Now works on 32bit and 64bit Linux
Just a quick guide on how to configure Linux for file transfers using MTP. I wrote the instructions and config for Ubuntu Natty 32bit and 64bit, though the same process will work on other platforms - the only real difference being the package manager commands and possibly the config file locations.
The attached files are for the Galaxy Tab 10.1v but should work for the 10.1g / 10.1 as well. See the end of the post to learn how to modify this config to work for other devices.
How to configure for gMTP and other Media Sync tools
1) Install aptitude
Code:
sudo apt-get install aptitude
2) Install mtp-tools and mtpfs
Code:
sudo aptitude install mtpfs mtp-tools
3) Download the attached file ( View attachment 98-gtab.zip for 32bit Linux or View attachment 98-gtab.rules-AMD64.zip for 64bit Linux ) to your desktop.
4) Extract the 98-gtab.rules file to your desktop
5) Copy the rules file to /etc/udev/rules.d/
Code:
sudo cp ~/Desktop/98-gtab.rules /etc/udev/rules.d
6) Reboot
7) Connect your Tab
8) Run the following command to confirm it is working:
Code:
ls /dev | grep gtab
...which should return "gtab" if successful. If not, follow the "Modifying" guide below.
9) Download / install gMTP
Code:
sudo apt-get install gmtp
10) Open gMTP and select "connect" from the menu
11) Hit the thanks button
12) Go nuts!
Setting up for Automount (Optional, but recommended)
***You must have completed Steps 1-8 above before proceeding***
1) Edit your fstab file to add your gtab:
Code:
sudo gedit /etc/fstab
2) Add this to the end of the file:
Code:
#gtab
mtpfs /media/gtab fuse user,noauto,allow_other 0 0
3) Save and exit
4) Open fuse.conf for editing:
Code:
sudo gedit /etc/fuse.conf
5) Find the following line and remove the #
Code:
#user_allow_other
6) Save and exit
7) Open and edit the groups file:
Code:
sudo gedit /etc/group
8) Find the details for the group 'fuse' and append your username to the end of the line eg.
Code:
fuse:x:104:<YOUR USER NAME>
9) Save and exit
10) Create the folder to mount your Tab:
Code:
sudo mkdir /media/gtab
11) Take ownership of the folder:
Code:
sudo chown <YOUR USER NAME>:users /media/gtab
12) Reboot
13) Plug in your Tab.
14) Click on the Places menu and click gtab.
15) You're in business!
Modifying for other devices
If the above doesn't work immediately on the 10.1g / 10.1 (I have only tested on the 10.1v), you can easily edit the rules file to support your device.
1) Install lsusb
Code:
sudo apt-get install lsusb
2) Run lsusb
Code:
lsusb
3) Check the output of this command to find your device. The 10.1v is shown like this:
Code:
Bus 001 Device 010: ID 04e8:6860 Samsung Electronics Co., Ltd
4) Make a note of the Vendor and Product IDs. In the example above, the vendor ID is 04e8 and device ID is 6860 (note 04e8:6860 in the output).
5) Open the rules file for editing (if it's not already in /etc/udev/rules.d, copy it there now)
Code:
sudo gedit /etc/udev/rules.d/98-gtab.rules
6) Find this line:
Code:
ATTRS{idVendor}=="04e8", ATTRS{idProduct}=="6860", MODE="0666" SYMLINK+="gtab"
7) Replace the Vendor ID (04e8) and Product ID (6860) with the ones that you got from step 3 above.
8) Save and exit
9) Reboot
10) Follow step 7 onward in the first guide above
11) Hit the thanks button
If you modify it for a particular device, please post the contents of your new 'rules' file here.
