Related
I think I may have bricked my phone. It's a rooted htc hero cdma. I'm running cyogenmod on it and it was working fine, until using metamorph to apply some changes to the theme.
I went to reboot, and it now it won't load past the htc screen. Even when i try the key combination to put it into recover mode. I didn't install a nandroid backup, and i'd be fine with just completely wiping my phone. can someone please help me?
Have you tried flashing the ROM back over itself without wiping? Try that first, and if that won't work, do a full format and reflash the ROM and you should be good to go.
And just an FYI, you really can't fully brick your phone by flashing a ROM or theme. You can always get it back.
Do what ranger suggested.
To elaborate, I *think* as long as your phone turns on, it is not bricked. Specifically, as long as you can boot to recovery you can do whatever you need to do, be it make fixes or start from scratch again. (I think even if you can't boot to recovery, but it turns on, you can run the RUU ). The only way to brick is to flash a wrong/corrupt radio or anything below the radio level.
Wipe then reboot and wait. When you change the framework, initial boot takes longer.
Sent from my HERO200 using XDA Premium App
I can't even get to the recovery mode screen. it'll only take me to where i can select hboot, fastboot, or wipe. nothing else will load up past that.
What key combination are you using? Hold home then depress end key/power key until phone vibrates.
Sent from my HERO200 using XDA Premium App
Load the fast boot ruu flash
Done
zbach said:
I can't even get to the recovery mode screen. it'll only take me to where i can select hboot, fastboot, or wipe. nothing else will load up past that.
Click to expand...
Click to collapse
Sent from my HTC Hero CDMA using XDA App
mahalocat said:
Load the fast boot ruu flash
Done
Sent from my HTC Hero CDMA using XDA App
Click to expand...
Click to collapse
I can't select that option. Sorry for being kind of new at this, it just loads a bunch of green letters down really quick, telling me it can't find HERCIMG.zip/HERCDIAG.zip files. under that, it says no image or wrong image?
zbach said:
I can't select that option. Sorry for being kind of new at this, it just loads a bunch of green letters down really quick, telling me it can't find HERCIMG.zip/HERCDIAG.zip files. under that, it says no image or wrong image?
Click to expand...
Click to collapse
I am guessing you're not s-off, try this:
http://forum.xda-developers.com/showthread.php?t=958968
il Duce said:
I am guessing you're not s-off, try this:
http://forum.xda-developers.com/showthread.php?t=958968
Click to expand...
Click to collapse
I don't see the command to run "fastboot oem rebootRUU"
zbach said:
I don't see the command to run "fastboot oem rebootRUU"
Click to expand...
Click to collapse
It's a cmd prompt for windows. Open your command prompt from windows, with the phone plugged in usb, and then follow the steps in the OP of that thread.
il Duce said:
It's a cmd prompt for windows. Open your command prompt from windows, with the phone plugged in usb, and then follow the steps in the OP of that thread.
Click to expand...
Click to collapse
it keeps telling me fastboot is an unrecognized command. i have to be doing something wrong here.
zbach said:
it keeps telling me fastboot is an unrecognized command. i have to be doing something wrong here.
Click to expand...
Click to collapse
did you do the adb command first, like it says?
il Duce said:
did you do the adb command first, like it says?
Click to expand...
Click to collapse
yeah, it won't recognize that either. i'm selecting the right path to my C drive too. the driver just isnt recognized :/
You have to go further than just the C drive you have to specify the path all the way to the android-sdk-windows directory. If your on Vista, find the folder, hold the shift key and right click. Then select open a command line here.
EDIT: Yeah you need the drivers installed as well.
I had this happen to me a week ago. Luckily the phone rebooted and I was able to re-flash another recovery using the terminal emulator.
wild1z said:
You have to go further than just the C drive you have to specify the path all the way to the android-sdk-windows directory. If your on Vista, find the folder, hold the shift key and right click. Then select open a command line here.
EDIT: Yeah you need the drivers installed as well.
I had this happen to me a week ago. Luckily the phone rebooted and I was able to re-flash another recovery using the terminal emulator.
Click to expand...
Click to collapse
okay, i'm in now. i'm on the rebootRUU black and silver screen on my phone, but when i go to flash another .zip file, it says can't upload. do i need to download one from somewhere, or place it in a different folder?
I'm on my computer working through my command prompt by the way.
zbach said:
okay, i'm in now. i'm on the rebootRUU black and silver screen on my phone, but when i go to flash another .zip file, it says can't upload. do i need to download one from somewhere, or place it in a different folder?
