Running regaws themed with kernel 2.6.29, which kernel do I need to run setcpu?
You've been here long enough to know that this doesnt belong in Dev.
DirtyShroomz said:
Running regaws themed with kernel 2.6.29, which kernel do I need to run setcpu?
Click to expand...
Click to collapse
The ones from Fresh Toast and Darchdroid are the only ones with setcpu. Or, you could compile his source. The best bet is to just run Fresh Toast.
DirtyShroomz said:
Running regaws themed with kernel 2.6.29, which kernel do I need to run setcpu?
Click to expand...
Click to collapse
for you to run the overcloked kernal u need to the kerrnal by toast but he hasnt publicly realesed it yet look for it today and tomorrow it probaly wont be a update.zip but if you know how they can be made but liliand has plans to use the kernal in his v2.5 rom so just wait a couple days
VinceOB said:
You've been here long enough to know that this doesnt belong in Dev.
Click to expand...
Click to collapse
Sry dude forgot about the q&a
I would say just run Fresh Toast 2.1 Final.. Its amazingly fast.
Also, I recommend overclock widget instead.. Flipz noticed that SetCPU was unnecessarily taking up over 10% of your CPU usage constantly, which doesn't sound like much, but it can add up quickly.
jUgGsY said:
I would say just run Fresh Toast 2.1 Final.. Its amazingly fast.
Also, I recommend overclock widget instead.. Flipz noticed that SetCPU was unnecessarily taking up over 10% of your CPU usage constantly, which doesn't sound like much, but it can add up quickly.
Click to expand...
Click to collapse
+1 Fresh Toast 2.1 w/ OCWidget. Works great for me.
DirtyShroomz said:
Running regaws themed with kernel 2.6.29, which kernel do I need to run setcpu?
Click to expand...
Click to collapse
Just rip the boot.img from Fresh 2.1OC, then implement it into regaws build.
It's actually a lot easier than it sounds.
Decad3nce said:
Just rip the boot.img from Fresh 2.1OC, then implement it into regaws build.
It's actually a lot easier than it sounds.
Click to expand...
Click to collapse
I work from my phone, i just hopped on fresh. Loving it so far
Related
http://developer.htc.com/
Now lets have at this and get some over-clocked under-volted kernels up!
I know bro!!!! I was pumped when I saw Cyanogen comment on twitter that new source code was up I ran over to the HTC site and there it was...the beautiful source code lol
Just in case by some freak of nature something happened to the link I downloaded the source code already lol I have no clue what to do with it I'll just hold on to it for safe keeping.
HeyItsLou said:
Just in case by some freak of nature something happened to the link I downloaded the source code already lol I have no clue what to do with it I'll just hold on to it for safe keeping.
Click to expand...
Click to collapse
Thats good. If the linl ever dissappears, at least we got something.
-jd
Great news! Been waiting forever for this and a new hydra kernel.
Sent from my ADR6300 using XDA App
best news ever. been waiting! glad I checked the forum before going to bed
hell yeah!
Amazing news! I love CyanogenMod but certain limitations kept me from using it, so I switched to sky raider. Anxious to go back to CM6 though. This and s_off soon made my day.
Thank you, devs, for all the amazing work you all put into this phone!
Awesome news. Thanks for the post!
Sent from my Incredible using Tapatalk.
1.Dinc
2.this
3.s-off
4.????
5.PROFIT!!!
what does this kernel entail exactly?
trombone dixie said:
what does this kernel entail exactly?
Click to expand...
Click to collapse
Overclocking undervolted kernels can now be developed for 2.2 roms
PaulG1488 said:
Overclocking undervolted kernels can now be developed for 2.2 roms
Click to expand...
Click to collapse
Please don't shoot me for asking, but I'm extremely new to all of this. What is an example of overclocking undervolted kernels?
trombone dixie said:
what does this kernel entail exactly?
Click to expand...
Click to collapse
basically with this we can now have some great stuff going on
1. CM6 will most likely fully support our phone now
2. we can have UV/OC kernels, which allow our cpu to be faster, while not using as much battery (theoretically)
3. whatever else the awesome devs out there can come up with
4. ???????
5. Profit (of course)
trombone dixie said:
Please don't shoot me for asking, but I'm extremely new to all of this. What is an example of overclocking undervolted kernels?
Click to expand...
