Database Develop

[Solved] SPL issue stuck.....

First off...
G1 PVT 32B
recover img1.4
new radio 2.22.19.26I
intalled hard spl, in recovery img after installing hard spl phone rebooted to recovery then at the bottem said formatting cache:.... stuck there for 15 mins so I tried Alt S to reboot, After that it gets stuck on G1 screen. I can still get back to recovery. should I try to redown load spl, is it possible I got a bad download or did I do some else wrong

maybeoneday said:
First off...
G1 PVT 32B
recover img1.4
new radio 2.22.19.26I
intalled hard spl, in recovery img after installing hard spl phone rebooted to recovery then at the bottem said formatting cache:.... stuck there for 15 mins so I tried Alt S to reboot, After that it gets stuck on G1 screen. I can still get back to recovery. should I try to redown load spl, is it possible I got a bad download or did I do some else wrong
Click to expand...
Click to collapse
first boot into bootloader(camera and home) and see if you have a white screen with 3 skating androids.
if you do then you have the hard spl.
sometimes when you flash a spl it will wipe your phone.
if you do have the hard spl just go ahead and flash whatever rom you want to use.
if you don't have a card reader go into the recovery console and type ums_enable to mount your sdcard and put the rom on your sdcard then type ums_disable to unmount the sdcard, then finally type reboot recovery and when it boots up flash your rom.

That did it David just uploaded CM 4.0.4 and its up and running. You have been alot of help tonight, kick you a little something for your help...

wait , you push alt-s, are you still using the orignal recovery, do yourself a favor and flash cm recovery 1.4, nandroid backup and restore, flash any zip.

maybeoneday said:
That did it David just uploaded CM 4.0.4 and its up and running. You have been alot of help tonight, kick you a little something for your help...
Click to expand...
Click to collapse
thank you very much

Thanks!!
I was having the same issue... ( I have the pimped recovery as well)
The first couple times I tried, I was getting no changes to the spl...
I tried one more time, wiped to be sure, proceeded to install spl
I then made it to same point, "formatting cache..."
I decided to start the reboot process and quickly pressed
"cam + power" when the screen went black and BAM,
got the 3 skateboarding androids
and it says "HSPL 10.95.3000"
I then reinstalled latest Cyan, and partitioned the sdcard with sdparted.txt
8gig Class 6 (100MB Swap, 1024MB ext4, 6893 Fat32)
Rebooted and
Thx!!

I am trying to unroot my friend's G1... I found a tutorial on XDA (link) and it worked fine without any problems on my phone, however when I go into recovery mode (CyanogenMod v1.4+JF) and I hit Alt+S, it starts to install the update.zip and it reboots and starts up in recovery and gets stuck on Formatting CACHE:... I've let it sit for quite a while and still nothing. I can reboot the phone, but it just starts back up in the rooted mod. When I start into the bootloader (camera+power), it's not the three android's on skateboard, it's the colored screen, and it doesn't give me the option to install DREAIMG.nbh file. I'm not quite sure what to do, especially since I had absolutely no problem testing this tutorial on my own phone.
EDIT: I figured out that the bootloader is downgraded and working. Now when I load the bootloader, it goes to the grey screen and says Loading... No image found! I have searched the forums and google for a solution to this program and so far nothing I've found is working. I've reformatted my SD card many times to FAT32, as well as redownloaded the DREAIMG.nbh file... Any help would be great!
EDIT 2: I'm not sure what the problem was or what I did to get it to work, but after formatting over and over and downloading and redownloading, and trying different SD cards, it finally started to work.

Ok. I have done everything that was suggested up above. I also get the 3 android skateboarders and I have tried to install the new
[ROM] CyanogenMod - Keeping You Legal For Less (STABLE) [UPDATED 10/31 - v4.2.3.1]
Which installs just fine. But then I reboot the device and it continues to be stuck on the G1 Splash Screen.
I can verify that I updated the Radio first and confrimed it was updated then updated the SPL and got formatting cache and waited like 15 mins and then now I am stuck.
So I what david1171 suggested and still nothing.
Any suggestions would be nice.
Thanks

[RESOLVED] G1 hangs on boot, with lots of extra info

I have a G1 with CyanogenMod 1.4 recovery and the original SPL. It boots into either of those just fine.
When I select to apply any zip, I get the list of possibilities. I have tried wiping many times.
Whenever I choose an option from the recovery or flash something, a message appears that says
Code:
E: Can't read MISC:
(No space left on device)
This occurs even after a wipe. Also, I know that the SD card is not full or corrupted (I generally use it in a different G1).
After I have flashed something and reboot, it simply hangs at the G1 boot screen. I left it for half an hour, and it stayed that way.
Any thoughts?

what are you trying to flash? rom might require danger spl. i don't have a g1, so i'm not positive, but i'm willing to bet on it.