32bit RULES FILE:
Code:
ACTION!="add", GOTO="gtab_rules_end"
SUBSYSTEM!="usb|usb_device", GOTO="gtab_usb_end"
ATTRS{idVendor}=="04e8", ATTRS{idProduct}=="6860", MODE="0666" SYMLINK+="gtab"
LABEL="gtab_usb_end"
LABEL="gtab_rules_end"
64bit RULES FILE:
Code:
ACTION!="add", GOTO="gtab_rules_end"
SUBSYSTEM!="usb|usb_device", GOTO="gtab_usb_end"
ATTRS{idVendor}=="04e8", ATTRS{idProduct}=="6860", MODE="0777" SYMLINK+="gtab"
LABEL="gtab_usb_end"
LABEL="gtab_rules_end"
Tested, walked through the steps to my friend (Skype ). Works 100% on Linux Mint too
Everything worked for me up to the GMTP part - I can grep through /dev and I can see the "gtab" device there. But GMTP insists "Detect: No raw devices found."
I'm still running Maverick, but I added the maverick-backports repo, which has gmtp, so I would think it would work.
This is a Samsung Galaxy Tab 10.1v (from Google I/O). Any ideas?
EDIT: I also tried the automounting option with FUSE. Attempts to cd into it with bash or open it from the Places menu in GNOME both give the message "Transport endpoint is not connected".
EDIT again:
OK, I disabled USB Debugging and now have a different set of problems. mtp-detect sees the device now, but the message upon running it is:
Code:
libmtp version: 1.0.3
Listing raw device(s)
Device 0 (VID=04e8 and PID=6860) is UNKNOWN.
Please report this VID/PID and the device model to the libmtp development team
Found 1 device(s):
04e8:6860 @ bus 2, dev 26
Attempting to connect device(s)
ignoring usb_claim_interface = -16ignoring usb_claim_interface = -22PTP_ERROR_IO: Trying again after re-initializing USB interface
inep: usb_get_endpoint_status(): Device or resource busy
outep: usb_get_endpoint_status(): Device or resource busy
usb_clear_halt() on IN endpoint: Device or resource busy
usb_clear_halt() on OUT endpoint: Device or resource busy
usb_clear_halt() on INTERRUPT endpoint: Device or resource busy
LIBMTP PANIC: Could not open session! (Return code 767)
Try to reset the device.
Unable to open raw device 0
OK.
Konklone said:
Everything worked for me up to the GMTP part - I can grep through /dev and I can see the "gtab" device there. But GMTP insists "Detect: No raw devices found."
I'm still running Maverick, but I added the maverick-backports repo, which has gmtp, so I would think it would work.
This is a Samsung Galaxy Tab 10.1v (from Google I/O). Any ideas?
EDIT: I also tried the automounting option with FUSE. Attempts to cd into it with bash or open it from the Places menu in GNOME both give the message "Transport endpoint is not connected".
Click to expand...
Click to collapse
Can you post the output from 'lsusb' ?
re the "Transport endpoint is not connected" - I just got this same error on 64bit Natty. Will try and see if I can find out why..
Ah, just saw your reply. I edited my post up above, but the gist is - you can't do this while USB Debugging is enabled. The Tab has to be running its "MTP Application".
Now I'm getting the stranger errors above. I'm going to try mounting it with FUSE now to see if that helps for some reason.
EDIT: For the record, I'm using the correct vendor and product IDs in my rules file:
Code:
ATTRS{idVendor}=="04e8", ATTRS{idProduct}=="6860", MODE="0666" SYMLINK+="gtab"
Konklone said:
I edited my post up above, but the gist is - you can't do this while USB Debugging is enabled.
Click to expand...
Click to collapse
You may be right. When I wrote this guide, I was using a VM. It is possible that the fact that I was using both MTP and ADB at the same time has something to do with how VMWare presents the devices to the guest OS.
Now I am using 'bare metal' Natty 64 bit and have the same problem as you.
I have to go out for a while but will look at it again when I get back.
EDIT: Just tried mtp-detect and it is finding the device. I suspect USB Debug is not the issue, but I'll leave it in your capable hands - really got to go now
EDIT2: See here http://www.usb.org/developers/devclass_docs/MTP_1.0.zip OK - Im really REALLY going now. Back online in a few hours
I couldn't get anywhere until I turned off USB debugging. When USB debugging is enabled, I *can* use adb to get into the shell, see files, install apps, etc. I can even transfer files over adb, through the command line! Can you get MTP to detect it with USB debugging enabled?
