Hi all, i recently bought an htc hd 2 used, and i have the following problems with the wired stero headset - earphones included in the box, ill describe what they do and what they wont do, as the previous owner informed me the hands free where almost unused, that means they are like new, and believe me they look like new.
The htc hands free do:
sound will come out of the speakers when i play music
as an antenna for the radio player
The htc hands free wont do:
the mic wont work when im on the phone, i only can hear they canot hear me
and finaly the controls play / pause / next / previous / answer call buttons wont work
I hope you can help me with this problem.
OS: 5.2.21869
manila version: 2.5.19211619
rom version: 18/11/09
radio version: 2.05.51.05_2
Exactly the same issue started cropping up a few weeks ago- strange as it worked perfectly for 5 months.
Hi rieuwa if i find some time i will try to replace the rom with another to see if the problem persists, i dont think is a hardware problem, as i said the earphones are barely used, i think that there might be a software problem.
rieuwa, did you try to restore the rom ?
Hi telas, I actually went in to three phone shops today, until I found one that had a spare HD2 wired headset with buttons to test.
Sure enough, in my case it's the headset that is broken. It worked fine with his headset. Currently with mine I can play music just fine, but the three buttons just don't work.
So I'm just about to start a support call... 'Dear HTC...'
I'm wondering if some sort of short in the plug isn't also causing my other problem whereby occasionally with the headset plugged in, my volume controls on the phone suddenly change into next track/previous track, with no way to get out of that other than a soft reset or turning off the phone (and the HD2 isn't the fastest booter....)
Good luck with yours!
Hi there and thanks, actually my case gets more and more weird, my roommate just bought today an htc hd 2 himself, i asked him if the hands free work he said yes, i said lets test YOUR handsfree on my device, after we pluged it in we pressed the buttons and music played the controls all ok, i said lets plug MY handsfree on your device to see if my handsfree are broken or not, and guess ? THEY DID WORK!
Then we pluged in HIS handsfree on MY device to see if they work and they worked, then we tested mine again on my device and they didnt and now the grant finale, i asked him minutes ago to test his handfree on my device again to double check anddddddddddddddddd THEY DIDNT WORK!!!
Facts:
My hands free work just fine, on other devices
Hands free from other hd 2 devices work fine on my device
Hands free from other hd 2 devices will work for one time only
WTF?
I have same problem headphones buttons not working and when call connected i can hear, but caller not (also i cannot answer with headphone button). After installed 3.14 stock rom headphones buttons problem was random and just after moons using buttons not working every time. So i hear need to delete BsB Tweaks or just disable some options, i try but no luck. I decide to back to my first Htc Hd2 stock rom 1.66, with this rom when i buy Hd2 headphones buttons works fine and just several times i have problem with starting music with button. But what, when i install 1.66 stock rom and try headphones - buttons not working, WTF?
Sorry for my very bad english, but are you guys have any ideas about this problem?
Hey and im having the same problem too, headphones used to wrok perfectly, in my 1.66 rom, upgraded to 3.14 and the problems started, during this time, in a Cyanogen Mod build of android i checked a setting that said "use buttons on headset" so i could control my music in android, and well after reverting back to a 1.66 rom....headset play forward and backwards buttons wont work but music will play through the headset.
I Highly doubt android could be the culprit, and the roms are only software, so maybe its a hardware issue, even though ive used my headset very carfully...im going to try with another set of htc headphones and see if i can find a solution...very wierd.
Related
Hi all,
Need help with my HTC Diamond. As my Pioneer car navigation, with which the diamond bluetooth functioned well, was stolen, I was advised to mount a JVC navigation system NX7000 with a detachable front in order to prevent theft. However, the HTC bluetooth dysfunctions. It connects and pairs without problems, but when the diamond goes into sleep or is switched off, it is impossible to establish a phonecall using the JVC car-unit, although it indicates that blueconnection is still valid. When I switch on the phone, even minutes later, it will eventually do the call. If I force the HTC to remain powered-on it will function normally. I am sure that this has something to do with a suspend-mode of the diamond bluetooth part and that this can be solved by the right registry tweak. I tried several tweaks that I found on the forum already but without succes. I upgraded the HTC to the latest firmware 2.03 but no improvement.
I called with HTC and they said that they know the correct registrysettings but they won't supply them because of "licence restrictions"...........
Anybody the same problem? Somebody who has the solution?
