Hi Folks,
hope somebody can help me. I`ve got a problem with listening to webradio:
WunderRadio and MiastoMuzyki anly work when the phone is connected to my PC in Sync Mode. WunderRadio can`t establish a connection and Miasto just doesn`t play.
It doesn`t help to connect a headset or a charging device, only an active ActiveSync connection does it. Browser and Youtube-App just work fine.
Someone got an idea what`s wrong here ?
Greetings, Tobias
Okay, just tried SPB Radio, same issue....
Something interesting: When I disconnect the network connection of my PC, all programs stop playing almost immediately. That means they don`t use the 3D connection i.e., but the computer`s internet connection ? Why that ???
Related
Hello guys,
I was wondering if you could help an extreme newbie.
I just got my tilt a couple of days ago, and with the help of a friend i have installed Dutty's touchflow rom. My problem is the following:
I have a Sony Vaio laptop that connects to the internet wirelessly through my wireless router. My tilt also connects to the internet through the router. However if i connect the tilt to the vaio for an activesync or to charge, the wireless connection on the laptop crashes. It crashes even if the wifi on the tilt is turned off. It can only be restored if i disconnect the phone AND restart the computer.
Did anybody face a similar problem?
Any help would be appreciated.
Thanks.
It's an activesync issue.
When not connected to the PPC , Right click on AS icon in the PC.
Select Connections.
on the bottom you will see.
"Allow wireless connection......"
Mark the check box and your good to go
Nadavi
Hey buddy,
Thanks very much for responding. Tried it but unfortunately no joy. Its like my laptop loses the ability to connect to the router. I can see the connection but it just stays there, tries to get an ip, gets one and then crashes again...
Any other ideas?
what nadavi said, helps when you have problems connectin at your phone not your laptop.
perhaps your problem hs to do woth your network-configuration. AS gives a bridged network-interface trough to your mobile phone, connected via AS.
eventually your real-network-interace-driver or something else has problems with thi network-bridging ... did you tried to install AS 4.2 instead of 4.5 or otherwise?
aalexandrou said:
Hello guys,
I was wondering if you could help an extreme newbie.
I just got my tilt a couple of days ago, and with the help of a friend i have installed Dutty's touchflow rom. My problem is the following:
I have a Sony Vaio laptop that connects to the internet wirelessly through my wireless router. My tilt also connects to the internet through the router. However if i connect the tilt to the vaio for an activesync or to charge, the wireless connection on the laptop crashes. It crashes even if the wifi on the tilt is turned off. It can only be restored if i disconnect the phone AND restart the computer.
Did anybody face a similar problem?
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
I bet you have a Intel 2195 or 2200BG wireless adapter in the notebook? There is a problem with some of the drivers for the adapter and Activesync that makes you wireless network disconnect when you plug your phone in for sync. I had the same problem on my former laptop, it went a way with a driver downgrade!!! if I remember correct
Another way of solving it was installing Trend Micro PC-illin 2007 Internet security. It installs some sort of driver that made it work, it sound crazy I know but it worked with that - I and more people that I know got it working that way but I dont´t like Trend Micros software
Hey easycure,
Thanks for this response. I took your advice and went the opposite direction. I do have a 2200BG adapter, but rather than downgrade, i upgraded the driver.
Worked like a charm. Thanks!!
@edi - thanks for your reccomendation too. In the end i did not need to go that way, but thanks all the same.
aalexandrou said:
Hey easycure,
Thanks for this response. I took your advice and went the opposite direction. I do have a 2200BG adapter, but rather than downgrade, i upgraded the driver.
Worked like a charm. Thanks!!
@edi - thanks for your reccomendation too. In the end i did not need to go that way, but thanks all the same.
Click to expand...
Click to collapse
Yeah it might have been a driver update I did, it was two years ago I had that laptop so I cant remember exactly But I am happy that it fixed it for you - I do remember how frustrating it was
I am having the very same issue. When I connect my Kaiser via activesync the wireless status information immediately appears on my laptop. The internet connection then stops working or only occasionally works. Took me an age to find a related thread! I'm about to update the drivers for the 2200BG adapter so I hope it works!
Cheers
Hi
My connection to internet through my diamond (internet connection over USB or bluetooth) is very unstable. The program show that it is connected and my computer gets an ip-adress from the phone, but I don't reach the internet (my phone answers to ping(default gateway))
The connection profile I'm using works (i use it to sync with Exchange) and one out of 10 times it works with my computer too
Anyone have similar problems?