Click to collapse
Do a quick Google search for Hyda kernel
Hydra kernels for 2.1 were great, undervolting increased battery life. There are also undervolt overclocked kernels as well from hyda.
If you are running 2.2 don't install a 2.1 kernel.
It is cool that the kernel source is out now, more goodies on the way!
Sent from my ADR6300 using XDA App
While definitely good news, the bad news is that it's the kernel source from the first Froyo leak (7/27), not our current 8/1 version.
Will this help in any way to help fully unlock nand?
seanhassars said:
basically with this we can now have some great stuff going on
1. CM6 will most likely fully support our phone now
2. we can have UV/OC kernels, which allow our cpu to be faster, while not using as much battery (theoretically)
3. whatever else the awesome devs out there can come up with
4. ???????
5. Profit (of course)
Click to expand...
Click to collapse
hell yay!!!
rmk40 said:
While definitely good news, the bad news is that it's the kernel source from the first Froyo leak (7/27), not our current 8/1 version.
Click to expand...
Click to collapse
They might not have updated the kernel between the two versions.
My kernel-fu is weak, or this source blows. Probably the first.
I am merely disabling perflock and compiling. The kernel works, wifi works, and all that, but when the screen powers off, it comes back to a black screen with a lit white line at the top.
*Sigh*
Post and Files Removed because they did not work.
I thought JIT would only work on Froyo? Would this work on any rom?
Edit: also will this work with the different lag fixes that are out there?
Thanks
oquinones said:
I thought JIT would only work on Froyo? Would this work on any rom?
Click to expand...
Click to collapse
Not any more! This is compiled for 2.1
You got a linpack score you could provide us with?
We could use a tested undo as well. JIT for 2.1 on the G1 caused all kinds of problems.
oquinones said:
I thought JIT would only work on Froyo? Would this work on any rom?
Edit: also will this work with the different lag fixes that are out there?
Thanks
Click to expand...
Click to collapse
no if i remeber jit was in 2.1 but wasnt complete so it was never used but in froyo it was complete but needed to be activated. when i was in the 32b section i used jit on all the 2.1 sense roms and it made my phone fly and that was a far more inferior phone than the vibrant so i cant wait to see what this does to our phones!!!
will keep an eye on this one!! pls report if working or not..
Care to source a thank you to creators of JIT so noobs like me can research what exactly this is ;p
phragg said:
Care to source a thank you to creators of JIT so noobs like me can research what exactly this is ;p
Click to expand...
Click to collapse
http://en.wikipedia.org/wiki/Just-in-time_compilation
oquinones said:
I thought JIT would only work on Froyo? Would this work on any rom?
Thanks
Click to expand...
Click to collapse
JIT was announced in alpha quality for 2.0, so I suspect the 2.1 ver is workable. Not necessarily 100% stable (or they'd have released it standard instead of waiting until 2.2) but workable..
I'll prolly give this a shot tomorrow, can't be too bad
Ok thanks for clearing that up guys. Shows how much of a newb I am to Android. This is my 2nd Android phone and my 1st one was a Behold 2...
I am making a backup now and will flash this and report back.
I'm creating a nandroid and installing this now. I'll post up quadrant and linpack scores. I'm currently runnining RyanZA's lag fix, so I'm getting quadrant scores around 2050 right now.
oquinones said:
Ok thanks for clearing that up guys. Shows how much of a newb I am to Android. This is my 2nd Android phone and my 1st one was a Behold 2...
I am making a backup now and will flash this and report back.
Click to expand...
Click to collapse
lol well the behold 2 doesnt count so this is your first real android phone lol j/k but this phone kills the crap out of the behold with a bazooka
kaizasoshi said:
You got a linpack score you could provide us with?
Click to expand...
Click to collapse
This was my Stock Linpack:
2010-08-15 20:47:30 the3dman / Chicago 8.042 SGH-T959 1000.0MHz Samsung/SGH-T959/SGH-T959/SGH-T959:2.1-update1/ECLAIR/UVJFD:user/release-keys
My Linpack with JIT is the photo below.
Not a huge difference according to linpack but things seem to definitely run faster.
the3dman13 said:
This was my Stock Linpack:
2010-08-15 20:47:30 the3dman / Chicago 8.042 SGH-T959 1000.0MHz Samsung/SGH-T959/SGH-T959/SGH-T959:2.1-update1/ECLAIR/UVJFD:user/release-keys
My Linpack with JIT is the photo below.