With USB debugging off, I have once in a great while (only twice in all my attempts) while gotten mtp-detect to connect to the device and print sane output describing the device. Even when those happened, running the command immediately again didn't connect correctly, and gave me the same error messages I was getting before. Both times I got it to connect, it was soon after plugging in the cable, but it doesn't happen every time.
Intermittent heisenbugs are the worst, yet I don't think I have a busted cable, given that adb works perfectly consistently.
Maybe I should try this again after updating to Natty...I'd been meaning to do it anyhow...
EDIT: One thing I notice is that on the Tab, when the "MTP Application" is running after plugging in, the 5-dot "in progress" animation is extremely choppy, as if the device were very very busy. If the device were very very busy for some reason, this could explain why a successful connection can happen only once in a great while. I'll try rebooting the device, I guess.
EDIT2: I rebooted the device, and I removed the USB extension cord I was using, but neither helped, still getting the same intermittent success. (I got mtp-detect to connect to it a few more times - all soon after plugging in the cable, and none were repeatable without unplugging and replugging it in.) The animation actually wasn't choppy before, that's just how it looks - 5 discrete animation frames, one for each dot.
Something interesting though: this time I had the Tab resting on my knee, and I felt a haptic buzz after running mtp-detect on one occasion. I looked down and saw the MTP Application restart itself. Then I ran mtp-detect again and I felt 3 haptic buzzes in quick succession, followed by a successful detection and output. But when running mtp-detect *again*, no dice.
This is messed up.
Messed up indeed.
Konklone said:
Can you get MTP to detect it with USB debugging enabled?
Click to expand...
Click to collapse
Yes, both work simultaneously on 32bit Natty
Note that you have to unmount the gtab for mtp-detect to work. I compared the output from mtp-detect on the 32bit working VM and the 64bit non-working 'bare metal' machine and the output was identical. I suspect this means that mtpfs is not where the problem is
Re the strange problem with haptic feedback - I have had mine power off all by itself when testing some different parameters in the rules file.
[64bit working]
OK. Problem solved... kind of. There seems to be some kind of bug in fuse which requires the filesystem to mount with higher permissions to run properly (at least on Natty AMD64)
If you use the new 64bit rules file I have attached, it should work. Basically it uses 777 permissions instead of 666. Not great, but working nonetheless.
New rules file for 64bit:
Code:
ACTION!="add", GOTO="gtab_rules_end"
SUBSYSTEM!="usb|usb_device", GOTO="gtab_usb_end"
ATTRS{idVendor}=="04e8", ATTRS{idProduct}=="6860", MODE="0777" SYMLINK+="gtab"
LABEL="gtab_usb_end"
LABEL="gtab_rules_end"
EDIT: If someone wants to experiment with lesser permissions and see what the minimum is and post back, that would be helpful for all.
Sigh, thank you for taking so much time to help me so far, but I wonder if I'm a lost cause.
I spent a bunch of today finishing my upgrade to Natty, including a full wipe and reinstall. (I have a 32-bit machine, btw.) Now I can't even get it to detect my MTP device at all (mtp-detect says "No raw devices found."), with or without debugging enabled.
One possibly important topic - it's really surprising to me that yours works either way, because lsusb shows that a different product ID is exposed to the host, depending on whether debugging is on or not. With debugging disabled, it's 6860, like your example. With debugging enabled, it's 685e. When I run lsusb, only one of those will show up, never both. So if yours is the same device, I have no idea how your rules file could be agnostic to debugging being enabled. If yours is not, then that might explain our different experiences.
Anyway, I've Thanks'd all your posts in this thread, solved or not. I appreciate your help.
Konklone said:
With debugging enabled, it's 685e. When I run lsusb, only one of those will show up, never both
Click to expand...
