ADB "bus error" - G1 Q&A, Help & Troubleshooting

When I type in any adb commands on my computer, I'm suddenly getting a "bus error". It works fine on my PC at home but not on my work computer. Could I have possibly deleted a file that is needed for adb? Does anyone have a way to fix this?

I'm on a MAC and have the same exact problem. I've tried ADB on two home computers with no luck. Although, my problem is on a MAC I'm hoping someone can provide some help to better direct my search for an answer

srkmagnus said:
I'm on a MAC and have the same exact problem. I've tried ADB on two home computers with no luck. Although, my problem is on a MAC I'm hoping someone can provide some help to better direct my search for an answer
Click to expand...
Click to collapse
My problem is on a Mac as well. It worked fine on this Mac until just the other day. When I get on a PC things still work fine.

Nobody has an idea?

I pulled the crash report and can't make much of it. A friend of mine suggested I backup the computer then re-install the OS to see if that fixes it, considering the error never existed until recently. I'm at a lost and have been very frustarted. It occurs on two computers (Macbook and an iMac) and differenct User accounts.

Staunty, My problem has been resolved. I am on Mac 10.4 (Tiger) and the newest SDK packages don't support it. If you are on Tiger and downloaded the most recent SDK then I'd suggest downloading an archived one from here:
http://developer.android.com/sdk/older_releases.html

Sorry if I post in this old topic but i have a problem!
Im on tiger and i have downloaded the sdk 1.6r1 in your link to avoid the bus error problem, but i discovered that in this version there isn't the command "adb connect" to use adb wireless!
I've done some search but i haven't found a more recent version for tiger... can you help me?

Which app did you try? Give this one a try and be sure to enter the command with the given IP.
ADB Wireless (Widget)

The problem isn't the app but the sdk version! In 1.6 there isn't the command "adb connect" so i can't connect the phone with my mac.
In the version that i had used before update to the last relase (that doesn't support tiger), this command was present, but i can't found it!
Sent from my HTC Magic using XDA App

Did you try older SDK releases other than the 1.6r1?
http://developer.android.com/sdk/older_releases.html
there are several older version further down the page.

I will try...
Sent from my HTC Magic using XDA App

Related

[HELP]cmd adb error msg...