I'm on my computer working through my command prompt by the way.
Click to expand...
Click to collapse
I've never actually done this fyi, but I think you need the RUU from htc.com, it would probably be under support, then hero cdma? DL that, and input the command "fastboot flash zip correctnameofhtcRUU.zip" in your cmd.
okay, i found and am currently downloading the file. so i should just have to root it to my SD, then flash it, right?
I'm really hoping this works.
il Duce said:
I've never actually done this fyi, but I think you need the RUU from htc.com, it would probably be under support, then hero cdma? DL that, and input the command "fastboot flash zip correctnameofhtcRUU.zip" in your cmd.
Click to expand...
Click to collapse
still nothing. it only tells me its and error, and cannot load the .zip file.
zbach said:
still nothing. it only tells me its and error, and cannot load the .zip file.
Click to expand...
Click to collapse
I don't know where the file should be located, but your posts in the other thread will yield better answers, jason knows the way better than me, given he started the thread. Wait for his response. I assume the error has something to do with where you have the ruu and what path you need to specify in the cmd. Wish I could be of more help. Once you fix it and get back to rooted and such, I HIGHLY recommend you get s-off, its basically like idiot-proofing your phone (no offense) so you can fix anything.
sent from a series of tubes.
Alright so last night i was able to unlock my phone and root it no problem on my mac computer (which I regret and wish i did it on windows) but the phone worked great after. But after debating if I should unroot I went ahead and tried unrooting the phone but the phone would not activate, it became stuck in bootloader. Ive tried everything that I could look up online and even called google for help but they said to search online and ask the developers. Ive tried flashing the stock image back on but it wouldnt work, it kept saying ivalid boot image header fastboot reason fall-through from normal boot mode. I dont even think my computer is recognizing the phone anymore so I dont know how I would get back into terminal to flash anything. If anyone can help me I would appreciate it. I have no idea what to do now after trying for a whole day. Thanks all, hope someone can be a savior.
Firstly, if you want help... please please please use paragraphs and lines and not 1 blob of text. It makes it extremely difficult to know your problem.
Secondly, do not ever call Google or Motorola (or any manufacturer) or any carrier for help. What you do on XDA is not their problem, that is why there is a warning when you unlock the bootloader.
Third, if you're able to get into bootloader mode then you can fix your phone by flashing the stock images. You most likely had the wrong environment or it is not set up properly to flash the stock images.
If you don't feel comfortable doing this kind of stuff, stick to using the phone out of the box rather than tinkering with it.
zephiK said:
Firstly, if you want help... please please please use paragraphs and lines and not 1 blob of text. It makes it extremely difficult to know your problem.
Secondly, do not ever call Google or Motorola (or any manufacturer) or any carrier for help. What you do on XDA is not their problem, that is why there is a warning when you unlock the bootloader.
Third, if you're able to get into bootloader mode then you can fix your phone by flashing the stock images. You most likely had the wrong environment or it is not set up properly to flash the stock images.
If you don't feel comfortable doing this kind of stuff, stick to using the phone out of the box rather than tinkering with it.
Click to expand...
Click to collapse
Yea, my bad. I typed it in a hurry on my phone.
Bootloader is the only screen I am able to get into. Whatever option I choose and hit power, all it does is flash the screen and go back to bootloader.
The stock image I download was from the google developers page but it did not work.
Will anything even work if my computer doesn't recognize the phone? If so how would I go about doing it?
I used to this this years ago and never ran into problems, just for some reason when I tried to unroot it messed up.
Is there anyway to possibly delete the terminal so I could start over and re-root it??
Anyways thanks for your response.
Is the device recognized by the fastboot command when connected to either the mac or pc?
zylstrajs said:
Is the device recognized by the fastboot command when connected to either the mac or pc?
Click to expand...
Click to collapse
Not sure to be exact, if I just go into terminal and enter "adb devices" nothing will pop up but if I enter cd then space and drag the android file into it, it wont say my device number anymore it'll say device. I'm wondering if I could somehow delete my terminal and possibly start over?
dnasr87 said:
Not sure to be exact, if I just go into terminal and enter "adb devices" nothing will pop up but if I enter cd then space and drag the android file into it, it wont say my device number anymore it'll say device. I'm wondering if I could somehow delete my terminal and possibly start over?
Click to expand...
Click to collapse
Adb is for android. You want to use the command: fastboot devices
dnasr87 said:
Yea, my bad. I typed it in a hurry on my phone.
