Related
how do you remove the icons at the bottom of the today screen in WM6?
i have already disabled Tray launch, but those icons still exist...see picture.
Remove the Battery Icon:
[HKEY_LOCAL_MACHINE\Services\Power]
"ShowIcon"=dword:00000000
Remove the Wireless Manager Icon:
[HKEY_LOCAL_MACHINE\Services\WirelessMgr]
"Keep"=dword:00000000
remove TrayAp.exe if exist
[HKLM\init]
Launch92=
look in
[HKLM\Software\HTC\TrayApplet]
search registry for tray and see what it comes up with, be careful, backup reg keys before editing
Delete - init_tray.lnk if exist from windows\startup folder.
Look for other links in this folder that might create a tray icon
When you start DFregedit or DFrunningApps, it always installs a tray icon. I believe there is no option to disable this, all you can do is not to close it with close button but with menu>exit. Or be real nice to DotFred and ask him for an option to disable the feature.
There's a blue icon in the corner that I do not know, is it Bluetooth related or a suspend or reset button? Possibly placed their by software you installed or it came with your ROM.
The buttons there are: DFRegedit, Battery, Comm Manager, Rotate Screen, Pshutoff, Bluetooth.
ok will try the removal from the registry, i guess most people love this type of setup - with tray at bottom, i find it not nice to look at, since my icons on top are large and the ones on tray are tiny, no balance...hehehe.
@Paulpax did you use rltoday for your hima ? because I try to use it, but doesn't work properly
selangkahlagi said:
@Paulpax did you use rltoday for your hima ? because I try to use it, but doesn't work properly
Click to expand...
Click to collapse
yup i use RLTODAY and i edited the skin file to suit me. although the original skin.xml is already OK.
Hi
I am trying to do the same, found the values in the registry, edited them properly with a regeditor, but no changes. After a soft reset, the values are back as before, unchanged...
Any idea, what is happening? PHM registry editor has no "save" option, so I don't know other than to exit the application via "Tools - Exit"
dvdr said:
Hi
I am trying to do the same, found the values in the registry, edited them properly with a regeditor, but no changes. After a soft reset, the values are back as before, unchanged...
Any idea, what is happening? PHM registry editor has no "save" option, so I don't know other than to exit the application via "Tools - Exit"
Click to expand...
Click to collapse
Yes, this can be frustrating. On your desktop PC every change to the registry is immediately permanent, on your Hima it's not always so.
Count to 20, exit reg editor, count to 20, switch off, count to 20, switch on, count to 20, soft reset USING software!, not the hole/stylus method!, check result. Most of the time just using software soft reset also works but not always.
y dnt u guyz use CEregedit..it connects ur ppc to ur pc via USB and copy's all reg entries
please give a download link
ok here u go Maggy
wince regedit : http://rapidshare.com/files/72691245/ceregedit_setup.rar
Thanks a lot, this looks not only better than any xda regeditor, it even looks better than XP regedit! Any idea if a version for editing the XP registry exists?
yeah i have one called Registery Workshop..i will post its link A.S.A.P
im just even using the DFRegEdit that come with the Shekhar ROM, by the way, when u edit the SKIN.XML, u just open it with NOTEPAD, do editing, save, then to APPLY changes, open Settings - Today - Items - RLtoday - Options, the press OK for the SKIN to make the changes....then your TODAY screen changes.
When using the rlToday how did you make the scroll bar on the side go away?
kswissonez said:
When using the rlToday how did you make the scroll bar on the side go away?
Click to expand...
Click to collapse
In the skin of rltoday define the plugin height to be <= the space available
Where?
Where i can have this today??please repp...
Is there anyway to change or rename the two softkeys when touchflo is enable?
I use keyswop software but I think that only changes the default softkeys in windows not in touchflo.
TIA
Unfortunatly keyswop deosn't work on Diamond.....
Do you know which app. does
Edit Registry below, you can modify first page of TF3D Soft Key. I don't know about other page yet.
