, spl, etc).
With all of that said... good luck and you'll be posting help to other users like yourself before you know it.
Hey Doc, if I'm not mistaken (other guys correct me if I'm wrong), if all, and I mean ALL you have is a boot loader (AKA SPL. ie// skating androids or colored bars) you need to reflash dreaimg.nbh to get a system back.
This ALSO flashes your SPL and RADIO back to default so reflash your radio and SPL afterward. (IN THAT ORDER I HOPE)
Binary100100 is a gentleman and a scholar
nicely written response binary.
I can't stress enough how helpful it is to have the sdk working on a computer when flashing new roms. Get ADB working, it'll save you a ton of headaches.
innerspace said:
nicely written response binary.
I can't stress enough how helpful it is to have the sdk working on a computer when flashing new roms. Get ADB working, it'll save you a ton of headaches.
Click to expand...
Click to collapse
Thank you! I do what I can.
Please help!!! I started messing with my phone about a week ago and I install the Android 1.6 dev. It will not flash anything, not even an spl. What am I missing. I almost feel bad asking because all of you seem to have such knowledge of this stuff. Thank you very much
I don't wanna bring your hopes down thinking this was help lol but u prolly tried flashing cyanogens new rom and its funny cause i was JUST about to post this same shiet. but anyways. i was thinking about flashing the dream file but i dunno if that owuld brick my phone or not. and just to clarify its the htc 1.6 dev right? i mean if thats the only 1? lol
yup
That is exactly what happened! I don't understand how this isn't a major issue and posted everywhere. If you figure it out make sure you let me know and I will do the same. Take it slow!
Can you explain what the problem problem is? What have you been trying to flash? Do you get errors? What recovery image are you using?
Btw, if you're flashing an SPL or radio with Cyans recovery, you can't use the trackball. It must be an update.zip which you install by pressing alt-s and reboot using home+power. If you don't it wont be installed.
Well, I don'tk now about the original poster, but I've tried flashing the OTA cupcake rom to downgrade. renamed to update, went into recovery but it says its not authorized. and.. im afraid to put the dream.nbh or w/e cause it might brick the phone.
PS: This is 1.6 without root. this is the dev ver. so we have the exclamation point recovery not cyan.
lapalways05 said:
Well, I don'tk now about the original poster, but I've tried flashing the OTA cupcake rom to downgrade. renamed to update, went into recovery but it says its not authorized. and.. im afraid to put the dream.nbh or w/e cause it might brick the phone.
PS: This is 1.6 without root. this is the dev ver. so we have the exclamation point recovery not cyan.
Click to expand...
Click to collapse
okay first you need a app called flashrec it will dl cyan recovery image then you reboot.But you need root first also teh dreaimg.nbh file which is RC29.
1.5 cupcake rc30 or something and up was patched with the one click root, that's why we were trying to downgrade to 1.5..
nothing works
I can't use the flash rec because it won't back up the recovery image! Everything I try to flash just goes to installation aborted! I don't know what to do!
It's b ecause 1.5 rc30+up (including 1.6) patched up the 1 click, but an answer would be nice
flash the dream image and start from scratch. that takes everything back to stock, then you can re-root. This thread can walk you through it
http://forum.xda-developers.com/showthread.php?t=491350
it doesnt work
I already tryed that but it won't let me flash the spl!
i tried that too
I tried flashin the dreaimg too. I have ran jf1.5 before and flashed themes and everything. That's why I don't understand why I can't flash anything. The 1.6 work but the recovery image isn't letting me flash anything at all! Once I installed the 1.6 dev it flashed me from the 1.4 cyanogen image to the exclamation image with a differnt bootloader. Ever since then I can't flash anything.
i think he means using camera + power unroot it.but im guessing we don't flash the SPL since we can't, we just flash the dream.nbh?
After Factory Reset
Guys,
I did factory reset but now I can not work with HTC dream as it is requesting me to cerate a gmail account, and I can not cerate because I do nto have internet in my mobile operator.
Does anyone knwo how to bypass this mesage?
please help meee.
r,
bhowd u do the factory reset?
I did it!!!
I had to download sdk, get it working, fastboot the the cyanogen 1.4 recovery image. After the it let me install all of my updates. YAAAAYYYY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
could you tell me the steps of what you did?
I'm stuck with ADP1 1.6 ><
Thanks a lot!!
This will work!!!
