I can't figure out why there isn't a thread on this in the Accessories section of the forum. Those crazy Euro guys have a few threads on this topic and we have none.
Well, be it Zagg, Clear-Coat, Lexerd, BodyGuardz, etc? Is there a comprehensive comparison out there somewhere? All I ever see from Google searches is forums with everybody saying something different and defending their single purchase.
I think almost everything is going to end up being more subjective when it comes to these.
I have used many kinds in the past and each time I get a new device I always order a Phantomskinz.
I only wish they offered just the screen part in matte, but for under $8 for two skinz shipped I have found it to have the best clarity and feel.
I am horrible at putting protectors on and something always goes wrong, but even with the little imperfections I don't notice them when using the device.
Like the Boxwave - they have both crystal and matte. Like it because it fits the tMobile version perfectly and there is protection for the entire front glass surface including around the bottom surrounding the buttons. Have had them before on all my touch and non touch screen phones. You do have to be careful when applying to avoid bubbles but it can be removed and reapplied again and again.
best screen protector by far to me is the Clarivue screen protector. http://cgi.ebay.com/2-x-Clarivue-Sc...ewItem&pt=PDA_Accessories&hash=item1c1323f296
I've used it on all of my phones, ( htc dash, tilt, g1, fuze, and now my hd2) all came in a two pack, with a screen cleaning wipe, no adhesive, self clinging, I won't buy anything else.
Invisible Shield from Zagg
Second time I've used 'em. First time was on my Samsung Behold and it actually increased the touch screen performance.
Just got the full coverage on my HD2 last night. Still trying to get used to it. It's definitely more "grabby". Seems to make your fingers stick to the screen, which in turn activates an unwanted app or link. It's only been a day and I'm sure it will smooth out and become more responsive. It did for my Samsung. It will give the back of your phone a gloss look, which I don't care for, but it won't get scratches when it sits in my pocket or slides across my dash. It will fell less slippery in your hands too.
Pricey but worth it in the end. If anyone is considering it, PM me, I think I have a discount code floating around in my email somewhere I can pass on.
Hope that helps.
Why do you want a screen protector? the screen is scratch resistant. I watched my TMO sales rep attack it with the end of a pair of hardcore scissors and not a scratch on the demo model.
jammer5150 said:
Why do you want a screen protector? the screen is scratch resistant. I watched my TMO sales rep attack it with the end of a pair of hardcore scissors and not a scratch on the demo model.
Click to expand...
Click to collapse
Several peeps from this site have said that they have gotten scratches on their HD2 screen. But yeah, I've seen the videos, but never tried it myself. I still use a screen protector just in case.
I think the Zagg are too thick and dont like the "orange peel" effect they give. I tried a few different brands and have nothing but great things to say about Clear Coat. Easy to install too. I take mine back once a month just to get a replacement whether it needs it or not. They replace no questions asked every time. No hassle. My favorite so far.
Clear Coat
BW UltraClear from Brando
My current phone is an Xperia, and I'm using the BW UltraClear. I've had it on my Axim and iMate Jam as well. It doesn't have a grainy look, and it works great with my stylus. I ordered one last week in preparation for the HD2, and another one for my gf's iPod Touch. The cheap screen protector is messing up her touch response.
i still have yet to find a good one...cheap ones are crap with touch responsiveness, good ones wear out quick
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Skinomi TechSkin: a bit daunting to put on, uses a "wet water" solution, worked fine on the first try. Screen cover is a little thicker and more "grabby" than I expected. Touch & pinch thru the film is fine, not as good as no protector at all. Transparency is excellent.
Microthin dry-transfer film: easy to apply, to re-apply, and to replace. Much thicker than the Skinomi. Touch thru the film is fine, but pinch operations take a little getting used to.
Stock coating (no after-market cover): Great touch, no scratches in 2 weeks' everyday use. If Seidio or someone comes out with a good, soft-lining face-in holster, I'd skip the screen skin.
just recieved the vikuiti screen protector and despite all the rumours of it not fiting the tmobile u.s. version because of the 1.5mm difference...i can confirm that it fits perfectly and fingers glide smoothly across the screen on my phone...even covers under the buttons unlike many other protectors...they also come with warranty...if it doesnt stick or starts to come up they will send out a replacement for no charge...or so they say...havnt had to try it yet...cost a little over 10 dollars and arrived in 5 days from HK to US
also the capdase hard silicone case works great with our version as well...just off slightly off at the bottom by the microphone but people can still hear just fine.....very snug and not feeling loose...it keeps the contour of the phone on the back which i like and it still keeps the phone slim...totally transparent...covers the camera in the back so it can be left on a table without suffering any scratches to the chrome bezel or the camera lens...looks sweet...cost is $13.40 shipped and arrived in 5 days from hong kong
Kind of a gamble but for me it worked out perfectly and exactly what i was looking for..