I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problems. I've downloaded the sdk and ran the sdk setup.exe and downloaded all the latest files, and of course the usb driver. I was able to successfully install the driver and was able to connect my G1 for file transfer. I've followed the guide info to the letter but for some strange reason I get the following:
Code:
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
I've already tried uninstalling the newest driver and installing the working one from my pc, then I tried downloading a driver that was listed by a user in this thread. Still no luck. Any advice would be greatly appreciated!
SG_Shadow said:
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problems. I've downloaded the sdk and ran the sdk setup.exe and downloaded all the latest files, and of course the usb driver. I was able to successfully install the driver and was able to connect my G1 for file transfer. I've followed the guide info to the letter but for some strange reason I get the following:
Code:
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
I've already tried uninstalling the newest driver and installing the working one from my pc, then I tried downloading a driver that was listed by a user in this thread. Still no luck. Any advice would be greatly appreciated!
Click to expand...
Click to collapse
plug your phone in
get working drivers
install linux, it works better
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problem
Click to expand...
Click to collapse
[*]plug your phone in
[*]get working drivers
[*]install linux, it works better
Click to expand...
Click to collapse
u forgot a step.
[*]post in the correct forum
Firerat said:
plug your phone in
get working drivers
install linux, it works better
Click to expand...
Click to collapse
1) Done [Don't insult me!]
2) Tried 3 different drivers. All allowed me to connect my G1 to transfer files, but not ADB.
3) ...shouldn't have to install linux. My pc (running windows abviously) works just fine. My laptop, running windows, should work the same.
Thanks for the assistance though...
Daneshm90 said:
u forgot a step.
[*]post in the correct forum
Click to expand...
Click to collapse
Fail!
SG_Shadow said:
1) Done [Don't insult me!]
2) Tried 3 different drivers. All allowed me to connect my G1 to transfer files, but not ADB.
3) ...shouldn't have to install linux. My pc (running windows abviously) works just fine. My laptop, running windows, should work the same.
Thanks for the assistance though...
Fail!
Click to expand...
Click to collapse
read the adb for dummies thread, post in that thread...........................
and
your welcome.
would you like me to wipe your nose as well?
This IS in the wrong forum.
Moved.
Firerat said:
read the adb for dummies thread, post in that thread...........................
and
your welcome.
would you like me to wipe your nose as well?
Click to expand...
Click to collapse
I really wouldn't except this behavior from you, but I see we all fall from grace every now and again. I've posted in that thread already, no one can seem to come up with an intelligent response. I followed all the instructions in both adb help threads for proper installation on my laptop. If you don't know the answer to what I'm seeking, I would honestly prefer you not to reply at all. Don't assume I'm the typical xda idiot, assume I'm the most intelligent person you've ever spoke to, then go from there with your next reply.
SG_Shadow said:
I really wouldn't except this behavior from you, but I see we all fall from grace every now and again. I've posted in that thread already, no one can seem to come up with an intelligent response. I followed all the instructions in both adb help threads for proper installation on my laptop. If you don't know the answer to what I'm seeking, I would honestly prefer you not to reply at all. Don't assume I'm the typical xda idiot, assume I'm the most intelligent person you've ever spoke to, then go from there with your next reply.
Click to expand...
Click to collapse
you posted a couple of hours ago, duplicating posts might be considered spam
you didn't really give any useful information in your post(s)
and if I were to assume your were, then this is just some boring role play thing at a job interview or something, as you wouldn't really need anyones help on this.
Everyone, Chill it.
We don't need a flame war.
Check your firewall. Make sure it's not blocking the connection. Also, are you using the same USB cord on both machines?
ivanmmj said:
Everyone, Chill it.
We don't need a flame war.
Check your firewall. Make sure it's not blocking the connection. Also, are you using the same USB cord on both machines?
Click to expand...
Click to collapse
Thank you for trying to "actually" assist me. I am using the exact same usb cable on purpose to rule that out as a reason. I've also recently update both computers to the latest norton antivirus. Like I stated the drivers install on the laptop and I'm able to connect the G1 for file transfers, so I assume the driver is working but when I type in adb device or adb shell in cmd, I get the no device msg. I'm really stumped with this one...
*Update* My norton did remove adb.exe from windows\system32 on both computers, but I was able to restore that file on both. Like I said, my pc works just fine, laptop no good...
And point 3
Install linux ( ubuntu 10.4 )
Just give it 10gb
It will eliminate hardware faults as being the problem
The android developer has a tutorial for 10.4, so it should be easy
( no need for drivers, aparently 10.4 ships with the android udev rule )
the driver for file transfer isnt the same as the driver for adb....so your logic is flawed
seriously tho, use linux...wubi is pretty good now and u only need 4-10gb if u are only using it for android stuff
in my experience, windows, especially where norton is used, randomly breaks adb
The file transfer is done using the standard windows mass storage driver, not an android specific driver. Even if it's the same norton, try disabling it and see what happens. Also, trying removing the driver completely and reinstalling it again. I've had the issue happen also only when in windows and it's always something random.
virtualbox _should_ ( I think ) let you 'see' the Android Phone regardless of the drivers being installed on the Windows host
But, I have not tested that
Did you ever get this to work, I have the same issue?
I'm having the same issue, I'm trying to use ADB with my TF300T from a Windows 7 64 bit system. Always get the error adb error.
I have a couple of questions will this work correctly with a 64bit O.S?
Also the part of the instructions that reference SDCARD are they talking about the directory on my ASUS /sdcard/ or are they talking about the physical card?
Just need to know does it require you to have a sdcard in the ASUS to use adb?
May sound like fundamental questions to a lot of you, however I have combed through these forums as well as others all over the web, and the majority of instructions seem to be lacking the basics.
Thank you,
I have Ubuntu at work should I run ADB through this?
I have Ubuntu at work
It's a bit of a process according to the instructions that I have on the
screen right now to setup ADB through this, is there any gotchas that I should
know about before attempting this?
This is running on a VM on one of my servers. What I'm looking for is any known compatibility issues with versions of ADB and the Asus TF300T running .26
Thanks in advance.
Nordis

How do I transfer apps from my pc to my rooted nook touch?