Thanks
I have exactly the same problem! Incoming calls work fine, but like you, I cannot initiate outgoing calls from the JVC unit unless the diamond is turned on fully. I there's not a fix for this, I may have to go out and buy an iphone again after selling mine to get a diamond!
there is a fix but HTC won't tell. they suggested to open a thread on this forum in order to get suggestions on the matter. and so I did. When I subsequently asked them if they would post this solution on this forum they said they would not :-(
Bluetooth problems across the board with JVC NX7000
drpellypo said:
I have exactly the same problem! Incoming calls work fine, but like you, I cannot initiate outgoing calls from the JVC unit unless the diamond is turned on fully. I there's not a fix for this, I may have to go out and buy an iphone again after selling mine to get a diamond!
Click to expand...
Click to collapse
You may not want to fall back on an iPhone with the JVC NX7000. Not to go too far off-topic here, but pairing an single iPhone works great (once I figured out the overly complicated menus). BUT...it won't let me pair a second phone (of any kind). Once the first phone is paired, all pairing menu options are greyed out ("Search" and "Open"), thereby preventing any further phones from being paired. I first need to unpair the first phone before I can pair the second one. JVC Support is comically unhelpful.
Has anyone had luck paring more than 1 phone (of any brand) with the JVC NX7000?
You are the lucky one! You can succesfully pair one phone but it works
I don't care if I can only pair one phone. I only have one phone! lol.
Hey guys!
kind of the same problem here but with the Volvo built-in bluetooth solution. Actually when the device sleeps and I initiate a call it will take some time, then the device will turn on and it will begin to dial but drops immediately. When the device is fully turned on there is no problem at all. Incoming calls work just fine. Even though it first rings on the phone and after a second or two it will ring in the car and the device will stop ringing. Which confirms that bluetooth sleeps somehow and only connects fully when the device is fully awake.
It really looks like bluetooth goes to sleep, so we need a solution which keeps bluetooth awake even if the device itself is in sleep mode.
Patrick
Exactly the problem I described. It's a sleep or suspend mode of the bluetooth that causes the dysfunction. I can pair nokias wih JVC without any functional problem, they work like a charm. It is really a HTC related problem, I tried a lot of registry tweaks suggested for similar problems in other HTC devices, but no luck so far.
Reply to Guitartng:
storing multiple bluetoothdevices in the JVC for subsequent use can be done by selecting "new device" and then go to "bluetooth setup".
Exact same issue with a Kenwood DNX 8120 double din unit.
If anyone finds out the solution, please post it here. I'll keep searching.
Good News Lads!
Well after blowing my head of trying different roms and radios got a solution.
The solution comes from JVC stereo and not from Htc diamond Phone!
You have to set special phones To Samsung E520 and then pair device with the htc diamond. It works like a charm, know I can make calls through my JVC stereo and NO MORE deep sleep of htc diamond.
Try with samsung, it work for me, if not try with other phones in special phones before pairing!
Cheers!
I just wanted to let you know that I also was able to fix my bluetooth issue by flashing stock firmware 2.03.405.3 WWE with Radio 1.09.25.23. I was previously using Dutty's V4 which is based on 2.03 afaik, but it look like Dutty tweaked something on the bluetooth stby behaviour.
Anyway, it works like a charm now and the whole calling and answering process is also much faster!
Hi there. I was wondering if anyone could help me with an issue I am having after my 1.5 update (non-rooted). After my update I played around with it for a bit and love it but I went to play with my bluetooth and I can't listen to music through the headset like it said it was suppose to do. I get a ringing noise when someone calls but no music thru it. Did I do something wrong with the manual update or something? If someone could help me I would truly appreciate it.
Also I was curious if its possible if I can root my phone after the update or is it not an option anymore? I been thinking bout it now and is loving the cool themes you can get.
Thank you so much for your time
i to have this problem from time to time
i manage to fix the problem temporary by going to the phone's settings > Wireless controls > Bluetooth settings > klick and hold the bluetooth device till a popup comes > Options > then toggle media off and on
then my headset works out fine
ps: i just repaired my headset as a test, witch i dint do after the update and it seems to work after turning off bluetooth and the device
ill give u an update if it works after a couple of times
Thanks for responding. I have tried for 2 days now to try to get it to work and I haven't gotten it to work yet. I kept my music running while trying to disconnect and reconnect the headset (motorola H690) and nothing and then earlier I got a phone call while I was listening to my music off my phone and I got a phone call and I answered it via bluetooth and when I got off the phone I could hear the music for a couple seconds and it shut off and started playing on the phone speaker. I don't know what the deal is.
i to still have that problem
i can start and stop the media from my bluetooth device but it will play on my phone
still when i toggle media off and on in the bluetooth device options it fixes it sometimes for 3 connects sometimes till the next session
what happens if u toggle media off and on with ure G1?