I must have sticky fingers because I have a hard time sliding my finger across the glass. Kind of a pain because I love Swype. So, the question for me is which protector is the slickest?
Any suggestions?
Thanks!
scrn protector
the ones from tmobile 2 pk>matte>cheap 15 bucks>very sensitive>minimal smear>can't beat them> no bubbles>very durable> enuff said can handle anything u throw at it
web3221 said:
the ones from tmobile 2 pk>matte>cheap 15 bucks>very sensitive>minimal smear>can't beat them> no bubbles>very durable> enuff said can handle anything u throw at it
Click to expand...
Click to collapse
it doesn't cover the entire screen.
scrn protector
it covers the entire viewable screen, it does not cover part of the black area which is not important and accounts for less than 3/4 of a square inch.
i guess it's a matter if preference, i do not see this as a deal breaker, as it does what it is intended to do and its inexpensive and matte - good for me - maybe u will find one more to your tastes
I picked up the Vikuiti DQC-160 for a TMOUS HD2 and I can confirm it fits perfectly, despite being manufactured for the Euro version. From what I understand the TMOUS version is about one millimeter taller, but it must be in the bezel and not the screen.
Applying the protector was effortless, has no orange peel effect, and essentially feels like I'm touching glass. I'm very happy with it thus far.
scrn protector
CHUCK it looks and sounds nice
http://www.protectionfilms24.com/screen-protectors/hd2-19753.html
jammer5150 said:
why do you want a screen protector? The screen is scratch resistant. I watched my tmo sales rep attack it with the end of a pair of hardcore scissors and not a scratch on the demo model. :d
Click to expand...
Click to collapse
+1
.
scrn tektor
to each his own, but i would rather be safe than sorry, plus my work is, at times a little more demanding than most jobs. and these phones are not inexpensive, nor do they give them away - if they did to heck with it lets rock and roll
Related
is it seidio all the way?
looking for really good protection. want to keep my hero pristine
so, was looking @ the seidio innocase 2 and screen guard. any other suggestions or am i on the right track?
invisible shield
Love mine and wouldnt use a case or sleeve ever again. The only caveat is that it requires 12-24 hours to dry and set. Totally worth it though.
Seidio + Zagg shield = Ultra protection!
...was having a problem picking between the 2 so i use both
i use just the seidio holster and no other screen protection. I've never dropped my phone or put it face down on anything and I have zero scratches on the phone what-so-ever.
I occasionally find my phone in my pocket with my keys and loose change and still haven't notice anything more than a few finger print smudges that can be wiped clean. It's amazing having a phone with a glass face. Every other touchscreen phone I've had untill this point has had a "hard plastic" face and scratched fairly easily.
I had the zagg's on my other phones and I really don't prefer the image quality and texture of the touch screen after applying it. But to each their own. As far as cases/holsters I swear by seidio a million %, and if I liked the screen protectors I'd swear by zagg as well.
I'm a Zagg user. I've been using them since my Mogul. I can agree/say that when you first put it on the feel it gives you is offputting. You go from a super smooth screen that feels like an ice rink to one that is a little bit more sticky. It's not as easy to slide your finger across. However over time it dries up a bit more and you get used to it. The trade off for me is I beat the crap out of my phone and have never even damaged the shield, let alone the phone itself. I had one on my TP for a year before selling it and when I peeled it off the thing looked brand new. I believe that ghost armor advertises that theirs isn't sticky like "others". Or that may have been another company. I don't remember.
Every phone I've had before this one, I've put a case and InvisibleShield on it. When I bought my Hero, there were no cases/screen protectors available yet, so I had to make do without one. I eventually just forgot about getting one, and I've had mine for a month now with the only flaw being DUST UNDER THE SCREEN!! But yeah, since the screen is glass, it takes a lot more to scratch it than a plastic screen, and I've found that whatever the body of the phone is made of doesn't scratch very easily, or maybe it just hides them good. Either way, I don't drop my phones, put them near keys etc., and I don't let my friends hold my phone. I always tell them that if they drop it and break it or something happens, I'm not using my insurance on it (they're paying for it haha).
I haven't used the Seidio, because I think it looks 'cheap' from the pics I've seen floating around on Android Forums...
I bought the silicone skin from Handhelditems.com for $5 (approx) and besides the attraction of lint from my pockets, it works GREAT. I've accidently dropped my phone from about 5ft on tile, and with the silicon skin it just bounces.