\HKLM\Software\HTC\Manila change value of each key (LSK for Left Soft Key, RSK for Right Soft Key)
HomeLSKArguments - Argugement of application you'll be calling
HomeLSKPath - Path to program with in "" i.e. "\Program Files\WebIS\PocketInformant\PocketInformant.exe"
HomeLSKText - text of the button.
HomeRSKArguments
HomeRSKPath
HomeRSKText
I put some screenshort in link below, check it out.
http://www.pdamobiz.com/forum/forum_posts.asp?TID=145949&PN=1
softkeyapplet_192
this works fine with pocket plus you kan put any programm here you want
sudsboy said:
Edit Registry below, you can modify first page of TF3D Soft Key. I don't know about other page yet.
\HKLM\Software\HTC\Manila change value of each key (LSK for Left Soft Key, RSK for Right Soft Key)
HomeLSKArguments - Argugement of application you'll be calling
HomeLSKPath - Path to program with in "" i.e. "\Program Files\WebIS\PocketInformant\PocketInformant.exe"
HomeLSKText - text of the button.
HomeRSKArguments
HomeRSKPath
HomeRSKText
Click to expand...
Click to collapse
Works fine.
does anyone have the path for contacts ? i dont find it, and the poutlook.exe does not work.
thanks
...and I need the path for "Phone"... for back to original state...
For contacts, you have to edit the 3 keys describes by sudboy :
HomeLSKArguments (or HomeRSKArguments) : modify value to "Contacts"
HomeLSKPath (or HomeLSKPath ) : modify value to "\windows\poutlook.exe"
HomeLSKText (or HomeLSKText) : modify value to "Contacts" (for exemple)
It works fine for me (Previously I always got an error message about trusted certificate ....)
For "Phone" the file is "PhoneAgent" (\Windows\PhoneAgent.exe) but I didn't test this one
tnacar said:
...and I need the path for "Phone"... for back to original state...
Click to expand...
Click to collapse
Just delete what you changed before in :
HomeLSKArguments
HomeLSKPath
HomeLSKText
can someone tell me what he path is for the connection manager? I can't for the life of me figure it out....posted this on the thread that had this information but it didn't get answered....
eskasi said:
can someone tell me what he path is for the connection manager? I can't for the life of me figure it out....posted this on the thread that had this information but it didn't get answered....
Click to expand...
Click to collapse
\Windows\CommManager.exe
Can someone please tell me what is the path for 'lock device' or 'device unlocked'?
Thanks!
Phone app softkey config
On my brand new TouchPro, I would like to modify the softkey in the phone app. I see how to adjust for the Home page, but is it possible for the Phone app? Thx in advance
path of "Programs file"
Is there any one know the path of "Programs file", that showing all programs in icon page!! Thank you.
sudsboy said:
Edit Registry below, you can modify first page of TF3D Soft Key. I don't know about other page yet.
\HKLM\Software\HTC\Manila change value of each key (LSK for Left Soft Key, RSK for Right Soft Key)
HomeLSKArguments - Argugement of application you'll be calling
HomeLSKPath - Path to program with in "" i.e. "\Program Files\WebIS\PocketInformant\PocketInformant.exe"
HomeLSKText - text of the button.
HomeRSKArguments
HomeRSKPath
HomeRSKText
I put some screenshort in link below, check it out.
http://www.pdamobiz.com/forum/forum_posts.asp?TID=145949&PN=1
Click to expand...
Click to collapse
For some reason this does not work for me. I've replaced path and text with my desired choice, and it does not load my desired program although the text shows what I want. I have the paths correct, tried other programs, still nothing. I've left arguments blank each time (maybe that's the fault?) but I don't know exactly what goes here.
I did a test, and changed everything BUT text. it still loaded camera, even though the path was pointing to another program.
any help appreciated. thanks!
tonefour said:
For some reason this does not work for me. I've replaced path and text with my desired choice, and it does not load my desired program although the text shows what I want. I have the paths correct, tried other programs, still nothing. I've left arguments blank each time (maybe that's the fault?) but I don't know exactly what goes here.
