when i call someone and that someone is on a call with another person, i should get a message saying that the person is on a call so that i'd know that he is busy with another call ..
Would appreciate if anyone can be of help here.
t_assal said:
when i call someone and that someone is on a call with another person, i should get a message saying that the person is on a call so that i'd know that he is busy with another call ..
Would appreciate if anyone can be of help here.
Click to expand...
Click to collapse
Who says that you should receive a notice as to what the other person is doing when you call ?
t_assal said:
when i call someone and that someone is on a call with another person, i should get a message saying that the person is on a call so that i'd know that he is busy with another call ..
Would appreciate if anyone can be of help here.
Click to expand...
Click to collapse
yes, but that doesn't have nothing to do with your phone. It's a provider's (vendor/operator) service. And only some of them support it
Actually @t_assal is correct, he meant if I call a guy who is calling someone else and this guy is activated the call waiting function, I have to get a message "waiting" and then you decide to continue disturbing him or to hang up.
Also @papo is correct that his is an operator thing.
But the problem that the operator send me back this waiting signal, and neither my iPhone nor my Nexus one shows this message, but my 10 years old Nokia show it. the same sim card used in the three phones for this test.
Which means the waiting signal which sent by the operator "maybe only Mr. t_assal's and mine" is not recognized by neither iPhone nor nexus1 (also winmo)
We need a solution
nightcap79 said:
Actually @t_assal is correct, he meant if I call a guy who is calling someone else and this guy is activated the call waiting function, I have to get a message "waiting" and the you decide to continue disturbing him or to hang up.
Also @papo is correct that his is an operator thing.
But the problem that the operator send me back this waiting signal, and neither my iPhone nor my Nexus one shows this message, but my 10 years old Nokia show it. the same sim card used in the three phones for this test.
Which means the waiting signal which sent by the operator (maybe only mine and t_assal's) is not recognized by iPhone nor nexus 1.
We need a solution
Click to expand...
Click to collapse
we need to make clear about this. Just to make post short and spare my brain waves, I supposed (wrongly?) he messed it up and is referring to sms which called party get after finish his call.
That's the service I've wrote about.
It's handy if you are off, turn phone on and receive message from Bob, but it's automated and saying he tried to call and you can hit call back btn. In some countries/operators it's common.
Why would I want a message saying Bill is busy on call, 5 secs after I hear beep beep from the line? But yes that would be phone function and it's possible to handle. It's a network message, nokia is showing them by default (and can't be turned off!!!! :-S )
Make an application showing message such as this is possible and there could be one. Just what the purpose?
Though there is one useful info there. After active call ends, phone will receive network message containing code, which describes reason of ended call: red button by called, caller, lost reception (out of coverage or battery), network error, network busy
If you often make people angry over line and they hang on you, with this cell code you can have an monthly statistic of upset people or whatever you want. aah just cant see any reason to have this eather
run windows\fieldtest.exe and check it there, that's good enough.
sorry to hear ppl who thinks they know it all and says bull****..
The fact is clear, whe u call some one who has HIS call waiting service active UR phone MUST indicate U the other person call status. that's what call waiting means. usually "call on waiting.." or something, but STILL ringing and the othrer person hears some indicator beep or someting , and HE desides to take the call or not.
the bug is Iphone 3gs, 4g (and nexus aparently) don't show this message "call waiting" like ALL other phones, in my case, OMNIA II, nokia, (with the same SIM card) shows the msg.
please don't coment if u dont know and PLEASE lowercase and regular font. NOOBS.
sorry for my bad english.
sorry to hear ppl who thinks they know it all and says bullSt.. the fact is clear, whe u call some one who has HIS call waiting service active UR phone MUST indicate U the other person call status. thas what call waiting means. usually "call on waiting.." or something, but STILL ringing and the othrer person listen some indicator beep or someting and he desides to take the call or not.
the bug is Iphone 3gs, 4g (and nexus) don't show this message "call waiting" like ALL other phones, in my case, OMNIA II, (with the same SIM card) shows the msg.
please don't coment if u dont know and PLEASE lowercase and regular font. NOOBS.
satanm said:
sorry to hear ppl who thinks they know it all and says bullSt.. the fact is clear, whe u call some one who has HIS call waiting service active UR phone MUST indicate U the other person call status. thas what call waiting means. usually "call on waiting.." or something, but STILL ringing and the othrer person listen some indicator beep or someting and he desides to take the call or not.
the bug is Iphone 3gs, 4g (and nexus) don't show this message "call waiting" like ALL other phones, in my case, OMNIA II, (with the same SIM card) shows the msg.
please don't coment if u dont know and PLEASE lowercase and regular font. NOOBS.
