Database Develop

Desperatly need help getting 3G instead of E

Hi guys,
I brought my first xperia from my phone serivce provider, and it always had the "3g" symbol at the top. However, when my xperia broke, I had to buy another one and got one of ebay. Since I brought the new one, my phone always has the 3 on top. I'm currently using the firestorm valkyrie rom which as the htc interface. When I go to the data connections it says an option (3g) "change to gsm mode" and on is selected. Even when I toggle that, it still always has the E symbol. What do I need to do? I know my sim card is cabable of getting the 3g. But this is a real pain because every now and then my phone just doesnt receive service, so I constantly go onto the comm manager and then it seems to just click that there's service and shows 2-3 bars. Then all of a sudden again after a while there'll be no service. So I'm guessing that's because of the E thing. It shouldn't be my current location as I've never experienced this before.
Is there a setting I can go to to get the 3g symbol? Or a patch I might need for the phone?
Please help
Kindest regards.

You need to change while the connection is not active, I believe. Or... you got the Xperia version incompatible with your network... Or... the ROM is buggy, try another.

sorry, I need to change specificially what when the connection is not active? Say you mean, turn off my phone settings and not connect to the network and then adjust something? It is not the rom. and the seller on ebay has stated that it is a 3g phone - many others have brought it as well with no complaints.

3G settings on x1
Hi
For some reason your phone is only camping on the GSM network (G or E indication depending if your carrier provide GPRS or EDGE on the GSM) instead of the 3G network (which you have been using before).
In settings, communications you should be able to set "3G change to automode" to on,
When this is set your network provider will tell your phone to use the 3G as preffered network, but when coverage is not good enough it will drop you back to 2G (which has a better reach due to lower frequency band).
If it does not happen automatically there might be another setting that is wrong,
goto settings, all settings, personal (tab), Phone.. then choose the "band" tab (need to go to the left with the arrows) , then you have the dropdwn lists to set:
select you network type (need to set auto or wcdma to get 3G)
select your GSM/UMTS band (need to set 900+1800 for europe, 1900+850 for us, dont know who is using 2100+800)
once changed the phone will restart the phone part and search for your carrier in the right band.
good luck

Hi,
Thanks for your reply. I had changed the automode to on. But still had the E.
I went to the setings, and band tab, and i had selected:
Select your network type:
(blank)
Select your GSM/UMTS band:
Auto.
I changed the first oen to auto, and as for the last, here in Australia I'm with Tesltra which is 850 UMTS? I think I read online. Anyway it didn't have the option in there, so I went through them all but wouldnt get service at all except for the first: GSM (900+1800)+UMTS(2100+900). and Auto. I think my last experia might have had auto for all of those too. Anyway with those only two options working, I still get the E icon. Even tried setting aeroplane mode on and then off to see if it might register, but it didn't.

sianlee said:
Hi,
I changed the first oen to auto, and as for the last, here in Australia I'm with Tesltra which is 850 UMTS? I think I read online. .
Click to expand...
Click to collapse
I see , Telstra is one of very few networks that use 850 for WCDMA so they might be using a different RADIO ROM than the rest of us
I saw in the thread below that there is a TELSTRA AUSTRALIA (1.03.841.8) R2AA008 version..
http://forum.xda-developers.com/showthread.php?t=477801&highlight=telstra
you probably need to flash that one to get the 3G working on telstra..
3 is using the normal 2100 so you could also try with their SIM just to check that there is nothing wrong with your hardware..

Sorry for the late reply.
I have realised that i'm in an area that doesn't support 3g. however my last xperia phone which I brought from telstra was the x1a, which had the next g network - hence I got the 3g symbol. However I have found that that I have the x1i, which doesn't list that network. I rang up telstra, and they transferred me to the sony erricson call centre, and they said you can try and do an update but it is not gaurenteed to get the next g service. I have already flashed a htc rom and don't particluarly want to change it back, unless i'm certain that I will get the next g service.
With the rom you have provided, do you think it will have the UMTS 850 band on there, and my x1i would be able to connect to it? I would have thought that it would be a hardware preference, not a software. In which case, even if I updated the rom because there is say no "chip" that allows for connecting to that band, it wont connec to it even though I may have selected the 850 UMTS band.
Sorry if that seems all over the place, but yeah... I'm not sure.

N1 on Three (3) UK?