Hello everybody! I have a lot of android apps on my pc and I want to transfer them to my nook, but I don't know if it is possible. If it is, which folder do I drop them off in? I tried to find where the other apps are installed in my nook that I directly download from the android market, but I can't find their location. Please help me out, I really need some of the apps I have and I can't even find them or can't download them directly. Thank you for your time!
psbear532 said:
Hello everybody! I have a lot of android apps on my pc and I want to transfer them to my nook, but I don't know if it is possible. If it is, which folder do I drop them off in? I tried to find where the other apps are installed in my nook that I directly download from the android market, but I can't find their location. Please help me out, I really need some of the apps I have and I can't even find them or can't download them directly. Thank you for your time!
Click to expand...
Click to collapse
Use adb
Code:
adb install myapp.apk
ros87 said:
Use adb
Code:
adb install myapp.apk
Click to expand...
Click to collapse
Thanks for taking your time to help me I really appreciate it. I've run into a problem though. when I try to set up adb it wont find my device in the cmd prompt. I am following these instructions to set up adb: search in youtube "ANDROID SDK Tools (How-To Install)" first video. I get stuck at the part at 6:23 it just says "list of devices attached" and doesn't list anything. I don't know what am doing wrong .
psbear532,
You can use a file explorer program (astro, es explorer, etc), and choose the apk on sd and install it. Just remember to use nookcolortools and de-select and re-select the non-market app box.
I guess it would be easier - I haven't had luck with adb so far...
psbear532 said:
Thanks for taking your time to help me I really appreciate it. I've run into a problem though. when I try to set up adb it wont find my device in the cmd prompt. I am following these instructions to set up adb: search in youtube "ANDROID SDK Tools (How-To Install)" first video. I get stuck at the part at 6:23 it just says "list of devices attached" and doesn't list anything. I don't know what am doing wrong .
Click to expand...
Click to collapse
Assuming you've successfully rooted your NST:
1: Enable wifi on your NST and make a note of the IP address assigned to it.
2: Tell adb to connect to that IP
Code:
adb connect 10.0.0.2
That's it, if adb was able to connect you can now adb push or adb install all you want
---------- Post added at 01:41 AM ---------- Previous post was at 01:39 AM ----------
apeine said:
psbear532,
I guess it would be easier - I haven't had luck with adb so far...
Click to expand...
Click to collapse
Why?, apart from having to download and install the Android SDK, using adb should be straightforward unless you're trying to get it to connect to the NST trough usb.
Ros87,
Maybe that was my mistake. I've always tried using USB :S
apeine said:
Ros87,
Maybe that was my mistake. I've always tried using USB :S
Click to expand...
Click to collapse
Getting adb to work over USB on the NST is a pain in the a**
Some people have reported getting it to work with the Google drivers, but none of them worked for me in W7. Also I'm unable to try it in Ubuntu as I'm running that trough VMware Player and I cannot redirect the USB port properly.
Thank you both so much! Ros87 I got it to work over wifi which I think is even better since now I don't even have to deal with the wire. apeine I didn't try your method since adb worked, but thanks for your time anyway.
ros87 said:
Getting adb to work over USB on the NST is a pain in the a**
Some people have reported getting it to work with the Google drivers, but none of them worked for me in W7. Also I'm unable to try it in Ubuntu as I'm running that trough VMware Player and I cannot redirect the USB port properly.
Click to expand...
Click to collapse
So why don't you install linux on a separate partition?
How does one do this without an SD card? I will be getting one soon, but for now, can I just create a temporary folder on the home directory and install it from there? Does it automatically install to the apps directory?
Thanks!
EDIT: I just figured out how much you can browse with the computer. So...
The simplest method is to just copy the apps to an SD card, insert the card,browse to the .apk location,tap on the .apk file, you will be prompted with an screen asking if you want to proceed to install or just use the adb over wifi method as explained above
I use and app names Airdroid. It allows you to install apps remotely from your computer via wifi.
I have an "apk" folder in my UbuntuOne account, Dropbox should work too.
then i have the app for the service installed.
it works fine for me