Click to expand...
Click to collapse
Who's the noob? You double posted and no this isn't a fact, I've never had a phone tell me when someone is on a call. There are some carriers that have a tone at the end of the ring to let you know they are on another call..
I think you are confusing your words, your phone should alert you (the person getting the call) that someone is calling you while on another line, it's not the other way..
Provide some info stating other wise that isn't half ass typed like the **** you are posting.
Yes it's true I had this problem since i started using PDA phones only (HTC Mda compact, then HTC Tytn 2 and the HTC HD2), I think problem only exists when using PDA phones because ''call waiting'' function is working on my all other symbian phones like (Samsung, Nokia, .... with symbian)
It might be with Windows mobile phones not sure, but don't know if there is any fixing for this specially for HTC HD2 ..
thanks
Related
Don't know if this is Kaiser only, but since I'ts a kaiser thats giving me grief here goes...
We're using a mobile switchboard and as part of the group answering our main phonenumber I'd really like to be able to transfer calls with my Kaiser...
Normal phones (as in my last Nokia E61i as well as my N95) gives me the options to park the current call, dial my colleague and then "transfer".. I can't find this option on my Kaiser..
Is this option not available in WM6 or is it HTC that has "removed" it? Or perhaps, is there a thirdparty software to help me with it
Go to Start / Settings / Phone / Services / Call Forwarding.
I'm talking about call transferring not call forwarding..
Transfer = I answer the call, call another contact & transfer it to him..
Forward = all my calls go to another contact and/or number...
Can I push this up, cause I'm desperatly looking for this function on the kaiser.
Maybe there's some addon or a special key combination to activate call transfer on the htc kaiser?
yep - this is possible but is network dependent.
you need to put the call on HOLD.
call your colleage/2nd party.
CONFERENCE the call (so you and 2 callers can hear each other)
then YOU hang up - they are left connected and chatting (but at the expense of YOUR bill!!!)
Hope this helps you.
firstbuddha said:
yep - this is possible but is network dependent.
you need to put the call on HOLD.
call your colleage/2nd party.
CONFERENCE the call (so you and 2 callers can hear each other)
then YOU hang up - they are left connected and chatting (but at the expense of YOUR bill!!!)
Hope this helps you.
Click to expand...
Click to collapse
Thanks for the answer! I will try this when I'm back in my company.
The costs are no problem because we call each other in the company for free and the call transfer is only needed to redirect customers to the right contact but I think it's a long way round when there could be a simple option in the menu (like hold and conference). Every other mobile I know offers a direct way to do this (either a menu item called transfer or by pressing a number).
firstbuddha said:
you need to put the call on HOLD.
call your colleage/2nd party.
CONFERENCE the call (so you and 2 callers can hear each other)
then YOU hang up - they are left connected and chatting (but at the expense of YOUR bill!!!)
Click to expand...
Click to collapse
Tested it and it doesn't work. It simply quits the complete conference.
Again, maybe there's a special dialer which supports it or some kex combination to press.
I really need this feature!
Solved!
So here's the way it works on wm devices:
Get the first call and put it on hold.
Make the second call and press the number 4 followed by the green phone button.
The second call is now transferred to the first and you are finished.
Great thanks to my phone provider ONE who came up with it!
Nice find! Does not work on my Q-Mobile 1.2 Tilt with AT&T.
I get "cannot conference calls"
I contacted AT&T and they said there is no way to do it.
I did read that if your call comes in using a Google Grand Central number you can transfer it using Grand Central specific codes.
Later, Lew
lewcamino said:
Nice find! Does not work on my Q-Mobile 1.2 Tilt with AT&T.
I get "cannot conference calls"
I contacted AT&T and they said there is no way to do it.
Click to expand...
Click to collapse
Yes, it's a "feature" that your Phone Provider must support in order to use it.
I get "cannot conference calls".
I know for a fact that the same sim when used in my old v v old ericsson r380 world phone allows me to conference multiple people.
but my kaiser (running stock) says the above message.
how can i conference calls? the phone looses part of its utility value if I am unable to use this feature. someone got any tips/ tricks for me?
p.s. i initiate both the calls...
conference call is not the same as call transfer!