Click to collapse
You're more than welcome.
I noticed that in Windows, both devices appear in device manager. That is a very strange problem you have discovered.
I just posted instructions and files to give you root access! Might take your mind off the MTP issues for a while
Who knows... the problem might just go away
Konklone said:
One possibly important topic - it's really surprising to me that yours works either way, because lsusb shows that a different product ID is exposed to the host, depending on whether debugging is on or not. With debugging disabled, it's 6860, like your example. With debugging enabled, it's 685e. help.
Click to expand...
Click to collapse
Are you sure? On my device its the other way around. Without debugging its 685e and with debugging its 6860?
ajvogel said:
Are you sure? On my device its the other way around. Without debugging its 685e and with debugging its 6860?
Click to expand...
Click to collapse
Ok I got it working on my device, I switched on usb debugging in settings. lsusb now returns 6860 and I am able to mount the galaxy tab using the process outlined above.
This is craziness. Is my Galaxy Tab a rare mutant piece of hardware who had its USB numbers switched?
Also - I noticed that Ubuntu somehow automounts my tablet and can read/write to its disk, through a Nautilus plugin. But I still get nothing with mtp-detect. I don't understand how the world works.
I've also got an I/O tablet (updated to 3.1) and I followed this tutorial, so thanks for the help you provided! I managed to copy some files to the device but it ended up freezing my computer (running Ubuntu 10.10).
So I unplugged the tablet, and saw that effectively those few pictures and pdf files had been copied to the device successfully. Pictures are in the Gallery, pdf can be read with Aldiko... but the funny thing is that when I mounted again the tablet -using Ubuntu again- it shows all folders as empty!
That is, 0 files in all tablet folders.
I tried "showing all hidden files" with Nautilus. No luck, nothing is shown. Went to the folder using command line, did an ls -la (just in case who knows! maybe it would show something!). No luck either, directories are apparently empty and have "1 January 1970" as modification date... if it helps.
I can see the files inside the folders using ADB but it's obviously not ideal, specially compared with simply using Nautilus.
Does it happen to you too?
Anyone get this working? I'm having the same exact issues as Konklone. I'm on Maverick and tried the different udev rules and it still doesn't work. I'm gonna be pissed if I have to buy the stupid Samsung USB adapter just to get USB mass storage.
[ASK]Noobs need solution
gMTP tells me that there is no device. Any ideas?
I'm having the same issue. First try I was able to plug in and mount to my netbook. Tried to plug into my mac and it didn't work. Hasn't worked since then, i'm considering doing a factory reset.
I'm running Ubuntu 10.10 64-bit. Note that you do have to enable backports to install gmtp.
Edit /etc/apt/sources.list, uncomment the lines with:
Code:
deb (http-url) maverick-backports main restricted universe multiverse
deb-src (http-url) maverick-backports main restricted universe multiverse
Run
Code:
sudo apt-get update && sudo apt-get install gmtp
I had to unplug the device and replug it back in a couple of times before gmtp would connect to it properly. It seems to be pretty flaky.
Wow...........
This is nonsense ..... is there a way to enable USB Mass Storage or are we completely hosed with MTP?
Hi.
I have a little problem, WindowsPhone emulator not started from VisualStudio.
When i start debuging the emulator displays with the message 'Windows Phone is Starting'. Times out after about 5 minutes with the following error messages:
Error: DEP6100: The following unexpected error occurred during bootstrapping stage 'Connection to the device':
Error: DEP6200: Bootstrapping Emulator 8.1 WVGA 4 inch(RU)' failed. Device cannot be found. App deployment failed. Please try again.
If run from Hyper-V Manager, it's works fine.
I tried:
- Reinstalled Visual Studio (after removal i cleaning system by CCleaner)
- Reinstalled Hiper-V
- Download and install the Windows Update, VS updates
- Removes all virtual machines in the Hiper-V, and network interfaces
- Turn off the firewall, no antivirals, Windows Defender is turned off (but i haven't viruses)
- Turned off all network interfaces except the Windows Phone Emulator Internal Switch (VS creates when starting the emulator)
- With routes 169.254.xx all right
Help please...
