K_K have found the problem of eclair BT Audio - The Firmware. He posted an update for his vaniljeclair. Polymod have a version with working BT Audio.
DOWNLOAD:http://www.mediafire.com/?yng2o3mtjtd - Version with the firmware only. You can use this in any build
thebulletfromhell said:
DOWNLOAD:http://www.mediafire.com/?yng2o3mtjtd - BT Firmware only. No extra file
Click to expand...
Click to collapse
In fact that file you put up contains some other files aswell but none that should harm any other build.
The same file can be downloaded here: http://forum.xda-developers.com/showthread.php?t=700669 (the attachment)
kallt_kaffe said:
In fact that file you put up contains some other files aswell but none that should harm any other build.
The same file can be downloaded here: http://forum.xda-developers.com/showthread.php?t=700669 (the attachment)
Click to expand...
Click to collapse
Legendary man thanks!, is the getprop file part of the fix or just the firmware?
*M* said:
Legendary man thanks!, is the getprop file part of the fix or just the firmware?
Click to expand...
Click to collapse
Just the firmware. The other things was to fix things in my own CM port but they shouldn't harm any other build either.
next up is just the camera and a little further optimizing and eclair is fully functional
excuse my ignorance. bit of a noob here...
2 questions please
how exactly do i install this update?
can this update be used on doughnut?
piperthedj said:
excuse my ignorance. bit of a noob here...
2 questions please
how exactly do i install this update?
can this update be used on doughnut?
Click to expand...
Click to collapse
donut already has working bluetooth audio unless it is a sense build, so you dont need to install this update
Confirmed that this works on Myn's Warm Eclair. Thumbs up!
Wow guys this is fantastic news! The only thing keeping me from eclair was no BT!
This is a2dp or just audio for phone calls?
you say firmware, but that doesn't sound right, especially since this would be a software update.
radar5 said:
you say firmware, but that doesn't sound right, especially since this would be a software update.
Click to expand...
Click to collapse
It's a file in the filesystem that contains firmware for our bluetooth chip. It's nothing that is permanently installed on the phone.
radar5 said:
you say firmware, but that doesn't sound right, especially since this would be a software update.
Click to expand...
Click to collapse
There's a binary firmware file for the bt chipset under /system/etc/firmware. that's what got updated, not the phone 'firmware'
Edit: jinx!
Good pickup on this guys!
radar5 said:
you say firmware, but that doesn't sound right, especially since this would be a software update.
Click to expand...
Click to collapse
This is how Linux works. I've installed Ubuntu on a few machines, and sometimes you need to extract the firmware for it to work. Like if you want Wifi working, it'll need to dump a copy of the firmware. Considering Android is Linux based, makes sense that it does this too. I never understood why Linux needs this, as I don't think Windows does this. Wonder if this is the same reason why camera doesn't work in Eclair either?
BTW, nice work thebulletfromhell. You just made my day. Time to install Eclair.
thanks guys. Hopefully myn will incorporate in his next build.
xport said:
This is a2dp or just audio for phone calls?
Click to expand...
Click to collapse
In "Music" app in Warm Eclair the audio does not route to my A2DP/Handsfree device. In call audio gets routed to the device though. Anyone have thoughts on this?
rephlexive said:
In "Music" app in Warm Eclair the audio does not route to my A2DP/Handsfree device. In call audio gets routed to the device though. Anyone have thoughts on this?
Click to expand...
Click to collapse
I think that is as good as it gets at the moment. I don't think that have ever worked in Eclair for us. I've done some experimenting with the bluez config files but I didn't make any progress.
Dukenukemx said:
BTW, nice work thebulletfromhell. You just made my day. Time to install Eclair.
Click to expand...
Click to collapse
Actually kallt_kaffe figured this one out. thebulletfromhell just brought the news to the Vogue Android forum.
milanche said:
Actually kallt_kaffe figured this one out. thebulletfromhell just brought the news to the Vogue Android forum.
