Hello,
My G1 stopped receiving usb notifications. each time i connect it to a computer,the battery charges but i get no notifications about the usb.which means, i cannot mount it to a computer.
I run Cyanogen mod 5.0.7 test2, but i dont think its related since its started a couple of days after i installed the new rom.
i also tried it on different computers/usb cables, seems like its device related.
Anyone has any idea?
TIA,
Roy
use fix permissions option in recovery
it works for me
or
simply restart your phone while connected to the pc
It is device related, if you have a recovery that supports usb mounting from it, I suggest go there and mount your phone if you need to get something onto your device asap. If you have time, a full wipe fixed the problem for me.
Just tried the fix_permissions with no success.
the weird thing is that even in recovery mode, when i enable usb mass storage i still dont get anything!!
i'm trying to avoid a full wipe ,and starting to feel like it's a rom issue, anyone thinks the same?
Same Problem
I too have the same issue. Incase you have any solution let us know. I did some search in google but could not find any thing.
Nandroid, wipe, reflash, and retry. Retry with a different ROM and a fresh wipe maybe. You always need to wipe and reflash when you run into errors like this. Like it or not.
However, if that doesn't work, try a few different USB cords. Maybe something happened to yours, or the one you're using doesn't support a G1. Some companies rig theirs to work with just their product.
Edit: Just noticed you tried different cables and computers... How many different cables? Have you just tried your original one and then another one? Or about 3 - 5 maybe? These are quite common cables, and anyone you know should have at least one or two.
this happened to me a few times after i flashed cyans 5.07 test2 rom and all i did was restart and the notification came back. hope that helps.
Happens to me too with T1-T3. I can just reboot with the cable installed and it will mount once the phone is up.
pkrattu said:
this happened to me a few times after i flashed cyans 5.07 test2 rom and all i did was restart and the notification came back. hope that helps.
Click to expand...
Click to collapse
Same thing. This actually happened to me today and a restart brought it back.
I have the same issue
and everyday I have to reboot the phone while connected to the usb cord
to have the phone recognized.
alternative: try using dual mount sd widget out on the market. It lets you mount your SD card and still use the apps on the phone.
Related
I have been having some major issues with my phone after updating to a custom rom. I could not install anything at all on it, whether from the market, or not.
So I wiped and reverted back to my nandroid and I still have the same problem with installations. I am back to FRF83 stock and rooted.
I tried http://forum.xda-developers.com/showthread.php?t=716100 this, but it did not work.
I also made sure to install the latest USB driver and my wife's Nexus (not rooted), connects without a problem to the computer and gives the USB mount notification.
I cannot install anything on my phone, it gets stuck on "Installing" and I can't mount to my computer to transfer files.
Anyone have any ideas as to what could be going on or how to fix it? I think they are related.
Ok so I decided to clear the dalvik cashe, now the auto rotation is always sideways and the computer will not recognize the phone. Do I need to go back to stock, and how do I get the computer to recognize my phone. All drivers are installed and I am running Cog v3 with firebird 2 kernel.
greeto4 said:
Ok so I decided to clear the dalvik cashe, now the auto rotation is always sideways and the computer will not recognize the phone. Do I need to go back to stock, and how do I get the computer to recognize my phone. All drivers are installed and I am running Cog v3 with firebird 2 kernel.
Click to expand...
Click to collapse
Reinstall the drivers.. Use another USB port, if the one you are using doesn't work. And make sure that the Kernel is firebird2 by going to Settings -> About Phone.
After clearing dalvik cache, two reboots should bring it all back up..
I have rebooted several times. I have tried to reflash the rom and the kernel. Different usb ports dont work either. I think I deleted something in the phone that lets it communicate when the dalvik cache was cleared.
That does not make sense. I have deleted my davlik cache many times. Never had that issue
mcord11758 said:
That does not make sense. I have deleted my davlik cache many times. Never had that issue
Click to expand...
Click to collapse
I've cleared it a few times too..
Check two things:
1) Is Odin detecting your phone? (Odin should be started first and then USB plugged in)
2) adb devices ... does this return anything?