I'm still looking out for a good full body case, but they have been hard to find.
just an f.y.i. the Seidio case is about the best case I have had on a phone. It fits like a glove and it very durable, thin and is smooth to the touch.
pictures don't do the case any justice in my opinion
I use a Boxwave Designio leather case (vertical flip) its great, it doesnt interfere with typing, the screen is protected at all times, I highly recommend it
http://www.boxwave.com/products/dlcase/sprint-hero-designio-leather-case_3718.htm
i ended up going with the seidio case and the boxwave anti-glare screen protector. it is supposed to be good... i still may get some sort of leather protection. i DO drop my phone... haha, you should see my touch... it's actually held together well with all the times i've dropped her!
oh and THANK YOU for all the suggestions, really appreciate it.
anyone know the best protection that will prevent screen breakage??? Cause my last hero fell like 6 inches and broke the screen, I dont think invisishield will help with that...
Currently I have a zagg invisibleshield and the htc silicon case.
The zagg at first didn't seem that great, but if you get it put on correctly (use the solution generously) it is very nice after it completely dries.
Only complaint I have with the zagg is that somehow even with all the preventive measures I still got a few small hairs underneath it, but only on the screen. They do have a lifetime warranty and I might try to utilize it to get a brand new front piece.
It is a bit sticky on the screen compared to the glass but really it isn't that bad at all. It becomes much more slick once it dries.
As a note on the toughness of the glass screen, I saw a video on youtube with a guy who took a razor blade keys and coins to a screen protector. After, he removed the protector and did it on the bare glass and he saw no scratches, nor were any apparent in the video.
As for the htc silicon, fits fine with the zagg on the device, but the silicon attracts tons of dust and fuzz. This still concerns me as I really want the dust kept away from the phone because my last phone got significant dust under the screen.
And a final note, the zagg does not protect the bottom edge where screen meets phone, and this is where my first developed dust under screen. The pieces are claimed to be cut perfectly but they really are not the exact dimensions of the device, leaving that space open. I actually cut off a very thin strip from the leftover material and laid it in that space, just to make sure.
Doesn't look super great, the little piece I stuck in, seeing as it is pretty hard to cut a piece that small, but I am more worried about keeping my phone dust-free than having the shield look perfectly invisible.
Can't complain about lifetime guarantee though, if they are reasonable with it.
anyone have a leather pouch they prefer?
Check out Boxwave's Designio case. Its not exactly a leather pouch (as in you take the cellphone out of the ouch to use it) but its great protection. I bought a PDair and didn't like it because it was hard leather and it interfered with typing a lot. But this Boxwave case is way better as it doesn't interfere with typing, and the whole phone is covered all the time while not in use.
(See the vertical flip because the horizontal flip doesn't protect the phone against falling from the top of the case, happened to me with the PDair cover I had and I was so PISSED OFF; you buy an expensive case, thinking your phone is greatly protected and it fell because of it).
i think this one is the one you mean (bottom)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
looks nice. right now i have a verizon droid eris leather horizontal case and it is a little tight... i'm a little worried it pushed in my send/call button a little. i am probably just being paranoid though! i just can't tell how much it is supposed to stick out LOL
I use the Body Glove 2pc Snap Case and Invisashield. If you need a holster also, stay on your current track.
is the seido case for the hero all around even screen protector? i saw the video for innocase for other blackberries that cover everything, even comes with a silicon keyboard of their phones, but when i look at the hero pics of the case it doesnt look like it
from what i understand it does not protect the screen.... it covers the back, and the sides...
Just ordered BodyGuardz from amazon for my hero.
But I don't get even my hero and BodyGuardz.
When I get them, I'll post the review.
Hi everyone, I just bought a Xperia X1 and this is my first post on the forum so be gentle
I'm really enjoying my X1 experience, so I don't want it to suffer any harm. I haven't got any screen protector yet, so it has never got out of home. Or is in my hand or is in the case where it comes, so I'm going nuts to take it out of home with me, so I really need help choosing a good screen protector.
This is my first touchscreen cell phone and I realised that is very easy to the screen to get a awfull grease "skin", so I would like to make my choose on 3 characteristics:
1) less fingerprint friendly than the screen
2) quality picture not very different from the one without screen protector
3) usable at direct sunlight
After a lot of search I' thinking of one of these products:
Bodyguardz Full Body
The screen is optical clean, has a good touch feeling and is made of anti-scratch/sel-healing material. From what I read it prevents fingerprints/smugdes a bit, but I don't have any ideia if that bit would be good enough. I'm also worried if it is usuable at direct sunlight.
SGP Shield
This pack comes with a clear protector. I'm a bit afraid of this tipe of screen protectors because they usually smudge too much. Once again I'm worried about it's usuability at direct sunlight.
Steinheil Steinheil Anti-Fingerprint
I'm a bit divided about what to think on this one, as I read both good and bad things. They seem to act good as anti-fingerprints, but it seems they are hard to use under direct sunlight.
Brando PDA Screen Protector (anti-glare)
I read good things about the this ones and I would be willing to give them a try. Are they a good anti-scratch protection? How is the image quality with them?