Yeah it still hasn't worked for me and I've done the same things you havei don't know what the deal is.
im not sure if this is the same problem but my g1 is rooted & i have it paired with my bluetooth in my car & when the phone rings... it rings through the car speakers but when i answer the call all sound comes thru the phone... same when i make a calll.. instead of it working thru the car speakers & mic it only wrks thru the g1 itself..
Exactly the same issue as i3lazen
My phone is totally standard running 1.5, just about to go and sell the phone and go back to my HTC Kaiser as it works with no issue.
I can stream music to my BT car stereo no problem but if I can't send and recieve calls then I'm stuffed.
If anyone has any advice, it would be appreciated as I'd love to keep my G1
Hey guys,
try the fix here: http://forum.xda-developers.com/showpost.php?p=4177831&postcount=329
Thanks for the link but is that not just for improving sound quality and not a BT fix?
i3lazen said:
im not sure if this is the same problem but my g1 is rooted & i have it paired with my bluetooth in my car & when the phone rings... it rings through the car speakers but when i answer the call all sound comes thru the phone... same when i make a calll.. instead of it working thru the car speakers & mic it only wrks thru the g1 itself..
Click to expand...
Click to collapse
I had this issue with my rooted phone, and then I updated the radio to 2.22.19.26I and this fixed it. Not sure if this is related to the non root phones but it may be related to it if the radio wasn't updated in the upgrade to 1.5
ashleyglassel said:
I updated the radio to 2.22.19.26I and this fixed it.
Click to expand...
Click to collapse
I've got that radio on my non rooted phone but still have the BT issue
This is my first, and only a minor, contribution to the forum; I've been a feeder up till now.
I bought a cheap bluetooth headset for my HD2 for use with my motorcycle satnav and also my HD2 - not that I want to take calls whilst I'm riding, but playing music would be a possibility. It was similar to this:
http://cgi.ebay.co.uk/Bluetooth-V2-...e_Phones_Bluetooth_Acc_ET?hash=item3efab16de4
I paired it with my satnav and could hear voice commands and music as expected. I then paired it with my HD2 and could only get calls, no music playing!!!
I tried looking for settings on the HD2 but nothing made any difference so I decided to look in the registry. After a while exploring I eventually found:
HKLM/software/widcomm/BTconfig/devices/
There were three devices paired (HD2, satnav and my car) so next I had to work out which one. I found that if you look at the nickname for each one, it's decoded into english by the Reg Editor (I use CERegistryEditor). Using trial and error I found that changing the setting "Hideconnections" from "0" to "1" did the trick. I can now hear music through the headset!!!
Well chuffed with myself!!!
PS Perform a soft reset after changing it to lock it in otherwise it resets to "0" after a disconnect.
OOPS! because I was looking for Bluetooth stuff I posted this in the wrong area, sorry!!! Maybe a moderator can correct please?
How bizarre it works by default for me......well done on the find though
Thanks...
It doesnt work for me, im using samsung mono bluetooth. I've tried many methods like btaudio bttoggle.... any help, thanks
All I can suggest is that - like I did - compare settings with something that does work. Maybe because you have a mono headset (mine is stereo) it's not capable of receiving music?
Hi
I could play music and receive system sound in my Jabra mono bluetooth earpiece if, in HD2, I go bluetooth->advance->Audio and check "play system sounds on remote hands-free device". However, after a phone call, the music and sound will be routed back to the phone speaker, though the earpiece is still connected (you can still make/receive phone calls through the earpiece).
The music and sound can only be routed to the earpiece again after a soft reset.
The other observation is that, if there is pause in between music or sound for a period of about 12 to 15 seconds, the HD2 will "suspend" the bluetooth transmission (beep in the earpiece) and resuming the music will cause the bluetooth transmission to be re-established (beep sound in earpiece). This is causing skipping of the first 1 to 2 second of the music / sound.
Have installed BTaudio V1.0. It is working on my HD2 and will keep the transmission constant and no skipping problem.
However, also needing soft reset after phone call.
Does any one has similar experience ? Is this earpiece/ head set related of is this HD2 related issue ?
No one has simialr experience ? Is there a thread on bluetooth related registry tweaks, I have been searching for it but don't seems to be able to find one. Any help will be appreciated.
anzudragon said:
It doesnt work for me, im using samsung mono bluetooth. I've tried many methods like btaudio bttoggle.... any help, thanks
Click to expand...
Click to collapse
+1 as well
I have a Samsung WEP420 mono bluetooth and no success either.