I did a test, and changed everything BUT text. it still loaded camera, even though the path was pointing to another program.
any help appreciated. thanks!
Click to expand...
Click to collapse
You have to restart. If the path is correct it will work.
yes I've restarted. anyways, I created a thread, it seems sprint users are affected by this issue of it not working.
Hi
Just to check, did you remove menu enhancement in 6.5.0.0.5? it doesnt seem to work.
Anyway, fast rom, thanks!
Hi, does anyone know how to remap soft keys on home screen? Default is Phone and Programs, I want to change one of them to run phoneweaver menu. Any idea how to do that?
Regards,
Lucas
use an regeditor or TC and go to registry,
then goto HKLM/Software/HTC/Manila
there you find this
HomeLSKArguments
HomeLSKPath -> Left Home Key
HomeLSkText
HomeRSKArguments
HomeRSKPath -> Right Home key
HomeRSKText
Path = Program to run
Text= Label on Home Screen
Ghostrider
It works. Thanks for that
Hi
Very usefull tip, is it possible to do the same thing with the other shortcut in manila
For example change "All people" in the people Page ?
Ghostrider said:
use an regeditor or TC and go to registry,
then goto HKLM/Software/HTC/Manila
there you find this
HomeLSKArguments
HomeLSKPath -> Left Home Key
HomeLSkText
HomeRSKArguments
HomeRSKPath -> Right Home key
HomeRSKText
Path = Program to run
Text= Label on Home Screen
Ghostrider
Click to expand...
Click to collapse
can you please give example how to write it?
if i want left key to be "resco explorer".
ishaked said:
can you please give example how to write it?
if i want left key to be "resco explorer".
Click to expand...
Click to collapse
HomeLSKPath :
String = \Program Files\Resco Explorer\explorer.exe
HomeLSkText :
String = Resco Explorer
Soft reset or deactivate and reactivate TF3D into your today settings.
Hi,
I got away with changing the softkeys in TF3D but how to change the softkeys when you don't use TF3D (standard softkeys)
Thanks
Lambert
Fabliv said:
HomeLSKPath :
String = \Program Files\Resco Explorer\explorer.exe
HomeLSkText :
String = Resco Explorer
Soft reset or deactivate and reactivate TF3D into your today settings.
Click to expand...
Click to collapse
Hi
Can anybody post the path for displaying contacts? I have a german diamond and I tried following, which does not work: \Windows\poutlook.exe
Which path does work?
Hello Lambert,
HKCU>Software>Micosoft>Today>Keys>112 for the left key
HKCU>Software>Micosoft>Today>Keys>113 for th right key
If the 113 does'nt exist, you can create it.
Beware when you modifies the registry, you do it at your own risk.
Make a backup before each modification.
You can try also "Remap Softkeys", is a freeware that will make it for you.
Put this soft where you want, "My documents" for exemple and execute it.
MaverickCH said:
Hi
Can anybody post the path for displaying contacts? I have a german diamond and I tried following, which does not work: \Windows\poutlook.exe
Which path does work?
Click to expand...
Click to collapse
Try this path : \Windows\Start Menu\Contacts.lnk
LamPET said:
Hi,
I got away with changing the softkeys in TF3D but how to change the softkeys when you don't use TF3D (standard softkeys)
Thanks
Lambert
Click to expand...
Click to collapse
for the Standart keys on startscreen you can use AdvancdConfig too
Ghostrider said:
for the Standart keys on startscreen you can use AdvancdConfig too
Click to expand...
Click to collapse
Exactly
Fabliv said:
Try this path : \Windows\Start Menu\Contacts.lnk
Click to expand...
Click to collapse
thank you. it works
another question. is it possible to allocate the function "keypad lock" to a soft key? path?
MaverickCH said:
thank you. it works
another question. is it possible to allocate the function "keypad lock" to a soft key? path?
Click to expand...
Click to collapse
You welcome !
Why do you want to allocate this keypad lock function to a soft key ?
You can lock your device by pressing and holding the "End Call" button or give it some more option ...
