Database Develop

OTA 139.15.1 keep root

All,
Has anyone on Verizon done the OTA update and kept root? From what I've been reading, sounds like if you rooted with MotoRoot then you're okay, but not if you used PwnMyMoto.
As far as people getting a bootloop, that does make some sense because the recovery partition is really just the boot image... So I can flash the stock recovery to the recovery partition before running the update, and that should theoretically prevent a bootloop. However, if this is going to erase my root, then I don't want to do the update.
So, has anyone on verizon done the OTA and kept their root? How did you do it?

First item, this is a question so it should belong in the question and answer threads! Secondly look here http://forum.xda-developers.com/showthread.php?t=2466191
Sent on my Moto X

Sorry, and thanks! I'll probably give this a shot, make that camera work a little better...

You can always install the SafeStrap ROM here. That's what I did.
http://forum.xda-developers.com/showthread.php?t=2484908
[Rom] [VZW] SafeStrap 139.12.57
Sent from my Moto X

The way that everyone (including myself) have been updating and keeping root on Verizon is as followed:
1. RSD back to stock (instructions here: http://forum.xda-developers.com/showthread.php?t=2446515)
2. Install PwnMyMoto and DO NOT RUN IT
3. Download and install OTA
4. When the install completes, your phone will reboot a few times. This is just PwnMyMoto doing its magic.
5. Profit.

dymmeh said:
The way that everyone (including myself) have been updating and keeping root on Verizon is as followed:
1. RSD back to stock (instructions here: http://forum.xda-developers.com/showthread.php?t=2446515)
2. Install PwnMyMoto and DO NOT RUN IT
3. Download and install OTA
4. When the install completes, your phone will reboot a few times. This is just PwnMyMoto doing its magic.
5. Profit.
Click to expand...
Click to collapse
This method makes it so SafeStrap is no longer available though, right? If that's not the case then... Don't know what I've been waiting for!
Sent from my Moto X

mercado79 said:
This method makes it so SafeStrap is no longer available though, right? If that's not the case then... Don't know what I've been waiting for!
Sent from my Moto X
Click to expand...
Click to collapse
I searched around and can't really find an answer to that. I don't use SafeStrap so I have no idea. I'd assume you can try the method I posted and try using SafeStrap after. If that doesn't work then just RSD back to pre-update and hang on to SafeStrap until it's figured out. No guarantees if it'd work / break stuff, though. You'd be the guinea pig for that one.

dymmeh said:
I searched around and can't really find an answer to that. I don't use SafeStrap so I have no idea. I'd assume you can try the method I posted and try using SafeStrap after. If that doesn't work then just RSD back to pre-update and hang on to SafeStrap until it's figured out. No guarantees if it'd work / break stuff, though. You'd be the guinea pig for that one.
Click to expand...
Click to collapse
@jcase Any chance you can answer this for us? Just cause someone was able to keep root (the one shot kind you mentioned), does that mean that using RSD is still on the table?
Sent from my Moto X

mercado79 said:
@jcase Any chance you can answer this for us? Just cause someone was able to keep root (the one shot kind you mentioned), does that mean that using RSD is still on the table?
Sent from my Moto X
Click to expand...
Click to collapse
If you take the OTA you dont have wY to revert to old stock Motorola block the reverts already and @jcase already said that he will be back for root in this device till 4.3 is out
Sent from my XT1060 using Tapatalk

juancaperez2000 said:
If you take the OTA you dont have wY to revert to old stock Motorola block the reverts already and @jcase already said that he will be back for root in this device till 4.3 is out
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
That's what I thought too. Thanks.

MikeyNick said:
All,
Has anyone on Verizon done the OTA update and kept root? From what I've been reading, sounds like if you rooted with MotoRoot then you're okay, but not if you used PwnMyMoto.
As far as people getting a bootloop, that does make some sense because the recovery partition is really just the boot image... So I can flash the stock recovery to the recovery partition before running the update, and that should theoretically prevent a bootloop. However, if this is going to erase my root, then I don't want to do the update.
So, has anyone on verizon done the OTA and kept their root? How did you do it?
Click to expand...
Click to collapse
For sure have I just updated my Moto X the other day on VZW and kept root. Here is a link to the process on how to do it
http://forum.xda-developers.com/showthread.php?t=2466191

will2live said:
For sure have I just updated my Moto X the other day on VZW and kept root. Here is a link to the process on how to do it
http://forum.xda-developers.com/showthread.php?t=2466191
Click to expand...
Click to collapse
I think that's not up for debate. The issue is that even though you kept root, you're now blocked from using safestrap or ever gaining root again in the future (once another ota comes through). The update has now patched root going forward and it sounds like you won't be able to keep it after this update.