Odin does not detect my phone. Will try adb
ADB doesnt see it either?
is there no way to restore usb connctivity to the phone?
have you tried with a different usb cable? or maybe trying your cable with a different phone? some of the more recent blackberry phones use the same cable so if you or someone you know has one, you can test with their phone or cable? clearing the dalvik cache will never cause this problem, so something else must have changed. does the usb port on the phone look clean, do the contacts look normal? maybe try with a different computer?
Clearing dalvik cache only increases the next boot up time since it needs to recreate the whole cache. That is all. This has nothing to do with connecting to computer. Looks like something on ur computer changed.
Ok I will try another cord, but litterally everything was fine just the night before. The next morning I cleard Dalvik and started to have problems, the instant my phone rebooted, the phone is sideways and the only way to get it back is to use the erase personal data. So I am pretty sure something got corrupt. I tried several computers, deleting and reinstalling drivers, reflashing the rom and kernel. Also tried JH7 through CWM.
Problem solved, went to the ATT warranty center and got a rebuilt phone. Now the GPS works and I can connect it to the computer.!
It won't start unless plugged it shows empty battery. sometimes when i unplug it stays connected. In usb settings if choose mass storage it seems to get in a loop of connect-disconnect. I have tried flashing different roms but it didn't fix. Any idea of what is happening? Could it be hardware problem?
I've got the same problem, I've tried every kind of wipe, flash with repartition, clearing stats and so on. I'm starting to suspect it's a hardware issue. The Phone seems to always think it's plugged into USB no matter what, it keeps rebooting to the battery icon over and over until I plug it onto a power source and then it boots fine.
After that I can get it back to normalish by rebooting with the power disconnected using the extended power menu in Darkys Rom.
Can anyone help? When I get back from my trip I'll likely flash it back to stock and send it in for repair, or just ***** at bell and get another new phone.
I'm having the same issue, I've searched all over internet and I found other posts with the same problem.. and no one has found a solution for this.
I think is a hardware problem. after having this I've bought a chinese compatible battery, and when I put that battery in, the phone boots up without even pressing the power on button, so weeeird!
With the original one.. there is no way to boot up without plug the phone. I've had the phone working well for more than 5 months
if someone finds a solution please tell!
thanks in advanced!
I had the some problem and more. I did something and this one has gone. I think i replaced a new update.zip in the phone and that solve it but i am not 100% sure. My phone starts normal but when its off sometimes the battery still flashes. In a week or so i will send it to waranty i think.
grofudaniel said:
I had the some problem and more. I did something and this one has gone. I think i replaced a new update.zip in the phone and that solve it but i am not 100% sure. My phone starts normal but when its off sometimes the battery still flashes. In a week or so i will send it to waranty i think.
Click to expand...
Click to collapse
what did you did? so do you think it's a software problem?
I tried to use a non-original battery and when I put in this new battery, the phone boots up without even press any button. so something it's really wrong. if I try the same with the original battery.. nothing happens, the screen is black unless I plug the phone to the charger.
well, at least I can boot my phone without plugging it this way.
I look forward to know more details about this issue.
thanks!
I look forward to know more details about this issue.
Search loads of posts on this topic . Dont know if problem solved or not .
jje
JJEgan said:
I look forward to know more details about this issue.
Search loads of posts on this topic . Dont know if problem solved or not .
jje
Click to expand...
Click to collapse
unfortunately I've done the search in this forum and I haven't found any solution for this, I can't believe it!
regards!
This problem is back again. I can`t start the phone unless it is plugged. I am with the nervs down at this moment.
what makes me crazy is to not know if it's a software or hardware failure!
in my case seems to be a hardware problem unless the phone recognize the non original battery and that makes a software change that makes the phone to boot.
I'll wait until the gingerbread update, and if after update it doesn't work, I will bring the phone to samsung repair point.
I see that I'm not alone with this problem.
Maby if i could connect the phone on usb to pc i would do something but that dosent work either for me so god have mercy.
I had that problem for a few weeks. Went away with a firmware change. Flashed back to stock and then docs rom. No idea what it was. Just went away.