Fabliv said:
You welcome !
Why do you want to allocate this keypad lock function to a soft key ?
You can lock your device by pressing and holding the "End Call" button or give it some more option ...
Click to expand...
Click to collapse
yes I know. but it takes too long to press the "End Call" button.
I mean its not really a problem. But it would be nice to lock the device with one touch
MaverickCH said:
yes I know. but it takes too long to press the "End Call" button.
I mean its not really a problem. But it would be nice to lock the device with one touch
Click to expand...
Click to collapse
Ok, you can use and configure S2U2 to lock your device when you press the start button or if you put the device face down with GSen.
This app (S2U2) can give you more services that you need, but don't use the S2U2 CallerID cause it could be in conflict with the HTC CallerID.
Search for S2U2 Thread on xda-dev and GSen in this forum.
Have a look at this topic to : http://forum.xda-developers.com/showthread.php?t=305402
Hi,
I am trying to remap the right softkey to open the programs part of the start menu. for some reason, whatever I try, I can not get it to map to here. It tends to either error and say that it is digitally unsigned, or it opens explorer, not in the programs folder. Bit odd really. Any suggestions?
Hi, I need to map a WiFi ON/OFF toggle on the Manila Right Soft key on homescreen, cause its taking to much time going to conn.mgr. every time... is it posible ?
thx for any advice
Well I think lots of us were searching for a "videocall" fix...
In the new rom 1.93.707.1, "contacts" soft key was replaced with "video call".
Can this be fixed via registry change and revert the softkey from "videocall" to "contacts"?
How do i set the right key back to what it was?
IS there a small piece of software to remap the softkeys on the home screen in TF3D? There are several useful functions that could be placed on the home screen other than the default Phone/Programs. I've tried using the Remap Softkeys for WM5 but obviously that doesn't work with TF3D, and I don't want to disable Touchflow just to get altered keys.
nubbin said:
IS there a small piece of software to remap the softkeys on the home screen in TF3D? There are several useful functions that could be placed on the home screen other than the default Phone/Programs. I've tried using the Remap Softkeys for WM5 but obviously that doesn't work with TF3D, and I don't want to disable Touchflow just to get altered keys.
Click to expand...
Click to collapse
try this
In a registry editor, go to:
HKLM/Software/HTC/manila/
HomeLSKPath, which is the left softkey (Standard = Phonepad)
And
HomeRSKPath, which is the right softkey.
If you change these with the location of the programs you want to link to, and simultaneous change the names:
HomeLSKText = Left softkey text
And
HomeRSKText = Right softkey text.
Thanks very much - worked a treat!
I'm trying to remap my softkeys on the People page. I want FunContact as my primary contact manager launchable from that page... cant seem to get it done with the technique used here... I had to create a new key for it but still nothing after soft reset
any help would be GREAT! Thanks
itsallsubliminal said:
I'm trying to remap my softkeys on the People page. I want FunContact as my primary contact manager launchable from that page... cant seem to get it done with the technique used here... I had to create a new key for it but still nothing after soft reset
any help would be GREAT! Thanks
Click to expand...
Click to collapse
i second that!!!
default contact is hard to use and scrolling is suck!
Try this link, it has more info about remapping soft keys in Manilla (TF3D) and also (TF2D)
http://forum.xda-developers.com/showpost.php?p=3292483&postcount=2
or the whole thread which has other good info.
http://forum.xda-developers.com/showthread.php?t=480475
Hope this works for you!
so this is for the right soft key:
TouchFlo 3D right softkey:
HKEY_LOCAL_MACHINE\Software\HTC\Manila
HomeRSKText = Text on softkey
HomeRSKPath = Path to program to run (or blank for default)
what do i put in the open "open" part so i can have my contacts open? and for the text to i just set it as "Contacts"?
Click to expand...