I've just moved to 3 in the UK (from vodafone) and I can't get a data connection - I get the error "Data connection lost" reported on several threads here, however my old vodafone SIM (which runs out on Tuesday) runs perfectly fine on 3G
on 3 the phone test (#*#*4636*#*#) shows HSDPA connection and the ping test FAILS (with no response)
on Vodafone I'm also on HSDPA - but the ping test succeeds
I'm on
stock Froyo FrF91 -
rooted and unlocked
32.36.00.28U_4.06.00.12.7 baseband
and 2.6.32.9-27227 kernel
So
Anyone have a clue what the issue might be?
If I can't get this fixed I'll have to move (AGAIN!) , off Three - and onto somewhere else. I'm sure there are other 3 users with N1's!
Graham

More bizarre
OK - this gets more bizarre - can anyone explain this?
Take my 3 SIM to 3 Shop - plug it into a 3 branded HTC wildfire - and it works just fine. Use their 3 SIM from the HTC wildfire on my machine - and it work great. Plug my sim back into my N1n- it works just fine now. #*#*4636*#*# actually resolves my pings and get great transfer speed
All smiles
Drive home - check again - no name resolution occuring - no data download. still on HDSPA
:-(
WFT is going on here!!
G.

Hello,
I'm on Three with a N1 and unlocked custom Froyo Rom. Works fine for me. Question, are you getting 2g signal, can you make calls etc, is it only 3g you are having problems with?
Are you sure there is Three 3g signal in your area?
Settings>Wireless and Networks>Network Operators
Can you see it there?
Have you tried resetting your APN settings to default?
Settings>Wireless and Networks>Access Point Names>
Menu>Reset to Default
Let us know how you get on.
Cheers.

Have you tried "WCDMA Only" instead of "WCDMA Preferred"? Works better on 3 for me anyhow in Ireland.

jim29 said:
I'm on Three with a N1 and unlocked custom Froyo Rom. Works fine for me. Question, are you getting 2g signal, can you make calls etc, is it only 3g you are having problems with?
Are you sure there is Three 3g signal in your area?
Click to expand...
Click to collapse
Well on the stock froyo rom it doesn't differentiate between 3G and H,but I always get 3G displayed - with 4 bars. Can make calls - no problem
The diagnostics always shows HSDPCA (or whatever!)
however it won't ping or resolve from my house
I drive into town (1 mile) - and it works
I guess its a reception issue??
Phone physically gets hot with the 3 SIM in - at my house - and battery life is appalling (3 hours to flat) - so I guess its trying really hard to connect.
I defaulted the APN again and selected EURO band only - and still no luck. No data connection from my house.
3 network coverage map says I have good coverage - and (as I said) 4 bars in signal strength.
Odd
G.

cpm said:
Have you tried "WCDMA Only" instead of "WCDMA Preferred"? Works better on 3 for me anyhow in Ireland.
Click to expand...
Click to collapse
Remind me - I know I've seen that option somewhere - but I can't find it at the moment
Thx
G.

Set WCDMA Only the same menu you chose Euro Band from. It's a dropdown box.
It does sound like it could be a reception problem all right. There's also a new radio available which might provide stronger signals. Worth trying that too IMHO http://forum.xda-developers.com/showthread.php?t=723839
Sent from my Nexus One using XDA App

If u have 2g to make calls and Wifi for Data, then you might have to settle for that I guess, if your phone works 3g in one area and not another, I would say reception issue, do any of your mates have a Three phone they can test at your house?

Here's another tip, try the following...
Menu > Settings > Wireless & networks > Network operators
Select "Data roaming"
Choose "Select automatically" instead of 3
See how that goes.
PS I'm now using the new radio 5.08 I linked to above. Looks like I'm getting a stronger signal.
Sent from my Nexus One using XDA App

[Q] Nexus One not working with the Bell Mobility network either voice or data?

I just received my Nexus One which I ordered through the Google Developer program (Brightstarcorp) and I'm not able to get it working with the Bell Mobility network for either voice or data
I have a signal bars on my N1 with a Bell Mobility SIM card but it dosen’t works.
When I slide down the notification bar it say "Bell" and try this to get it working.
I have tried all solutions and have the recommended settings on the phone (also running Froyo 2.2.1-Build number : FRG83).
- I tried my SIM to another Bell phone and it works.
- I tried another Bell SIM in my N1 and it did not work.
- I'm using an active data plan card not a prepaid card.
But it works with Rogers or Fido
I tried the following :
1.Go to Settings -> Wireless & Networks -> Mobile Networks -> Network Operators: after about 1 minute I see network the currently available Bell
I click on Bell and see a signal not working.
2. Go to the dialer and type in *#*#4636#*#* this bring a hidden menu
3. tap on "Phone Information" It list the current network as Bell and also showing the IMEI and the Phone number. The IMEI and phone number are correct.
4. Hit the menu button and press "Select radio band" and click on "Automatic" .
5. Still not working I make sure radio band is set to "Automatic" then go back to the previous screen and scroll all the way to the bottom. Click under "set preferred network type" and choose through until I find one that works 1. WCDMA preffered or WCDMA only or GSM auto (PRL) it takes a few seconds from the time I click until the settings take place, just watch the signal bar at the top of the screen until it changes. Even try the "unknown" network type at the bottom of the list if the others don't work.
All the above fails.
For those of you out there who have successfully activated the Nexus One on the Bell network could you let me know which version of the phone you have.
Thanks for your suggestions.