Not a huge difference according to linpack but things seem to definitely run faster.
Click to expand...
Click to collapse
i dont think linpack can justify anything cause i could get 7.2 constantly on my mt3g running a sense rom with jit and it was ok but no where near as fast as this phone...
the3dman13 said:
This was my Stock Linpack:
2010-08-15 20:47:30 the3dman / Chicago 8.042 SGH-T959 1000.0MHz Samsung/SGH-T959/SGH-T959/SGH-T959:2.1-update1/ECLAIR/UVJFD:user/release-keys
My Linpack with JIT is the photo below.
Not a huge difference according to linpack but things seem to definitely run faster.
Click to expand...
Click to collapse
Thanks for supplying us with this...gonna flash in a bit
cashless said:
We could use a tested undo as well. JIT for 2.1 on the G1 caused all kinds of problems.
Click to expand...
Click to collapse
looks like it only replaces 3 or 4 files:
build.prop
/system/bin/dalvikvm
/system/lib/libdvm.so
/system/lib/libnativehelper.so
so if you want to flash before there's a .zip file revert, just back those up using adb pull or cp/mv before you flash, or just pull them out of a stock rom zip file from the forums
going to flash now..
cheers =)
s0niqu3 said:
looks like it only replaces 3 or 4 files:
build.prop
/system/bin/dalvikvm
/system/lib/libdvm.so
/system/lib/libnativehelper.so
so if you want to flash before there's a .zip file revert, just back those up using adb pull or cp/mv before you flash, or just pull them out of a stock rom zip file from the forums
going to flash now..
cheers =)
Click to expand...
Click to collapse
I didn't bother making an undo on this one because I figured everyone would make a nandroid backup.
12 minutes and still at the vibrant screen how long does it take?
the3dman13 said:
I didn't bother making an undo on this one because I figured everyone would make a nandroid backup.
Click to expand...
Click to collapse
Oh, I'm with you, if people are smart enough to know about JIT and want to flash it, they should be smart enough to backup their phone first. I'm so tired of everyone complaining about not knowing how to use adb, or terminal, and yet wanting to hack their phones. This is the development forum and not helpdesk, right?
nandroid backup almost done, flashing as soon as it finishes, thanks again!
cheers
=)
This is based on the 959d source, hopefully closer to our phones and hopefully better on battery. It's using the same patches as the Dragon kernel posted earlier, speedmod, oc, fast scaling, voodoo sound.
Stock clock: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-v1.0.zip
OC 1.28Ghz: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-OC-v1.0.zip
These should be considered experimental. I have run them both for about an hour, so far so good.
ttabbal said:
This is based on the 959d source, hopefully closer to our phones and hopefully better on battery. It's using the same patches as the Dragon kernel posted earlier, speedmod, oc, fast scaling, voodoo sound.
Stock clock: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-v1.0.zip
OC 1.28Ghz: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-OC-v1.0.zip
These should be considered experimental. I have run them both for about an hour, so far so good.
Click to expand...
Click to collapse
yay. will report back on battery life after some use. i think i need to donate to u now. god ive been stingy lately
Edit: do u have a paypal???
ttabbal said:
This is based on the 959d source, hopefully closer to our phones and hopefully better on battery. It's using the same patches as the Dragon kernel posted earlier, speedmod, oc, fast scaling, voodoo sound.
Stock clock: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-v1.0.zip
OC 1.28Ghz: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-OC-v1.0.zip
These should be considered experimental. I have run them both for about an hour, so far so good.
Click to expand...
Click to collapse
You're the stuff!
ttabbal said:
This is based on the 959d source, hopefully closer to our phones and hopefully better on battery. It's using the same patches as the Dragon kernel posted earlier, speedmod, oc, fast scaling, voodoo sound.
Stock clock: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-v1.0.zip
OC 1.28Ghz: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-OC-v1.0.zip
These should be considered experimental. I have run them both for about an hour, so far so good.
Click to expand...
Click to collapse
Do you have BLN integrated into your kernels?
birgertime said:
Do you have BLN integrated into your kernels?
Click to expand...
Click to collapse
Yes, BLN is available in both of them.
jumaaneface said:
yay. will report back on battery life after some use. i think i need to donate to u now. god ive been stingy lately
Edit: do u have a paypal???
Click to expand...
Click to collapse
I added the donate thing to xda. Thanks for asking.
Can this be flashed over voodoo?
