Touch Screen Unresponsive When Using Tether - Nexus One Q&A, Help & Troubleshooting

When I use wireless tether, and my phone sleeps, it will run fine. Then after 10 minutes or so, the connection will get buggy and stop running, then when I try to get my phone up again, the touch screen is unresponsive. I've worked around this by holding the power button, which brings up the power down menu even on the lock screen, and I select reboot, because for some reason my touch screen works when the menu pops up. Then I hit cancel, then the touch screen works again. However, now it continues to stay unresponsive even after I hold the power button and the menu comes up.
So, anyone have this problem before? Why would my tethering be cutting out at random times? And why won't my touch screen work when I'm running tether, after waking it from sleep?
EDIT -
I seem to have solved it by turning off my over clocking profiles. I assumed it might have been the change in processor speeds that could be junking things up. I also turned of Access Control, and things seem faster. Will keep this updated if problems arise again.
Edit 2 -
Still having both problems.

I have observed this to a lesser extent as well. Try turning off the screen for a few seconds. Typically when I have some sort of flakey screen behavior turning the screen off seems to resolve it. I think at least some of the touch screen issues are related to the panel getting a little too hot, and I think the tethering applications can certainly get the phone running warm. HTH.

I can let it sit there for a few minutes, and the screen will remain unresponsive.

Related

Tilt Annoyance

Hello all,
I just got my AT&T Tilt and love it so far, except for one major annoyance. When I press the power button, the device will turn the screen back on after a few seconds to a few minutes. The problem is when it's in my pocket, it can accidentally call people. My 8125 and 8525 did not experience this issue.
Any suggestions?
Thanks!
Button lock
It sounds as though the phone isn't set to lock all buttons except the power button when it is in standby. This happened to me last time I re-flashed my Wizard, and I couldn't figure out for ages why my battery was draining so quickly as well!
Settings > Buttons > Lock
Hmm, not seeing any option under Buttons or Lock. I do remember this setting from WM5. It does appear, however, that the buttons are not turning the phone on, it's just waking up even if I leave it on a desk.
You can add lock to the home screen
first press and hold the hang-up button so that it locks. Then just push the power button once. This puts it in standby.
There is a idle timeout for going on standby mode, but I can't find a setting to auto-lock.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
Are you paired to a Bluetooth device? I see similar behavior in my 8525 when in my car - the BT car kit does stuff which "wakes" the 8525
Richard
Try this leaving Google Maps On the Screen
Hi Guys,
I get this behavior when I have Google Maps running. It will even cycle the screen on and off a couple times.
nope and nope. just sitting on the today screen.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
I have the very same problem.
However, my girlfriend whom I also bought a Tilt for, her's doesn't do it.
We've installed all the same software too, so I'm a little puzzled.
start>settings>system> key lock. set it to lock all buttons except power.
rzanology said:
start>settings>system> key lock. set it to lock all buttons except power.
Click to expand...
Click to collapse
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
JonRick said:
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
Click to expand...
Click to collapse
Any number of applications might be starting the device, from weather apps to calendar, diary, time sync etc etc. For example, HTCs weather app will do it depending on how often you have it set to another example I came across from someone was TREO ALERTS that contains a script "refresh.mscr" and it was set up refresh time 30 seconds (this was turning his TyTn II on by itself).
Mike
hard reset and try again.
i'm betting that none of these suggestions were helpful (except the one about some application generating a wakeup event without any other visual notifications).
i was having the same problem, but i just tried to narrow down which running program was causing the events. it's one of:
* wireless manager
* messaging
* IM
my guess is IM; i'm going to test that out in a second.
well, it's none of the above. still seems to wake up randomly anywhere from 15 seconds to several minutes.
seems to happen more frequently when it's just been turned off.
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
dscline said:
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
Click to expand...
Click to collapse
i'm fine with using the lock function, but it still turns on randomly, using battery, and eventually unnecessarily yellowing the screen from backlight aging. my next approach is to check out the notification queue, using a notification cleaner app.
So i am having a similar problem. When i press the power button, the phone's screen turns off but when the keyboard slides, it turns back on... is there a way to make it so the keyboard sliding does not turn on the device? I think the keyboard slides around a little when in my pocket and i hate pushing 3 buttons to unlock my phone... thanks
I was having the same problem.
This is an issue with the ATT rom. Flash over HTC rom and you will be all set.
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the TyTn II):
http://forum.xda-developers.com/showthread.php?t=341419