Click to collapse
its Windows/AppButtons/Contacts.lnk
I can't get it to work
Okay ... I've read all the post that I could find about changing the softkeys and nothing seems to work. I've changed the registry settings as indicated but still no go. I have the TMO TP2. I only want to change the home page so don't need anything fancy. Been updating the registry settings (HomeLSKText, HomeLSKpath, HomeLSKArguments) and can't get it to actually do anything (the text changes). What I want todo is to jump to the Contacts HTC page (really anything other than the Camera - why TMO did you make it Camera?). Any help would be great. Thanks.
This is what many touch pro/fuze owners want to have - ability to get full control over their keyboards.
This is for Raphael only! Do not try to install this on other devices!
Do not ask me to make a version for other device since my remappers are driver dependent and this can be very and very complicated without real device (if possible at all).
So, what is it ? It's a modified keyboard driver with configurator application for keys setup. Any key (yeah, i mean ANY, including Home and Back keys) can be reassigned to perform desired actions. Keys on a QWERTY keyboard are not an exception, they might be remapped too.
If any key has an action configured and is defined to be processed by my driver extension, it wouldn't go into the system. That is to say no one program even like AEButton will see key events processed by my driver.
Driver extension also can vibrate on any key press.
Modified drivers were tested on many ROMs based on different OEMs, so they would work in most cases.
Thanks dcd1182 for CDMA version testing.
Features:
Different event types supported: single, double and triple clicks, long presses
Two modes of key mapping: three actions per key or direct key mapping
Key repeats in direct key mapping mode
Actions sequence repeats in actions mode
Key combinations using FN modifier
Default key behaviour action - you won't loose key's default behaviour if you just want to add double click or long press to it
Different key behaviour depending on foreground process/window class/window text
Multiple rules for each key to provide different behaviour for each application you want
Multiple actions for each event
Different predefined actions:
Run program
Key press emulation
Send symbol/text to active window
Close active window
Switch to window by class/text
Terminate data connection
Wi-Fi toggle
BT toggle
Screen rotation
Power management (screen power toggle, suspend, reset)
Exceptions lists which are used to deny key remapping depending on foreground process/window class/window text
Configurable long press and double click duration
Configuration import/export in configurator
Changelog is located here.
Configurator UI localization support information is located here.
Requirements:
- .NET CF 2.0 (for configurator app)
- WM 6.1/6.5 compatible
Usage:
- Install SdkCerts.cab
- Install RaphKbdControl_XXX.cab
- Soft reset
- Check if keyboard works by pressing hardware buttons and seeing if they do their work, if not - uninstall cab, this wouldn't work on your current ROM
- If it works - go to the control panel and find "Keyboard Config" on a System page
How to define key processing:
- Run configurator (Control Panel -> System -> Keyboard Config)
- Press Menu -> Add key
- When dialog asking you to press key appears press and release desired key
- Set up needed options in key setup dialog and press OK (left softkey)
- In configurator's main window press left softkey "Update settings" to let new configuration take place (reboot is not needed, coz new settings will work immediately after saving)
What to do if keyboard doesn't work after uninstallation of this software:
- in any way stop device "KBD1:"
- for example, you can use Dotfred's TaskManager - navigate to Devices tab and find the KBD1: string, then press Stop
- delete files \Windows\keypad.dll and \Windows\kbdcntrl.dll
- soft reset
How to add new button to Buttons applet and get it working:
- add or copy existing key [HKLM\Software\Microsoft\Shell\Keys\40CX], where X is 1-6
- under this key add next values:
* Name - display name of the button in list (doesn't matter what you write here, it's only for you)
* Icon - path to icon for this button
- goto configurator and define an 'emulate key press' action for any button you want and set these values here: key code - 'App X' and check 'Win' checkbox - only in this case button will work
- save settings and enjoy newly created button
TODO:
- optimization
- Shift+?? key combinations support (if there would be requests on this)
- more actions
- other useful things
- your suggestions ?
Backup before installing of modified driver is strongly recommended.
Be careful when downloading the cab, make sure you choose the correct version suitable for your device.
Also, here is small collection of AltTab programs attached.