I actually tried flashing the danger SPL. In spite of saying "reboot to complete installation," I know it does not work. if I hold Camera as I turn on, it is still the original SPL.
Next bet?

tal82k said:
I actually tried flashing the danger SPL. In spite of saying "reboot to complete installation," I know it does not work. if I hold Camera as I turn on, it is still the original SPL.
Next bet?
Click to expand...
Click to collapse
1.33.2005 is what the danger spl shows up as, which i believe is your "stock" spl. if you installed it and rebooted without any errors it works. simple and plain.

Does the danger SPL look like the original (RGB color testing)? That is what shows up when I boot with camera pressed.
I was trying to flash either Super D or CyanogenMod, when I follow the instructions for either of them and do the final reboot, it never leaves the G1 logo screen. Yes I know that it is a while for the dalvik-cache to be reworked.
I have flashed roms successfully many times on my other G1.
I am very curious what the error message that I posted earlier means. Thanks for your suggestions!

Sorry for the double post. I have an update. I am pretty sure there is a problem with the NAND chip or something similar. I flashed the Amon_RA recovery, and it worked. I used Amon_RA to wipe, and re-partition the SD card. I then tried flashing the HTC 1.6 image for ADP1. And it worked. It booted into 1.6 with no problem (except that I no longer had root). So I tried to get root again. First I tried the Recovery Flasher app. It said that it failed. So I downloaded the DREAIMG.nbh to get back to RC29. When I ran it, I got
Code:
DREAIMG.nbh - FAIL
Update Terminate
UPDATE FAIL
Any thoughts are appreciated. Thanks!

[RESOLVED]
UPDATE: Apparently that last bit ended with bricking the phone. I took out the SD, put DREAIMG.nbh back on it. Put it back in the phone. Re-flashed from the SPL (holding camera while pressing power). It worked. I then went through with regular rooting, putting Amon_RA on there, with Super D 1.8. Everything smooth. I have no idea what really fixed it, but everything works fine.

tal82k said:
UPDATE: Apparently that last bit ended with bricking the phone.
Click to expand...
Click to collapse
i still lol every time i hear that. phixed my brick.

Yeah.... I wish my brick would go into SPL.

*sorry double post, browser messed up*

Bricked G1?

New to G1 and have a problem. Bought a G1 and it came with elcaires rom I think it was.
So I downloaded UK RC7, renamed it to Update, and placed it on the root of my card.
Held the home and power button, and tried to install but I'm getting installation aborted each time. I've also tried to wipe, but that gets aborted too.
I rebooted and now its stuck on G1 screen
I hope somebody can help, had the phone an hour and I've mucked it up already.
Thanks in advance

Im also "bricked" at the loading screen, i turn it on and it gets frozen at the tmobile screen. Home+power, camera+power, Alt+L etc dont work.
Is this fixable?

sirlewis said:
Im also "bricked" at the loading screen, i turn it on and it gets frozen at the tmobile screen. Home+power, camera+power, Alt+L etc dont work.
Is this fixable?
Click to expand...
Click to collapse
No. It's Not.

if its not than what should he and i do?

Are you trying to boot into recovery while its in the G1 screen?

yo my name is sammy as well and i swear i just did the same thing with my g1 on eclair. hit me up dude on [email protected]. we can try and help each other out. plus i love the uk man. i never been, but plan too very soon. i love the music and the accents of the women, oh god. hit me up bro!

If you cannot access recovery or bootloader, you have a rather expensive paperweight. If you can, then you have hope.