Click to expand...
Click to collapse
this news ought to have spread like wildfire here.
every eclair build will have this.
I just don't care to try any other build now that we have kallt_kaffe's VaniljEclair build.
Related
Hi guys i have been looking around on google xda etc. but there is nothing about running htc hero on xperia using haret, does anyone knows if this is possible . thanks in advance
First HTC Hero is a device, not something that run.
Probably you mean Hero's interface, HTC Sense. AFAIK is not ported yet.
thats what i mean im dont know much about the htc devices
Actually I've uses the Hero Rosie package from Blackstone, and it sucks. Not only it doesn't fit WVGA properly, but like sense on WM6, it's slow and takes ages to load. Plain android is no worse, I should say
i said what I wanted to boy...I too want a HTC Hero UI on my X1...i think it is by far THE best device by HTC..of course there are HD2 and all, but they have come later...
sp3dev said:
Actually I've uses the Hero Rosie package from Blackstone, and it sucks. Not only it doesn't fit WVGA properly, but like sense on WM6, it's slow and takes ages to load. Plain android is no worse, I should say
Click to expand...
Click to collapse
can you tell us how you got it for wm6? i would really appreciate it
http://forum.xda-developers.com/showthread.php?t=641021
@shaban123
Well, I meant wm6.1 of course. Well, wm6 and wm5 can be ported to xperia, but it makes no sense. Just go to the Xperia ROM section and pick up any 'Leo' rom if you want sense for wm6.1/wm6.5
dexteral said:
http://forum.xda-developers.com/showthread.php?t=641021
Click to expand...
Click to collapse
Is this compatible with xperia ?
shaban123 said:
Is this compatible with xperia ?
Click to expand...
Click to collapse
not sure , will try on weekend. why not ask on that thread
dexteral said:
not sure , will try on weekend. why not ask on that thread
Click to expand...
Click to collapse
haha good point
shaban123 said:
Is this compatible with xperia ?
Click to expand...
Click to collapse
HI SHABAN DID U TRY THIS Android 2.1 with HTC SENSE ON XPERIA
http://forum.xda-developers.com/showthread.php?t=641021
IF SO DID IT WORK? I TRIED BUT THE SCREEN IS UPSIDE DOWN, THE CALIBRATION IS NOT WORKING, AND SOMETIME IT JUST STUCK ON BOOTSCREEN.
ANY HELP FROM ANYONE AS TO WHAT FILES TO COPY ON XPERIA??
dexteral said:
HI SHABAN DID U TRY THIS Android 2.1 with HTC SENSE ON XPERIA
http://forum.xda-developers.com/showthread.php?t=641021
IF SO DID IT WORK? I TRIED BUT THE SCREEN IS UPSIDE DOWN, THE CALIBRATION IS NOT WORKING, AND SOMETIME IT JUST STUCK ON BOOTSCREEN.
ANY HELP FROM ANYONE AS TO WHAT FILES TO COPY ON XPERIA??
Click to expand...
Click to collapse
i already tried it but i wont even boot for me :O
shaban123 said:
i already tried it but i wont even boot for me
Click to expand...
Click to collapse
just use the current startup and the zimage, and copy the rest of the files. It should boot, it did for me once or twice
dexteral said:
just use the current startup and the zimage, and copy the rest of the files. It should boot, it did for me once or twice
Click to expand...
Click to collapse
okay will try that
shaban123 said:
okay will try that
Click to expand...
Click to collapse
I tried it and it sucks!
for me it booted once and on the next boot writes "no system.img on SD Card"
wtf///
Reanrean said:
I tried it and it sucks!
for me it booted once and on the next boot writes "no system.img on SD Card"
wtf///
Click to expand...