Bootloader is the only screen I am able to get into. Whatever option I choose and hit power, all it does is flash the screen and go back to bootloader.
The stock image I download was from the google developers page but it did not work.
Will anything even work if my computer doesn't recognize the phone? If so how would I go about doing it?
I used to this this years ago and never ran into problems, just for some reason when I tried to unroot it messed up.
Is there anyway to possibly delete the terminal so I could start over and re-root it??
Anyways thanks for your response.
Click to expand...
Click to collapse
If you want to start over you'd want to be flashing the stock images https://developers.google.com/android/nexus/images
Have your phone in bootloader mode (vol down + power)
Go into the directory with fastboot and type fastboot devices.
If your environment is set up properly then it should display your device as the output. From there you can flash back to stock.
dnasr87 said:
Not sure to be exact, if I just go into terminal and enter "adb devices" nothing will pop up but if I enter cd then space and drag the android file into it, it wont say my device number anymore it'll say device. I'm wondering if I could somehow delete my terminal and possibly start over?
Click to expand...
Click to collapse
what does it say why you type
>fastboot devices
zylstrajs said:
what does it say why you type
>fastboot devices
Click to expand...
Click to collapse
command not found, but all I did was open terminal and entered fastboot devices. Not sure if I should enter anything before it.
dnasr87 said:
command not found, but all I did was open terminal and entered fastboot devices. Not sure if I should enter anything before it.
Click to expand...
Click to collapse
You have to change directory to the folder that contains fastboot. Do you even have fastboot environment set up? You need that.
Google search on how to set it up before posting back. There are many guides on XDA on how to accomplish this.
Okay, your environment isn't set up ideally. Follow these instructions to install fastboot and adb on your PC.
http://forum.xda-developers.com/showthread.php?t=2317790
---
Once you've done and you get a reply to the following command, you can move on.
>fastboot devices
---
open the google factory image file (using something like 7zip) : shamu-lrx21o-factory-e028f5ea.tgz
There is a folder in the .tgz file. Extract the contents of that folder to the directory listed for your command prompt (where you successfully ran fastboot just before).
> fastboot flash bootloader bootloader-shamu-moto-apq8084-71.05.img
>fastboot flash radio radio-shamu-d4.0-9625-02.55.03a.img
>fastboot reboot-bootloader
---
The device will reboot. Don't close the terminal window. Now, extract the contents of image-shamu-lrx21o.zip to the same folder that you've been working in. The folder that contains the bootloader and radio files you just flashed.
---
>fastboot flash recovery recovery.img
>fastboot flash boot boot.img
>fastboot flash system system.img
Some time will pass, this img may be sent in parts.
>fastboot flash cache cache.img
>fastboot flash userdata userdata.img
>fastboot reboot
zephiK said:
You have to change directory to the folder that contains fastboot. Do you even have fastboot environment set up? You need that.
Google search on how to set it up before posting back. There are many guides on XDA on how to accomplish this.
Click to expand...
Click to collapse
I did when I rooted it then once it crashed I tried to start over but wiped my computer.. I'll re download and try again
zylstrajs said:
Okay, your environment isn't set up ideally. Follow these instructions to install fastboot and adb on your PC.
http://forum.xda-developers.com/showthread.php?t=2317790
---
Once you've done and you get a reply to the following command, you can move on.
>fastboot devices
---
open the google factory image file (using something like 7zip) : shamu-lrx21o-factory-e028f5ea.tgz
There is a folder in the .tgz file. Extract the contents of that folder to the directory listed for your command prompt (where you successfully ran fastboot just before).
> fastboot flash bootloader bootloader-shamu-moto-apq8084-71.05.img
>fastboot flash radio radio-shamu-d4.0-9625-02.55.03a.img
>fastboot reboot-bootloader
---
The device will reboot. Don't close the terminal window. Now, extract the contents of image-shamu-lrx21o.zip to the same folder that you've been working in. The folder that contains the bootloader and radio files you just flashed.
---
>fastboot flash recovery recovery.img
>fastboot flash boot boot.img
>fastboot flash system system.img
Some time will pass, this img may be sent in parts.
>fastboot flash cache cache.img
>fastboot flash userdata userdata.img
>fastboot reboot
Click to expand...
Click to collapse
I did it on my mac, if i try to connect my phone to a pc it wont recognize it because its stuck in bootloader. I have already tried connecting it
Why does this thread make me LoL so much?
This thread is all over the place. Are you using your PC or Mac right now to do this? If it is a PC, what does Device Manager say when you plug your phone in while its in Bootloader mode?
