I tried searching but found nothing so it might just be an id10t error. With any Froyo ROM i install on my ATT N1, I can't download any files. The file begins to download just fine, but almost immediately ends with "download unsuccessful, the file size cannot be determined." I've tried different file managers, different settings, can't seem to figure it out. Anyone have any ideas?
ok from the deafening silence i guess no one else has this problem.
Related
as the title of the topic says i can't get KIES to install in order to upgrade to the latest froyo 2.2. i've searched the forums here at xda and so far haven't found a topic that would relate to the problem i'm having:
when i run the setup for KIES i get the error which is visible in the picture below. i have done some googling and as far as i can understand it the 2057.mst file is some localized language file where the KIES installer gets stuck and doesn't proceed. the funny thing is that the 2057.mst file is in the setup folder as i have circled it in the image below...
i've searched the internet for many hours now and i can't find the solution to the problem, which is mainly the inability to install froyo... i have used odin for previous flashes, however as i understand it the KIES flasher and the froyo firmware it applies isn't the same as the process in odin, therefore i'm desperate to get this thing working... if anyone has any advice or experience with the simillar problem any kind of help would be greatly appreciated
can any one help ? it gives me the error which reads vivo something and the zip file has errors.
The actual error message might be helpful.
How are you trying to flash this? Have you checked the MD5 on your download?
i installed the other radio, and it worked. Don't exactly know how, but PG32IMG_vivo_radio_3805.04.03.22_M wasn't working for me. Now it seems fine.
Hi all,
Here is an interesting finding from my i9000. I have recently found out this and don't know when or how it is happened..
I am not constanly checking my internet speed but realized a slowness in data transfer in my carrier while I'm on team hacksung's ICS build 12. When I run a test in speedtest.net's app, I couldn't get pass 45 kb/s even though 3g, HSPA and everything was on. I tried to narrow down the problem with trying with a different carrier and sim card; only to find same results. Tried my on sim card on a iphone (I know, but what you gonna do and reached 300-500 kb/s. So the problem was related to my phone...
Next, I decided to revert back to stock rom (XXJVU, latest one) to understand if it is rom related or not.. Apparantely it is not, I couldn't pass 45 kb/s once again. By the way I have formatted all (sdcard, data, datadata..) before flashing stock rom with odin. Now I'm back on ICS Build 13 from team hacksung and guess what..no change.
My basic knowledge limits me trying to investigate the source of the problem further so I kindly ask if someone has ever encountered something similar? I have searched XDA and net but found nothing similar.
Help is much appreciated..
I forgot to mention that I have tried different modems in CM9. No luck with the latest XXJVU modem as well (thanks_silkydude).
Check your build.prop file, it can be messed something... use this..., although written for another device - in my case works.
checked build prop, added the lines in the post you linked but no luck. The only difference is the speed lowered than the original prop. However let me remind you that I couldn't apply the attached zip file in CWM probably because I'm on ICS CWM.
Thanks anyway.
Here is the original build.prop for your review;
So I had some escapades today, I had my SGS running jellybean, then I tried to change the screen density and bang, bootloop. I panicked and after some odin fiddling managed to get it booting Darky using odin. I was in a room with no signal at the time so I thought nothing of not having any signal, even so I then went ahead and used recovery to reinstall my Jellybean rom since that's a bit nicer than the 2.3 Darky.
Long and the short of it is, I can search for networks in my options and it will find them, but when I tell it to connect to one it says "Can't connect to this network right now. Try again later"
I have tried later and surprise surprise it didn't work. I have tried installing a different radio, clearing the dvalik cache and fixing permissions as well as a few other things. Please can anyone suggest something, this seems to be a very uncommon scenario and it's stressing me out that I can't find any solutions.
alzrnb said:
So I had some escapades today, I had my SGS running jellybean, then I tried to change the screen density and bang, bootloop. I panicked and after some odin fiddling managed to get it booting Darky using odin. I was in a room with no signal at the time so I thought nothing of not having any signal, even so I then went ahead and used recovery to reinstall my Jellybean rom since that's a bit nicer than the 2.3 Darky.