Phone keeps popping out of suspend

The screen keeps blinking back to full brightness, every 30 seconds or so, when it is left alone and the screen dims normally. It is as if something is pressing a button or touching the screen.
When I press the power button and send it to suspend mode, the backlight goes off, and the tilt no longer responds to touch or button pressing. For some reason it pops itself out of suspend and turns back on every couple minutes. My battery life is going down extremely fast. 100% to 40% in three hours.
Any help would be greatly appreciated. I searched the forum but never found a specific topic for this issue.
MiniDevil said:
The screen keeps blinking back to full brightness, every 30 seconds or so, when it is left alone and the screen dims normally. It is as if something is pressing a button or touching the screen.
When I press the power button and send it to suspend mode, the backlight goes off, and the tilt no longer responds to touch down extremely fast. 100% to 40% in three hours.
Any help would be greatly
appreciated. I searched the forum
but never found a specific topic for
this issue.
Click to expand...
Click to collapse
I have the same problem w
th the backlight comming on by itself & battery life depletes extremely fast. I am using HD 15 Nov with 3.29.
In addition to backlight issue my hardware keys are no longer working.
Please has anyone got any advice
i have the same problem. the only thing that seems to work is doing the keypad lock and putting it to sleep. it will occasionally blink like its trying to come back on but doesnt. another thing i did is put my phone in flight mode, locking the keypad and putting it to sleep. when i do that it doesnt blink or anything. sadly i wont receive phone calls or emails and texts. i think the blinking has something to do with phone signal and accessing the networks.
hth
also i noticed that it wakes from sleep when the keypad "unlock" screen pops up.
i think i found a fix
Ok I hope this helps for you because it seems to work for me. I first went to start/settings/sounds & notifications. Then I clicked on the notification tab and unchecked everything leaving only the ringer on for when calls come in. when I did that, for about 5 minutes (longest I tested it at) the phone did not turn on and the backlight didn’t do that weird grayish flash thing. Afterwords I at first was going to go down the list of all notifications and turn things on/off to see what wakes up my phone but i got too lazy and only checked one setting. One thing I noticed is that when I have the beam: autorecieved notification turned on for display a message on the screen I get that weird backlight flickering thing. So for now I just have sound alerts on when I receive any type of messages and a sound alert for reminders. So far so good, my phone hasn’t woken from sleep in 20 minutes.

Screen won't timeout

Very odd...
My screen won't timeout anymore, unless I manually press the power button. It doesn't matter whether the phone is plugged in or not, and it isn't dependent on the screen I am on either. The screen just stays on forever.
Is there a way I can see if a certain program is preventing the screen from sleeping? Has anyone encountered this type of thing before?
Thanks!
yakkamut said:
Very odd...
My screen won't timeout anymore, unless I manually press the power button. It doesn't matter whether the phone is plugged in or not, and it isn't dependent on the screen I am on either. The screen just stays on forever.
Is there a way I can see if a certain program is preventing the screen from sleeping? Has anyone encountered this type of thing before?
Thanks!
Click to expand...
Click to collapse
Did you check the screen time out settings, maybe you got it at 30mins ?
Yeah, it's set to 30 seconds. It must be some program that tells my phone not to sleep?
Even more odd...
It fixed itself!
Rebooting the phone for the last couple days had no effect on the timeout issue I was having, but doing it this afternoon somehow resolved the issue.
Add this to the list of idiosyncrasies that my SGS has.
I'm having this annoying problem with my SGS (JPY) at the moment. Sometimes it'll go to sleep and turn off the screen by itself, but 9 times out of 10 I have to manually turn it off with the power button.
Has anyone else experienced this with JPY? I'm reluctant to wipe and start again, but it's really starting to piss me off now...
might be an old topic, but i am experiencing this right now
i just installed gingerreal guerilla version yesterday and it works fine
however when i connected my phone to usb for charging this morning, it wont turn off the screen unless i do it manually by pressing the power button
weird thing is as far as i remember there's a setting on USB debug mode to turn off the screen when connected to usb. i think it might be related to the rom or is it always like that on gingerbread? i assume that is the root cause,
although i couldn't post the issue directly on the gingerreal thread due to minimum post count.