MikeyNick said:
All,
Has anyone on Verizon done the OTA update and kept root? From what I've been reading, sounds like if you rooted with MotoRoot then you're okay, but not if you used PwnMyMoto.
As far as people getting a bootloop, that does make some sense because the recovery partition is really just the boot image... So I can flash the stock recovery to the recovery partition before running the update, and that should theoretically prevent a bootloop. However, if this is going to erase my root, then I don't want to do the update.
So, has anyone on verizon done the OTA and kept their root? How did you do it?
Click to expand...
Click to collapse
mercado79 said:
I think that's not up for debate. The issue is that even though you kept root, you're now blocked from using safestrap or ever gaining root again in the future (once another ota comes through). The update has now patched root going forward and it sounds like you won't be able to keep it after this update.
Click to expand...
Click to collapse
Safestrap i know about and dont care about as i dont use it. As for moving forward with root I'll be surprised if that is the case but I wont disagree either. It is very possible they patch something to actually block root down the road. From my understanding tho currently the patch is blocking ppl to root the update not keeping root if the process is followed correctly. My guess is odds are it will be the same on the next OTA just like we had to do on the original Razr line to keep root until the bootloader was unlocked. However if the next OTA is 4.3 tha tcould all change for sure as anything is possible. Even so when that time comes I'll just unlock mine. I do have a Dev edition i just haven't unlocked with it being brand new and not wanting to void warranty yet to make sure hardware is cool but i do want root so i went the long route for now is all.

dymmeh said:
The way that everyone (including myself) have been updating and keeping root on Verizon is as followed:
1. RSD back to stock (instructions here: http://forum.xda-developers.com/showthread.php?t=2446515)
2. Install PwnMyMoto and DO NOT RUN IT
3. Download and install OTA
4. When the install completes, your phone will reboot a few times. This is just PwnMyMoto doing its magic.
5. Profit.
Click to expand...
Click to collapse
So I installed PwnMyMoto, SuperSU and OTA Root Keeper, then decided not to root. I installed the Verizon update and boom, I'm rooted. Is that what you're saying is needed? I was surprised that root apps all work fine for me, I really didn't do anything but install those apks before I installed the camera update!

boardrx182 said:
So I installed PwnMyMoto, SuperSU and OTA Root Keeper, then decided not to root. I installed the Verizon update and boom, I'm rooted. Is that what you're saying is needed? I was surprised that root apps all work fine for me, I really didn't do anything but install those apks before I installed the camera update!
Click to expand...
Click to collapse
As long as you had PwnMyMoto and never ran it / not rooted you were good to go. SuperSU could be installed before or after. I dont think OTA Root Keeper was needed at all. PwnMyMoto runs after a reboot so once you installed the OTA and rebooted it did its rooting magic automatically for you. Glad it all worked out for you

dymmeh said:
The way that everyone (including myself) have been updating and keeping root on Verizon is as followed:
1. RSD back to stock (instructions here: http://forum.xda-developers.com/showthread.php?t=2446515)
2. Install PwnMyMoto and DO NOT RUN IT
3. Download and install OTA
4. When the install completes, your phone will reboot a few times. This is just PwnMyMoto doing its magic.
5. Profit.
Click to expand...
Click to collapse
dymmeh said:
As long as you had PwnMyMoto and never ran it / not rooted you were good to go. SuperSU could be installed before or after. I dont think OTA Root Keeper was needed at all. PwnMyMoto runs after a reboot so once you installed the OTA and rebooted it did its rooting magic automatically for you. Glad it all worked out for you
Click to expand...
Click to collapse
That's awesome, didn't realize that would happen automatically. I completely expected that I'd have to complete the entire root process steps that were outlined in an earlier post if I wanted root. Thanks for the reply.