Click to collapse
look here Musse_1's post
http://forum.xda-developers.com/showthread.php?t=661323&page=3
Just in case, I'm using
package_sense_hero_rosie_140310.tar.gz with rootfs_use_if_pbs_booting.img renamed to rootfs.img on my X1. Wifi doesn't work (well, I guess it will work once i put calibration and fix the init script but I don't care), but sound does (with the zImage from the nearby thread), and mic works for sound calls and voice command. Ok, I'll take my time to fix the issues and repackage the image. Still Sense sucks in WVGA. And a small hint to android users: if you want OpenGL and other cool things, launch the camera application before launching your desired app. That'll also make sense faster
http://img215.imageshack.us/img215/8291/img006rl.jpg - my xperia with sense and htc player
sp3dev said:
Just in case, I'm using
package_sense_hero_rosie_140310.tar.gz with rootfs_use_if_pbs_booting.img renamed to rootfs.img on my X1. Wifi doesn't work (well, I guess it will work once i put calibration and fix the init script but I don't care), but sound does (with the zImage from the nearby thread), and mic works for sound calls and voice command. Ok, I'll take my time to fix the issues and repackage the image. Still Sense sucks in WVGA. And a small hint to android users: if you want OpenGL and other cool things, launch the camera application before launching your desired app. That'll also make sense faster
http://img215.imageshack.us/img215/8291/img006rl.jpg - my xperia with sense and htc player
Click to expand...
Click to collapse
Thanks for your input
I am using base_package0704.tar.gz + rootfs-20100414-f4f483c.zip + system1304.sqsh & downloaded latest kernel from "glemsom.anapnea.net/android/htc-msm-android" of course using drlucky's zImage. However i didn't manage to get sound working (vibrate is), shutdown is working...
Screen upside down since fatsal had to patch android driver for kovsky to initialize panel the correct way. I am not a programmer but believe it will need to be included in system.sqsh. I will give it try with set of files you're using and report on sound as well as overall impressions comparing to what I'm running
sp3dev said:
Just in case, I'm using
package_sense_hero_rosie_140310.tar.gz with rootfs_use_if_pbs_booting.img renamed to rootfs.img on my X1. Wifi doesn't work (well, I guess it will work once i put calibration and fix the init script but I don't care), but sound does (with the zImage from the nearby thread), and mic works for sound calls and voice command....
Click to expand...
Click to collapse
tried quickly with set of files above no sound...+ doesn't contain htc sense
as you see from my prev post, set of files I'm using, from gives a custom android 2.1 with HTC Sense look. from same thread "Sound" is among features requested for next release.
we are thankful if you could fix the init script so we can have wifi working
Being a Linux guy, all these batch files have been driving me mad
Anyways, in an effort to benefit from all the great development that has been going on around the Atrix, I started converting some of the batch files to Bash scripts, for me, and my Linux brethren to to enjoy. However, I quickly realized this was creating parallel development paths, and scripts presented limitations that were becoming hard to manage, so I decided to create an Android App. My hope is this will provide a more universal appeal, and remove host OS dependencies.
After a couple of weeks of getting up to speed on Java, I now present the “Atrix Webtop Unlocker” Android Application! This is very much a work in progress, but with feedback from the community, we will be able to improve the app to the point it will be very user friendly and useful.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
In a nutshell, this application is the Android version of Sogarth's wonderful script: http://forum.xda-developers.com/showthread.php?t=1000316
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Like all of my other projects, this is open source, and available for download at: https://github.com/mistadman/Atrix-Webtop-Unlocker, or via an apk binary download attached to this post.
I eagerly await your feedback and input!
Last, but not least, thanks goes out to--in no particular order--Sogarth, bartsplanet, godwin1981, Ririal, Fenny, and all the rest of the XDA Community! A lot of what you did heavily influenced the development of this app. Also, if I left anyone out, I apologize in advance.
***NOTE - At this time, this app requires your device to be rooted and has only been tested on AT&T v1.57.
*** So one bug I am sure some will encounter is the rotation bug. I have to make AsyncTask play nice with Activities that are destroyed during screen rotations. Fix coming soon, but in the mean time, try not to rotate the phone while running this app :-( ...Did I mention this was work in progress? LOL!