Long and the short of it is, I can search for networks in my options and it will find them, but when I tell it to connect to one it says "Can't connect to this network right now. Try again later"
I have tried later and surprise surprise it didn't work. I have tried installing a different radio, clearing the dvalik cache and fixing permissions as well as a few other things. Please can anyone suggest something, this seems to be a very uncommon scenario and it's stressing me out that I can't find any solutions.
Click to expand...
Click to collapse
check apn settings?
slaphead20 said:
check apn settings?
Click to expand...
Click to collapse
Yeah I've checked them and unfortunately they all seem to be in order still, though there are a lot more settings than any website offers things to put in them
same problem
i am having this same problem on all cyanogenmod 7,9,10. i have tried many radio and modem flashes. i can scan and see networks, but i can never connect to them.
have you made any progress?
Problem is EFS folder which tends to do with IMEI.
To fix it you need to copy the backup EFS folder from your SDCARD to the root of your device. (/)
If you don't have a backup you'll have to ODIN back to stock and re-root....etcetera
Sent from my GT-P7500 using xda app-developers app
thx
thank you for the response. I put it back to stock lastnight before bed so i will give this a try.
i have the gti9000m from bell in canada. I updated it through kies to 2.3.3 gingerbread and it all went badly. It would boot up and load to the os be on for a bit then reset. It turned out to be wifi problem, running it on airplane mode stopped it from rebooting. Then if i tried to turn on wifi it would quickly reboot.
So then i tired all the cyanogenmods, which worked it stopped rebooting all the time. however the wifi would connect and work for about a minute then it would drop. doing the
1.turnOn gps
2.turnOn wifi
3. turnOff gps
this would let the wifi work again for about a minute. I tried all the wifi fixer apk, and a bunch of wifi.zip mods, and then ping the router gateway constantly, none solved this problem. Very annoying because i need the wifi working for develpoment of apps. I have spent a great many hours on this problem. lots of people seam to have this problem but no solutions have wokred for me.
So, my questions are....
1. does your wifi work?
2. how the heck do i get mine to work?
back to stock
After going back to stock then upgrading connecting to network operators is fine.
wifi is still broken though
I have an SCH-i800 that I have CM9 (p1c 9.1.0) installed on. I have been using it for several weeks with no problem. Since I am planning on going on a trip, I decided to active pre-paid Verizon service for the tablet. At first, I attempted to activate the device. It went through the phone call but after a minute, it just sat at activating. That is when I noticed that the radio state in the status bar had an X on it. I rebooted the tablet to try again and got "com.android.phone has topped unexpectedly". I re-flashed CM9 (at the time I was using 9.0.0) and it worked again. Activation was not necessary. After a day, the error came up again and radio state went to off with an X. I tried 9.1.0, same problem after a day. I even tried a nightly CM10, same problem. Reboots, cache wipes, permission fixes do not make it work. The error persists until a re-flash of CM. I see on the Support Downloads for the Verizon Tablet, there are two modem files. My baseband version is currently S:I800.0.3V.EI04. I have attempted to "flash" these both via Odin (which failed after a couple minutes) and ZIP (which looked like it worked) to the EC02 on the site, but my baseband doesn't seem to change.
So my first question is, is there a how-to on flashing as I have searched high and low on one for the Verizon Tab specifically, and have yet to find one. Is there a ZIP file that is specifically meant for the i800? I am almost certain this is my problem and that a downgrade (this tablet when stock was updated to the latest Verizon image).
My second question is, has anyone else experienced this? Is there someone that is using a CM9 Verizon tab with EI04 baseband and not have this problem?
Is there a way I can track down what crashed the program? I have tried logcat, but it doesn't appear to give me much detail other than to tell me that it stopped.
And if you ask, no I did not use the Verizon service with this tablet before putting CM9 on it, so I wouldn't know if it worked before.
Any input that someone could provide would be useful. Thanks!