Hi all ,
I've a little problem but I don't understand if it's hardware or software:
Few days ago, I bought a HTC ATT Tilt 8925 from an Italian user (here in Italy but he has bought it in USA) that gave it to me with a Vega R2 ROM (WM6.1)installed and a little problem, the SIM try to connect than it says "SIM Missing" and after few times (opening the slide panel and going offline online the phone SIM connect right. To improve the quality of signal and appareance of OS I flashed the Radio with 1.71.09.01.eMo and flashed the OS with th custom ROM named shifu v.4.3 ITA (WM6.5).
Here is the trouble, the phone now always say "SIM Missing" and only WIFI and BT go right and no signal from 3G or GSM antenna.
I try to put a little paper inside the SIM dock but the situation never change.
Can this be a HW or SW problem?
Thank you all in advance.
One little thing, to have a custom ROM installed the before user has used a SSPL 1.0 by olinex and HardSPL 3.29 (cmonex) as I saw flashing by the bootloader (trying to flash KAISDIAG and KAISIMG from HardSPL 3.29 for SD by cmonex).
I hope he made SIM and CID unlocking (can be this last thing that before user hadn't done???)
Moved as not ROM Development, the noobs guide to flashing contains info needed to flash H-SPL and also sim unlock.
Wasn't 100% sure on your question as if not sim unlocked then you can't use a different sim than original carrier.
I've just made all the procedure from the first step to the last.
Even if the KaiserUnlocker Check said me that my phone was already SIM unlocked I remade all and the problem it's the same.
The SIMs that I have try are CoopVoce and MTVMobile (Virtual operator both served by TIM, the main operator here in Italy).
Related
Hi all,
Being new to this and knowing what could happen to your phone, I want to know if you can check if LokiWiz has worked.
Yesterday I tried if the sim lock was gone and it has, but what about the CID?
Please let me know if it is possible to check.
Device specifics:
Qtek 9100, via Vodafone NL.
ROM1.3.7.10 NLD
ROM Date: 9/29/05
Radioversion: 01.04.10
Protcolversion: 4.0.13.17
ExtRom version: 1.3.7.8012
Thanks,
Bas
Did you use LokiWiz for only unlocking your SIM or also for CID?
SIM and CID unlock are both different options in LokiWiz.
You can check if SIM unlock has worked by changing SIM card and
you can check if CID unlock has worked by upgrading your device to the latest ROM (that's the only reason why anyone would CID unlock their device ).
Good Luck.
I did both.
I did a SIM unlock, and the test worked out fine. I swapped cards with a collegue who has a T-mobile card. Worked.
I did also a CID unlock. But I don't know if that worked. Is there a way to test. Or can I go and duo the upgrade. Does that one check if the CID is gone?
Thanks in advance for the answer.
Bas
Errm ive neva done an upgrade but if your CID is not unlocked i would assume the phone would turn into a brick....but remember thats an assumption :!:
Guys,
I just did the jump at the deep end and ....... kept swimming. :lol:
The upgrade went well. At the moment I'm reinstalling all my software.
Thanks for the answers.
Bas
after install AUTO_Unlock_v1.bat and faman 3.3 , now i put into de device 3600 the movistar sim device . now the htc device says : write the number code because sim is locked.
i only has pin sim.
how can i get it??
That AUTO_unlock is the one by Pof?
http://pof.eslack.org/trinity-unlocker/
That´s the one i use for my p3600 and it works with T-mobile USA and Movistar Spain,since I unlocked it I had never any kind of messages or anything like that.
Try out once again or if you are using wm6 downgrade to wm5 and try to run Pof´s tool again and If you get to unlock it go back to wm6,maybe you already did,let me know
Roaming
I just asked orange to allow roaming on my handset.
Hi,
I just bought a T-Mobile Wing and wanted to unlock it for international usage and loading WM 6.1 (custom cooked ROMS). I hope the procedure would be same as I did with my previous WIZARD.
Can someone help me here in this regard?
Thanks.
singhravi437 said:
Hi,
I just bought a T-Mobile Wing and wanted to unlock it for international usage and loading WM 6.1 (custom cooked ROMS). I hope the procedure would be same as I did with my previous WIZARD.
Can someone help me here in this regard?
Thanks.
Click to expand...
Click to collapse
One Thread hat done it as well, for the rest you hat only to use the first Thread in Herad or Herald Mobil 6.
See here:
http://forum.xda-developers.com/showthread.php?t=369397
http://forum.xda-developers.com/showthread.php?t=327046
contact jockyw2001 for SIM unlocking
"SIM Locked" Network Locked - Enter unlock code
Even after doing the Hard SPL the device is asking for unlock code if I insert a foreigh sim card.
I tried doing the USPL also. Same results.
After Hard SPL I also tried to install Touch_IT_wm6.1_Full_-Herald_P4350.zip ROM. It installed well but show same SIM locked error.
Please let me know the steps to start fresh and unlock the phone for international usage. I also wanted to load custom rOM but as SIM not supporting so not able to proceed further.
Apreciate any help in this regard.
Device: T Mob Wing (HERA110)
I answered your question in the other thread.
Please don't double or cross post
Hi folks
general Problem: Have problem to get network after (sim)unlock my phone.
my situation:
I got a mda Vario III (aka Kaiser) from T-mobile Austria.
I put hardspl on it (KAIS130 SPL-3.56.Hard CPLD-8) and also unlocked it long time ago (maybe about one year ago)
In the meantime i flashed it several times (6.1 roms, 6.5 roms english german,...)
Now i changed my provider from T-mobile Austria to Hutchison 3G Austria
So i thought it should work because i unlocked my device as mentioned above
But the problem apeard that i got no network connection, the sim work fine, i can find all providers but it will not connect (also tried sim in other phone worked fine -> sim is OK)
So I used KaiserUnlocker again to unlock my phone everything worked fine also changed CID to 00000000 but same problem.
When i read the unlockstatus with the unlocker tool it says that my phone ist unlocked.
Currently i also try different radios but always the same problem.
rom: 3.28.407.0 GER (original HTC ROM)
radio: 1.65.16.25 (and tried others)
So now i am on the end with my wits anybody an idea?
nice greetings
stp
Let me start with the fact that this is the first phone I have pndered flashing.
I have a Verizon branded TP2 that I am now using on Rogers (GSM) here in Canada. Everything is working. Currently running 6.5 flashed from the Verizon website before I inserted the Rogers SIM and re worked the internet settings.
I am confused as to which Hard-SPL I should use to prep for a new ROM. I would eventually like to get the phone to the point where the Verizon crap is gone but I can set the phone to work fully on Rogers. The phone shipped with a Verizon Vodaphone GSM card inside so I am assuming it was GSM in the states but it has CDMA settings.
So my questions are:
1. Which Hard-SPL do I use... the GSM or the CDMA/Worldphone?
2. Any recomendations on ROM would be welcome, I don't want anything radical and I like the current interface but want to de-brand the phone and make sure I am not loosing out on features.
Your device may be using GSM, but it is a CDMA Worldphone. You need to use the HardSPL made for the RHOD400 and RHOD500, found in the CDMA Rhodium subforum. Though it's impossible to flash the wrong HardSPL, as the program will simply exit with a warning message if the device is the wrong model.
If you want more ROMs, check out PPCGeeks, they do more stuff with CDMA devices
CDMA phones dont use a SIM, the Vodafone card that it came with is there for roaming only, but it would seem you can use it for calls
the verizon number is stored in it when you activate it.