PaisanNYC said:
Why does this thread make me LoL so much?
This thread is all over the place. Are you using your PC or Mac right now to do this? If it is a PC, what does Device Manager say when you plug your phone in while its in Bootloader mode?
Click to expand...
Click to collapse
Im using mac right now. I want to start from scratch, not sure if possible. but nothing really shows when I connect the device. I think I wipe the software off my computer. Would I be able to start doing it all over on a pc even if its stuck on bootloader and computer wont recognize?
dnasr87 said:
Im using mac right now. I want to start from scratch, not sure if possible. but nothing really shows when I connect the device. I think I wipe the software off my computer. Would I be able to start doing it all over on a pc even if its stuck on bootloader and computer wont recognize?
Click to expand...
Click to collapse
Are you in the NYC area? I'd just come over with my laptop and do it for you.
PaisanNYC said:
Are you in the NYC area? I'd just come over with my laptop and do it for you.
Click to expand...
Click to collapse
Dude im in NH but at this point I will ship the phone to anyone who can fix it and I will pay you guys $100
PaisanNYC said:
Are you in the NYC area? I'd just come over with my laptop and do it for you.
Click to expand...
Click to collapse
dnasr87 said:
Dude im in NH but at this point I will ship the phone to anyone who can fix it and I will pay you guys $100
Click to expand...
Click to collapse
not necessary some one can just use hangouts remote desktop to help you i thinks that's what they use on xda assist
Acer ADB
Your PC might not be recognizing because you got the Acer ADB of doom...
Just roll back your driver.
dnasr87 said:
Dude im in NH but at this point I will ship the phone to anyone who can fix it and I will pay you guys $100
Click to expand...
Click to collapse
Don't send it to a stranger on the internet. You never know who is who behind a screen lol
Honestly bro, if i were close to you, I'd just do it for you. I have the stock image, drivers, and adb/fastboot all set up. i'm good at fixing things, horrible at explaining things.
So I was messing around with ROMs for my HTC one and I have destroyed my phone ;(
I think I forgot to update firmware before installing a new ROM and now I can't get past the fastboot page. It doesn't power on, it goes directly to the fastboot page, and no matter what button I push, it vibrates, shows the "HTC Screen " for about 2 seconds, then re-directs straight back to the fastboot page, I can't even get in to the recovery, any suggestions?
-Ben
naecomc said:
So I was messing around with ROMs for my HTC one and I have destroyed my phone ;(
I think I forgot to update firmware before installing a new ROM and now I can't get past the fastboot page. It doesn't power on, it goes directly to the fastboot page, and no matter what button I push, it vibrates, shows the "HTC Screen " for about 2 seconds, then re-directs straight back to the fastboot page, I can't even get in to the recovery, any suggestions?
-Ben
Click to expand...
Click to collapse
Can you please post the out put from
Code:
fastboot getvar all
Please remove imei and serial numbers before posting.
What Rom did you flash and which recovery did you use(name and version please)? Links if possible :good:
can't get adb to work :/
and it's been around 2 months since I did this so I don't remember which ROM it was, though I think it was the viper ROM, and I use clockwork recovery
naecomc said:
can't get adb to work :/
and it's been around 2 months since I did this so I don't remember which ROM it was, though I think it was the viper ROM, and I use clockwork recovery
Click to expand...
Click to collapse
What OS do you have on your pc. If Windows, what is the phone listed as in device manager. It should be "MY HTC" If its Unknown you need to fix your drivers.
Maybe its a problem with adb itself, What exactly is the problem. Any error messages?
Danny201281 said:
What OS do you have on your pc. If Windows, what is the phone listed as in device manager. It should be "MY HTC" If its Unknown you need to fix your drivers.
Maybe its a problem with adb itself, What exactly is the problem. Any error messages?
Click to expand...
Click to collapse
got adb to work
Download the correct ruu for your device, check that the mid's and Cid's match.
There's a lot of guides that tell you how to flash ruu's
naecomc said:
got adb to work
Click to expand...
Click to collapse
Ok so your device is Sprint. Since its been some time like this it could be difficult to figure out exactly what went wrong so it is best to start by returning the device to stock with and ruu. You should be able to use this one
https://www.androidfilehost.com/?fid=23329332407573774
Download and unzip it you should get a windows .exe file.
Reboot your device to the bootloader and connect your usb cable. The phone should be in fastboot usb mode. In the command window type
Code:
fastboot erase cache
fastboot oem lock
fastboot reboot-bootloader
Wait for it to reboot and go back to fastboot usb then run the ARU.exe. It will return your device to stock.