[Q] ADB Issue - device offline

A couple of days ago I flashed Eclipse v2.0, wanting to change my phone up a bit I had been on shift3r for a few weeks. Anyways, just now I was trying to copy some modules into my /system/lib/modules to overclock my device and was having issues copying within my phone. So I tried to use an adb shell to do so, but I keep getting the output of the device being offline, this is what I'm getting:
-NV57H:~$ adb devices
List of devices attached
0A3BAF200C014015 offline
And I have done a search, where some people were having trouble using certain cords, mainly with Samsung devices, and switched cords with success. This does not apply in this situation as I have used adb many times with the cord I'm using, and also I did try to switch cords anyways. Also the only other thing I saw was a situation involving driver installation and re-installation creating problems. As I am on Lubuntu, and not Windows, this does not apply to the situation because I have neither installed or re-installed drivers. My adb is setup properly because I have been using this computer for a couple weeks now and it was working previously. Any ideas on anything that could have happened? or maybe I should switch ROMs?
additionally: on my file manager, in the address bar for my device when it is plugged up, it is seeming odd to me, this is now what the address is showing for my device's sdcard:
gphoto2://[usb:002,007]/
I think I might have messed something up on my Bionic. If you read the first post I was saying how I tried adb on the same computer I've been using, AFTER flashing Liberty. Well I've gotten rid of Liberty and went back to SHIFT3R to try to fix the problem, and my problem is still looming. I have tried on Lubuntu and Windows, and my girlfriend's Incredible 2 works on both of the OS's with the same cables I'm using as well. I remember the other day when I was flashing Liberty, I had to mount my USB while in recovery to move the file onto my SDCARD because it had vanished once I tried looking for it to flash it. I remember when I tried to eject my phone from my computer (lubuntu), it said that it was busy and could not unmount the phone, after the file transfer screen went away as well. And then I waited a few minutes and tried again, it said the same thing, but I unplugged the cable anyways and unmounted USB in recovery. The file flashed fine so I know it was not still transferring the zip file. If anyone knows what I may have done or what I may be able to do to fix this let me know. I just wanted to update the thread with my most recent trials and errors in fixing it. Thanks to anyone who can guide me. I have never had issues with adb before.
O man i really hope someone can help us with this issue.
I have the same problem..
I am trying to use the path saver, and it keeps telling me device offline.
RSD lite won't even recognize it.
HELP!!!
Me too
I had the same problem... I wanted to upgrade the radio on my Bionic to the .901 load... I could not get adb to see my device.
Using Windows 7 64 bit (Ultimate).
RSD Lite would not recognize device either.
Decided "Screw it", I'll just go back to my nandroid backup... which didn't work either.... soooo... here I am.... stuck.
Off to google I went... I don't know which of these fixed it, but it is working now... here is what I did.
Found a thread that stated "run your commands from the 'C:\platform-tools' directory... so I took all of the files from the "Bionic Path Saver 1" and copied and pasted them into this directory.
Secondly, instead of just double clicking the upgrade batch file (runmebbb.bat) like I was before, I opened a DOS command shell -IN ADMINISTRATOR MODE- and ran the batch file from there.
It immediately kicked off and I was off and running.
For those of you that don't know what I am talking about, I was upgrading... using instructions from this thread:
http://forum.xda-developers.com/showthread.php?t=1433783
I hope this helps... it bugged the crap out of me... but the feeling of relief certainly makes up for it.
Well the thing is it doesn't work on windows or Linux with my bionic. I've tried various Android devices that I own and all of them work on both of my operating systems except for my bionic
Sent from my DROID BIONIC using Tapatalk
Same issu
I just installed Eclipse 2.2 on my Bionic and now i am getting the same issue. Has anyone found an answer or a fix for this? Also, does the .902 patch have anything to do with it? Any help is greatly appreciated.
Once i had this problem the only way i fixed this was by using RSDLite to flash a FXZ. Changing ROMs didnt work, nothing worked but that. It wont affect RSD reading the phone in AP Fastboot mode. Just make sure you install moto drivers and have the newest version of RSD Lite. That worked for me, now I have my adb back
Sent from my Transformer TF101 using xda premium
Are you using Safestrap recovery? If so I think that may be the issue.
Try downloading "ADB Over Wifi" from the market.
Then "adb connect iport"
The widget should show you ip/port when you activate it.
Bionic 2.2 Eclipse adb device offline
Hello,
I am having the same problem. I'm using Safestrap. Droid Bionic on the 902 update, rooted with Eclipse 2.2. Everything is fine except adb shows my device as offline. I've looked on this forum and searched and it's not the cable. Also ADB over WIFI does not work. I'm not sure why it has the result it does there should not be 2 ports...
COMMAND: adb connect 10.0.2.2:5555
RESULT: unable to connect to 10.0.2.2:5555:5555
s.wyckoff1 said:
Hello,
I am having the same problem. I'm using Safestrap. Droid Bionic on the 902 update, rooted with Eclipse 2.2. Everything is fine except adb shows my device as offline. I've looked on this forum and searched and it's not the cable. Also ADB over WIFI does not work. I'm not sure why it has the result it does there should not be 2 ports...
COMMAND: adb connect 10.0.2.2:5555
RESULT: unable to connect to 10.0.2.2:5555:5555
Click to expand...
Click to collapse
First of all, it automatically adds 5555 into your address so instead use
Adb connect 10.0.2.2 or whatever your ip is. And as far as not showing your device with a USB cord, try various other cables. I have over ten cables and maybe two work with my bionic. I urge you to use as many as possible before my next recommendation. This problem screwed with me for a couple months and finally i booted into fastboot mode and FXZd my phone. I booted my phone up after that and adb worked perfect. I don't know what causes this.
Sent from my DROID BIONIC using xda premium
Eventually I discovered why adb wasn't working. Apparently there was no adb daemon running. I came across this in a different thread awhile back. Once I copied it to my phone's /sbin/ directory (there was a link to the file in this post http://forum.xda-developers.com/showthread.php?t=974824) and ran adbd from a terminal I could use logcat. However it was removed everytime the phone cycles power so only a temporary fix. I was considering trying another rom instead of eclipse 2.2. It was also buggy in that when I tried to do an adb install it broke terminated the daemon.
If you're using linux I always do "sudo adb start-server"
Sent from my DROID BIONIC using Tapatalk 2