Trust me this will work because it took me hours to figure out. Install sdk, get it to work. They explain how to use the program on the forum. After you finally get into fastboot flash the cm 1.4 recovery image. After you do that you can bootup into that recovery and it will then read all of your zip files unlike that stupid exclamation recovery.
slightly confused
So you mean you used http://forum.xda-developers.com/showthread.php?t=502010 to figure out how to use the sdk right?
If not, can show me the link to that guide?
Many thanks!!!
yes
Yes, I used the sticky notes at the top of Dream Q&A to figure it out and it wasn't too fun.
I apparently screwed some things up in my attempt to upgrade to Cyanogenmod 4.1.99 so I can move to 4.2.3. . . anyway, I now have the HTC bootloader up with fastboot, the standard Android recovery, and HTC ADP 1.6 DRC83 firmware installed, and its up and running. I don't have root, and I am completely lost as to how to get root back, get cm-recovery 1.4 back, and from there, I should be ok...
I do have DREAMING.nbh on my sd, and when i go into fastboot(pwr+camera) It gives me a list:
Parsing. . .[DREAMING.nbh]
[1] BOOTLOADER
[2] RECOVERY
[3] BOOT
[4] SPLASH1
[5] SYSTEM
[6] USERDATA
[7] RADIO_V2
Do you want to start update?
<ACTION> Yes
<Power> No
This is where I don't know if I should do anything without advice, as I don't want to brick my G1 any further
Anyone care to help out?
if you messed up like i did a few months back , and lost root because you flashed the htc recovery image and didn't flash cyan's rom on top of it then...i can help. i'm assuming you lost root on your rom because of that, and when you rebooted it took out cyan's recovery image as well, so you can no longer flash anything else into your phone. Alright! first thing's first, is we need to have a look at what spl you're using, take out that dreaming.nbh file from your sd, you won't need it, instead, put on a recovery image like cyanogen's 1.4 or amon ra's 1.2.3 (i suggest the latter)
anyways , you're gonna have to have the hard spl/ engineering spl/ or the haykuro "death/danger" spl installed on your phone. I'm going to assume you have at least one of these, because if you don't and you have the stock spl that's a different story. If you have the stock spl for some reason, you are gonna have to downgrade your phone like you did when you first got root. Research the forums , there are loads of guides on how to downgrade your phone, go to the section that specifically talks about using the bootloader to restore the dreaming.nbh file.
if you do have either the hardspl, death, or engineering's spl,
you need to search the forums on how to use fastboot and adb
you're gonna need to push the recovery image file (cyan's or amon_ra's)
into your phone and wahpow!
you're in the green, once you have the recovery image back in the phone, you can boot into it and flash w.e the hell you want
phamous said:
if you messed up like i did a few months back , and lost root because you flashed the htc recovery image and didn't flash cyan's rom on top of it then...i can help. i'm assuming you lost root on your rom because of that, and when you rebooted it took out cyan's recovery image as well, so you can no longer flash anything else into your phone. Alright! first thing's first, is we need to have a look at what spl you're using, take out that dreaming.nbh file from your sd, you won't need it, instead, put on a recovery image like cyanogen's 1.4 or amon ra's 1.2.3 (i suggest the latter)
Click to expand...
Click to collapse
You hit the nail on the head!
phamous said:
anyways , you're gonna have to have the hard spl/ engineering spl/ or the haykuro "death/danger" spl installed on your phone. I'm going to assume you have at least one of these, because if you don't and you have the stock spl that's a different story. If you have the stock spl for some reason, you are gonna have to downgrade your phone like you did when you first got root. Research the forums , there are loads of guides on how to downgrade your phone, go to the section that specifically talks about using the bootloader to restore the dreaming.nbh file.
if you do have either the hardspl, death, or engineering's spl,
you need to search the forums on how to use fastboot and adb
you're gonna need to push the recovery image file (cyan's or amon_ra's)
into your phone and wahpow!
you're in the green, once you have the recovery image back in the phone, you can boot into it and flash w.e the hell you want
Click to expand...
Click to collapse
I know that I had HardSPL on at one time, would everything that has happened somehow remove it, and how can I check if its still there?