Best regards
Andreassg
i have the same problem!
hey - i have the same problem - im trying on my mac (10.5.5), the computer connects to the phone fine and gets an IP address, but no data gets through to the net - strange though it works find using dialup bluetooth, just not using the internet sharing app and bluetooth lan connection. It has to be a windows mobile issue. Strange thing is though - and this is where things go strange, it works fine with the widcomm BT stack on an XP machine.
just my thoughts
D
Hi All
After looking at this amazing application - http://forum.xda-developers.com/showthread.php?t=427097 - I decided to install it, works great if im using the USB wire. But my problem is that Vista wont find my Diamond to connect it to a PAN, ive followed the information on that guide.
Ive tweaked my registry, ive also ran WM6BTPAN which doesnt seem to do much.
Ive also checked my MSI Btoes drivers on my pc. Im running Vista 32bit Business and its find actually pairing with my Diamond, but when it comes to actually setting up the pan, I just get that screen (image attached).
Anyone else having this problem?? or even better anyone else know how to fix this?
Thanks
I got the same problem with xp, too.
I have an Belkin USB adapter and I even started the bluetooth network from the pc with the Belkin software... and in "network connections", the icon looks like it has a connection, but the computer isn't receiving any packages (just sending packages).
So what do I have to do so my Vario IV will connect?
...
I just found out that there is no connection between my Vario Iv and my PC:
I turned my bluetooth on my phone off and let the PC connect with the bluetooth network and it says it's connected.
So, if anyone has an anwser to this problem, please help us.
Thx
Hello, I have a problem when I try sharing my PDA's HSDPA to my Computer over Bluetooth.
I often use the Internet Sharing Option on my Diamond to get Internet on my Laptop.
Yesterday I tried the first time to share the Connection over Bluetooth (usually I use the USB)
But it doesn't work!
I open a Bluetooth PAN on my Diamond, then I connect my PC to the PAN.
Everything seams working well! My PC shows me that he is connected to the Diamond's Network Access, Signal Strength: Good, Packets are comming trough...
Now I try to open the Internet (IE 6), but he cannot reach any page! Only sometime he opens a bit of a site... But most times he tells me that there is nothing avaiable...
When I connect my Diamond then on a USB cable and I try it... it works fine...
What am I doing wrong???
P.S.: There is no Firewall, neigther an Anti-Virus
bump or whatever ? help ???
i'd also like to get the info on how to set up a pan on the diamond so i can use it with my oqo 0+
It seams like nobody has any help or anser for this? Is there anybody who shares the same problem?
you are not alone!
tho i'm far from being of any help as i have less of an idea than you!!
Diamond PAN
I have the same problem connecting using BT but it works perfectly using USB
Yep, a friend of mine has the same problems... do you think there could be a bug?
If it is in...
...Active Sync, I will try an older version just for tests
... the Diamond itself?? Don't know
... Windows, i did all Updates, nothing changed
.. Bluetooth Driver, try to update this one.
That are the things where the problem could be... Or are there any other ideas?
sharing internet?
hai,
using the internet from my HTC diamond via bleutooth pan was a breeze, just created a connection with my laptop, after that run "shared internet" and than "connecting" the phone to the internet i then connect using my laptap with bleutooth PAN network, and it always works, no problems...
odd i do all that but the pc can't connect to my diamond ! wonder if orange uk have disabled it somehow ?
quote:- after that run "shared internet"
aha this is my problem i dont have the shared internet program in my orange uk rom!
cab anyone please????
found one!
link http://forum.xda-developers.com/showthread.php?t=420433
funny how searching the forum did'nt find this???!!!
just strting my little oqo .......................
connection ...........made............opening opera..................YES WORKS!!!!!!
WWWOOOOOOHHHOOOOOOOO!!!!!! (in a very english way of course ahem!)
Need to install the original Rom I think...
But normaly it has to be there... I don't think that Orange would disable that...
But I have another problem, everything is connected, status are all ok, but I cannot open any Site, but over usb cable it works fine...
Hi to all,
i've been facing quite annoying problem since i bought my topaz. BT connection to AS works ok, but when i want to connect my phone to pc via BT without launching AS, it says there was a problem connecting to device and it does not connect. Using Bluesoleil software on xp sp3.
In BT -> partnership settings wireless stereo, hands free and activesync is available. Any help?