Simple explanation to fix ADB unauthorized device in 'M'

QUESTION: Can someone please explain in simple form how to fix the ADB unauthorized issue that has been present since the update to M? The option for removing any current rsa keys is gone from the developer settings. And when you plug your phone in to a new computer it used to pop up a notification that would let you accept the rsa key. None of this is working any more. I cant believe that it is not a bigger issue and I have spent a few hours over a few days looking for a solution so if I have missed it, I am sorry. I have read a few things that say that google has just removed the ability to use adb and one post even explaining that, what looked to me to be a prop file variable, needed to be changed from 0 to 1, or vise versa, but didnt explain where the variable was. I dont see anything that I am confident with in the build.prop. Thanks. Please explain so that anyone will be able to overcome this issue, or point to a link.
Are you talking about the option to "Revoke USB debugging authorisations" under Developer options? It's there, at least on my N6 running stock 6.0.1 MMB29V... And I just tried to ADB to my device and the popup for the authorisation came up on the phone, just as it should.
I think you have some other problem going on.
Are you running the latest adb/fastboot tools on your PC?
Article showing removal of ADB
stevemw said:
Are you running the latest adb/fastboot tools on your PC?
Click to expand...
Click to collapse
Yes I am, I always use the one directly from the 'platform-tools' directory in the SDK. Another thing is I have read multiple articles that actually state that Google has removed the adb functionality in marshmallow... I don't get it. I even went from stock G.E. to CM an its exact same problem. Not to mention now I am dealing bwith the fact that the nethunter kernel isn't compatible with the CM build for Nexus... What!? Anyone can enlighten me on that subject I would love to know that as well... LoL. Here is link to one of the ADB articles though.
Tekto-kodi.com/kodi-news/marshmallow-android-6-removes-adb/
I looked at your link and the links provided in that article. The only thing I can read from those is that the ability to run ADB from your phone, i.e. from the terminal emulator (not your PC) has been removed. Are you trying to run ADB from your phone or your PC (I was under the impression that you're using your PC, but I have to ask)?
As I stated before, ADB from my PC to my N6 works just fine with Marshmallow (6.0.1 MMB29V).
You say that you use ADB directly from "platform-tools", but you don't say if you've updated the tools from the SDK-manager.