will2live said:
Safestrap i know about and dont care about as i dont use it. As for moving forward with root I'll be surprised if that is the case but I wont disagree either. It is very possible they patch something to actually block root down the road. From my understanding tho currently the patch is blocking ppl to root the update not keeping root if the process is followed correctly. My guess is odds are it will be the same on the next OTA just like we had to do on the original Razr line to keep root until the bootloader was unlocked. However if the next OTA is 4.3 tha tcould all change for sure as anything is possible. Even so when that time comes I'll just unlock mine. I do have a Dev edition i just haven't unlocked with it being brand new and not wanting to void warranty yet to make sure hardware is cool but i do want root so i went the long route for now is all.
Click to expand...
Click to collapse
people who have moto employee friends say they are moving to 4.3 next. Also, there may be a work around for you to keep root with the next release, but because people who aren't on dev phones that must be sure they can retain root would not have used this method (as it is a one chance type of method). so it is more likely that any new workarounds that people come up with will be for those that still have the ability to downgrade to original stock firmware. Also, SS is nice because it gives you the ability to run the phone just like you normally would but you can create complete backups of the device so you don't have to set everything up all over again if you screw something up with your phone. Even if you don't use SS for flashing roms it is still useful for back ups.

jayboyyyy said:
people who have moto employee friends say they are moving to 4.3 next. Also, there may be a work around for you to keep root with the next release, but because people who aren't on dev phones that must be sure they can retain root would not have used this method (as it is a one chance type of method). so it is more likely that any new workarounds that people come up with will be for those that still have the ability to downgrade to original stock firmware. Also, SS is nice because it gives you the ability to run the phone just like you normally would but you can create complete backups of the device so you don't have to set everything up all over again if you screw something up with your phone. Even if you don't use SS for flashing roms it is still useful for back ups.
Click to expand...
Click to collapse
I have my Moto contacts and yes they are moving to 4.3 next last i was told when I asked. As for downgrading stock software that isn't going to happen once updated as you can't go backwards. Moto devices have been that way going back to the original Droid Razr. Its few and far between where you could actually go backwards after an OTA. So unless you mean stock of the current build installed then ppl will have issues for sure. That said if ppl OTA and have root now but for whatever reason need to use the new fastboot file that was just posted they will in fact be SOL for gaining root. This is exactly why I refuse to buy consumer units from the carrier besides a few other reason I wont go into. My theory is simple we want to mess with device buy an unlockable one or be ready to suffer/wait for an exploit after an OTA hits.
As far as root moving forward what process you talking about tho? There is 2 ways to do it. The one posted right above your post in this thread, or the link I posted above. If the info in this thread was used yes there may be an issue because of the patch. However I will be very surprised to see ppl not be able to keep root if they updated using the process in the link I posted above. Besides having to fastboot the boot.img to recovery in that process its the same way original Droid Razr owners had to update to be able to keep root if there was no root process for the OTA being pushed. Moving forward my guess is there will be an issue once 4.3 hits tho. I'm not sure you will be able to use the old kernel from 4.2.2 to overwrite recovery and boot the 4.3 /system so you can restore root and pull the actual 4.3 boot.img so that can be used for the recovery highjack. Bottom line is only time will tell at this point as you never know what Moto/Google will do with the next update.
Agreed on SS for backups even if not flashing ROMs, but personally i just dont mess with my device enough to worry about a full back i guess. For apps/settings I just use MyBackup PRO. I've also have an app a buddy made that creates a full XML if i wanted to use it. In the old days I use to make alot of backups for ROM flashing when I used SS. Guess in my old age I've just got lazy and dont worry about it that much anymore. I really hose the device I'll just swap to one of my others til i get back to fixing the messed up one.