AroundTheWorld said:
If you cannot access recovery or bootloader, you have a rather expensive paperweight. If you can, then you have hope.
Click to expand...
Click to collapse
It is not so expensive since it be can brought for less than 100>$$
You can fix it by replacing the board with one from a working phone which is not the easiest thing to do.

hey ill take one of those paper weights... I need a new screen...

in the same boat cant get into anything hung up on splash screen

maybe our only option is jtag, ive never bricked before i always put cm 4 then go and install cm5 above that and it worked but this time it told me to go kick rocks and and and it was a customers phone so i gave him mine which is running eclair.

you guys arn't bricked. If you can turn on the phone than your perfectly fine.
You just gotta learn how to use it

G1 hanged at white screen!
Hi all,
I really need a help here. I have a G1 rooted with CM rom ver5. it was working fine since 3 months but suddenly now the phone doesnt boots up, it goes to white screen with 3 droid skaters and highlight on Hboot. It is freezed then and nothing can be done. I removed battery and tried booting by home + power ; camera+power etc etc . nothing happens it goes to that screen only. i have amons recovery and also nand backups in sd card. but the system doesnt let me go any where!! Please help......
attached is the snapshot

Either your back-button hangs, or something messed up your phone completely.
But as long as you have the fastboot mode, it's not bricked. I would suggest you to clean everything, i.e.
Code:
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
and then flash recovery again, i.e.
Code:
fastboot flash recovery <recover.img>
After that you can boot into recovery and restore your latest backup.
Please note: fastboot is a command you execute on your PC and you have to connect your phone with USB to your PC.
If after that procedure your phone boots again into hboot, most likely your back-button is defect.

I myself I think got a bricked G1...
I first installed many custom roms and thought that they were slowing my g1 so I wanted to get my g1 back to normal... For that I googled and was gone to the htc official website and ported the radio and rom from there but unfortunately I read it somewhere and it said that the rom is for only developers phone.
Everything first went very good... no error on clockwork recovery but when I reboot my phone, it got stuck on T-mobile G1 logo screen? I now can not even go to recovery mode or in fastboot mode? I need help...
Someone told me to use odin multi loader? but how do I use it or do it?? I need some instructions?
What should I do now? All I want to do right now is to get rid of my g1 by fixing it and selling it at once!!!

before flashing radio, spl, rom...anything...u need to check out the warnings and compatibility-MUST!!!!
there are 32B and 32A devices...both have different stuffs for themselves....which can be bricked if u dont follow the guidelines and try to act in sort of a haste to accomplish something new!!!
for those who can get to the camera+power (hboot) screen, but cant do anything else...u need to format ur sdcard...FAT32...then download dreaimg.nbh file...keep it in the root of ur sdcard...
then boot into the hboot menu, and ur phone should read the dreaimg.nbh file and prompt u to take an action(flash it)....do that and it'll get ur phone to the stock rom thingy....
then later u gotta root ur device again(telnet, great)....then install amon ra's recovery...change radio and what not and play again....
u gotta be patient...that's the only thing!!!
check this too
http://code.google.com/p/android-roms/wiki/Get_Root

HTC Dream Boot Issues

Hello. I am new to the Android scene, just came over from the iPhone scene. Sooo. i got my Android G1 today and it came with Super D firmware, if i remember correctly it was 1.6. I wanted to go back to stock, so i downloaded the stock firmware and placed it in the root of a freshly formatted 4gb SDHC card. It installed and then prompted for reboot. I rebooted and i have left the phone on trying to get it to boot into OS but to no avail. I tried booting to recovery screen but i didnt get any menu and had to key alt+l in my keyboard. I did a wipe and rebooted. Still couldn't boot up. Holding the Camera and power button gives me this :
DREA110 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Serial0
Any ideas?
EDIT: Just realized for god's sake, i flashed the RC29 firmware when i was supposed to flash the RC7 one. F***. Now i need to find a way to flash back. Any ideas?

First thing to do is read everything two times... including the FAQs... too many noobs have bricked their devices... Thus dettering them and anyone they talk to from committing to Android... Take your time research and watch a vid first...

Nah, i just screwed up. Didnt know why i went to flash RC29 anyway. Gonna get a goldcard tomorrow with the help of someone. Then i can get pass the error of flashing another firmware.

Okay, so i got a gold card and reflashed the RC7 image and it booted. Done everything including rooting but i cant install the radio as i cant get into recovery. If i hold home + power button i will boot into fastboot mode. Why.
Apparently telnet wasnt flashing the img file properly.
EDIT: Now getting stuck at the Nexus One X Android Screen in a loop.
EDIT 2: Did a reboot. Now all is good. ^_^

[Q] Can i bring my bricked G1 back to life?