Are you sure the battery is charged? I had the exact same problem on cm7, turned out my battery ran flat overnight
Sent from my GT-I9000 using XDA Premium App
Try this:
Format all your mounts in recovery mode with Clockworkmod. You can do this by going to 'mounts and storage' and formatting boot, system, data, cache. I did sdcard and sd-ext to be sure).
When you have done that install a 2.2.1 stock rom and the problem should be fixed. From here you can install custom rom's again.
Also try disabling any lagfixes (also via CMW)
KeesKaas said:
Try this:
Format all your mounts in recovery mode with Clockworkmod. You can do this by going to 'mounts and storage' and formatting boot, system, data, cache. I did sdcard and sd-ext to be sure).
When you have done that install a 2.2.1 stock rom and the problem should be fixed. From here you can install custom rom's again.
Also try disabling any lagfixes (also via CMW)
Click to expand...
Click to collapse
OK, I'll do that thanks for the suggestion.
I only have one more doubt left, If I do that, after formating everything in clockworkmod.. What does it happens to the phone? is it going to be able to boot after formating all of this? I'm asking this because I don't know how to download the official rom without using kies and the phone booted up and connected via usb cable.
thanks so much!
I've got the same problem.
I thought it was me trying to flash JVK, but after flashing and reflashing 2.2.1 and 2.3.3 and back with bootloaders the problem stayed. I'll try the format "everything" from CWM, hope this will work.
Still abit strange
(BTW I recently was in sub 15 degrees temperatures, surely this isn't the case??)
I had a problem like this where I was getting USB connected coming up again and again and my phone not starting when it wasn't plugged in.
This sounds dumb and I may just have been lucky but I turned USB debugging off and it stopped, left it off for a day or so, a couple restarts later I thought I'd see if it was still playing up so re-enabled it and nope everything's ok again. That was a couple weeks ago and so far so good, I hadn't seen any reports of anyone else with this.
Might be worth a try
Oh I'm using Darkys 9.5 by the way
My problem got worst! My phone would not charge at all until i reflashed. It now charge and boot normaly without to have it plugged, but my pc don't recognize it, not even in download mode with odin. I quess it has something to do with the hardwhare because both times the problem started when i charged it in the same plug.
i had the same problem,I just cleaned the usb port,plugged in the cable without connecting it to the pc or power source,and it started now it's ok
Me too
Another victim of this issue.
I was running a Darky Rom when I first noticed it... I think I was on Ficeto's 2.3.5 JVT. s
I have tried several steps to rid myself of this issue, with no success:
1. Reflashed ROM CWM
2. Reflashed Kernal CWM
3. Factory Reset, format internal SD, & ODIN flash Stock ROM.
4. Wipe & Flash Juwe ROM.
5. Each time, I also wiped the Dalvik Cache and battery stats.
I have tried leaving the battery out for a lengthy period, I have tried draining the battery all the way down, charging all the way up.
At least with the Launcher I am using now, it has the "Reboot" option instead of just turn off. However, I have to make sure I have a USB cable close by and charger in the car all the time now, just in case it runs out of juice or locks up for some reason and needs a battery pull.
Frustrating... Of course, the warranty expired the end of October.
If anyone has successfully completed the recommendation of formatting boot, system, data and cache and flashing stock Froyo? If you have done it, PLEASE post your detailed steps and the result so we don't waste time repeating something that won't work.
I was eyeing the SGS 2, but with all of the issues the market went through with the SGS, I am thinking maybe I should get away from Samsung...
MM
First off Thanx to MT, the BROKENOUT 1.1 rom is awesome . So after almost a week of trying to get CWM recovery (with no results). I figured just factory data reset, run LGNPST and return to stock zv7. Before that I thought since I'm going back to stock, I would give it one more chance. I ran the code one more time using the terminal emulator and code from BRAD6360's post on installing cwm, as I did previously, ( more like 5 previous times). I tried booting into recovery by holding pwr & vol dwn and I got stock recovery. So after boot up I thought oh well, then something said try rebooting into recovery from CWM, I did and WAH-LAA clockworkmod recovery. Now I'm happy with my BROKEN OUT revo!!!!