I will likely use Cyanogen's recovery. If possible, link me to a good "howto" on loading Cyanogen from Fastboot.
alright, to check what spl you have, turn off your phone and hold camera and the power on button,
you'll go into your bootloader, and it will display what spl you're running
it's been a while since i remember what numbers belong to what spl, but as long as you don't see the multicolored spl, and you see like three little android bugs on the bottom, you're good to go
uhm i kinda saved random links to things that i used, you're gonna have to read all these documents and learn all about adb, it's worth it in the long run, and there's no better time to learn it now since it's your only hope of getting root back.
http://androidcommunity.com/forums/f10/adb-fastboot-for-rookies-18124/
http://forum.xda-developers.com/showthread.php?t=502010
BUT ANYWAYS
OMG i just found the best guide to your problem right here
http://wiki.cyanogenmod.com/index.php/RE-recovery-img
^^ that is GOLD!
hope this helps buddy!
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
CPLD-4
RADIO-2.22.19.261
Apr 20 2009, 15:30:43
Thats all it gives me, but there are 3 Androids on skateboards at the bottom, and its a all white screen.
I cant seem to get the SDK to work, let alone install on my PC here(Damnit Vista, I can't wait for my copy of Win7 Pro to get here!!!!) so I might just let it charge up overnight, check here in the morning and give it a whirl on my laptop with XP. Hopefully, I can get this all taken care of. You have been a world of help so far. Just keep an eye out for some updates here tomorrow.
SAME HERE wow, couldn't get the damn sdk to work on vista either
GO XP
that's what i did, worked instantly, find someone with xp and ask them to let you borrow it for about an hour
----
you have an appropriate spl btw, it'll be able to fastboot correctly
in the meantime, i'd read up on those links i sent you, especially the last one,
and you'll be good!
goodluck!
ok, looks like I got the SDK to work on here, and I have it updating right now. Its first update was the USB driver. If anyone has some time, and wants to send me a IM over AIM to help me out with this, please IM me.
I am going to let this update, and then hope that I can get it to flash cm-recovery back onto the phone.
cm-recovery 1.4 is BACK! OK! AWESOME
god this had me abit scared.
Ok, back to the prior task at hand. at this point, can I update to CyanogenMod 4.1.99 then update to 4.2.3, or can I update this directly to 4.2.3?
ok, you cant update directly to 4.2.3 XD
Ok, awesome, ive got cm-recovery 1.4, and Cyanogenmod 4.2.3.1 up and running. Time to give Cyanogen some credit. this firmware is FAST!
Also, I want to thank everyone that has helped out with my issue. you are all worthy of a beer...I just aint got any money to pay for a beer for you all right now XD
I also posted this over at HowardForums:
Long story short, I was trying to root my phone and flash it with the latest CM using this guide: http://forum.xda-developers.com/showpost.php?p=4848777&postcount=506 Basically, somewhere along the line I f***ed up, and now when I try to turn it on it gets to the Rogers screen and hangs there. I've tried everything I could find to fix it and nothing has worked. I've tried basically everything I could in recovery, and when I go to fastboot, it's a wierd screen that has sort of a rainbow-ish background and for the first line that says what SPL it is, it doesn't say anything.
Just woundering if anyone knows how to fix this or if it's even at all fixable? And if not, is it possible for me to take it in to Rogers and have them replace it or is that not possible? I bought the phone in early July of this year, so I'm not sure if it's under warranty or anything.
Thanks in advance.
Well atleast you haven't bricked the thing. When you boot in to recovery, is it the stock recovery or Cyanogen's recovery image?
I think it's Cyanogen's. It's the one that says something like CM 1.4 + JF at the bottom.
Ah, in that case you're fine I'm not too familiar with the flashing process for cyanogen ROMs, so I can't really help you out there, but if you choose to use other ROMs you will only need to flash one file.
To get your (newly-rooted) phone working again, you could
download http://forum.xda-developers.com/showthread.php?t=567023 ROM
put it on the root of your sdcard (do not unzip it)
boot in to recovery
wipe
choose flash any zip
follow the promts to flash the ROM
If you don't have a card reader to mount the sdcard, boot in to recovery, then the console and type 'ums_enable' and it will mount on your computer. Then use 'ums_disable' when you're done.
Ok I'll try flashing another ROM and see if it works. Any suggestions for a good non-CM ROM xD?
I think I may have screwed it up since CM now needs you to flash the 1.6 Android, then CM or something. Maybe I did that part wrong. Anyways, I'll try another ROM and post back whether it works or not.
Thanks for the help. I tried flashing a AOSP T-Mobile 1.6 ROM I found and it worked. Now I'm woundering if anyone has any suggestions on other ROMs to try out?
DiSTroy3d said:
Thanks for the help. I tried flashing a AOSP T-Mobile 1.6 ROM I found and it worked. Now I'm woundering if anyone has any suggestions on other ROMs to try out?