will2live said:
I have my Moto contacts and yes they are moving to 4.3 next last i was told when I asked. As for downgrading stock software that isn't going to happen once updated as you can't go backwards. Moto devices have been that way going back to the original Droid Razr. Its few and far between where you could actually go backwards after an OTA. So unless you mean stock of the current build installed then ppl will have issues for sure. That said if ppl OTA and have root now but for whatever reason need to use the new fastboot file that was just posted they will in fact be SOL for gaining root. This is exactly why I refuse to buy consumer units from the carrier besides a few other reason I wont go into. My theory is simple we want to mess with device buy an unlockable one or be ready to suffer/wait for an exploit after an OTA hits.
As far as root moving forward what process you talking about tho? There is 2 ways to do it. The one posted right above your post in this thread, or the link I posted above. If the info in this thread was used yes there may be an issue because of the patch. However I will be very surprised to see ppl not be able to keep root if they updated using the process in the link I posted above. Besides having to fastboot the boot.img to recovery in that process its the same way original Droid Razr owners had to update to be able to keep root if there was no root process for the OTA being pushed. Moving forward my guess is there will be an issue once 4.3 hits tho. I'm not sure you will be able to use the old kernel from 4.2.2 to overwrite recovery and boot the 4.3 /system so you can restore root and pull the actual 4.3 boot.img so that can be used for the recovery highjack. Bottom line is only time will tell at this point as you never know what Moto/Google will do with the next update.
Agreed on SS for backups even if not flashing ROMs, but personally i just dont mess with my device enough to worry about a full back i guess. For apps/settings I just use MyBackup PRO. I've also have an app a buddy made that creates a full XML if i wanted to use it. In the old days I use to make alot of backups for ROM flashing when I used SS. Guess in my old age I've just got lazy and dont worry about it that much anymore. I really hose the device I'll just swap to one of my others til i get back to fixing the messed up one.
Click to expand...
Click to collapse
3 ways to maintain root are the one in the thread, SS, and the one you posted. The one you posted actually allows you to flash the original stock firmware on the phone because the BL was never touched thus the security (keeping you from downgrading) was never installed. That was what I was referring to when I said those that must make sure they will retain root in the future would not have done the install pwnmymmoto without running then take ota then run pwnmymoto. As you said those people will be screwed if the next root requires you to flash back to original stock or use part of the pwnmymoto exploit that will only be accessible to those that got the OTA with SS or the link you posted. I don't toy with my phone as much as I used to especially this one, but bypasing exchange security is pretty essential for me. I don't want an encrypted device with mandatory pin. I never lose my phone and I would know within minutes of losing it if i ever did so I could shut it down remotely.
And I'm not sure about the new kernel situation either. This is why I wanted to make sure I could go back to original firmware as I see that being our best bet to retain root through 4.3, assuming jcase doesn't release another exploit for it to get some cash.

jayboyyyy said:
3 ways to maintain root are the one in the thread, SS, and the one you posted. The one you posted actually allows you to flash the original stock firmware on the phone because the BL was never touched thus the security (keeping you from downgrading) was never installed. That was what I was referring to when I said those that must make sure they will retain root in the future would not have done the install pwnmymmoto without running then take ota then run pwnmymoto. As you said those people will be screwed if the next root requires you to flash back to original stock or use part of the pwnmymoto exploit that will only be accessible to those that got the OTA with SS or the link you posted. I don't toy with my phone as much as I used to especially this one, but bypasing exchange security is pretty essential for me. I don't want an encrypted device with mandatory pin. I never lose my phone and I would know within minutes of losing it if i ever did so I could shut it down remotely.
And I'm not sure about the new kernel situation either. This is why I wanted to make sure I could go back to original firmware as I see that being our best bet to retain root through 4.3, assuming jcase doesn't release another exploit for it to get some cash.
Click to expand...
Click to collapse
Gotchya, makes total sense now what you are saying. I think there is just confusion at times when talking about root & OTA because of different ways to do it in a case like this device. Being a Moto guy for so long tho i'm use to all the BS they throw at us.....lol. That said that is why i posted the link I did. Imho it's a bad plan to update using the other method of installing pwnmymoto and not running it first before taking the OTA. Doing the process to protect root before updating is a much safer bet atm imo. Sure its a little more work but at the end of the day you dont have to be worried as much moving forward. Only concern I have still for doing it the longer way is if that process will work when they push out 4.3. It had alot of changes in it so lord only knows what will be up for keeping root. And really in my case its no concern but for all the folks with consumer version it is still a concern i think for the time being

Updating after root

Forgive me if this has been asked before. I did search, but I couldn't seem to find an answer to this.
I have a dev edition model. I really want to root, but have been holding off because there are bugs with the current build of Lollipop and I'm kind of hoping Moto will release a 5.02 update soon to kill the memory leak and other issues. That being said, I have really been itching for root.
If I did root, what would I have to do to this phone to update it to the new version? Would I have to completely return to stock and wipe? Or could I ADB sideload? Seems like I was reading that you can't update at all when you're rooted, even if you disable root.
Without any idea how much longer it'll be before the next update, I'm finding it harder and harder to hold off on root, but I don't want to go through hell to get it back to stock and update it.
Thanks for any help and sorry if this has already been asked.