If you get problems running the ruu let me know. It may be necessary to flash a firmware package to get it to run, but we'll cross that bridge if we come to it :good:
First of all, thank you so much for all your help on this, means a lot.
Now, I did the fastboot commands, but the ruu program freezes whenever I run it after it starts sending the updates
naecomc said:
First of all, thank you so much for all your help on this, means a lot.
Now, I did the fastboot commands, but the ruu program freezes whenever I run it after it starts sending the updates
Click to expand...
Click to collapse
Do you have HTCSync installed. If so uninstall it but leave drivers installed. Reboot and run the RUU again
Nope, no HTCSync installed
also, fastboot works but adb doesn't which is weird
naecomc said:
also, fastboot works but adb doesn't which is weird
Click to expand...
Click to collapse
It depends how your using adb. Fastboot works only in the bootloader.
Adb works only in recovery mode.
As I suspected you'll need to flash the firmware before the ruu will run. Give me a moment link and instructions to follow . If the bootloader is still relocked leave it that way. It needs to be relocked to flash the firmware also.
Edit:-
Download this firmware zip and put it in your fastboot folder. Rename it "firmware.zip"
https://www.androidfilehost.com/?fid=23329332407573774
Reboot the phone into the bootloader and connect fastbootusb. In the fastboot command line type.
Code:
fastboot erase cache
fastboot oem rebootRUU
**---case sensitive ---^^^
Your phone will reboot to a black screen with silver HTC logo. This is ruu mode we can now flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash is just a pre-update. The screen will go off and then return to ruu mode. Flash the zip again immediately.
Code:
fastboot flash zip firmware.zip
The second flash will flash the firmware, the progress bar on the screen will not reach 100% this is normal as long as the command line has finished it's output it's done.
Code:
fastboot reboot-bootloader
with the phone still in the bootloader connected with fastboot usb run the RUU exe on your pc.
After that your software will be completely stock. You should also be able to update with OTA updates Let me know how that goes :good:
dont think that's the right link, thats the link to the RUU
naecomc said:
dont think that's the right link, thats the link to the RUU
Click to expand...
Click to collapse
Lol sorry dude my bad, here's the right link https://www.androidfilehost.com/?fid=23329332407568410
I love you, phone's back to stock, thank you so much
naecomc said:
I love you, phone's back to stock, thank you so much
Click to expand...
Click to collapse
Your Welcome Glad you got it sorted. :good:
I can't seem to get my UK Sim card to work in the phone while it's stock, is there a ROM you would recommend flashing to fix that?
naecomc said:
I can't seem to get my UK Sim card to work in the phone while it's stock, is there a ROM you would recommend flashing to fix that?
Click to expand...
Click to collapse
Sorry I'm not sure how to make that work, I have no first hand experiance with Sprint devices. I know there designed to use a CDMA network. And that they can be used on a GSM Network but I've no idea how to get that to work.
Hopefully someone will come along who does. Maybe @clsA @alray or @nkk71 can help with that?
naecomc said:
I can't seem to get my UK Sim card to work in the phone while it's stock, is there a ROM you would recommend flashing to fix that?
Click to expand...
Click to collapse
Danny201281 said:
Sorry I'm not sure how to make that work, I have no first hand experiance with Sprint devices. I know there designed to use a CDMA network. And that they can be used on a GSM Network but I've no idea how to get that to work.
Hopefully someone will come along who does. Maybe @clsA @alray or @nkk71 can help with that?
Click to expand...
Click to collapse
Not sure about this either, but you should check the Sprint section(s) http://forum.xda-developers.com/sprint-htc-one
(probably in the General section)
maybe this: http://forum.xda-developers.com/showthread.php?t=2586704
I havent read through it completely, just glanced at it, so make sure, that's what you need
nkk71 said:
Not sure about this either, but you should check the Sprint section(s) http://forum.xda-developers.com/sprint-htc-one
(probably in the General section)
maybe this: http://forum.xda-developers.com/showthread.php?t=2586704
I havent read through it completely, just glanced at it, so make sure, that's what you need
Click to expand...
Click to collapse
Theirs also this
http://forum.xda-developers.com/showthread.php?t=2647305
hey sorry I'm sure this has been covered but I've been trying to root my new phone for the past 15+ hours and after installing Android revolution HD one 92.04a9 through Team Win Recovery project v2.6.3.0 it now keeps restarting in recovery and then takes me to Recovery project after a htc logo screen.