You can start a conference as described by firstbuddha a few posts ago in this thread (you just shouldn't hang up if you want to stay in the conference). There's also a menu item for conference call.
If you use my method with pressing 4 and the green phone button you are trying to transfer a call which is only possible when your phone provider allows it.
When you are calling someone that has another call (Call waiting), your PPC do not show in a notification or beep that the second party is having another line.
This is available on any very basic symbian phone.
Is there a cab to fix that?
Share a solution if you have one..
This is a feature from your carrier.... Call waiting works just fime on my Kaiser
rohanmaini said:
This is a feature from your carrier.... Call waiting works just fime on my Kaiser
Click to expand...
Click to collapse
Call waiting works fine on my Kaiser as well.
The carrier here has this option.
This is not the problem though.
The problem is when you call someone up from a PPC and that party has another line.
You should get a beep or a visual notification showing that the person you are calling has another line (my call is waiting on his phone).
So, if someone has a solution for this; please share.
Ok what I think your talking about is when you call someone that is on the phone, you hear a quick beep indicating that they are on the line, correct????
If this is what you are talking about, YES it is carrier specific. For example, when I call my father on Verizon and he is on the phone with someone else, after each ring there is a small beep. This is telling me that he is on the line.
There is nothing you can do to the Tilt to change this, it is carrier specific.
True... and there are also some PBX systems that provide the ring/beep when you are the call waiting. It usually depends on the phone system of the person you're calling.
fireblade63 said:
Call waiting works fine on my Kaiser as well.
The carrier here has this option.
This is not the problem though.
The problem is when you call someone up from a PPC and that party has another line.
You should get a beep or a visual notification showing that the person you are calling has another line (my call is waiting on his phone).
So, if someone has a solution for this; please share.
Click to expand...
Click to collapse
I think that is carrier specific too.. if I am calling some someone who is busy on another call, I get a completely diff to ringing tone.. Infact in most cases I get a audio message that the person I am calling is busy on another call and I should wait or call back later... Atleast thats what we have on all major carriers here in India...
ok we know that carrier has to support it, i know t-mobile does...
i used an old nokia to check and it works, it beeps and the whole screen says CALL WAITING, then it starts ringing...
i haven't seen any Windows Mobile touch screen or not that can do this
so its a carrier thing, yes t-mobile supports it.. windows mobile doesnt support it though!!!
so there is no way to make a .cab or something to fix this problem
It's not broken so how can you fix it? It's just not a feature that is offered.
it is not about the carrier. for instance when i had a nokia, when the other party was on the phone i had a beep in my phone, but with the WM devices, you cannot see that you call is waiting.
I have been looking for this since I first started using Windows Mobile.
Unfortunately, most of the softwares out there (because they are not built into the ROM) can not reject calls without the other side knowing. I have tried every software out there, all of them are the same, the caller will hear a ring, or part of a ring, then they will get a busy signal (rejected).
I can't believe this is hard to create, I use to have it 12 years ago in my BASIC alcatel phone. When a black listed caller dials, they get nothing .. or get an out of coverage message from the operator. I believe the way it worked, is that the phone detects the caller number, BEFORE responding that it has acknowledged the call and is ringing.
I guess that is why I am saying that it is built in to the ROM as a driver or something, and not just a software.
Any Ideas, thoughts, where I can find this, anyone WILLING to make it ?
I know there are some recent roms being created that has the call blocking feature built in. i'm using one those roms, which is indicated in my signature. when u mentioned that you've tried them (call blocking applications) all, were they free and/or commercial apps, or apps created in the development/hacking section? Collectively speaking, there's alot of those types of applications floating out there, but maybe you've already tried those.
pheroah said:
I have been looking for this since I first started using Windows Mobile.
Unfortunately, most of the softwares out there (because they are not built into the ROM) can not reject calls without the other side knowing. I have tried every software out there, all of them are the same, the caller will hear a ring, or part of a ring, then they will get a busy signal (rejected).
I can't believe this is hard to create, I use to have it 12 years ago in my BASIC alcatel phone. When a black listed caller dials, they get nothing .. or get an out of coverage message from the operator. I believe the way it worked, is that the phone detects the caller number, BEFORE responding that it has acknowledged the call and is ringing.
I guess that is why I am saying that it is built in to the ROM as a driver or something, and not just a software.