ZUK Z2 Pro - ADB not working

Hi,
I just got my ZUK Z2 Pro 6/128GB.
first I had the Problem that the OTA to 2.0.048 was not working. I got the notification but when i tried to download it, it was saying "no Internet Connection". Internet is working with browser or any other app.
After that I downloaded the 2.0.048 directly and installed it via SD Update which worked out fine.
But I still get the notification that there is an OTA update.
My Major Problem is, I tried to switch the Google-Play-Store to German according this How-To
can not post URL... it is the italian How to
Everything worked out fine until I get to this part to “Grant permission” with ADB (run.bat)
I am not able to see my phone in ADB whatever I do.
Had the Standard Drivers installed, used the "Adb Driver installer" and also deinstalled the Driver manually and used this How-To
can not post Url.... it is the way with PdaNet Installation which changed the drivers
Still no phone in ADB.
Do you have any idea how to solve this?
I tried this on 3 different Pc's (2 x WIN 10 + Win 7) in several different USB ports
I've got the same problem.
Any ideas?
I even tried it yesterday on a Win XP machine... no success.
USB Debugging is on of course.
Check post 13 in the thread... it worked for me...
http://zukfans.eu/community/threads/how-to-install-google-play.32/
Funky-Fab-4Strings said:
Check post 13 in the thread... it worked for me...
http://zukfans.eu/community/threads/how-to-install-google-play.32/
Click to expand...
Click to collapse
I tried this method but I still get adb server is out of date. killing... adb server didn't ack * failed to start daemon * error. If I wait long enough I get "list of devices attached" but it's blank. This seems hopeless
Swarai said:
I tried this method but I still get adb server is out of date. killing... adb server didn't ack * failed to start daemon * error. If I wait long enough I get "list of devices attached" but it's blank. This seems hopeless
Click to expand...
Click to collapse
I've executed "ADB DEVICES" for my OP3 and it was listed, but the Z2 pro cannot be seen. Is there a driver that I'm not seeing?
Swarai said:
I've executed "ADB DEVICES" for my OP3 and it was listed, but the Z2 pro cannot be seen. Is there a driver that I'm not seeing?
Click to expand...
Click to collapse
I had the same Problem until i installed the android sdk as descripted in my previous post... Debugging and USB 2.0 is activated in the phone?
Funky-Fab-4Strings said:
I had the same Problem until i installed the android sdk as descripted in my previous post... Debugging and USB 2.0 is activated in the phone?
Click to expand...
Click to collapse
Yes, debugging USB 2.0 are activated. I've set up adb using the android sdk at least twice. When I type "ADB DEVICES" my Oneplus 3 is listed. I do not get the same result for the Zuk z2 pro? I don't know why?
So I've solved my problem. I'll try to explain it the best way I can. Apparently I had 2 sets of ADB in 2 different locations on my computer. I plugged in my other phone and typed "ADB DEVICES" in folder got the same "ADB didn't ACK" result. I tried again in a different folder but it worked. By this time I already updated my Zuk Z2 pro to 2.0.048 ST. Hope this can help. thanks
The problems with adb can have something to do with your time and timezone (check if these are correct)
That is also an issue with contacting the google servers.
To download an OTA you need to have a vpn to a chinese server. It is geo-locked. -> after vpn connection is made, stop update service + clear cache. Then check again, it should work according to some.
Hello everyone, I thought I was having the same problem, so I tried to solve with the methods posted here, but after some research, I found out that the "ADB interface" is not showing in Windows device manager
I tried to install it manually, but can't find a way to get it working, and while it seems my phone just bricked after a failed flash, the USB debugging was set on, so can't figure out what could be happening...
Any idea about how to get it working back?
Thank you in advance.
Just to say that I have tried multiple combinations while plugging the device to the PC, and didn't worked...
I mean, the PC seems to react, but always with the same end, only shows the Qualcomm port 9008, nothing about the adb...
Getting out of ideas, anyone more has some?
Anyone managed to find a solution for this issue?
Thanks!
Update to last adb drivers. It worked for me.

Categories

Resources