From what I understand, root is fine. It is installing a custom recovery that will stop you from getting the OTA. You can very easily undo root. As a matter if fact, you can pretty easily reinstall the stock recovery also.

diggitydogg said:
From what I understand, root is fine. It is installing a custom recovery that will stop you from getting the OTA. You can very easily undo root. As a matter if fact, you can pretty easily reinstall the stock recovery also.
Click to expand...
Click to collapse
Thanks for the reply.
Most of the time, that's true. I have updated a lot of phones by simply unrooting, applying the update, and rooting again, or using ADB sideload and then just rooting. But from what I have been reading about the Moto X 2014, you have to completely restore it back to stock before doing anything, even if you just use the temp boot method to root.
Is that wrong? I can't seem to find any info that confirms either way.

I've installed custom recovery, how can I reverse it and install the original recovery for update?

One advantage of root is you'll have Titanium Backup, so even if you do have to do a full wipe before applying the update, you could just update it and restore everything back quickly using TiBu. With lollipop, apparently the update file checks for the entire system checksum as a whole instead of each file so any slight modification to the system will mostly require pure stock and this is the same even with the nexus. So yeah, you most likely have to wipe your device before updating. I'd say, wait till Xposed for Lollipop is out, its almost there, once it comes out go ahead and root it, it'll at least be worth the hassle then

If you're rooted with lollipop and want to take an OTA update you can flash stock recovery and the stock system image. At that point you should still have all apps/data and be able to take a OTA update. The recovery and system files should be the exact version you already have and of course anytime you flash realize you could lose data!

Steve-x said:
If you're rooted with lollipop and want to take an OTA update you can flash stock recovery and the stock system image. At that point you should still have all apps/data and be able to take a OTA update. The recovery and system files should be the exact version you already have and of course anytime you flash realize you could lose data!
Click to expand...
Click to collapse
Right. All you need to do is flash the stock /system partition and also the recovery if you replaced it. I don't know why everyone's talking about having to wipe the entire phone with the all the stock images.

[Q] Lollipop OTA question

I recently upgraded my phone to an AT&T S5 (I decided I didn't like the S6 specs). Currently, the phone is 100% stock, unrooted. I know that previous Samsung phones had problems with OTA updates when they were rooted. Now, with the possibility that the Lollipop OTA is coming soon, I'm hesitant to root until the OTA comes out. Here are my questions:
1. Should I wait to root until after the OTA hits the streets, or is there a strategy to root and still safely apply the OTA?
2. I don't want to be one of the first to get the OTA since it may be buggy. Is there a way to delay the OTA if I'm not rooted?

So, nobody has any thoughts about this?

I can't tell you what you should do but I can tell you what I would do. I would root now, load Titanium backup, and wait for 5.0 to come out. With TBU I freeze the OTA so it's not pushed without my permission. Additionally TBU will backup everything going forward so I can easily move up and restore my apps.
I believe the current process to root will work so be patient.

woody1 said:
So, nobody has any thoughts about this?
Click to expand...
Click to collapse
I wouldn't even take the OTA. Lots of issues with it. I am pretty sure LP will be the same.
I rooted mine, installed SafeStrap, and installed the XDK ROM, which eliminates all updates. My phone works great, does everything I want it to. Don't need problematic upgrades to downgrade my system.

cmerlyn said:
I wouldn't even take the OTA. Lots of issues with it. I am pretty sure LP will be the same.
I rooted mine, installed SafeStrap, and installed the XDK ROM, which eliminates all updates. My phone works great, does everything I want it to. Don't need problematic upgrades to downgrade my system.
Click to expand...
Click to collapse
Thanks to both of you for your suggestions. I think I'm going to go ahead and root and stay on the stock rom for a while. If the OTA shows up soon and looks worthwhile, I'll give it a try. Otherwise, I'll install SafeStrap and try a custom ROM.