Click to expand...
Click to collapse
Dwang's ROM sounds good, might want to give that a try. I meant to link to it in my last post, but I guess I forgot :-S
DiSTroy3d said:
Thanks for the help. I tried flashing a AOSP T-Mobile 1.6 ROM I found and it worked. Now I'm woundering if anyone has any suggestions on other ROMs to try out?
Click to expand...
Click to collapse
You can try Dwangs. Also, if you decide to install cyanogen's rom, follow his instructions on his wiki, but remove the radio.img inside the ADP recovery just to be safe and resign.
hi
i'm a complete novice. i got a local shop to root my t mobile g1, which they have done. The reason i wanted this is so that i could wifi tether it. however they were unable to get this next step to work. i have tried it at home through watching you tube and looking at sites like this - but no luck.
I'm seriously thinking of going back to where i was ie put it back to 1.6 and forget the tethering part. can i do this on a rooted phone, i wish i never rooted it. it cant even find linda file manager in the market anymore.
please help
i am on firmware version 1.0. any help would be appreciated. i guess i shouldn't have got involved in stuff i didn't understand!!!
singingauditor said:
hi
i'm a complete novice. i got a local shop to root my t mobile g1, which they have done. The reason i wanted this is so that i could wifi tether it. however they were unable to get this next step to work. i have tried it at home through watching you tube and looking at sites like this - but no luck.
I'm seriously thinking of going back to where i was ie put it back to 1.6 and forget the tethering part. can i do this on a rooted phone, i wish i never rooted it. it cant even find linda file manager in the market anymore.
please help
i am on firmware version 1.0. any help would be appreciated. i guess i shouldn't have got involved in stuff i didn't understand!!!
Click to expand...
Click to collapse
First you should always do your own work so you understand whats going on. if your still on 1.0 you need to update to a newer firmware (at least 1.5 or 1.6 or even jump up to 2.1). Thats prolly why your not seeing certain things in the market and why wifi tether isnt' working. That shop sounds like they don't know what they are doing.
i know. leave things if you dont understand them. lesson learnt. how do i get back back or should i get an expert to get me back to 1.6?
singingauditor said:
i know. leave things if you dont understand them. lesson learnt. how do i get back back or should i get an expert to get me back to 1.6?
Click to expand...
Click to collapse
Well techincally the "hard part" is done. All you need to do is find a rom that you want. Cyanogen has a stable 1.6 build that you can run. Just put the .zip on the sd card and flash and everything will start working. Let me know if you need any details on how to do anything.
hi
Cyanogen has a stable 1.6 build that you can run. Just put the .zip on the sd card and flash
thanks for the advice. sorry to be dum. So a ROM on a G1 is like an operating system? So if i put on Cyanogen it will allow me to upgrade to 1.6. When you say put the .zip on the sd card you mean there will be a file called cyananogen.zip that i will have downloaded. Put it onto the SD card, and by flash you mean run the file?
sorry but all this terminology is new to me. ROM in my day was read only memory.
grateful for any simple instructions. thanks in advance
singingauditor said:
hi
Cyanogen has a stable 1.6 build that you can run. Just put the .zip on the sd card and flash
thanks for the advice. sorry to be dum. So a ROM on a G1 is like an operating system? So if i put on Cyanogen it will allow me to upgrade to 1.6. When you say put the .zip on the sd card you mean there will be a file called cyananogen.zip that i will have downloaded. Put it onto the SD card, and by flash you mean run the file?
sorry but all this terminology is new to me. ROM in my day was read only memory.
grateful for any simple instructions. thanks in advance
Click to expand...
Click to collapse
First install this recovery (all the instructions are included)
http://forum.xda-developers.com/showthread.php?t=566669
Then here is the thread for cyanogen's stable build with installation instructions
http://forum.xda-developers.com/showthread.php?t=567610
And if you want to jump to a 2.1 firmware here's his that runs great
http://forum.cyanogenmod.com/index....c-would-you-like-a-pony-v507-test5-05132010/?
But basically you'll download his file which will be a zip file (don't matter what its called) and put it on the root of the sd card (in no folders), turn the phone off. Start the phone in bootloader mode (home and power button, hold the 2 buttons in until you get to your recovery screen and then just flash your zip file.
And I'm like you I don't like calling them rom's either, I'm not real old but older than most on here. But everyone calls them rom's. I'd rather just call them builds. Let me know if you understand everything.