Sent from my SGH-T959
Internal memory not mounting...
The internal memory is not mounting at all. It is not mounted by the phone or by the PC.
Seems like a good idea. Flashing now.
This kernel is injected with voodoo, correct?
Sent from my SGH-T959 using Tapatalk
After I flashed this I soft bricked and could not get back into cwm but I used odin flashable voodoo kernel and everything was fine I'm going to try this again
I used the Dragon kernel from the i9000 source. The OC version never worked, but the non-OC version worked extremely well.
Same issue it appears with the 959d source. i don't have issues with other OC kernels...any ideas why this would be happening?
Dan_Brutal said:
This kernel is injected with voodoo, correct?
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Yes, voodoo is enabled.
ttabbal said:
Yes, BLN is available in both of them.
Click to expand...
Click to collapse
I'm a BLN rookie...how do I enable it? I looked around in recovery and couldn't find it.
Everything working great here. Brillliant work! Thanks for the effort. Oc'ed and voodoo'd...w/nero 4.1
A reminder to noobs, flash with recovery in power menu options.
Sent from my SGH-T959 using XDA App
MTC44 said:
I'm a BLN rookie...how do I enable it? I looked around in recovery and couldn't find it.
Click to expand...
Click to collapse
You should have a BLN Settings app installed with the kernel.. use that.
MTC44 said:
I'm a BLN rookie...how do I enable it? I looked around in recovery and couldn't find it.
Click to expand...
Click to collapse
You need to run the BLN control app. It was supposed to be installed with the kernel. Just open the app and "Activate BLN". If the app wasn't installed for you, you can download it here.
U need a app
MTC44 said:
I used the Dragon kernel from the i9000 source. The OC version never worked, but the non-OC version worked extremely well.
Same issue it appears with the 959d source. i don't have issues with other OC kernels...any ideas why this would be happening?
Click to expand...
Click to collapse
It's probably the type of OC, they aren't all the same. If you have an OC mod that works good for you, and you want to see it in my kernel or any other, you need to get that dev to release the source. Some don't, and I can't reproduce what they do if I don't have the code. This OC is based on a patch from the i9000 forums, it works, but is less universal than some of the others on Vibrant hardware.
For the record, my source is posted here: https://github.com/travistabbal
I'm uploading the source for the 959d kernels now.
Great work
I think u actully did it with this one, the battery seems to be way better then the last 2.7 kernel. Im running oc and voodo
im on di11igafs 5.2 newest rom with Firebirds newest kernel flashed. I want to switch to SetrioNs kernel here for some good overclocking. I am unsure which to use and what the difference between his normal and XT versions are. i tried flashing the newest 1.6ghz XT SetrioNs but it freaked out my phone even in recovery menu after 20 seconds it would freeze up after about 20 seconds. Do i need to disable the lagfix in the recovery menu and or something else first? any help would be greatly appreciated . Thanks
Bryan
Your phone is not going to do 1600 no matter how hard you try.
newter55 said:
Your phone is not going to do 1600 no matter how hard you try.
Click to expand...
Click to collapse
/facedesk
Thats not what I asked about nor did I try to set it at 1.6 ghz. The phone wouldnt even boot long enough for me to change the voltage control settings. So I suppose i should rephrase my question so I dont get another answer like this one. I would like to use SetrioNs kernel, im using Firebirds kernel right now. Are there any steps i need to take in order to properly flash setrions kernel so that i dont have the problems I had previously?
newter55 said:
Your phone is not going to do 1600 no matter how hard you try.
Click to expand...
Click to collapse
Party pooper.
I know right? Woot woot.
Ok, sorry man. Honestly I would suggest downloading the Paragon rom and yanking the kernel out of that. It is much more up to date and allows oc.as high as 1.6. I have used that one without issue. Haven't tried setirons in quite a while so I don't know what may be going on.
Easiest way is to just put the rom zip in your sd card then use sgs kernel flashed app and select the rom zip. It will extract the kernel and flash it for you. Might want to disable lagfix first as sometimes problems occur when jumping back and forth between firebird and others.
Use voltage control 3.0 to control that kernel as well.
newter55 said:
Ok, sorry man. Honestly I would suggest downloading the Paragon rom and yanking the kernel out of that. It is much more up to date and allows oc.as high as 1.6. I have used that one without issue. Haven't tried setirons in quite a while so I don't know what may be going on.