This is the first time I have attempted to root a phone and I'm a noob evidently so please go easy on me. (all I wanted was to hook up my bluetooth controller so I can play FF7 with more ease) any help would be greatly appreciated as I've just moved from London to the middle of nowhere and I'm bored out of my mind without my beloved HTC
Thanks a lot Mr. Tickles
I am so frustrated with general support of HTC. I am trying to get in touch with service for two months and no luck. My next phone won't be HTC for sure, I know.
ticklemelee said:
hey sorry I'm sure this has been covered but I've been trying to root my new phone for the past 15+ hours and after installing Android revolution HD one 92.04a9 through Team Win Recovery project v2.6.3.0 it now keeps restarting in recovery and then takes me to Recovery project after a htc logo screen.
This is the first time I have attempted to root a phone and I'm a noob evidently so please go easy on me. (all I wanted was to hook up my bluetooth controller so I can play FF7 with more ease) any help would be greatly appreciated as I've just moved from London to the middle of nowhere and I'm bored out of my mind without my beloved HTC
Thanks a lot Mr. Tickles
Click to expand...
Click to collapse
Try factory reset from twrp recovery and the flash again. Also you can try to download the zip of the ROM again to be sure it is downloaded correctly and try change the twrp version.
You are using an older version of twrp. Try updating it first to the latest version and try flashing your rom again
Get the latest one here
https://dl.twrp.me/m7/
But how do I do that if my phone wont appear in my computer any more?
Its 100% connected to my computer though because its appearing in devices printers but under the name android 1.0
You cannot enter in fastboot mode? If you can, then you flash recovery via fastboot
ticklemelee said:
But how do I do that if my phone wont appear in my computer any more?
Its 100% connected to my computer though because its appearing in devices printers but under the name android 1.0
Click to expand...
Click to collapse
@istribo is right, to flash arhd you need at least twrp 2.6.3.3 or newer (latest version is 2.8.7.0) To update your recovery, make sure you have HTC drivers installed on your computer and also uninstall htc sync if its installed (but do not uninstall the drivers). Download your new twrp .img file from the link istribo posted above, save it in the same folder where you have adb and fastboot installed on your computer. Reboot your phone in bootloader / fastboot usb mode. Open a terminal window from your adb/fastboot folder and use these commands to flash the recovery:
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
fastboot reboot-bootloader
Then reboot in recovery and flash arhd.
Note that you should also have a 7.xx.xxx.x firmware installed on your phone if flashing Android 5.0.2 Sense roms. You can know your firmware version with the command "fastboot getvar version-main"
My phone wont appear in my computer so how am I supposed to copy over the files...
sorry guys I'm going to need a step by step guide made for an idiot lol
ticklemelee said:
sorry guys I'm going to need a step by step guide made for an idiot lol
Click to expand...
Click to collapse
If you press power button and volume down button it gets you into recovery. Then u choose fastboot and the you do what alray said.
right so the fact my phone wont appear in my computer doesn't matter then?
Okay sorry for being silly I've just read that properly. Problem is when I got to install adb/fast boot it says something like incorrect parameter 'sheppard'
ticklemelee said:
Okay sorry for being silly I've just read that properly. Problem is when I got to install adb/fast boot it says something like incorrect parameter 'sheppard'
Click to expand...
Click to collapse
Download the sdk tools here (fastboot and adb): https://developer.android.com/sdk/index.html#Other
Download and install HTC drivers: http://www.mediafire.com/download/k7trah995whrw0d/HTC-Mobile-Driver_v4.16.0.001.exe
Connect your phone to a USB 2 port directly from your computer (no external usb hub, better to use back ports, not front ports)
Reboot your phone in bootloader mode by holding power and volume down. When in bootloader, make sure you see the red "fastboot usb" caption, if not select the "fastboot" option using the vol up/down and power key to enter. Once "fastboot" option is selected, make sure you now see the red "fastboot usb" caption.
Open a terminal window from your sdk tools folder
Type "fastboot getvar all" without the quotes en hit enter
copy paste the output here so we can see it (but do not post your IMEI/Serialno)
Then update your twrp:
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
fastboot reboot-bootloader
Sorry I forgot to say I got my phone all working and rooted! Thank you all so much for your help! wouldn't of done it without you guys.
Hi, recently I owned my HTC desire 626s but when I was unlocking bootloader and rooting accidentally I broke the system and now sends failure messages all time. could someone make a clean rom stock backup and upload it for flash it?