I wont have time to mess with it til Sunday, but ill test it out then and let you know how it goes.
Sent from my MB860 using XDA App
does it have to be stock launcher? I'm having issues setting up LXterminal off of Gingerblur 3.1.
Correction: Gingerblur 3.1 has some problems with it...i've done 2 flashes and tried 1.5.7 with and without 3.1 and i do notice that Webtop mode has some problems with Firefox specifically and LXterminal is missing.
Is there a chance of this working on 1.8.3?
Sent from my MB860 using XDA App
XxKILLx3RxX said:
Is there a chance of this working on 1.8.3?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
in theory it should since the webtop is the same version on 1.5.7
Mafisometal said:
in theory it should since the webtop is the same version on 1.5.7
Click to expand...
Click to collapse
Actually, it's not. There are quite a few differences between the 1.57 and 1.83 webtops. They removed a lot of binaries and changed some things around. Be wary installing this on 1.83, it'll probably break your webtop and you'll have to reflash.
Ririal said:
Actually, it's not. There are quite a few differences between the 1.57 and 1.83 webtops. They removed a lot of binaries and changed some things around. Be wary installing this on 1.83, it'll probably break your webtop and you'll have to reflash.
Click to expand...
Click to collapse
yeah you're right, i finally got it running and it broke my Firefox, File Manager, and just about every program accessible. It WILL install but it won't function properly. I was under the assumption since 1.83 didn't really affect 1.57 in any major ways besides the HSUPA unlock update that it was the same. On the version notes, it does say the same version on mine though....i don't know why they call it the same when its not.
FYI guys,
My app does not modify/touch the original /osh directory, so at the worse, you will just need to remove the /data/ubuntu.disk file, reboot, and you're back to stock Webtop. No re-flash necessary if something goes wrong.
Mafisometal said:
yeah you're right, i finally got it running and it broke my Firefox, File Manager, and just about every program accessible. It WILL install but it won't function properly. I was under the assumption since 1.83 didn't really affect 1.57 in any major ways besides the HSUPA unlock update that it was the same. On the version notes, it does say the same version on mine though....i don't know why they call it the same when its not.
Click to expand...
Click to collapse
Hmmm. What you can try is downloading the GladiAtrix3 beta I have, and pulling the domain_policy.conf from the lxterminal folder inside the zip and installing it onto your phone. See if that fixes anything. The issue is that all the versions are different, and tomoyo just says "**** no" to everything you try to run because it's not specifically allowed in the policy. The file in GA3 is from a 1.83 webtop, modified to allow awn and lxterminal to run unrestricted.
EDIT: I'll just attach the file, it's easier for everyone Let me know if it fixes anything
EDITEDIT: Make sure you're replacing the file in the loaded image, not in the stock /osh directory.
Ririal said:
Hmmm. What you can try is downloading the GladiAtrix3 beta I have, and pulling the domain_policy.conf from the lxterminal folder inside the zip and installing it onto your phone. See if that fixes anything. The issue is that all the versions are different, and tomoyo just says "**** no" to everything you try to run because it's not specifically allowed in the policy. The file in GA3 is from a 1.83 webtop, modified to allow awn and lxterminal to run unrestricted.
EDIT: I'll just attach the file, it's easier for everyone Let me know if it fixes anything
EDITEDIT: Make sure you're replacing the file in the loaded image, not in the stock /osh directory.
Click to expand...
Click to collapse
alright cool, thanks, seems like it's working great.
EDIT: Also, just so everyone knows...1.8.3 breaks webtop. I've done a few flashes from stock 1.2.6, 1.5.7, and finally 1.8.3...the sbf breaks webtop functionallity.
mistadman said:
*** So one bug I am sure some will encounter is the rotation bug. I have to make AsyncTask play nice with Activities that are destroyed during screen rotations. Fix coming soon, but in the mean time, try not to rotate the phone while running this app :-( ...Did I mention this was work in progress? LOL!
