Is there a way to disable your phone going into sleep mode during a call or preferably stop it from going into sleep mode entirely. if you have slide to unlock s2u2, sleep mode is pointless. let me see if i can be a lil more clear...i dont want to have to hit the power button everytime i want to "wake" my phone up. i mean screen shutting down and going black to reserve battery power is cool but hitting a button should be enough, not pressing the power key. and agian i think s2u2 renders this pointless.
You can use Kaiser Tweak or Advanced Config to change you Fast Sleep settings. It is one of the first options. It has been talked about a lot search for it.
-McMex
My finger hurts since I have to press the power button (small and flat) too many times a day to wake the diamond from sleep. you can argue that I can set the phone not to sleep but sleep is a must to save battery. using all keys to wake it up can cause any keys to be easily hit by accident, which drains battery fast too. Power button is meant to be used rarely, like the PC reset button.
is there a better way to wake up the diamond? is it possible to configure ONLY the OK (center) button to do this? like the iphone, you just press the OK button. it is big and does not hurt as much?
How exactly do you keep pressing the power button till your finger hurts?
Vulpix said:
How exactly do you keep pressing the power button till your finger hurts?
Click to expand...
Click to collapse
hit it once does not hurt but every time it go to sleep and I have to hit the button to wake it up. that is when it hurts.
let say I set it to go to sleep every 40 sec. how many time does it go to sleep in an hours? at least couple times.
foxnews said:
My finger hurts since I have to press the power button (small and flat) too many times a day to wake the diamond from sleep. you can argue that I can set the phone not to sleep but sleep is a must to save battery. using all keys to wake it up can cause any keys to be easily hit by accident, which drains battery fast too. Power button is meant to be used rarely, like the PC reset button.
is there a better way to wake up the diamond? is it possible to configure ONLY the OK (center) button to do this? like the iphone, you just press the OK button. it is big and does not hurt as much?
Click to expand...
Click to collapse
I've found that the pressure required on the Power Button can depend on the particular Diamond. I've owned two US Diamonds and the first had a difficult Power Button while the second was much easier. Either way, another option to turn it on is to pull out the stylus a short distance - this will wake the Diamond as well. As far as using the center of the D-Pad - I've no idea . . .
wpsantennas said:
I've found that the pressure required on the Power Button can depend on the particular Diamond. I've owned two US Diamonds and the first had a difficult Power Button while the second was much easier. Either way, another option to turn it on is to pull out the stylus a short distance - this will wake the Diamond as well. As far as using the center of the D-Pad - I've no idea . . .
Click to expand...
Click to collapse
even though using the stylus is less painful but it takes more steps: get finger nail in the gap, pull it out, then push it back in. if you do these steps many time over an hour, it would be tidious task.
On my diamond responsivity of the power button depends strongly on where I'm pressing it. You can try to press it different ways and find out where you get most tactile feedback of the micro-switch. I have the impression that for me it is when I'm pressing from behind, more on the left of it.
You guys are insanely lazy...
Vulpix said:
You guys are insanely lazy...
Click to expand...
Click to collapse
lol i have to concur
I think that would be a very good feature for the phone. I am sure most of us would use it.
C'MON XDA EXPERTS, help us on this one...
foxnews said:
My finger hurts since I have to press the power button (small and flat) too many times a day to wake the diamond from sleep. you can argue that I can set the phone not to sleep but sleep is a must to save battery. using all keys to wake it up can cause any keys to be easily hit by accident, which drains battery fast too. Power button is meant to be used rarely, like the PC reset button.
is there a better way to wake up the diamond? is it possible to configure ONLY the OK (center) button to do this? like the iphone, you just press the OK button. it is big and does not hurt as much?
Click to expand...
Click to collapse
start>settings>system> Key Lock .. then set to "Do Not lock buttons".
then all you need to do is press the centre button to wake the diamond!!
EASY
gtpete said:
start>settings>system> Key Lock .. then set to "Do Not lock buttons".
then all you need to do is press the centre button to wake the diamond!!
EASY
Click to expand...