Armes said:
I tried looking for settings on the HD2 but nothing made any difference so I decided to look in the registry. After a while exploring I eventually found:
HKLM/software/widcomm/BTconfig/devices/
Click to expand...
Click to collapse
I don't have that reg key at all! I have a dutch hd2 running stock 1.66. When I try to connect to a parrot party bluetooth stereo box this (most of the time) doesn't work. Once or twice I established a working connection but after trying multiple times with no luck I decided to find a fix for my problem. Now I try to edit my reg with this and it's not there!?
i paired the hd2 with the car kit parrot ck3100... leaving apart that it doesn't connect always... although i have checked in settings to play all phone sounds through BT it doesn't...
i think it's a BT problem of the hd2, or maybe all WM phones... 'cause ițve had issues like this before...
P.S. once it played the music thorugh the car kit... just like this...
Hey guys, i`ve been browsing the site for a while and thought it about time to make an original contribution. I was looking for a blue tooth headset and my searches here lead me to the MW600. quite a few people were asking about it so i thought it a good opportunity to give my review now that i have one!
from the start then, i bought this as i have a very nice pair of headphones i wanted to use with the phone, but could not be doing with cords. most bluetooth headsets have their own headphones which i get along with even less. this seemed a perfect solution to both problems.
the box it comes in is flimsy at best, indeed the plastic tab to hang the box on is completely lose, useless for hanging up in a shop.
out the box, its a lot smaller than i imagined but a bit thicker too. it comes with a charger that handily also fits the HD2 which is an added bonus and un expected!
when i paired up to the phone i was very surprised to find that the unit displayed the song info correctly. i honestly did not expect this to work outside of a sony erricson phone but it works! the next track and previous track buttons work as well, as does the play and stop buttons.
the hands free works fine as well with the person who called me not knowing i was on a hands free.
the volume control is awful, they decided to use a slider that half the time does not register me raising the volume and when it does its impossible to get the right volume setup, its either too high or too low and the slider is too imprecise to get the setting i want!
I cannot comment on the enclosed head phones as i never used them!
When i play some music through the device ( and that is of course what its for) the results are slightly dispaointing. the sound is okay, but that is about as best as i can describe it. maybe its because i am spoilt by the good quality output from the 3.5mm jack on the phone, maybe i am just used to having some EQ on (which the unit does not provide for and the phone says it cannot apply `audio booser` without somer thing being plugged in the 3.5mm jack) but the bass is there (thanks on no small part to the ehadphones rather than the unit) but the mid seems `transparent` with no real hit and the highs are annoyingly 'sparkly'. This os of course my opinion, and others may find the output perfectly fine and for comparison i also do not like the output of ipods as i find their mid lacking as well so if your happy with i pod output you maybe happy with this units output,
I have never needed to re charge the unit yet after 3 days of having it and listing to it in the morning for 2 hours and on the way home for an hour so the battery seems quite good.
I love the unit but the quality of the output means i will only really use it when i have to, prefering to use the audio jack output, i am however going to look into how the unit works as i suspect the phone is sending SBD encode audio and not the native mp3. if i can ge tthe unit to decode MP3 and the phone to send mp3 then i think we have a winner!
For reference i used CD originals encoded to lame 3.98 -V1.
just ordered mine. thanks for the review. i will also post up my opinion of the headset when it arrives. if it is as good as the include wired version, that will be good enough for me.
Hey thanks for the review as I'm getting one but you didn't speak about the radio does it work? anything else? cheers mate
Thanks for your review.
But could you edit it so that it's not so hard to read?
Spaces between a few sentences would suffice.
Thanks for the review, install WOW SRS and it should improve the sound quality via bluetooth but it will kill audio booster when plugged with the 3.5mm jack and always use WOW SRS.
Vrery nice, all working apart from Cyberon voice dialer, you can initiate Cyberon voice application by clicking the phone button on headset but can't pass voice to the phone as it doesn't recognize voice. It looks like the problem relates to cyberon not mw600.
idonxda said:
Vrery nice, all working apart from Cyberon voice dialer, you can initiate Cyberon voice application by clicking the phone button on headset but can't pass voice to the phone as it doesn't recognize voice. It looks like the problem relates to cyberon not mw600.
Click to expand...
Click to collapse
It's a problem with the HD2 bluetooth stack. I managed to get it working with a new radio, a Miri ROM & a modified Cyberon cab
MrGubby said:
It's a problem with the HD2 bluetooth stack. I managed to get it working with a new radio, a Miri ROM & a modified Cyberon cab
Click to expand...
Click to collapse
Hi Thanks, can u plz tell me the version of radio and rom? i need everything to be working!