DC MUGEN MATTE (anti-glare & anti-fingerprint)
The cheapest of the ones I've selected. I saw a video at youtube where it seems they act good as anti-fingerprint, not as much as anti-glare. I'm worried if this would be a good protection against scratches and if it would allow a good image quality.
The two first are "full body" sets and that is a pro but please don't take them as a decision factor. I have already bought a case (expecting deliver), so I'll have the phone body protected. I only put them here because I think it's a better deal to give more 10$ for the "full" set instead of the "screen only" as I might don't like to use the case I've boughted.
Please feel free to comment your experience with this screen protectors, you're advice is very important to my.
I don't know about BodyGuardz, but do not buy the Zagg/Invisible Shield full protector. It sounds like the material is the same: it is very "sticky", leaves fingerprints and does not give good feedback on the screen.
Best to go for the traditional screen protectors. I bought one from Boxwave, similar to the Brando one (which I used on a previous phone, excellent).
Unless anti-glare is a key requirement of yours, I would go for the crystal-clear variant. With glare, you can always tilt the phone away from the source of light (or up the screen brightness if you plan to be outdoors & using the phone). Anti glare looks less clear indoors.
I find most of my screen use is indoors. I happily pay €10-15 per protector, and think it will last 9-12 months, depending on use.
Thanks for the reply =)
Yes I know that the zagg screen protectors aren't a good deal, but for what I read the Bodyguardz are alot better for the screen, as they don't have that orange peel texture, they don't get yellow and they don't distort image, neither creates color aberrations. I really demand a anti-glare protector, just want it to be as usuable as the screen is outdoors. I just want to fingerprints to be less noticeble (and protect the screen obviously ) and for that anti-glare protectors seems to work better than the clear ones.
I've always used Boxwave ever since my Treo 600
http://www.boxwave.com/products/easyfinder/buy-best-sony-ericsson-xperia-x1-accessories_3351.htm
Martin Fields
I've done MArtin Fields, I've done generic matte, and I've seen the light with the Boxwave glossy screen protector. It is excellent with a great fit, and reliability. I've had mine for a year now on the X1, and it is still going strong with just one half a centimeter scratch on the protector after all this time. The best part is you don't even know that it's there.
Thanks to all that have answerd so far =)
About Martin Fields I read some good things about them, but I saw some people complain about how easy scratchable they are, even nails using the touch screen, would scratch them. Maybe it was a bad shipment.
Boxwave screen protector for what I've searched it seems a good product, maybe I'll give them a try.
Please feel free to continue giving you're opinion
I used this one:
Glare-free LCD Screen Protector for Sony Ericsson X1 (w/Cleaning Cloth)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
$1.15 + free shipping
Can't be more cheaper huh
eDaniel said:
I used this one:
Glare-free LCD Screen Protector for Sony Ericsson X1 (w/Cleaning Cloth)
$1.15 + free shipping
Can't be more cheaper huh
Click to expand...
Click to collapse
I tried a Martin Fields, and then one of these that you link to. I thought this cheap one was much better!!
Aleemz said:
I tried a Martin Fields, and then one of these that you link to. I thought this cheap one was much better!!
Click to expand...
Click to collapse
I'm pretty satisfied with this cheap protector - I bought two of them, just in case. Very easy to apply - fits perfectly.
The problem with this cheap protectors is that usually they require a "luck factor". If you are lucky you get a very good product, or you have just burned a few bucks.
I use the Steinheil LCD Protection Film Premium, specifically cut for the X1, available on ebay. no matter of opinion, no argument, this is the best. you can't tell it's on the screen, doesn't impair responsiveness, it will never scratch, and wipes grease away perfectly. i love it
nunosardo said:
The problem with this cheap protectors is that usually they require a "luck factor". If you are lucky you get a very good product, or you have just burned a few bucks.
Click to expand...
Click to collapse
I agree, but the brand linked to a few posts back is one of the good ones at a cheap price.
EDIT: I just got these today; http://www.dealextreme.com/details.dx/sku.23639
Delivered to the UK 9 days after ordering. The feel of the screen is actually better/smoother with both finger and stylus than the bare screen. Very much recommended. Better than screen protectors costing 10 times the price that I've tried.
asayamalaka said:
I use the Steinheil LCD Protection Film Premium, specifically cut for the X1, available on ebay. no matter of opinion, no argument, this is the best. you can't tell it's on the screen, doesn't impair responsiveness, it will never scratch, and wipes grease away perfectly. i love it
Click to expand...
Click to collapse
Did you get the crystal glossy screen protector or the anti-fingerprint matte screen? I can't decide which would look better on my phone.
I want to see how other users protect the DINC as I have my methods, and I want to see the best solution.
IN a perfect world I would rock it naked, but knowing that i have dropped the phone like 30 times, this is not an option..
Im using the Seidio Innocase II on my Dinc and I find I like this case best..