Sorry for my bad english.
eljira said:
Hi.
I have a little problem, WindowsPhone emulator not started from VisualStudio.
When i start debuging the emulator displays with the message 'Windows Phone is Starting'. Times out after about 5 minutes with the following error messages:
Error: DEP6100: The following unexpected error occurred during bootstrapping stage 'Connection to the device':
Error: DEP6200: Bootstrapping Emulator 8.1 WVGA 4 inch(RU)' failed. Device cannot be found. App deployment failed. Please try again.
If run from Hyper-V Manager, it's works fine.
I tried:
- Reinstalled Visual Studio (after removal i cleaning system by CCleaner)
- Reinstalled Hiper-V
- Download and install the Windows Update, VS updates
- Removes all virtual machines in the Hiper-V, and network interfaces
- Turn off the firewall, no antivirals, Windows Defender is turned off (but i haven't viruses)
- Turned off all network interfaces except the Windows Phone Emulator Internal Switch (VS creates when starting the emulator)
- With routes 169.254.xx all right
Help please...
Sorry for my bad english.
Click to expand...
Click to collapse
Make sure you don't have too many NICs, tunneling adapters, or TAPs for OpenVPN installed. My only remedy was to reinstall the whole OS. Hopefully you can find something out.
My temporary solution:
Start XDE manually -
PHP:
XDE.exe /name "Emulator 8.1 WVGA 4 inch(RU).admin"
where param /name is a name of virtual machine in Hiper-V and name emulator in VisualStudio, after it VisualStudio can connect to started emulator.
Former-Prime R1 HD 16GB
Windows v8.1
TL;DR:
I am unable to get my phone to be recognized in fastboot by the fastboot utility, yet it is recognized by adb. I've tried a couple of different sources for drivers, both signed and unsigned. Each time I've installed drivers I've gone into Device Manager and removed previous disconnected device instances along with the drivers (checked remove driver box). Besides the fact that adb sees the phone fine with the cable I'm using, it's the same cable I have successfully used with my Samsung and Nexus devices. I'm at my wit's end. :crying: I could really use some help.
Full version:
I've followed the instructions from this thread to flash my phone into an OEM non-Prime device:
https://forum.xda-developers.com/r1-hd/how-to/guide-convert-to-prime-rollback-ota-t3432499
It's now running V12. I want to verify the state of the bootloader and jump through the hoops to safely put V17 on it (without whacking the preloader, etc.). My problem is that when I try fastboot devices no devices are listed. However, adb devices shows the phone.
I installed ADB and fastboot v1.4.3 using the package from this thread:
https://forum.xda-developers.com/showthread.php?t=2588979
I've tried a couple of different sources for drivers, both signed and unsigned. Each time I've installed drivers I've gone into Device Manager and removed previous disconnected device instances along with the drivers (checked remove driver box). I've got tzul's signed drivers installed which were obtained from this post using the enclosed instructions (both those in the "Android" and "CDC" folders):
https://forum.xda-developers.com/showpost.php?p=67927242&postcount=23
I also have the Android SDK's Platform Tools and Google USB driver installed and tried the adb and fastboot from there with the same results.
When booted to the Android OS, the phone shows up as Android Composite ADB Interface in Device Manager. When I use adb to try and reboot the phone into fastboot via adb reboot fastboot it merely reboots into the OS. To get into fastboot mode I have to do it via the bootloader (power+vol. up). When attatched in fastboot mode the phone shows up in device manager under "Other devices" as "Android" with The Yellow Triangle of Doom, and says drivers for the device aren't installed (Code 28). From what I've read, the drivers it's looking for are the in the "Android" folder of the drivers .zip I downloaded, which I have installed per the instructions.
Can someone please help me figure out what I've done incorrectly?