Could use one too
AlexLeonVader said:
Hi, recently I owned my HTC desire 626s but when I was unlocking bootloader and rooting accidentally I broke the system and now sends failure messages all time. could someone make a clean rom stock backup and upload it for flash it?
Click to expand...
Click to collapse
This would also help me out as i accidentally deleted os while trying to reset with twrp.
Lol... Back up is 5gb.. Not only that, TWRP for this device as of now has bugs and will break root after nandroid restore. Download RUU from HTC website put RUU in adb folder and put phone into download mode. Thru adb type in "fastboot oem rebootRUU". Run RUU on PC (DO NOT UNPLUG USB). Process takes about 10-15mins so be patient and your phone will be back to stock.
I tried it and it finished way to fast. The device is not in adb devices. After accidentaly trying to reset thru twrp now my device wont show up untill i boot into twrp. Any idea of whats wrong. I have the right files in the same location as adb. I have the updates htc drivers for my device.
After typing fastboot oem rebootRUU all i got was a silver htc logo with a security warnig about non htc roms.
f1tzg3r4ld said:
I tried it and it finished way to fast. The device is not in adb devices. After accidentaly trying to reset thru twrp now my device wont show up untill i boot into twrp. Any idea of whats wrong. I have the right files in the same location as adb. I have the updates htc drivers for my device.
After typing fastboot oem rebootRUU all i got was a silver htc logo with a security warnig about non htc roms.
Click to expand...
Click to collapse
Yea ur on the right path. Now open RUU file and let it load and execute on your PC and it should restore stock metro rom. Process takes awhile so be patient
kdayyy said:
Yea ur on the right path. Now open RUU file and let it load and execute on your PC and it should restore stock metro rom. Process takes awhile so be patient
Click to expand...
Click to collapse
After I run ruu.exe for my device nothing happens. I let it sit for an hour. I think I can get this fixed but after accidentally deleting things with twrp tryign to reset now my device is not recognized by adb. I reinstalled the stock recovery thinking that might help and it didnt. I was able to get the rom.zip extracted from the ruu. Do you know what steps I would take to install the rom with the stock recovery. Or do you know how I can reinstall twrp. This phone is about to get thrown against the wall. Its my stupidy for nopt backing up before trying to reset.
f1tzg3r4ld said:
After I run ruu.exe for my device nothing happens. I let it sit for an hour. I think I can get this fixed but after accidentally deleting things with twrp tryign to reset now my device is not recognized by adb. I reinstalled the stock recovery thinking that might help and it didnt. I was able to get the rom.zip extracted from the ruu. Do you know what steps I would take to install the rom with the stock recovery. Or do you know how I can reinstall twrp. This phone is about to get thrown against the wall. Its my stupidy for nopt backing up before trying to reset.
Click to expand...
Click to collapse
Put ur phone in download mode if adb can detect in twrp than it should detect in download mode. It's not gonna show on ur PC that it's detected. Just connected and see if adb work in download mode. Same process download mode and type in "fastboot oem rebootRUU" when it goes to silver HTC logo screen open RUU and run it on your PC make sure you have metropcs RUU
---------- Post added at 09:51 AM ---------- Previous post was at 09:36 AM ----------
Stock recovery doesn't do anything. And why are you extracting RUU? It's not meant to be extracted but to run and execute on adb thru PC
kdayyy said:
Put ur phone in download mode if adb can detect in twrp than it should detect in download mode. It's not gonna show on ur PC that it's detected. Just connected and see if adb work in download mode. Same process download mode and type in "fastboot oem rebootRUU" when it goes to silver HTC logo screen open RUU and run it on your PC make sure you have metropcs RUU
Click to expand...
Click to collapse
I have the stock recovery now and cant figure out how to put twrp back on the phone. Ok put it into download mode and ran
C:\HTC626s>adb devices
List of devices attached
C:\HTC626s>fastboot oem rebootRUU
...
OKAY [ 0.053s]
finished. total time: 0.054s
C:\HTC626s>
as you can see adb doesnt recognize the device. Once the ruu starts the install sheild it loads, I accept terms of the licence and hit next, Then nothing happens. It just sits on ther silver htc logo screen and the ruu installer never shows back up.
https://drive.google.com/file/d/0B7_8Xh6NIsIPOUxFbXNEcnZzTlE/view?usp=sharing
https://drive.google.com/file/d/0B7_8Xh6NIsIPQVkya19vSlBpTmc/view?usp=sharing
When I was trying to reset my phone using TWRP i selected everything and hit wipe. Thats how I got into this mess. Does that tell you anything.
f1tzg3r4ld said:
I have the stock recovery now and cant figure out how to put twrp back on the phone. Ok put it into download mode and ran
C:\HTC626s>adb devices
List of devices attached
C:\HTC626s>fastboot oem rebootRUU
...