well i am sorry to say but i dont think that the phone will work with Bell. the dev phones as far as i know are all AWS. so the only way it is going to work is if you get a rogers sim and use it on edge or a wind/moblicity sim and you can use 3G. bell does not have an edge network to back up on.

That's true. Bell/Telus has only the 3g network. The developer phone will not work. It will use edge/2g on Rogers/Fido. And will be fully supported on Wind or Mobilicity.

Nexus One with a Bell Mobility it dosen’t works!!
About Videotron?
Thanks

Does 2G work on Telus with Milestone?

I'm currently using CM 6.1.2 on my Milestone.
If I switch to 2G mode in the mobile network settings, I have no connection.
If I use the Toggle 2G app, it doesn't seem to really do anything. If I set 2G to use one of the options that don't disconnect me (WCDMA, CDMA or GSM 2g/3g) it still shows 3G in the status bar so I'm not sure what the point is in using the Toggle 2G app.

Wondering the same thing myself...
Does anyone knows the answer?

zeppelinrox said:
I'm currently using CM 6.1.2 on my Milestone.
If I switch to 2G mode in the mobile network settings, I have no connection.
If I use the Toggle 2G app, it doesn't seem to really do anything. If I set 2G to use one of the options that don't disconnect me (WCDMA, CDMA or GSM 2g/3g) it still shows 3G in the status bar so I'm not sure what the point is in using the Toggle 2G app.
Click to expand...
Click to collapse
I am not certain about this (i use rogers), but i believe that telus has no 2G (edge) network. They built a 3G only network just in time for the olympics to replace their cdma network:
So the toggler probably cant find a valid connection and retries 3G.
Manual mode cant find a network at all.
On rogers, i can fallback to 2g. This is normal according to what i think i know.
Sent from my Milestone using Tapatalk

thanks for the info.
That's what I thought so have given up on the idea of getting 2g to work
I guess when it comes to 3g and saving battery life, juice defender will have to do as it can turn off data when the screen is off but still have the phone working.

Well, I think I made some progress with this.
On my phone, I was also loosing the connection when switching from 3G to 2G but it's working now. I can get calls, it's only the data aver 2G that doesn't work now.
I have the Cronos rom on my phone, I can tell you what I did if you're interested.

Yes please do.
If it works on cm6 then at least I can also save juice by not using juice defender... oh the irony... lol
edit: hey look at all them Canadian flags, eh?!
Sent from my Milestone using Tapatalk

Took me a lot of time to find the right switches combination.
Anyway, I have Toggle 2G auto managing the 2G/3G and for the bottom 2 options:
2G network: WCDMA preferred (3G/2G)
3G network: GSM auto (PRL)(2G/3G)
If I check under Setting/About/Phone/Status, I see written mobile network type UMTS.

Hmm... I had those 2 settings reversed when using toggly2g
I will try that.
Right now, my mobile network type shows up as HSPA.
Your post prompted me to find the difference and came up with these 2 useful pages just before my head exploded.
Awesome thread: http://www.howardforums.com/showthread.php/1600012-HSPA-vs.-UMTS
Handy chart at the bottom of http://en.wikipedia.org/wiki/Universal_Mobile_Telecommunications_System

s0ulreaver said:
Well, I think I made some progress with this.
On my phone, I was also loosing the connection when switching from 3G to 2G but it's working now. I can get calls, it's only the data aver 2G that doesn't work now.
I have the Cronos rom on my phone, I can tell you what I did if you're interested.
Click to expand...
Click to collapse
Is this not the same then as just shutting off data?

Caz666 said:
Is this not the same then as just shutting off data?
Click to expand...
Click to collapse
Not sure but I don't think so. You can turn off the data but have the phone connected to the 3G network, right?
I think you could get data over 2G but it's just very slow, right?
With Telus I don't think they allow data over 2G.
zeppelinrox, I wonder why yours shows like this, what do you have active under those settings?
What ROMs are you guys using?

zeppelinrox said:
Hmm... I had those 2 settings reversed when using toggly2g
I will try that.
Right now, my mobile network type shows up as HSPA.
Your post prompted me to find the difference and came up with these 2 useful pages just before my head exploded.
Awesome thread: http://www.howardforums.com/showthread.php/1600012-HSPA-vs.-UMTS
Handy chart at the bottom of http://en.wikipedia.org/wiki/Universal_Mobile_Telecommunications_System
Click to expand...
Click to collapse
When I'm on 2G it shows as UMTS
With 3G (mobile data enabled) I see it alternating from 3G/UMTS to H/HSPA.