Click to expand...
Click to collapse
I didn't encounter that problem when i had it on lapdock.
Mafisometal said:
EDIT: Also, just so everyone knows...1.8.3 breaks webtop. I've done a few flashes from stock 1.2.6, 1.5.7, and finally 1.8.3...the sbf breaks webtop functionallity.
Click to expand...
Click to collapse
I've done the same thing (sbf 1.2.6 -> 1.5.7 -> root -> webtop unlocker -> 1.8.3 -> gingerblur) but I lost completly entertainment center and webtop.
Removing webtop unlocker I restored entertainment center. Reflashing gingerblur webtop over hdmi still won't work.
Ririal said:
Actually, it's not. There are quite a few differences between the 1.57 and 1.83 webtops. They removed a lot of binaries and changed some things around. Be wary installing this on 1.83, it'll probably break your webtop and you'll have to reflash.
Click to expand...
Click to collapse
I wanna say both of you and OP are correct.If you are under stock 4.1.83 webtop files,they are different from 4.1.57..But if you have done webtopmod cracked,the file will be replaced by v 4.1.57 cracked files.
godwin1981 said:
I wanna say both of you and OP are correct.If you are under stock 4.1.83 webtop files,they are different from 4.1.57..But if you have done webtopmod cracked,the file will be replaced by v 4.1.57 cracked files.
Click to expand...
Click to collapse
Well, no. The webtop mod uses your current /osh as a base. The problem is that it's making a lot of assumptions from 1.57 files. Things got changed up in 1.83, and it causes problems.
If you're talking about the webtop through HDMI mod, then we're talking about two completely different things
Ririal said:
Well, no. The webtop mod uses your current /osh as a base. The problem is that it's making a lot of assumptions from 1.57 files. Things got changed up in 1.83, and it causes problems.
If you're talking about the webtop through HDMI mod, then we're talking about two completely different things
Click to expand...
Click to collapse
I think you are correct.
so this its working on .83 ????
zen kun said:
so this its working on .83 ????
Click to expand...
Click to collapse
No...
Sent from my MB860 using XDA App
Hi,OP.
when will you release the updated version for V4.1.83?
Is this apk going to be updated? I want to test the latest version...
arvati said:
Is this apk going to be updated? I want to test the latest version...
Click to expand...
Click to collapse
I second that! I would love to have something like this for the latest version of webtop... there has been a lot of neat stuff going on with it, but everything is scattered about. I would love for someone who has knowledge in this area to pull everything together.
for the rotation issue.. in the manifest.. on the activity.. set android:configChanges="orientation" ..
Try Alien! This ROM is deprecated.
http://forum.xda-developers.com/showthread.php?t=1186537
waiting ever so patiently.
Nice......
thanks a lot kenneth.
please also include the procedure on bow to install and the requirements.
+1 ........
Thanks a lot, I guess I'll fire up the Atrix in a few...
Are there issues with this like the other Gingerbread build?
His phone is bricked, I doubt he has much info on this except its an alpha build
DanDroidOS said:
Are there issues with this like the other Gingerbread build?
Click to expand...
Click to collapse
No, because this one's made for AT&T devices. There may be issues with my implementation, though.
Link posted for download. Please read warnings. This is an alpha tester's release.
radio image cannot be installed via cwm recovery...
trying to install it via fastboot...
kennethpenn said:
No, because this one's made for AT&T devices. There may be issues with my implementation, though.
Click to expand...
Click to collapse
Cool thanx bro, I really appreciate you taking the time to put this together for us when you don't even have a working Atrix!
Downloading
Thanks kenneth,
downloading right now.
nice! will try it out tomorrow.
Alpha 2 uploading.
kamma said:
radio image cannot be installed via cwm recovery...
trying to install it via fastboot...
Click to expand...
Click to collapse
radio flashed via fastboot correctly.
you have to wipe userdata partition, else it goes to bootloop...