Should I use a screen protector on my next phone? I dont use one now... but i paid dearly.... I was using a smaller case and the phone fell face first to the ground and when i picked it up it has small hairline scratches on the screen...
Needless to say I switched back to the safety of the Seidio Innocase II with its lip to protect falling on its face, but..
I dont know what to do.. Im not going to buy a screen and replace it..
and I hate screen protectors...
Hmm... What to do for next time.
Hate or not it's still cheaper than replacing the screen. I use the Seidio Innocase II with the Seidio crystal screen protector and have droped my phone about 100 times so far and no damage.
Hmm, i dunno
i have a Seidio SURFACE case with a ZAGG screen protector (only reason i got this was because of the life time warranty). not one scratch, dent, or anything on the body or screen of the phone. the case how ever has been through hell and back.
I keep mine where it's safe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Seideo active case, no screen protector.
Had a screen protector on it before and my screen shattered, only cost $30 to replace anyway so if anything happens bad enough again, I'll just replace again.
Likely won't ever or at least won't happen for a long while.
I used the gloss silicone cover sold by Verizon for the first year that worked very well and protected my phone from drops onto concrete, brick, and marble. I just bought the $5 Speck case from Verizon that I really like so far but haven't "tested" it.
I used a screen protector for a while, but didn't like the rainbows caused by finger smudges, so now my screen is unprotected (but still in perfect condition).
Silicone case and my pleather HTC belt case. No screen protector i got sick of them. I cook pizza and stupid flour used to always get wedged under my screen protector so i stopped using them.
Hmm yea i will prob stick to the seidio innocase screen protectors suck
Sent from my ADR6300 using XDA App
I think screen protectors get a bad rap because of installation issues. I bought a three pack of screen protectors from Amazon for less than a buck, and they work great. Spend the time to install them right and I haven't had one come off.
It might be slightly more prone to fingerprints and glare but the ones I use are clear with no rainbowing.
Sent from my ADR6300 using XDA App
Verizon screen protector and speck shell. Both of these work great together.
Sent from my HTC Incredible using XDA App
I use the Verizon shell/holster combo. Well, I don't actually use the combo, just the shell. It's a one-piece cover that clips onto the phone. The shell protects the camera lens and its edges help protect the screen as well. Since the shell doesn't cover the ends of the phone (just the sides), I can wipe the screen off without getting an accumulation of grease and dirt just inside the shell's edges.
I have never used a screen protector. I got my DInc days after its initial release and still have a perfectly smooth screen, so why bother? I usually put the phone in an otherwise empty pocket, whether it be in jeans, cargo shorts, or a jacket.
I do have a few very minor nicks along the top and bottom edges of the phone, but they can barely be felt and you have to hold the phone at the perfect angle to see them.
I'm hoping my next phone and case hold up as well as my DInc.
For a year my phone was naked, got dropped a couple times on tile floors and hardwood - the battery door would fly off, sometimes the battery would pop out - took it like a champ. Then my poor phone met concrete paving stones. It didn't like them and the screen shattered. So after getting a replacement it now resides under a screen cover from htcpedia and a silicone case.
Rocked it naked for about 6 months until it took its first drop, now it's in an OtterBox Commuter series case without screen protector. only a couple minor scratches around the outside edge of the phone from the drop, screen has minor wear and tear (small surface scratches, have to be in BRIGHT light to see them).
I have the invisible shield for the face and I have the seidio active burgundy case and they work great together. The invisible shield is great and the response on the touch screen is like its not even there.
It would take a lot of hard thrashing to even begin to damage my incredible.
Trident Kraken Case
Zagg screen protector (because it's never gone more than a minute without a screen protector...ever)
I watched a video of a shop selling the Trident Kraken and they put the phone in the case, climbed a ladder 10 feet high, and dropped the phone from the top and his arm's length. He let go and it bounced a couple times upon hitting the PAVEMENT. He got down and showed the camera that it was still perfectly alright. I was sold, and bought the case a few minutes later online. They have many different colors and replacement parts. I got grey/black.
I took the phone out a few weeks ago to change the battery and it still looks as good as it did the day I bought it. I've dropped it, bouced it, even thrown it all the way accross my shop to someone who didn't catch it and it hit a toolbox instead. Didn't even scuff the case.
Sure it's a bit larger, but I don't mind at all since I've been looking for a tough android smartphone since android came out. And since I had to buy the entire phone myself not on a plan, I don't get insurance, so the case doubles as my insurance policy, as well as making it strong enough to take to work with me and not have to worry too much.
Take a look at the Trident Kraken. Its also cheaper than other comparable tough cases.
I will only buy Otterbox cases, I have the Commuter case on my inc with their screen protector.
I have owned several seidio cases, they just don't match the quality or customer service of Otterbox.