I'm on CM6.
My phone always shows HSPA except if I set it to use 2G then it shows GPRS - which is when I have no data and no phone signal.
I did use the Telus baseband file in AOR though... I wonder how it will behave if I use the Canada baseband....
Also, here's a neat trick....
dial *#*#4636#*#*
A Testing App will show up....
Select Phone Information and then goto the bottom.
You can set your preferred Network type.
Ok so that listbox shows all the different options.
The only options that will save are:
GSM only (2g - I get nothing - shows as GPRS)
WCDMA only (3g - shows as HSPA)
GSM auto (PRL) - (3g - shows as HSPA as well)
All the other options either are not selectable or just revert back to GSM auto (as is the case with WCDMA preferred)
I just did a few speed tests and I seem to get faster speeds with GSM auto than I do with WCDMA only
Gonna try that Canada baseband now....
Edit: Same thing. Except the speed test is slower for both WCDMA and GSM autio so best off using the Telus baseband.

The dial trick doesn't work. I dial the sequence as a phone number, right?
It disappears then nothing changes.

ah.. yeah sometimes it takes 2 or 3 tries...
do you use adw launcher?
If so, you can actually create a shortcut for it... I figured it out today.
1 Press and hold on homescreen and select Custom shortcut
2 Press "Pick your activity"
3 Select the second item on the list ie. Activities (with the ADW icon)
4 Wait for all stuff to load, scroll down to Settings, and press the arrow next to it to see the long list of activites that Settings.apk can do.
5 Scroll down near the end of the list, you will see Testing(.TestingSettings)
6. Select that and press OK on the next window.
I also made one for Battery History, which is actually part of the Testing app but is usually only accessible through Spare Parts.

I still can't get the trick to work... doesn't do anything on my phone
Right now I'm on the 2501 rom (latest 2.2.1 from Motorola) and I can say it's the best I've tested so far!
Outstanding battery life!

I found another way to run Testing App.
With Google gesture search you can set it to launch Settings actions
Let it scan and then write "testing" on the screen
Edit: oh crap I mistyped the code.
Its *#*#4636#*#*
I had 4536 before so I fixed it
Sent from my Milestone using Tapatalk

zeppelinrox said:
I'm currently using CM 6.1.2 on my Milestone.
If I switch to 2G mode in the mobile network settings, I have no connection.
If I use the Toggle 2G app, it doesn't seem to really do anything. If I set 2G to use one of the options that don't disconnect me (WCDMA, CDMA or GSM 2g/3g) it still shows 3G in the status bar so I'm not sure what the point is in using the Toggle 2G app.
Click to expand...
Click to collapse
Well, after doing some more tests and trying different apps (2G/3G switchers) I can say those apps work only if your cell phone company has both 2G/3G network.
In Montreal, only Rogers has both.
Easy to test (btw: I'm using the FroyoMOD rom): go in "Settings" -> "Wireless & Networks" -> "Mobile Network Settings" and check "Use only 2G networks".
See if your cell phone company is listed when you do a search under "Network Operators". If it's not, don't bother using a 2G/3G switcher.
When doing this, in Montreal I see only Rogers listed. If I uncheck "Use only 2G networks" I see all 3 of them: Bell, Telus and Rogers.
Hope this helps!

[Q] Galaxy S4active LTE activation

Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.

Thaantje said:
Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.
Click to expand...
Click to collapse
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?

Cederic said:
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?
Click to expand...
Click to collapse
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm

Thaantje said:
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm
Click to expand...
Click to collapse
Well then I really have no idea - the only thing I can think of is that you might need to replace your sim card if your provider didn't already do so in advance of the 4G rollout. Hopefully someone with more information might step in here, but the international version is LTE capable out of the box. If you don't hear anything else I'd suggest to try and contact vodafone and get a clear answer from them first.

If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.

br0adband said:
If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.
Click to expand...
Click to collapse
I can check my area on the vodafone site. I live in a 4G network area 100%!
i guess my wcdma is sufficient then.. didnt experience speedboost tho..

br0adband said:
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional.
Click to expand...
Click to collapse
That would be because you're on the i537 from ATT, rather than the i9295 that this discussion is about. I checked google and vodafone holland does indeed use LTE on the right bands in its brand new rollout, so it isn't that - most likely it's his sim that needs replacing or it's just not activated on his account yet.