Sure. Here's an easy answer: if you search for S5 AT&T and lolipop, you'll find lots of things that will say that AT&T will be taking its SWEET time putting an ota upgrade for lolipop out.
It is available from Samsung thru Kies, and I think I am personally going to take a new rom, and try and upgrade and unlock this piece of junque (and I upgraded from a Galaxy SII! )
Sigh

question about maintaining root

So far I've been running my OP3T with stock rom with TWRP recovery and SuperSU to have root. This was mostly because I wanted the Adaway and titanium backup to work. I undid everything so I could update to the latest OxygenOS version, and now I'm on the stock recovery too, but with bootloader still unlocked I believe. I no longer have root after doing the upgrade as far as I can tell, still a bit new to all this flashing, haha. The last time I did this was when the nexus 4 came out
What is the best option for maintaining root while still being able to upgrade smoothly? I'm not against using one of the custom ROMs if that will help, but I do kinda like the stock rom so far!
thanks!

bluesrph said:
So far I've been running my OP3T with stock rom with TWRP recovery and SuperSU to have root. This was mostly because I wanted the Adaway and titanium backup to work. I undid everything so I could update to the latest OxygenOS version, and now I'm on the stock recovery too, but with bootloader still unlocked I believe. I no longer have root after doing the upgrade as far as I can tell, still a bit new to all this flashing, haha. The last time I did this was when the nexus 4 came out
What is the best option for maintaining root while still being able to upgrade smoothly? I'm not against using one of the custom ROMs if that will help, but I do kinda like the stock rom so far!
thanks!
Click to expand...
Click to collapse
This thread should answer all your questions and doubts
https://forums.oneplus.net/threads/...-or-custom-recovery-without-data-loss.479265/

saurabh40629 said:
This thread should answer all your questions and doubts
https://forums.oneplus.net/threads/...-or-custom-recovery-without-data-loss.479265/
Click to expand...
Click to collapse
Thank you, I have seen that post. I'm guessing any route I go I'll have to flash updates then? I was hoping to find a way to be able to use OTA updates.
I've also never been able to get rid of the dm-verity error, even after going back to stock and locking the bootloader. Is there anything I need to worry about with that or is it just an annoyance?
Sent from my OnePlus3T using XDA Labs

bluesrph said:
Thank you, I have seen that post. I'm guessing any route I go I'll have to flash updates then? I was hoping to find a way to be able to use OTA updates.
I've also never been able to get rid of the dm-verity error, even after going back to stock and locking the bootloader. Is there anything I need to worry about with that or is it just an annoyance?
Click to expand...
Click to collapse
Dm-verity u can bypass but bootloader one, you can not. Look at the apps, mods section.

bluesrph said:
Thank you, I have seen that post. I'm guessing any route I go I'll have to flash updates then? I was hoping to find a way to be able to use OTA updates.
I've also never been able to get rid of the dm-verity error, even after going back to stock and locking the bootloader. Is there anything I need to worry about with that or is it just an annoyance?
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
You shouldn't try to flash the partial OTAs while you are rooted and have a custom recovery installed. The partial zip will try to make specific changes in the restricted partitions (/system, /boot, /recovery, etc.) related to the update and prior modifications to these files may cause the update to fail and the phone to brick. You can still use the "Update" tab in the Settings menu to download the update though as OOS will detect root and download the full zip of the update for you. Simply flash the full zip in TWRP, wipe cache/dalvik, then flash SuperSU and you're good to go the next time an update rolls out. Updating by this method (rooting immedately after flashing update) will also prevent OOS from replacing TWRP with the stock recovery again. When you download the update, you'll know if it's the full zip if the file is >1 GB (they're usually ~1.4 GB,, whereas the partial zips are a few hundred MB).
Unlocked bootloader warning screen is cannot be removed without relocked and fully resetting (wiping) the phone. DM-verity warning screen can be removed by following this guide. Make sure that you are flashing the correct firmware for you current version of OOS though, flashing the wrong version can brick you phone.

Can a rooted phone be updated?

Can a rooted phone be updated? If i root my razor, will i be able to update without re-rooting?

ChronosTrigger said:
Can a rooted phone be updated? If i root my razor, will i be able to update without re-rooting?
Click to expand...
Click to collapse
No, it fails to install. You need to reflash the stock boot image to take an OTA.

Confused still
CurtisMJ said:
No, it fails to install. You need to reflash the stock boot image to take an OTA.
Click to expand...
Click to collapse
I'm Sorry i'm so nooby in this regard.
So do you mean i have to basically get the stock ROM back again.
Then I can re-root like i did with the earlier version?