Hello, and welcome myself to this wonderful forum.
Let me introduce myself:
My name is Mish , im a 100% dumbass
Also BIG! thanks for sh1tty cyan's wiki about flashing with dangerspl.
Let me tell you my story:
In a cold night, a boy tried to update his G1 to android 2.2 , updated dreaimg.nbh , rooted the device, installed recovery image . that boy was so excited his 1st android, his 1st up mod.
but that boy was upset, didnt wanted to get his update.zip installed because of the status 7 error. well done , he just looked into the cyan's bloody wiki and he found the magic archive called Danger SPL.
flashed it , rebooted it and stucked into G1 T-mobile Splash screen .. he was like . ah , allrite, i'l reboot and enter to recovery mode . but he cannot do that.
He was so anger . he kissed his keyboard with 2 gently strikes. and searched for hours for solutions but nothing found.
I dont have pages to write the whole story. Aka the end.
in other words, can i get my device working or should i give him wings to fly straight on the garbage can ?

Can you get into fastboot mode? Also i think in the instructions it tells you to flash the radio first. I could be wrong but several people have successfully rooted their device with the instructions given here on xda. Welcome to xda btw.
John

Hello John, i can't enter to fastboot mode or i dont know , it shows me just the T-mobile G1 Splash screen and nothing more, tried with Camera + Power, Volume + Power, Home + Power and still nothing . if you have any hints please share, regards.

Can you reboot holding back and power and get into fastboot?

nope , is stucked in G1 splash screen

I did the same thing and had the same problem - had to replace the motherboard. There is NO WAY to fix it except to replace the mainboard. Good Luck

Is my phone a goner?
I wasn't trying to root or modify my phone in any way. It started flickering and then went black. Now...
Phone does not power on. Not with power button or any combo (camera+power; home+power; etc).
No LED notification. Not even orange when charging.
Eventually starts in tri-color/rainbow/RGB Bootloader ON ITS OWN (no keystrokes). Sometimes after 1 min, sometimes after 20+. Once in Bootloader, it stays there. If it's plugged in and charging, the Bootloader stays on even after battery pull.
Bootloader says:
DREA100 PVT 32B
HBOOT-0.95.0000
CPLID-4
RADIO-2.22.23.02
Sep 2 2008
Serial0
Reformatted SD card and installed original SPL (renamed install.zip) and DREAIMG.nbh to the SD's root. When my phone eventually started in Bootloader (on its own), it went into the install phase, completed, and asked for reboot. I pressed the trackball (action button), it rebooted, and hasn't done a thing since.

mish12 said:
Also BIG! thanks for sh1tty cyan's wiki about flashing with dangerspl.
Click to expand...
Click to collapse
Cyan's wiki is one of the most well written, organized and constanly updated around. Don't blame wiki for something that you did.
Take a look at http://wiki.cyanogenmod.com/index.php?title=DreamangerSPL#Flashing_DangerSPL, how can anyone miss this?
Congrats on your new paperweight.

DUBsays said:
I wasn't trying to root or modify my phone in any way. It started flickering and then went black. Now...
Phone does not power on. Not with power button or any combo (camera+power; home+power; etc).
No LED notification. Not even orange when charging.
Eventually starts in tri-color/rainbow/RGB Bootloader ON ITS OWN (no keystrokes). Sometimes after 1 min, sometimes after 20+. Once in Bootloader, it stays there. If it's plugged in and charging, the Bootloader stays on even after battery pull.
Bootloader says:
DREA100 PVT 32B
HBOOT-0.95.0000
CPLID-4
RADIO-2.22.23.02
Sep 2 2008
Serial0
Reformatted SD card and installed original SPL (renamed install.zip) and DREAIMG.nbh to the SD's root. When my phone eventually started in Bootloader (on its own), it went into the install phase, completed, and asked for reboot. I pressed the trackball (action button), it rebooted, and hasn't done a thing since.
Click to expand...
Click to collapse
Do you have access to another battery? I would try that first. This is not a software issue, if new battery doesn't fix it... you may be better off getting another G1 of CL or Ebay (I hear of folks picking them up for less then $50 nowadays)