I am biased because my dog recently went after my phone and the otterbox saved it from destruction
I'll be honest, when I first got my Inc, I had nothing on it for about 2 weeks. I ordered some cheap case/screen protector/car charger for like 4 bux on ebay. It's the same case the kiosk at my mall sells for 20. So I laughed. It was super tight on it when I first put it on, but because of the stupid design for the sd card under the back cover, I had to remove it. After taking off a few times, it started being very lose, and eventually broke.
The screen protector has held up pretty well, other than a deep gash in one spot, but it's not in the functional part of the screen, but in the blackened part towards the top right corner.
Recently, I picked up a *speck case from Verizon for like 5 bucks, and it's made my Inc the perfect size for my hand. The other case gave me problems with hitting the "p" button when I texted because of my fat fingers lol. The speck case is absolutely perfect. Would prefer it was pure black rather than red rimming, but it'll suffice until I upgrade to the Vigor.
Had a kraken and since have gone back to the vzm high gloss silicone case. This case has saved my phone a number of times and I consider the incredible to be a durable phone. I've thrown this phone through a wall and its still working.
Sent from my ADR6300 using XDA App
I used to have it in a (pleather?) case I got from verizon when I got it. That lasted about a year before it got too worn down. I then had it in a cheap case that was horrible and I ended up throwing away, so now it is not in a case.
I always have a screen protector on it. If there is one thing that is super annoying on a phone when it gets scratched, its the screen.
I've got the Samsung Galaxy S6 Edge and while it is beautifully made of corning gorilla glass 4, I couldn't afford to just leave it naked, especially that it's valued at $700+. I've got four screen protectors on my list that qualifies for the S6 Edge.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My first choice was Skinomi but at that time, it run out of stock so I've looked for another brand and choose IQ Shield Liquid Skin protectors for my device. If you asked me why I didn't choose SuperShields eventhough it was relatively super cheap, $1.99 , it's because their reviews are not satisfactory and Armorsuit was too expensive.
Oh well, IQ Shield Liquid Skin protectors on Amazon claims to be "smooth to touch, anti-scratch, no bubbles, edge to edge coverage, clarity and ultra responsive". Did it live up to their advertisement? I cannot say it was 100% but it was close to perfect. It was ended smooth to touch, edge to edge coverage and ultra responsive. There were bubbles and it was not clear right after installation but it says on the box that it should dissipate after the film settles onto the device, 3-4 days or so and it did. The anti-scratch is yet to be tested. But so far, all is well. I have no complaint.
Word of caution,it's wet install but I can vouched that it's harmless. Just be sure to follow the instructions and no, you don't need to wait for 48 hours so you can use your device. I did it at night before going to sleep and the next day, I was able to use it. Bonus, they offer lifetime warranty.
I tried the supershield. It did fit edge to edge, however it did not stick to the edges well. I found myself having to push the edges down every time I picked the phone up. It was very annoying. Finally, I just took it off. I'm now waiting for the skinomi skin I ordered. I've used skinomi before several years ago but it was a design and not clear. I'll update once I try it out.
Sent from my SM-G925T
installed the Skinomi yesterday, and its perfect..when its back in stock, grab one..
wase4711 said:
installed the Skinomi yesterday, and its perfect..when its back in stock, grab one..
Click to expand...
Click to collapse
How easy is it to install? Usually you use the corners as visual cues for alignment, and I feel it's gotta take at least a little longer to install the damn thing on the phone, haha. Really, though, wish phones just came with these things installed. I'm pretty good at installing things now, but every time I do it, I get a ridiculous amount of stress.
super easy; I used to sensors on top to get the alignment, and once that was in place it was simple to just lay it down, move it around slightly, and push the bubbles and water out from the center to the edges. Once that was in place, I waited a minute or two, the went over it again, pushing out all the bubbles and moisture, and then used a credit card wrapped in the included cloth to push down the edges, and boom, entire job took less than 5 minutes.
There is a video on their site showing you how to do it, but it was super easy. Once its on nice and flat, leave the phone alone for a couple of hours, and, you should be fine. I waiting until the next morning to put the case on, just to make sure not to push the edges up, and its fine now!
The IQ Shield was on sale yesterday. Not sure if it still is. http://slickdeals.net/f/7784145-iq-...ipped-full-body-1-99-shipped-amazon-deals?v=1
Anyone tried this claims covers curved screen http://www.amazon.co.uk/gp/aw/d/B00...+protector&dpPl=1&dpID=51iHkFvtFWL&ref=plSrch
jah said:
Anyone tried this claims covers curved screen http://www.amazon.co.uk/gp/aw/d/B00...+protector&dpPl=1&dpID=51iHkFvtFWL&ref=plSrch
Click to expand...