OKAY [ 0.053s]
finished. total time: 0.054s
C:\HTC626s>
as you can see adb doesnt recognize the device. Once the ruu starts the install sheild it loads, I accept terms of the licence and hit next, Then nothing happens. It just sits on ther silver htc logo screen and the ruu installer never shows back up.
https://drive.google.com/file/d/0B7_8Xh6NIsIPOUxFbXNEcnZzTlE/view?usp=sharing
https://drive.google.com/file/d/0B7_8Xh6NIsIPQVkya19vSlBpTmc/view?usp=sharing
Click to expand...
Click to collapse
It actually is detected because ur cmd says "<C:\HTC626s>" meaning it's in adb mode and connected. Make sure RUU file is in adb folder. The RUU takes awhile to run. And window will disappear after proceeding, and will run in the PC background and takes approximately 10-20 mins. Took a good 15 mins for me and I don't have the best PC
---------- Post added at 10:17 AM ---------- Previous post was at 10:05 AM ----------
f1tzg3r4ld said:
I have the stock recovery now and cant figure out how to put twrp back on the phone. Ok put it into download mode and ran
C:\HTC626s>adb devices
List of devices attached
C:\HTC626s>fastboot oem rebootRUU
...
OKAY [ 0.053s]
finished. total time: 0.054s
C:\HTC626s>
as you can see adb doesnt recognize the device. Once the ruu starts the install sheild it loads, I accept terms of the licence and hit next, Then nothing happens. It just sits on ther silver htc logo screen and the ruu installer never shows back up.
https://drive.google.com/file/d/0B7_8Xh6NIsIPOUxFbXNEcnZzTlE/view?usp=sharing
https://drive.google.com/file/d/0B7_8Xh6NIsIPQVkya19vSlBpTmc/view?usp=sharing
When I was trying to reset my phone using TWRP i selected everything and hit wipe. Thats how I got into this mess. Does that tell you anything.
Click to expand...
Click to collapse
I've wiped everything before. This is my second HTC device. I had a desire510. Either flash a stable custom ROM which 626s don't have any, or run RUU thru adb is your only option.
I figured it out Thansk for your help I had to run cmd as admin and install this
Microsoft Visual C++ 2008 Redistributable Package (x86)
Because you have the wrong ruu download sprint ruu
:angel::angel:
f1tzg3r4ld said:
After I run ruu.exe for my device nothing happens. I let it sit for an hour. I think I can get this fixed but after accidentally deleting things with twrp tryign to reset now my device is not recognized by adb. I reinstalled the stock recovery thinking that might help and it didnt. I was able to get the rom.zip extracted from the ruu. Do you know what steps I would take to install the rom with the stock recovery. Or do you know how I can reinstall twrp. This phone is about to get thrown against the wall. Its my stupidy for nopt backing up before trying to reset.
Click to expand...
Click to collapse
It Works.
kdayyy said:
Put ur phone in download mode if adb can detect in twrp than it should detect in download mode. It's not gonna show on ur PC that it's detected. Just connected and see if adb work in download mode. Same process download mode and type in "fastboot oem rebootRUU" when it goes to silver HTC logo screen open RUU and run it on your PC make sure you have metropcs RUU
---------- Post added at 09:51 AM ---------- Previous post was at 09:36 AM ----------
Stock recovery doesn't do anything. And why are you extracting RUU? It's not meant to be extracted but to run and execute on adb thru PC
Click to expand...
Click to collapse
I created an account to thank you. Your method worked for me. Thank you so much. My device was soft-bricked from wiping with Cyanogen Recovery. I was stressed out all week looking for a solution and finally found your solution that worked for me. Thank you.
kdayyy said:
Lol... Back up is 5gb.. Not only that, TWRP for this device as of now has bugs and will break root after nandroid restore. Download RUU from HTC website put RUU in adb folder and put phone into download mode. Thru adb type in "fastboot oem rebootRUU". Run RUU on PC (DO NOT UNPLUG USB). Process takes about 10-15mins so be patient and your phone will be back to stock.
Click to expand...
Click to collapse
i know this is an old post but ruu for unlocked 626 is not available on its official website