You can use any of them assigned as 'run program' action to desired key to switch between running programs.
well im going to try this right now, thanks
tested and works great.
side note: under the todo list adding different key behaviours depending on active window would be great
thanks
Push!
What a great app ! Couold you try to add something like multi-pressd ?
Glad to see something like this come along.
Curious, any plans to integrate with the Buttons applet found in Settings?
Cheers,
Again, excellent work!
luciusz said:
Couold you try to add something like multi-pressd ?
Click to expand...
Click to collapse
Do you mean key combinations ? I will think about it.
hilaireg said:
Curious, any plans to integrate with the Buttons applet found in Settings?
Click to expand...
Click to collapse
No. Although buttons applet and my extension do similar work, they work in different ways, so it's not possible to integrate them at this moment.
It is very cool program.
But it is not work with russian keyboard on official Rom
Or it's my mistake?
after uninstall app and soft reset do not work hardware keyboard,
and keys: on/off device (on the top side) and loudness (on left side)
What can I do?
Cool tool!!! If you implement to configure different behaviour for different programs that would be really nice!
Wow; this really does sound like the tool I was hoping for. (The hardware keyboard and the home/back etc keys? Perfect!)
Sadly, seems like the rom I am using (MightyROM5, for CDMA and Sprint) wasn't one of them... oh, well. If anyone else with CDMA has a ROM and tries this successfully, though, I'd love to know so I can try a different one.
For me, the hardware keys worked again after an uninstall and soft reset. (To turn the screen back on after it fell asleep while I was doing this, I had to hold the power key down as if I was going to force it to turn off, only longer than normal -- just a FYI if someone else has the same issue.)
ldrn said:
Sadly, seems like the rom I am using (MightyROM5, for CDMA and Sprint) wasn't one of them... oh, well.
Click to expand...
Click to collapse
Could you send me keypad.dll (hope CDMA version has the same name as for GSM) file from your ROM ?
is there a way to make a tab key ? i really would like one . i hate having to touch the screen to change entry feilds on the internet ,usually when i log into xda or myspace or anywhere that has a forums ..... i use it tons on my computer and thats pretty much my only complaint about the fuze keyboard ...NO TAB !
tarkim said:
Could you send me keypad.dll (hope CDMA version has the same name as for GSM) file from your ROM ?
Click to expand...
Click to collapse
This is the keypad.dll from MightyRom 4.16 (CDMA):
Two requests:
1.
Please let me execute .lnk files also, not only .exe files
2.
I cannot use arguments when calling exe files. Please support arguments when calling exe files in the next version.
Thanks for listening!
Oliver
gmanfuzing said:
is there a way to make a tab key ? i really would like one . ....
Click to expand...
Click to collapse
owilsky said:
Two requests:
1. Please let me execute .lnk files also, not only .exe files
2. I cannot use arguments when calling exe files. Please support arguments when calling exe files in the next version.
Click to expand...
Click to collapse
All these would be implemented in new version which I'm currently working on. Wait a few days and you'll get it
mcw
tnx for driver, will se what I can do
Nice!
Will this app let me remap the Volume Up/Down to Scroll Up/Down?
tarkim said:
mcw
tnx for driver, will se what I can do
Click to expand...
Click to collapse
Wow, thank you for taking a look at this! (And thanks Mcw for posting it.)
kusbainian said:
Will this app let me remap the Volume Up/Down to Scroll Up/Down?
Click to expand...
Click to collapse
yes
ldrn
i've analyzed CDMA keypad driver that mcw posted here, it's 90% similar to GSM version
i will patch it in a free time like my one, but i haven't a CDMA device to test it so you will need to test patched driver
Amazing app, exactly what I dream about, thanks!
I would also like to propose some more functions than just running app with keypress, like for example closing window, closing app, opening start menu, etc...
And, if anybody knows standalone symbols keypad replacement, with your superb program we can get rid of this problem: http://forum.xda-developers.com/showthread.php?p=3911050
I have an issue with this app, dunno why but only my storage card is available to search exe from, I'm unable to search exe from main memory, how comes?
Thanks