So far it installed but the screen senses input in the wrong spots. (very hard to type anything accurately)
big issue - touchscreen reverted
signal indicator shows one bar all the time...
File still uploading?
I am trying to download the file. Each time I do when I try and open it and get a error messaging using winrar. I try and download again and each time it's a different file size. I think the person is still uploading the file as we speak.
tl_bull said:
So far it installed but the screen senses input in the wrong spots. (very hard to type anything accurately)
Click to expand...
Click to collapse
kamma said:
big issue - touchscreen reverted
signal indicator shows one bar all the time...
Click to expand...
Click to collapse
Known bug. Can't confirm signal indicator, though.
I've uploaded a fully deodexed version of this OTA. (Thanks for your files cmlusco)
Changed:
1) build.prop screen size to 3.7"
MD5: a8dc54e9682ef5db387b6d129c00b5c4 *inc_signed_4.06.605.3_OTA.zip
Download 4.06.605.3 9/3/11 (2.3.4)
Enjoy!
Download Location Nag Removal for new OTA's
Flashable zip to Remove Droid Boot Sound
Reserved.....
One more .........
Cool, thanks dude!
donnyp1 said:
Cool, thanks dude!
Click to expand...
Click to collapse
Anytime Donny!
jermaine151 said:
Boot animation to a more interesting one without increasing the file size too much.
build.prop screen size to 3.7"
Click to expand...
Click to collapse
How do I change the Boot animation back? I would like to keep things as close to stock as possible and just remove the bloat.
ryanmc2033 said:
How do I change the Boot animation back? I would like to keep things as close to stock as possible and just remove the bloat.
Click to expand...
Click to collapse
Move the VZW_bootanimation.zip from /system/removed to /system/customize/resource and reboot.
Hey jermaine thanx a ton for this! gonna try this bad boy out. I have a noob question that I've been dying to get answered if you dont mind. I am completely hooked on sense 3.0, mainly for the lockscreen/quick launch apps and the newer Cam with Panorama. I was wondering if any sense 3.0 can be used with the OTA. I dont mean like right now, but will it be possible in the future? Thanks a ton man, great job!
Please add the notification pulldown settings widget.
and thanks for this
TokedUp said:
Hey jermaine thanx a ton for this! gonna try this bad boy out. I have a noob question that I've been dying to get answered if you dont mind. I am completely hooked on sense 3.0, mainly for the lockscreen/quick launch apps and the newer Cam with Panorama. I was wondering if any sense 3.0 can be used with the OTA. I dont mean like right now, but will it be possible in the future? Thanks a ton man, great job!
Click to expand...
Click to collapse
It's possible. Would just need tweaking around. Libs moved/ported.
http://www.androidcentral.com/droid-incredible-gingerbread-update-delayed
Looks like Verizon wasn't ready.
"More Testing"
another feature which would be useful is home screen looping
Hey jermaine, can this be flashed over incubus's ROM? Just wondering. Thanks.
Smokeey said:
http://www.androidcentral.com/droid-incredible-gingerbread-update-delayed
Looks like Verizon wasn't ready.
"More Testing"
Click to expand...
Click to collapse
Is this why nobody is posting the radio, or...
frostincredible said:
Hey jermaine, can this be flashed over incubus's ROM? Just wondering. Thanks.
Click to expand...
Click to collapse
Yes it can be just wipe dalvik first. Worked great for me to get fully deodexed.
Sent from my ADR6300 using XDA Premium App
vwftw said:
Is this why nobody is posting the radio, or...
Click to expand...
Click to collapse
Only the ROM was leaked; not the radio. There is a prior "leak" of a radio (5.06) available elsewhere in the Incredible Development forum but the "new" radio version will be 7.07, according to the PDF's in the Verizon website leaked on Monday.