Any Ideas, thoughts, where I can find this, anyone WILLING to make it ?
Click to expand...
Click to collapse
1st off, change your number
if that doesn't suite your needs make a fake dial tone which states your number is not in service as your voicemail while using call firewall. after a few weeks the person will give up calling you. Callers will receive one full ring and it will go to your new fake voicemail after blocking them, which they will perceive as your phone being turned off or changed your number.
common sense now pay me.
hahahah nice one .. except the keyword here is UNDETECTABLE ... if they know i changed my number or i am blocking them, they will find me and ask for the NEW number ....
As I said before, the only device I saw that feature on, was the really old alcatel models; which didn't give you a ring, didn't give you a busy tone, probably just ignored the request coming in from the telco when it is one of the black listed numbers.
Nice try, but I would pay you, if you could do the same on windows mobile. By the way I was testing an alpha versio of the cruise before it was launched, and it actually (accidently) opened the speaker, before you actually picked up the phone call, so the other side could hear you, before you even answer.
Thus, I am sure these things are possible, if there is someone who has the knowledge, and power to play with the operator
I haven't tried anything comercial, didn't find what i was looking for. If you know of any comercial software or freeware that does what i am stating. i.e. doesn't ring before it blocks the call. That would be great
I have something called MAGICALL, and it works great. You can set it to pick up then hang up, however the best part is that the call doesnt "come through" or let the phone ring. Unless you specify the software to give you a pop up message indicating it blocked a call. I love it since it doesnt even let the phone ring, its like if you never got called.
Same thing, I already tried MagiCall and it rings once to the caller, and then disconnects. Very obvious that you are avoiding the person.
I currently use a free voicemail feature called YouMail, which has call filtering and call blocking features. You can block calls (I believe) and also create a unique voicemail greetings for those you want/trying to avoid as well. www.youmail.com
I also use magicall for this. As an action I choose 'ignore' and then the caller just hears the phoen ringing, the connection is not broken. And you, well you hear and see nothing so you are not disturbed. Is that not what you want/?
Not exactly, ignore is a nice feature if you dont' want to be disturbed, but if someone is constantly bugging you; you would like them not to even reach your phone (so they don't come next day in the office, and say I left you three missed calls, and you didn't answer me).
It would be easier if they just got a this phone is out of coverage (or something similar) from the operator; then you can always blame the operator, that they couldn't reach you ... you get my drift ?
Yeah, I get your drift. But, if you're not reachable, then I guess it's the provider that sends back a message to the caller. I don't think your phone can send that message to the caller.
Moreover in most cases if you're not reachable then the caller also gets sent to your voicemail and he can also leave a message and come to you next day asking why you didn't react to his voice messages.
So the only option would be to send a message back saying that the number doesn't exist. But again, you would have to be able to spoof a provider based message for that.
I see these options when a caller really wants to get hold of you and you don't want to react:
* drop the call after 1 ring: caller notices he gets dropped, gets pissed an comes to see you
* send message back saying you're out of coverage: caller leaves message, which you ignore, caller gets pissed and comes to see you
* send a message back saying that the number doesn't exist: caller inquires whether you changed number, finds out you didn't, gets pissed and comes to see you
* silently ignore him: caller leaves a message, which you ignore, caller gets pissed and comes to see you.
Seems you're screwed either way
Why not simply answer the call and tell the caller to f*ck off. He's bound to get pissed also but at least he'll leave you alone and you'll feel relieved.
Well for one, I don't use voice mail ... secondly, because it is the provider that sends the message, it is authentic....
So if your mobile ... somehow ... ignores the call coming from the provider ... the provider sends a message saying that the mobile is out of coverage ...
pheroah said:
hahahah nice one .. except the keyword here is UNDETECTABLE ... if they know i changed my number or i am blocking them, they will find me and ask for the NEW number ....
Click to expand...
Click to collapse
Hmm, you're asking for someone to develop a piece of software because you have no spine? I know of no Java/.Net/etc API that is better than the truth. Tell the person to leave you be. The currently available call firewalls work great for when you need to be in a "Call Free Environment."
It has nothing to do with my spine; and I currently have NO ONE harasing me; but I believe that the current Call firewalls have a disadvantage, and lack a feature.
I wish there was someone in XDA-Developers who is willing to spend some time to make some adjustments to one of the ROMs to have this built in. Especially as this feature is available in historic phones that have a lot less features than a WM.