Fixed
As I had surmised, it was a driver issue. One of the driver bundles I had downloaded from androidmtk.com or another site foobar'd me. But before I had this straightened out, I gave up and used a Linux Mint virtual machine to verify my bootloader status, etc.
The way my drivers got straightened out was that I coincidentally ran Windows Update as I had updates available for which enough time had passed without reports of problems. Update offered me the following updates:
Important
Windows 8.1 Drivers
Microsoft - Other hardware - MTP Device
TP-LINK - Other hardware - Android Bootloader Interface
Windows 8.1 and later drivers
Samsung - Other hardware - Samsung Mobile MTP Device
Optional
Windows 8.1 Drivers
MediaTek - Other hardware - Android Composite ADB Interface
After installing these I again tried to use fastboot from my Windows box and it worked fine. So, one of the driver packs I installed screwed up my MTP drivers evidently (both the updates offered were from early last year). The TP-LINK driver was the VCOM I needed for fastboot to work.
So, all's well that ends swell.
Amazon Prime running on V.6.1
Windows 7 x64
I am having similar issues but I don't fully understand how the OP solved this problem. I believe I am connecting properly with ADB but no response from fastboot. Here is what I have done so far:
1) Installed the "15 Sec ADB Tool". Drivers seem to be working but could not located the ADB folder the tool was supposed to create. I suspect drivers were installed correctly because under Device Manager I have "Android Phone > Android Composite ADB Interface"
2) Directly downloaded latest SDK Platform Tools, which includes adb.exe & fastboot.exe, among other files. Tried testing the tools with the following results:
C:\Users\Phantom\Dropbox\Personal\IT\Android\SDK Platform Tools\platform-tools>adb devices
List of devices attached
* daemon not running. starting it now at tcp:5037 *
* daemon started successfully *
5DFYRKKFQWBEQ4LJ unauthorized
C:\Users\Phantom\Dropbox\Personal\IT\Android\SDK Platform Tools\platform-tools>fastboot devices
C:\Users\Phantom\Dropbox\Personal\IT\Android\SDK Platform Tools\platform-tools>
Phone is turned on while doing the commands above. Could someone shed some light? Is the ADB response adequate? And should I get a fastboot response as well? If so, what could be the problem?
Lastly, phone has UBS Debug mode enabled.
Thanks in advance!
OldSkewler said:
Amazon Prime running on V.6.1
Windows 7 x64
I am having similar issues but I don't fully understand how the OP solved this problem. I believe I am connecting properly with ADB but no response from fastboot. Here is what I have done so far:
1) Installed the "15 Sec ADB Tool". Drivers seem to be working but could not located the ADB folder the tool was supposed to create. I suspect drivers were installed correctly because under Device Manager I have "Android Phone > Android Composite ADB Interface"
2) Directly downloaded latest SDK Platform Tools, which includes adb.exe & fastboot.exe, among other files. Tried testing the tools with the following results:
C:\Users\Phantom\Dropbox\Personal\IT\Android\SDK Platform Tools\platform-tools>adb devices
List of devices attached
* daemon not running. starting it now at tcp:5037 *
* daemon started successfully *
5DFYRKKFQWBEQ4LJ unauthorized
Click to expand...
Click to collapse
This shows adb is on , on your phone but you did not allow the connection. =. When you first connect pc to phone with usb cable and adb enabled , you should get a pop up window on the phone. You may need to wake the screen and unlock to see it. The window asks you to authorize the connection
OldSkewler said:
C:\Users\Phantom\Dropbox\Personal\IT\Android\SDK Platform Tools\platform-tools>fastboot devices
Click to expand...
Click to collapse
You also missed a step here. You needed to reboot phone to bootloader /fastboot mode before asking to list fastboot devices.
So before that line you should have done "adb reboot bootloader"
OldSkewler said:
C:\Users\Phantom\Dropbox\Personal\IT\Android\SDK Platform Tools\platform-tools>
Phone is turned on while doing the commands above. Could someone shed some light? Is the ADB response adequate? And should I get a fastboot response as well? If so, what could be the problem?