I thought about it after I was on Broken out, Stock roms do not have custom recovery so no matter how many times I tried to boot into recovery it wasn't going to work.
I'm not sure if this will work for anyone else, but I hope it helps.
Still not sure why my computer was giving USB not recognized, maybe something with the zv8 rom
Glad you finally got it. I don't think the ZV8 s/w has anything to do with your USB connection problem. I have been having USB problems for months myself. I found a high speed USB cable in a box in my closet the other day while cleaning. I plugged it up to my phone and PC and voila it works again! I still have some problems with my visual voice mail app not detecting my SD now. So I've just ordered a new SD card.
I figured it was the rom since it was a all of the sudden thing for me. I did find that there were post from when the revo was first released,that it had usb problems also. So far no fixes yet unfortunately.
Hi, I have two problems which I noticed with my LG.
1) It refuses to let me do anything like unlock bootloader, or wipe data. I tried wiping from recovery, and I tried wiping from system menu, I just get a screen which says it's going to wipe, but then an error, and I reboot and no wiping took place. I also tried to use the Toolkit for unlocking bootloader, and it seemed to be working, it booted into recovery, prompted me to press Vol UP i think if I wanted to unllock bootloader, and I did, and then it says that unlocking bootloader will require wiping data. I wait and I wait because it says please wait, but nothing happens, data is never wiped. I would like to wipe, flash other ROMs, but it doesn't seem possible. I'm running V20A, but flashed, not installed through LG software. Maybe this flashing had something to do with it?
2) I am having problems charging my phone. It's like the charger keeps connecting and disconnecting, as if I were removing and reattaching it repeatedly. I tried an HTC OEM charger, I tried a USB cable I had for 3 years and connecting it to the laptop, and I tried using my sister's charger from eBay. Of them all, the one from eBay worked best, it still disconnected from time to time, but not so much. It's like, at even the lightest touch, the charger disconnects, like it's loose. I tried these chargers with my sister's HTC Explorer, and they all work fine. I also don't have the LG OEM charger don't know where it is, but these chargers I'm using all used to work fine before.
Chrsp said:
Hi, I have two problems which I noticed with my LG.
1) It refuses to let me do anything like unlock bootloader, or wipe data. I tried wiping from recovery, and I tried wiping from system menu, I just get a screen which says it's going to wipe, but then an error, and I reboot and no wiping took place. I also tried to use the Toolkit for unlocking bootloader, and it seemed to be working, it booted into recovery, prompted me to press Vol UP i think if I wanted to unllock bootloader, and I did, and then it says that unlocking bootloader will require wiping data. I wait and I wait because it says please wait, but nothing happens, data is never wiped. I would like to wipe, flash other ROMs, but it doesn't seem possible. I'm running V20A, but flashed, not installed through LG software. Maybe this flashing had something to do with it?
2) I am having problems charging my phone. It's like the charger keeps connecting and disconnecting, as if I were removing and reattaching it repeatedly. I tried an HTC OEM charger, I tried a USB cable I had for 3 years and connecting it to the laptop, and I tried using my sister's charger from eBay. Of them all, the one from eBay worked best, it still disconnected from time to time, but not so much. It's like, at even the lightest touch, the charger disconnects, like it's loose. I tried these chargers with my sister's HTC Explorer, and they all work fine. I also don't have the LG OEM charger don't know where it is, but these chargers I'm using all used to work fine before.
Click to expand...
Click to collapse
1) Long story short plug your hone and flash it again with some other stock rom that is NOT for your phone's market and then try to root it and unlock it again if that doesnt do it then plug it again and update it regulary since lg will see that you have not matching rom with your phones market.(for example i have 20c euro xxx rom and my phone is for CWT network even so if i plug it in lg softwer i can update it to CWT rom).Be shure to flash OPEN Euro xxx version.
2) if you get that kind of problems even when you plug your phone to computer via USB then it is connector problem (at least i think so) and you should go and service your phone.
Keep in mind that this is just my opinion what should you do it isnt 100% working and it isnt 100% easyest way to do it.Try and see for your self.
P.S. after every flash make sure you do a factory reset of previous rom just to be shure.