Click to collapse
i actually bought this, i aint got the phone yet, nut yeah it covers to the edge
Anyone tried the for curved screens? http://www.mobilefun.co.uk/olixar-samsung-galaxy-s6-edge-curved-screen-protector-p52772.htm
Probably the first phone im not even going to bother with a screen protector. The gorilla glass is just that good on its own lol. See how i go, hopefully I won't regret it
I had one of the invisible shield ones installed at best buy today. Fits perfectly and they did a good job with it. Prefer the glass ones, but this looks good. Wish they'd had a back version.
Sent from my SM-G925T using Tapatalk
Guys, I tried Skinomi and it looked ugly, I guess the liquid installation ones are sorta rubbery and take the beauty and ease of use away. I will use mine naked with low profile case. Also, if anyone is interested in Skinomi from amazon.com, here are some promos, it makes it under a dollar shipped for screen protector only!! Hit thanks if you like.
Save $6.00 when you purchase 1 or more Qualifying items offered by Skinomi. Enter code ARAN9QTM at checkout.
Save $6.00 when you purchase 1 or more Qualifying items offered by Skinomi. Enter code VZQH6KLB at checkout
Save $7.00 when you purchase 1 or more Save $7.00 offered by Skinomi. Enter code U5QVM9AD at checkout
Save $7.00 when you purchase 1 or more Save $8.00 when you purchase 1 offered by Skinomi. Enter code IF7QYNLL at checkout.
Linky
http://www.amazon.com/Skinomi®-Tech...id=1428683776&sr=8-1&keywords=skinomi+s6+edge
Original credit goes to robbiemoore on slickdeals.net
Don't bother with the Healing Shield Matt. Yes it covers the whole screen but nightmare to apply and impacts the quality of the screen too much. Makes the screen too fuzzy http://m.ebay.co.uk/itm/251899776472?nav=SEARCH
Any personal suggestion about these 2 screen protectors? Spigen vs Skinomi?
http://www.ebay.com/itm/Skinomi-Tec...648?pt=LH_DefaultDomain_0&hash=item5673630508
www.ebay.com/itm/Galaxy-S6-Edge-Scr...t=LH_DefaultDomain_0&var=&hash=item3aa71bda51
I'm considering whether or not to keep my S6 Edge as the glare on the corners on the sides is bothersome when watching videos. Do any of the screen protectors mentioned in this thread help cut down on glare? (I was thinking the Skinomi Matte Skin based on the reviews)
I'm convinced that the Edge feels like a more engaging device without a screen protector getting in the way
the Skinomi fits really well, and doesn't get in the way of anything, and gives you a little piece of mind, in case you drop it on a rock face down..
fotis12 said:
Any personal suggestion about these 2 screen protectors? Spigen vs Skinomi?
http://www.ebay.com/itm/Skinomi-Tec...648?pt=LH_DefaultDomain_0&hash=item5673630508
www.ebay.com/itm/Galaxy-S6-Edge-Scr...t=LH_DefaultDomain_0&var=&hash=item3aa71bda51
Click to expand...
Click to collapse
Between these two, I'll go for Skinomi. Like I've said earlier, Skinomi was my first choice but they run out of stock. Now that I have IQshield LiquidSkin screen protector, I'll settle for this and see how long it will lasts. So far it's doing good. Btw, Skinomi really have great fitment, great reviews.. Try it and see for yourself
Hey guys check out Verizon. They carry a dry version of Zagg that does not use a liquid spray. It comes with front and back and covers edges as well. I picked it up at my local corporate verizon store. I tried it out as I couldn't seem to find a dry install anywhere online and personally don't like the protectors that use liquid sprays. I personally like it and think it looks great. It takes a day or two to finally set in. After the second day mine self healed all the bubbles and looks perfect now.
http://www.verizonwireless.com/acce...ld-dry-for-samsung-galaxy-s-6-edge-full-body/
Sent from my SM-N910T using XDA Free mobile app
A curved design non tempered glass though. But not sticky enough on sides to keep screen protector in place on one side so have ordered a replacement http://www.mobilefun.co.uk/olixar-f...xy-s6-edge-curved-screen-protector-p52772.htm
Hey Guys and Gals,
DrkGhst87 here and I just wanted to give those of you who are still figuring out which case and/or screen protector you might want to get with my opinion on these 2 items I purchased off of Amazon.com. And to show off my awesome looking Galaxy S6 EDGE!!! (Link to Album if you just want to check out the pics.)
First the Spigen Neo Hybrid Series Case for Samsung Galaxy S6 Edge:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This case is a beauty. Loved it as soon as I saw it. It's sleek, slim, and easy to hold. The back of the case looks nice and provides extra grip to hold. It's not slippery and doesn't give you that feeling it's going to fall right out of your hands. With the edge having "sharp" edges and that for some has caused some discomfort, the case provides just enough extra lip so that it feels nice in either hand. The case adds a "mm" or 2 so that when lying face down, it's not lying on the screen. It comes in 2 pieces, the shock-absorbing TPU case + polycarbonate bumper. Even with the case on, when placed on top the wireless charger, it charges just fine. It's$24.99 right now as of this post but I was able to pick it up for under $20 and I'm sure you could to. 10/10 would recommend.