Anyone else had any experience of this device on HD2? Probably going to but one but would like more reviews before I do.
idonxda said:
Hi Thanks, can u plz tell me the version of radio and rom? i need everything to be working!
Click to expand...
Click to collapse
Hi, I'm using a Miri 6.5.x ROM version V.10 with Radio 2.08.50.08_2
MrGubby said:
Hi, I'm using a Miri 6.5.x ROM version V.10 with Radio 2.08.50.08_2
Click to expand...
Click to collapse
Hi i can not seem to find v10 only see 6.0 and 7.0 any chance of a quick tutorial aswell. Someone else installed duttys rom for me. Advise please as i would like to get this bluethooth button working with cyberion voice using Sony Erricson MW600 stero head set.
The links to the modifyed cabs also please.
badman112 said:
Hi i can not seem to find v10 only see 6.0 and 7.0 any chance of a quick tutorial aswell. Someone else installed duttys rom for me. Advise please as i would like to get this bluethooth button working with cyberion voice using Sony Erricson MW600 stero head set.
The links to the modifyed cabs also please.
Click to expand...
Click to collapse
The Miri V10 ROM is on the HTCpedia forums (I think it is V11 now, not tried it)
Just got mine, tried it and I have to say:
THE MUSIC QUALITY IS CRAP!!!!!
headphones arrived today. WOW. excellent audio and far better than oem headphones. have yet to play with it on radio etc, but so far very impressive.
I have a problem
After the end of any audio file
Lose "stereo audio" connection
and have to push the play button to reconnect "stereo audio"
and also
After the end of calls
Lose "Hands Free" connection
and have to push the Talk button to reconnect "Hands Free"
but if i received a call
"Hands Free" reconnect automatically
But there is a delay for two seconds
I do not know this is normal?
Like power autosaving!!!
this is definately not normal. mine works flawlessly. no need to reconnect ever. i would suggest checking your bluetooth settings and pairing settings again to make sure everything is correct.
I am using smartWatchM with Sony Ericsson MBW-150
I think there is a conflict between the Watch and mw600 connection
The problem is from latest windows build (23569) & (21903 )
When i go back to an old build like (23519)
There is no conflict between the Watch and mw600 connection
Waiting for a solution to this problem or update for Windows without problems
Delays
Does anyone else experience a 3-5 sec delay when the HD2 jumps 1 song/chapter forward?
My combination gives a this delay, which is especially annoying when listening to audiobooks!
I miss a few seconds of every new chapter, need to manually jump 1 chapter forward and the back again.
Does not appear when manually going forward/reverse only when HD2 is in control.
I have a problem with my unrooted Xperia Z with a locked bootloader. My main speaker does not work for any media like music games or videos, but works fine for loudspeaker calls. Also the earpiece speaker doesnt work at all. Another problem i found was that my microphone would not work at all unless it was in a call and i was using loudspeaker. The final problem is that when ever i plug in my earphones, google now pops up and sometimes my phone starts playing music automatically throught the earphones, when i remove the earphones, instea of stopping the music continues but the speakers dont work so it just keeps playing them silently. If anyone knows the soultion to this, please respond as ive searched everywhere and i have not found one solution yet.
UPDATE: i used the application soundabout to reroute the audio and the calls are now fine, the only problem is that when i plug in my earphones the google now problem persists. If i plug in earphones with a mic, i dont get any of these problems and everytime i want to use my internal speaker for media, i have to manually re-route the audio to them. Anybody know a solution to these 2 problems?
I do have the exact same problem, I tried different ROMs and Audio Mods (at the moment I've got a stock ROM) without any change.
Did you somehow fix it?
Exact same problem, i run stock android 5.1.1 build 10.7.A.0.222 locked boot loader. Problem suddenly came up last week during vacation, quite some time after I did OTA upgrade to 5.1.1 - so this is not related to ROM updates.
After installing soundabout (thanks for the hint) the rerouting did not work immediately - i had to set phone to earpiece and media to speaker in the app and reboot for it have an effect.
I think the root cause is, the phone thinks there are headphones connected, when there really aren't. If I use the UKW radio app, it starts and shows headphones as output-icon right away - it should actually complain that there is no reception without phones because the antenna (headphone cable) is missing. Since it doesn't complain I guess that's the culprit.
Any hints how to fix that, without using a rerouting app? (kinda stupid, using bluetooth speakers and so on now needs a manual setting change in soundabout).
I have that phone for more than 2 years now and used headphones maybe twice with it, so a busted headphone-jack is out of the question too.
Guys give it a try.
Thanks Ess Arr, that really works!