Im also using Magicall for this & its working great, the other party doen't even hear a ring. It has many other features too.
Hi Before I purchased my Kaiser i had a Sony Ericsson phone, my old phone gave me a signal when the person I was calling was handling another call. This is not happening with my Kaiser, anyone know of an application that can make this on the Kaiser or can anyone develop one? (I know it still working because I just test it with my old phone)
Thanks
Bump, Anyone?
as far as i know, if you call a person who is busy on another line, my network plays a prerecorded female voice that says:
"The number you have dialed is busy on another line. Please wait."
i had a cheap-ass motorola phone and this is what i heard. after upgrading to the kaiser, i hear the SAME THING, nothing more, nothing less.
what i mean to say is that MAYBE the sony ericsson was doing something propriatory that might not be considered a "standard feature" and therefore the kaiser (and my previous cheap-ass motorola and countless other basic bare bone phones i've used) doesn't include it.
HOWEVER, when I myself am on the phone and someone calls me, the kaiser beeps/rings/vibrates (depending on the sound profile and settings) to indicate i have a call waiting.
ASCIIker said:
as far as i know, if you call a person who is busy on another line, my network plays a prerecorded female voice that says:
"The number you have dialed is busy on another line. Please wait."
i had a cheap-ass motorola phone and this is what i heard. after upgrading to the kaiser, i hear the SAME THING, nothing more, nothing less.
what i mean to say is that MAYBE the sony ericsson was doing something propriatory that might not be considered a "standard feature" and therefore the kaiser (and my previous cheap-ass motorola and countless other basic bare bone phones i've used) doesn't include it.
HOWEVER, when I myself am on the phone and someone calls me, the kaiser beeps/rings/vibrates (depending on the sound profile and settings) to indicate i have a call waiting.
Click to expand...
Click to collapse
ASCIIker I Completely understand what your saying, when you call someone that is busy on another line your carrier gives you a message saying that the caller is busy on the other line and to wait, in my carrier it doesn't happen like that, you get the same tone as if the caller its not on another call, so that's why this tools is handy at least with my carrier, In my case it goes like these, it rings and in the middle of the first ring it gives me a tone(and also shows a message saying "caller busy"), with my kaiser it doesn't do it.
Thanks for the reply
Anyone??? Bump
Ok guys.....I can't be the only one this has happened to. For the last week I have been getting somewhat random calls and caller id shows its my number. There are times when I happens right around a phone call but the phone has had root for 6 months...multiple roms flashed and never an issue till now. Running crc1 with cyan 4.0.4 build...themed with community hero. This is the second post about this....does someone know what's happening or how to fix it...thanks
its called someone is spoofing you with a spoof app of some sort heres a website about what its about.
basically youre being pranked
Here's the website
I appeciate the insight but I have that app and as far as I am aware you can't call a number with the same number.....it won't allow it. So I'm pretty sure that's not it.
Umm i dont think you understand completely.
Ok ....now I know its the phone ....noticed a pattern...it seems to do it right after someone calls but only rings a couple of times. And I'm not sure what it is I don't understand.
oneyoungjay said:
Ok ....now I know its the phone ....noticed a pattern...it seems to do it right after someone calls but only rings a couple of times. And I'm not sure what it is I don't understand.
Click to expand...
Click to collapse
Say Dave doesn't like Jay and wants to prank call him.
He uses SpoofApp or the equivilant service to call him.
To use this service all you need to do is enter the number you would like to call and the number that you would like to show up on the recievers callerID.
Jay recieves a call from the number that Dave put in.
It could be just about any number and the only way that I know of for sure to tell who it is that's calling you is TrapCall.
Hope that clears it up.
Ya I hear you on that and I have used it......I'm not stupid. This is a phone issue. The calls are comming after a voicemail is left. What could the problem be. I'm not trying to be a jerk but the obivious solution is not allways the right one. Could someone give me an idea.
I agree with you oneyoungjay I have that app to and you can't put the number to call and the number to display at the same time. It will not allow it. I use the app pretty often.
My iPhone used to do this to me on t-mobile a few months ago, just like voicemails sticking, i solved it by leaving myself a voicemail. (and its actually a carrier issue, i believe)
try changing voicemail client to phonefusion for example. If its a carrier issue that should bypass it if not sorry...
Thanks .....ill try that a let you know if it worked.