What the "bugs" are delaying the OTA is anybody's guess; it could be the radio, it could be features of the ROM. Verizon Wireless is usually very fussy about this stuff (for the most part, notwithstanding all the issues with the original Sensation and Thunderbolt releases).
FB for HTC Sense doesn't work for me.
hgoldner said:
Only the ROM was leaked; not the radio. There is a prior "leak" of a radio (5.06) available elsewhere in the Incredible Development forum but the "new" radio version will be 7.07, according to the PDF's in the Verizon website leaked on Monday.
What the "bugs" are delaying the OTA is anybody's guess; it could be the radio, it could be features of the ROM. Verizon Wireless is usually very fussy about this stuff (for the most part, notwithstanding all the issues with the original Sensation and Thunderbolt releases).
Click to expand...
Click to collapse
actually no radio because we were given explicit instructions not to leak the ruu or radio......
Doesn't removing Footprints, Stocks, and their accompanying widgets leave broken shortcuts in some of the menus or something? I thought thats how it was with Froyo Virtuous?
JoelZ9614 said:
actually no radio because we were given explicit instructions not to leak the ruu or radio......
Click to expand...
Click to collapse
Well I am satisfied with that answer. Thanks for giving it to us straight!
Introduction:
This is a restore zip for restoring/debricking a molly device (ADT-1).
The contents are as close to stock as possible, and is intended to fix broken otas.
Click to expand...
Click to collapse
File List:
update-molly-Stock-LPV79-1.zip
Click to expand...
Click to collapse
FAQ:
Will this fix my <non molly device>?
No, this rom is only for mollys, it will brick any other device.
Will OTAs work after flashing this?
Yes, that is the purpose of this
Do I need to be on a certain bootloader to use this?
No, it includes the original bootloader.
Do I need a custom recovery to flash this?
Yes, the stock recovery will not accept update zips that are not signed by google
Is this rooted?
No, the stock rom is not rooted, neither is this
My device won't finish booting after flashing.
If you were not originally on the same rom, you may need to do a factory reset to finish the process. Android does not like rom downgrades without a factory reset
Click to expand...
Click to collapse
Changelog:
Nov 3, 2014: Initial Page
Click to expand...
Click to collapse
2char
I made a gallery of it because I felt like it: Update - Imgur
Awesome! Thanks! I needed a way to restore my OTA abilities after rooting and doing some testing for someone. Did you make these yourself? And how? If you don't mind me asking. I didn't think dd would work without root.
death2all110 said:
Awesome! Thanks! I needed a way to restore my OTA abilities after rooting and doing some testing for someone. Did you make these yourself? And how? If you don't mind me asking. I didn't think dd would work without root.
Click to expand...
Click to collapse
All custom recoveries have root by default, my ADT1 isnt rooted, I did all my work though CWM.
TheManii said:
All custom recoveries have root by default, my ADT1 isnt rooted, I did all my work though CWM.
Click to expand...
Click to collapse
Duh. Didn't think of that... Haha. Thanks!
Could someone who has updated to LPX13D please post a system dump? Im needing it for an OUYA port that im working on. Thanks
It's already been posted here:
http://forum.xda-developers.com/showpost.php?p=56186872&postcount=69
death2all110 said:
It's already been posted here:
http://forum.xda-developers.com/showpost.php?p=56186872&postcount=69
Click to expand...
Click to collapse
Thanks, never would have found it there.
TheManii said:
2char
Click to expand...
Click to collapse
Thanks! Do you have to have a USB keyboard in order to move around in CWM on the ADT-1?
ScubaXsays said:
Thanks! Do you have to have a USB keyboard in order to move around in CWM on the ADT-1?
Click to expand...
Click to collapse
Yes a USB keyboard is needed to move around CWM on the ADT-1
death2all110 said:
Yes a USB keyboard is needed to move around CWM on the ADT-1
Click to expand...
Click to collapse
Thanks so much for the quick response, you're the best.
ScubaXsays said:
Thanks so much for the quick response, you're the best.
Click to expand...