N1: Screen issues (Stops working)

Hello,
I was wondering if there is some way to track what is happening on my phone? Since my screen stops working when waked up from standby. i.e. if i press the button at the top to standby and then when i press it again and reach the lock screen the touchscreen is not working, it is simply not registering touch and neither are the 4 small buttons on the bottom (back, settings, home, search). However, the OS in itself is still running as I think since I can still see the time move and if I hold the off button the menu comes up for reboot etc.
Anyone heard of anything like this or any tips how to solve this? I am rooted and running CM6 I think at the moment.
Thank you,
Svarto
Svarto said:
Hello,
I was wondering if there is some way to track what is happening on my phone? Since my screen stops working when waked up from standby. i.e. if i press the button at the top to standby and then when i press it again and reach the lock screen the touchscreen is not working, it is simply not registering touch and neither are the 4 small buttons on the bottom (back, settings, home, search). However, the OS in itself is still running as I think since I can still see the time move and if I hold the off button the menu comes up for reboot etc.
Anyone heard of anything like this or any tips how to solve this? I am rooted and running CM6 I think at the moment.
Thank you,
Svarto
Click to expand...
Click to collapse
so the only way to escape this is by pulling the battery and rebooting? when you do reboot and dont go in standby, the touchscreen works fine?
You can check the issue using logcat and /proc/kmsg.
Also, you can read my threads on the subject, describing the same error with logs, and see if your logs are the same.
I'm currently trying to check if the error repeats itself after full wipe and starting from scratch. In the meantime it didn't show up until I applied a theme, and then after reflashing the ROM it's gone again - I'm still checking, only a day has passed.
Yes, the only solution is to pull out the battery and reboot. Then it works fine and I can go in and out of standby. I havent found a particular pattern to it happening so it is hard to reproduce.
I will have a look at that logcat and your other thread!
Just to guide you - when it happens to me, the phone gets stuck with mmc0 access that receives "CRC error" reply and doesn't go through. Pressing power button for a long time several times and playing with trackball / touching the screen between presses "releases" the "lock", and you'll be able to work with the phone again until you put it to sleep again. If you turn WiFi and BT off and then back on - the problem seems to disappear.

Touch screen stopped working all of a sudden. Registers random inputs

Hey, so my phone has been working fine and then all of a sudden I tried to double tap to turn the screen back on and it didn't work. So I pressed the power button and the screen turned on but I couldn't drag to unlock the screen. I tried tapping all over the screen and dragging and nothing make it unlock. I held the power button down and tried to select to power off, power off and restart, airplane mode, or cancel and none of them worked either. I took out the battery and put it back in and still nothing. The touch screen wouldn't register my inputs but would instead register random inputs throughout the screen and then stop doing that. I took the battery out and put it back in and even in TWRP it would register random inputs and then stop doing stuff altogether. I don't know what the heck to do.
sohungry said:
Hey, so my phone has been working fine and then all of a sudden I tried to double tap to turn the screen back on and it didn't work. So I pressed the power button and the screen turned on but I couldn't drag to unlock the screen. I tried tapping all over the screen and dragging and nothing make it unlock. I held the power button down and tried to select to power off, power off and restart, airplane mode, or cancel and none of them worked either. I took out the battery and put it back in and still nothing. The touch screen wouldn't register my inputs but would instead register random inputs throughout the screen and then stop doing that. I took the battery out and put it back in and even in TWRP it would register random inputs and then stop doing stuff altogether. I don't know what the heck to do.
Click to expand...
Click to collapse
Turn off your phone and inspect the screen. You may have some spot of oil that causes multiple touch inputs. Other temperature conditions that introduce condensation can have the same effect.
If not hardware, try to get to your recovery with and and make a backup first.

Categories

Resources