Second the controversial Spigen Galaxy S6 Edge Screen Protector FlexHD Clear Screen Protector:
Now let's begin with the fact that this was my first ever "wet" application screen protector. I was a nervous wreck spraying that solution over everything and the subsequent consequence of solution all over my brand new phone... Since I was so use to putting on those one and done "dry" application protectors I was hoping for them to come out with one for the Edge, since I wanted protection from one side to the other and not just the top of the screen, but unfortunately I couldn't find one personally. Since I went with the Spigen case, why not go with the full coverage screen protector as well and it comes with a back glass protector to boot. At first, I was completely devastated by how it looked after my initial install, there were bubbles and blemishes everywhere. I went online to find the only advice was to let it "settle" and that most if not all the bubbles would go away in time. Boy, that waiting was rough. I'm a perfectionist at heart and seeing all those bubbles was killing me. But I can honestly say right now, I'm glad I went through with it. Not only do I now have Edge to Edge protection, but it looks like glass and feels like glass as well. I've shown my phone off to a few friends of mine and they couldn't even tell I had a screen protector on my phone. The back protector went on smooth, since that was a traditional "dry" application. I did notice that the back protector was a tad bit small on the sides and didn't exactly cover the entire back glass. Since I was putting on a case anyway it didn't bother me to much, but for those of you who carry the phone "naked" this might present a little problem... or none at all, it's really up to you. At the end of the day however, I love the look and feel to it and would recommend it to anyone that has the nerves to put up with the "wet" application and the waiting for it all to "settle". It's $15.99 right now. 9/10 would recommend.
Thanks for taking the time for reading my review. I hope that my post helps anyone with their purchase.
Here's the album with my phone in the case and with the screen protector on as well
Looks great I'm gonna purchase these now. How's the screen protection around the edges with the case on it? Any raise up or bubbles?
clorbag said:
Looks great I'm gonna purchase these now. How's the screen protection around the edges with the case on it? Any raise up or bubbles?
Click to expand...
Click to collapse
It's a perfect fit. There's no bubbles or raise up at all. Obviously it's a YMMV situation, because it's all about how you apply the screen protector, but if you can get it on just right it looks amazing. I've swiped from the both edges and you don't even touch the end of the protector to lift up accidentally and the case comes up to a really nice spot along the edges and covers a bit of the protector at the top and bottom. The most nerve wracking part was the initial application of the top screen protector with the solution. As I'm sure you might have seen all the posts on here about the bubbles and blemishes, I just wanted to provide some images of it done right and all the bubbles going away. I had some bad looking bubbles too. Just kept working them out with the provided squeegee over the past few days.
I had already ordered one of these from Amazon, but god damn that looks even better than I was expecting. Thanks for sharing.
wow! you installed the screen protector perfectly well. thanks for the review and the assurance that the SP feels smooth and seamless.
For the screen protector, does it reduce fingerprints? Thanks in advance.
DrkGhst87 said:
It's a perfect fit. There's no bubbles or raise up at all. Obviously it's a YMMV situation, because it's all about how you apply the screen protector, but if you can get it on just right it looks amazing. I've swiped from the both edges and you don't even touch the end of the protector to lift up accidentally and the case comes up to a really nice spot along the edges and covers a bit of the protector at the top and bottom. The most nerve wracking part was the initial application of the top screen protector with the solution. As I'm sure you might have seen all the posts on here about the bubbles and blemishes, I just wanted to provide some images of it done right and all the bubbles going away. I had some bad looking bubbles too. Just kept working them out with the provided squeegee over the past few days.
Click to expand...
Click to collapse
Thanks I've had problems in the past where the case would mess up the screen protection. This was a great review thank you!
I bought this case on Friday (it's should be at home when I get back) and was about to buy that exact screen protector as well but waited because I was so hesitant on that wet application - made me nervous!! Thanks for the review I think I'll pull the trigger
---------- Post added at 02:18 AM ---------- Previous post was at 02:08 AM ----------
Also - damn Verizon and their ugly unnecessary logos! Loving that T-mobile left off all carrier branding.
techenthusiast said:
For the screen protector, does it reduce fingerprints? Thanks in advance.
Click to expand...
Click to collapse
Honestly, it's a YMMV situation. Somedays I won't have a single fingerprint on it, the next I'll have a screen full of them. I would say I don't get as much or more than my buddy who has his S6 Edge "naked" all the time but it could be how I use it as well. I'm on my phone for calls a lot so I've noticed that the oil from my face creates a lot of the fingerprints, but if my screen was clean to begin with I haven't noticed to many if any at all. Also, how clean my hands are when I use my phone is another factor. So I'd say it's about the same as having the phone "naked", without it on.