Easiest way is to just put the rom zip in your sd card then use sgs kernel flashed app and select the rom zip. It will extract the kernel and flash it for you. Might want to disable lagfix first as sometimes problems occur when jumping back and forth between firebird and others.
Use voltage control 3.0 to control that kernel as well.
Click to expand...
Click to collapse
Ah! Thank You Thats exactly what i was looking for. I only have one question left. If i pull the kernel out of the rom will it be in .tar form? Thanks again
The kernel will be zimage. You can just copy that file straight to your sd card and the kernel flasher app will work with that as well.
Also it would seem that paragon is now using speedmods kernel. would you happen to be able upload the kernel you are using for me?
Give me a few.. have to get off the couch
here you go: http://dl.dropbox.com/u/11343737/zImage
Kernel from ParagonRC4
newter55 said:
Your phone is not going to do 1600 no matter how hard you try.
Click to expand...
Click to collapse
I got my phone OC to 1600 it was awesome...My screen couldn't handle it though. It froze
Stephenxda said:
I got my phone OC to 1600 it was awesome...My screen couldn't handle it though. It froze
Click to expand...
Click to collapse
you are lucky, usually they melt
What are you talking about here. I have my phone oc at 600Mhz and it works just fine. It is very stable and I have no issues with it.
newter55 said:
here you go: http://dl.dropbox.com/u/11343737/zImage
Kernel from ParagonRC4
Click to expand...
Click to collapse
Hey man thanks alot
no problem....sorry the humor in my original post didn't come through
newter55 said:
no problem....sorry the humor in my original post didn't come through
Click to expand...
Click to collapse
Haha not a problem. It just seemed like any post i made today i was getting sarcastic answers XD
Doom Kernel V0.3
Apparently on the Xperia forums DooMLord has a kernel out called DooMKernel as well. This is in no way affiliated with that. I may change mine to Doom Boot or Doomed Kernel but for now he asked me to make a note like this so here it is.
First, I would like to give a big THANKS to Echts for helping me with repacking the boot.img and get this thing bootable...
Second, THANKS to tekahuna for the OC modules
This kernel contains OC and non OC versions. Speed tweaks, memory tweaks and network tweaks have been included after V0.1. All the non OC versions include all the tweaks.
V0.3 Now increases SDcard read write cache from 128kb to 4096kb
I appreciate any feedback I can get from this. It will work with ANY FROYO rom this is NOT a GB kernel.
How to install:
1) Download
2) Flash in CWM
3) Enjoy your OC kernel
Doom Kernel V0.3 http://www.multiupload.com/ZK4A77GW6D
No OC V0.3 http://www.multiupload.com/DFHEJI7H2I
Doom Kernel V0.2: http://www.multiupload.com/GXIC7IOXH6
No OC V0.2: www.multiupload.com/ZQ6501RZMX
Doom Kernel V0.1: http://www.multiupload.com/MI9ZF4YOU0
Stock Kernel: http://www.multiupload.com/DM2PKFCNSV
CHANGELOG
V0.3 Added SDcard Read/Write speed increase
V0.2 Added lowmemorykiller settings
Added ADJ tweaks
Added Network tweaks
Tweaked Wifi supplicant scan settings in kernel itself
No more lags when installing apps from market.
V0.1 Stock Kernel with OC at 1.18GHz
I tip my hat to you sir. Looking forward to tinkering with kernel code and working on optimizations along the way.
What's the maximum overclock rate? 1.5GHz?
Will thus also work on Thriller rom?
Sent from my LG Thrill 3D using XDA Premium
itskapil said:
What's the maximum overclock rate? 1.5GHz?
Click to expand...
Click to collapse
Nooooo as of right now, testing tekahuna's modules, 1.23Ghz was as far as I could push without reboots and FC's.
Sorry forgot to mention that. Right now it is at what tekahuna calls the sweet spot of 1188MHz or 1.18GHz. That is the max as this is just a test speeds will increase slowly. Other tweaks and features will be added slowly.
Cthater said:
Will thus also work on Thriller rom?
Sent from my LG Thrill 3D using XDA Premium
Click to expand...
Click to collapse
Yes it will work with any of the thrill roms should work with O3D roms as well AS LONG AS IT IS FROYO this will not work on GB it is a froyo only kernel. Any rom in the Thrill development section will be fine.