Click to collapse
Yes, but other keys such as volumn, home, back, answer and end key are also unlocked. Anyway, there are all hardware keys available to press opening the phone in additon to the default on/off button. I am now using this option.
ya but they will complain that all the buttons are unlocked. that method is just TOO easy.
edit: OMG i was right. and too slow. hahaha
maybe next time the phone can get u a beer or work for you...man...
Surely this is the Answer..?
OK, the way I see solving this is to have the phone wait longer before auto-locking.
To sort this, go to the following..
Start\Settings\System\Power\Advanced..
Go to 2nd option - It's a tick Box labelled "Turn off Device if not used for.." and adjust it to suit..
This is found in the manual..?
Cheers,
Phil.
pointless response to a pointless thread...
gtpete said:
start>settings>system> Key Lock .. then set to "Do Not lock buttons".
then all you need to do is press the centre button to wake the diamond!!
EASY
Click to expand...
Click to collapse
well, it´s maybe less a matter of laziness than of speed, my last phone was a slider ... slide, it wakes up, slide, it goes to sleep - superquick
with the diamond it takes one step more:
I use the option "do not lock buttons" in combination with S2U2, most often I press the ok button and slide to unlock
to put the phone to sleep, I press the power button or use gyrator: I just have to turn the phone face down, than the screen goes off (with S2U2 locking)
hm, maybe I should have bought the diamond pro, but diamond is sexier
gtpete said:
start>settings>system> Key Lock .. then set to "Do Not lock buttons".
then all you need to do is press the centre button to wake the diamond!!
EASY
Click to expand...
Click to collapse
all hardware buttons wake the diamond then. at least on mine
And how do you turn it off without the power button?
hgrimberg said:
And how do you turn it off without the power button?
Click to expand...
Click to collapse
http://wmpoweruser.com/?p=982
OMG!!!
What a baby, hurting finger....c'mon!!
Power button switches screen on, same button switches screen off. Job done.
Have you ever hit your finger with a hammer and your nail goes black....That hurts!!!
Is there anyone flash the rom in forum with volume wakeup MOD work well for ONE? The MOD is try to use volume key as power button to wakeup screen.
The mod not work fully in ONE X if phone is under deep sleep so I want to know is it same case for ONE?
I flashed this mod last sunday with arhd and it only works a few seconds after fall to sleep.
Thanks, seem still only can count on power button.
I am running CM11 on my GT-I8190L.
Here is my question. Does "double tap to sleep" have the same effect as pressing the power button? IOW does the power button actually put the phone to sleep, or does it just turn off the screen?
Thanks
a__l__a__n said:
I am running CM11 on my GT-I8190L.
Here is my question. Does "double tap to sleep" have the same effect as pressing the power button? IOW does the power button actually put the phone to sleep, or does it just turn off the screen?
Thanks
Click to expand...
Click to collapse
Put the phone to deep sleep .. if u turned off your screen it automatically go to sleep mode by anyway
a__l__a__n said:
I am running CM11 on my GT-I8190L.
Here is my question. Does "double tap to sleep" have the same effect as pressing the power button? IOW does the power button actually put the phone to sleep, or does it just turn off the screen?
Thanks
Click to expand...
Click to collapse
Its behaviour (should) pretty much reduce the use of the power button. Depending on the kernel and configuration, it might or might not (deep sleep as an addition), but by default it should.
When phone has been asleep for a while and I press the power button to wake the phone most times it only wakes after the 3rd or 4th press, any idea why? button is not worn as it works first time when pressing to put phone to sleep, just the awakening that has the issue. And if I put phone to sleep with power button, and then immediately press power button it wakes the phone on first try, but it seems if the phone has been 'asleep' for a while then it takes 3 or 4 attempts to wake phone, not sure why, thanks
does anyone else have this issue?
Cannot just be me surely??
First use a button tester app to make sure is not hardware related. I so also suggest to do a full reset.
Jostian said:
Cannot just be me surely??
Click to expand...
Click to collapse
Are you on emui? Any deep sleep mods?
Are you rooted?
I've had this when I had AOD on. Could pocket detection be causing it?
Yip think it's some app deep sleep waking issue, will try safe mode and see