Click to collapse
No problem. I had the same problem initially
death2all110 said:
Yes a USB keyboard is needed to move around CWM on the ADT-1
Click to expand...
Click to collapse
ScubaXsays said:
Thanks so much for the quick response, you're the best.
Click to expand...
Click to collapse
Yes you need a usb keyboard to use CWM currently, there may be an update in the future to enable the dev button on the back to select in cwm like it does in fastboot. Until if/when that happens you either need a keyboard or to do everything manually via adb.
I don't have a keyboard however, I did all my work/testing with only adb.
TheManii said:
Yes you need a usb keyboard to use CWM currently, there may be an update in the future to enable the dev button on the back to select in cwm like it does in fastboot. Until if/when that happens you either need a keyboard or to do everything manually via adb.
I don't have a keyboard however, I did all my work/testing with only adb.
Click to expand...
Click to collapse
Thanks for the articulate follow-up. I started to do things manually via ADB. :good:
anyone can post a complete lpx13D CWM backup , stock recovery or at least system.img
I've messed up my ADT1 and it can't seem to take the image I've found yet
@TheManii Are there any custom roms or anything like that for the ADT-1? I just got one in the mail from I assume google. I'm ready to begin , but I don't honestly know what people are interested in seeing on this device I have a madcatz mojo using all the adt-1 binaries except audio running cm-12 and android tv from this device. So if anyone is interested in that let me know please.
Unjustified Dev said:
@TheManii Are there any custom roms or anything like that for the ADT-1? I just got one in the mail from I assume google. I'm ready to begin , but I don't honestly know what people are interested in seeing on this device I have a madcatz mojo using all the adt-1 binaries except audio running cm-12 and android tv from this device. So if anyone is interested in that let me know please.
Click to expand...
Click to collapse
Hello UD,
There isn't any custom roms for the ADT-1 (So yours would be the first)
I for one would love to see a more recent build than the last OTA (LPX13D - OCT 29th) There have been rumors that we'd get the final Android Lollipop but nothing has surfaced.
How much work is involved in rolling an AOSP+ADT-1 Binaries+Android TV dependencies?
Cheers Rob.
halfluck said:
Hello UD,
There isn't any custom roms for the ADT-1 (So yours would be the first)
I for one would love to see a more recent build than the last OTA (LPX13D - OCT 29th) There have been rumors that we'd get the final Android Lollipop but nothing has surfaced.
How much work is involved in rolling an AOSP+ADT-1 Binaries+Android TV dependencies?
Cheers Rob.
Click to expand...
Click to collapse
It's possible https://www.youtube.com/watch?v=Og-GDeRhJno but I could not get all the apps correctly working the main one being playstore , but I will try again look at the android build number and build date. I basically made a google apps package based on the adt-1 this is before I had one so possibly now I can get us an aosp 5.0.2 base working the Mojo in terms of hardware is similar to the adt-1 and for me to boot 5.0 on the mojo I needed adt-1 updated tegra 4 binaries so this shouldn't be hard at all once I work out the playstore issues.
Unjustified Dev said:
It's possible https://www.youtube.com/watch?v=Og-GDeRhJno but I could not get all the apps correctly working the main one being playstore , but I will try again look at the android build number and build date. I basically made a google apps package based on the adt-1 this is before I had one so possibly now I can get us an aosp 5.0.2 base working the Mojo in terms of hardware is similar to the adt-1 and for me to boot 5.0 on the mojo I needed adt-1 updated tegra 4 binaries so this shouldn't be hard at all once I work out the playstore issues.
Click to expand...
Click to collapse
Wow that is really impressive work, The current build on the ADT-1 is flaky at best for me, i'd love to see how a more recent build performs and if it prevents me from having to do a daily reboot.
Cheers Rob.
@Unjustified Dev just got mine on Tuesday. are you thinking releasing sources on your team github. i saw that a device and kernel repository was created but they are empty.
PS: nice to talk to you again been a while.