Lastly, phone has UBS Debug mode enabled.
Thanks in advance!
Click to expand...
Click to collapse
mrmazak, you are absolutely right on both items. I wish I had come across something explaining this earlier... spent a lot of time sorting this out!
Hopefully this will help someone in the future!
I noticed a certain feature of a ROM, so I conducted a test on other ROM.
If you execute the command you see on the screen something like this,
Code:
[FONT="Courier New"]P:\>adb devices
List of devices attached
XXXXXXXXXXXXXXXX unauthorized
P:\>adb shell
error: device unauthorized. Please check the confirmation dialog on your device.[/FONT]
you might like to know that ROMs have a similar property.
Code:
[FONT="Fixedsys"]aokp_mako_nougat_nightly_2017-03-15_ota.zip - NOF27B
aoscp_mako-3.6-20170225-official.zip - NMF26X
CARBON-CR-5.1-MOO-WEEKLY-mako-20170107-1159.zip - NMF26V
Cosmic-OS_mako_7.1.1_20170212_1.3-OFFICIAL.zip - NMF26V
crDroidAndroid-7.1.1-20170307-mako-v2.3.zip - NOF26W
lineage-14.1-20170309-nightly-mako-signed.zip - NOF27B
lineage-14.1-20170312-NIGHTLY-MLQ-mako.zip - NOF27B
MK71.1-mako-201703121057-NIGHTLY.zip - NOF27B
omni-7.1.1-20170228-mako-HOMEMADE.zip - N4F26O
RR-N-v5.8.2-20170227-mako-Unofficial.zip - NOF26W[/FONT]
___________________________________________________________________
Below I present a ROM that behave differently, but for me it's good.
Code:
[FONT="Courier New"]P:\>adb devices
List of devices attached
XXXXXXXXXXXXXXXX device
P:\>adb shell
mako:/ #[/FONT]
Code:
[FONT="Fixedsys"]aicp_mako_n-12.1-NIGHTLY-20170312.zip - NOF27B
aosp_mako-ota-eng_V10.zip - NMF26Q
DU_mako_7.1.1_20170310-1645.v11.2-UNOFFICIAL.zip - N6F26U
liquid_mako-20170226-1613-nougat.zip - NOF26W
NeXus4ever_mako-7.1-r02-20161227.zip - NMF26Q
Nitrogen-OS-mako-20170307.zip - N6F26U
purenexus_mako-7.1.1-20170217-HOMEMADE.zip - NOF26W
saosp_mako-ota-3-8-17.zip - N6F26U
Slim-mako-7.1.1.build.0.14-BETA-20170303-0414.zip - NOF26W
ua_mako-7.1.1-20170201.zip - N6F26Q
XenonHD-170215-Official-mako.zip - NMF26V[/FONT]
___________________________________________________________________
I made a test in Windows 8.1 64-bit, USB cable was still connected.
Only a clean installation and activation of debug USB, if it was not set by default in the ROM.
All you have to do is accept the authorization prompt on your phone, and then the "unauthorized" will appear as "device."
TheSt33v said:
All you have to do is accept the authorization prompt on your phone, and then the "unauthorized" will appear as "device."
Click to expand...
Click to collapse
I am glad that there is someone with a Windows 8.1 64-bit! :highfive:
So I would recommend your mind what has been written on this page 3.
---- edit ----
It seems that this feature has long existed.
Can't connect Nexus 4 to adb: unauthorized.
---- edit 2 - solved ----
I still do not know why one ROM works differently from another.
I have found a solution that points to the cause on the windows side that produces this effect.
Cant connect to Android phone using adb (adb device unauthorized)
I had something like this:
Code:
[HKEY_CURRENT_USER\Environment]
"ANDROID_SDK_HOME"="C:\Android"
but there was no c:\android directory on my hard drive.
After removing the environment variable and restarting the system, there is no longer "unauthorized" on some ROMs.