How did you manage to get the boot.img repacked? I started trying to use mkimage instead of mkbootimg but to no avail. I have tinkered with all the different settings. Basically I'm just curious what you put for -a , -e , -d , and -C , because I can't get mine to repack. Also, how did you order the various inputs. Because, I just keep getting a usage output. And when I don't get that and it seems to run, still no new boot.img is created.
Thanks.
Sent from my LG-P925 using xda premium
I will be writing up a nice tutorial here soon. You have to edit unpack-bootimg.pl and like you said the mkimage command has to be just right. Once you get it down the unpacking and repacking is a snap takes no time. It's the adjusting things and what not that becomes the most work.
Beta version 0.2 now contains OC at same clock speed (will release different clock speeds once testing phase is done) also has adjustments to lowmemorykiller, adj, network speeds. Slowly but surely moving along don't want to do too much at once just tweaking a bit then test, tweak a bit more then test. Safest route.
Thank you!
Word. A good how to is definitely needed for working with the Thrill Boot.img. I figured that it couldn't be too difficult. I just feel like i have tried every possible combination for the repacking. But im sure i am just missing something simple. Im assuming the Unpack edit is to change the initial data stripping from 2048 to 76? For now im gonna just include your boot.img that you posted here in my rom im working on (as long as that is cool with you...).
Props to you though for figuring it out...
And thanks to Echts and others for their assistance...
Thanks dude!
So glad that the thrill development scene is finally starting to take off!
Please do, anything I release is free and open to use. That's why we are here right?
And I didn't figure the repack out, it was armcee (sp?) Ricardo that figured it out, he just merely passed the info down the line it finally made it to me lol I actually gave credit to Echts over on O3D forum because he passed the info on to me.
I have to say, the V0.2 kernel definitely speeds things up. Apps run faster, load faster, it's nice... very nice. This is what I have been waiting for, kernel tweaking.
How is the battery useage with the kernel?
Sent from my LG-P925 using XDA App
Great, im so happy to see some dev for this phone. A big thank you to everyone! I just flashed the kernel, so far so good.
Sent from my LG-P925 using XDA App
ueshada said:
How is the battery useage with the kernel?
Sent from my LG-P925 using XDA App
Click to expand...
Click to collapse
Its kind of hard for me to tell because I have been flashing a lot of things. For what I am doing it seems to last a while. Try it out if you don't like it flash back to stock.
Testing the new Kernel, so far i love it, running SetCPU to keep tabs on CPU... Excellent job @Urabewe
cant wait to see if we can get more frequencies to test the OMAP4 processor... make this phone FLY!!!
nice kernel man but Battery drain seems a little high. well it is a no brainer when OC it take more battery power
Yes it's still a work in progress I did notice a bit of extra drain, I am going to release another kernel that's is not OC but contains the speed boosts. I'm hoping that will cure a bit of the battery problem while still keeping the what I think is incredible speed boost.
Also, can anyone else confirm that the delay/lag while installing apps from the market is basically gone with governor on hotplug max at 1188? I have installed about 5 apps and was trying to see how bad the lag was and didn't really experience any.
Well it's official I am calling it a feature... no more lags when installing from market. Phone remains nice and smooth. This kernel combined with Doomed Froyo Slim (which btw includes this kernel in the rom) has no lags and if you can find any lags in any programs or with the launcher let me know.
...fighting ninjas at night, talkin' about this and that.
Urabewe said:
Well it's official I am calling it a feature... no more lags when installing from market. Phone remains nice and smooth. This kernel combined with Doomed Froyo Slim (which btw includes this kernel in the rom) has no lags and if you can find any lags in any programs or with the launcher let me know.
...fighting ninjas at night, talkin' about this and that.
Click to expand...
Click to collapse
Is this kernel working with optimus 3D 2.3.5?
Urabewe said:
Yes it will work with any of the thrill roms should work with O3D roms as well AS LONG AS IT IS FROYO this will not work on GB it is a froyo only kernel. Any rom in the Thrill development section will be fine.
Click to expand...
Click to collapse
No Froyo only
It will work with ANY FROYO rom this is NOT a GB kernel.
Click to expand...
Click to collapse
No froyo only.
Not being rude at all but please read through at the very least the 1st post before asking questions. 2.3.5 is GB this only works with 2.2.2 I will be releasing a 2.3.5 GB kernel soon that one you will be able to use.
...fighting ninjas at night, talkin' about this and that.