ChronosTrigger said:
I'm Sorry i'm so nooby in this regard.
So do you mean i have to basically get the stock ROM back again.
Then I can re-root like i did with the earlier version?
Click to expand...
Click to collapse
Yes. Razer's update engine doesn't seem to have the option to download full images like some other OEMs, so only fully stock ROM can be upgraded.
On that note, Razer seems to have set a week as the delay for releasing factory images, so if you want to keep root you might want to wait after an OTA, though we may be able to reproduce a slot earlier if someone captures the OTA package (but it's not as verifiable of course)

CurtisMJ said:
Yes. Razer's update engine doesn't seem to have the option to download full images like some other OEMs, so only fully stock ROM can be upgraded.
On that note, Razer seems to have set a week as the delay for releasing factory images, so if you want to keep root you might want to wait after an OTA, though we may be able to reproduce a slot earlier if someone captures the OTA package (but it's not as verifiable of course)
Click to expand...
Click to collapse
WARNING: This file is really intended for a developer to use in making a rooted slot. Flashing the file below could? remove root or cause other issues if you're rooted. Brick maybe? Although, mostly likely, it won't flash at all if you are rooted.
I used adb to capture the Razer Phone 2 MR2 OTA. It's located here.
I also downloaded it... but figure y'all would prefer a link straight to the Google source
SHA1 is the file name so you can verify it. E9F494FACBF8B7A6DF32F342C84459A7051ACE24
The SHA256 I calculated was: FF571E225BC81C8D450964E0C7BA28DF13E963798F9E5AF7E7C142DE7FBE51A5

translucentfocus said:
WARNING: Flashing the file below could? remove root or cause other issues if you're rooted. Brick maybe? I'm not rooted, just trying to help people get the files they need.
I used adb to capture the OTA. It's located here.
I also downloaded it... but figure y'all would prefer a link straight to the Google source
SHA1 is the file name so you can verify it. E9F494FACBF8B7A6DF32F342C84459A7051ACE24
The SHA256 I calculated was: FF571E225BC81C8D450964E0C7BA28DF13E963798F9E5AF7E7C142DE7FBE51A5
Click to expand...
Click to collapse
So With this. You can root, AND if they have any Update for the phone in the future, I can Update it without losing my root?

ChronosTrigger said:
So With this. You can root, AND if they have any Update for the phone in the future, I can Update it without losing my root?
Click to expand...
Click to collapse
Not quite... The update will likely fail to apply due to checksum failures. If it did go through it would probably brick the kernel so that's a good thing. Sorry, there's not really a way to automatically root after official OTAs as they update block by block between two known states, and neither is rooted. It's just sort of not possible, by design. You have to unroot, update and root again.
The OTA package translucentfocus has provided allows us to reproduce a single slot before the week's wait for the factory image so we can root sooner.

translucentfocus said:
WARNING: Flashing the file below could? remove root or cause other issues if you're rooted. Brick maybe? I'm not rooted, just trying to help people get the files they need.
I used adb to capture the OTA. It's located here.
I also downloaded it... but figure y'all would prefer a link straight to the Google source
SHA1 is the file name so you can verify it. E9F494FACBF8B7A6DF32F342C84459A7051ACE24
The SHA256 I calculated was: FF571E225BC81C8D450964E0C7BA28DF13E963798F9E5AF7E7C142DE7FBE51A5
Click to expand...
Click to collapse
which OTA is this? Also how to update

xterminater07 said:
which OTA is this? Also how to update
Click to expand...
Click to collapse
Sorry, I didn't specify. It's the MR2 update for the Razer Phone 2. Original reply has been also updated with version information in bold.
How to update? Actually, I posted the OTA because it's really for someone to make a slot with root before Razer releases the Factory MR2 Images--as @CurtisMJ mentioned previously.

CurtisMJ said:
Yes. Razer's update engine doesn't seem to have the option to download full images like some other OEMs, so only fully stock ROM can be upgraded.
On that note, Razer seems to have set a week as the delay for releasing factory images, so if you want to keep root you might want to wait after an OTA, though we may be able to reproduce a slot earlier if someone captures the OTA package (but it's not as verifiable of course)
Click to expand...
Click to collapse
Sorry to bring back an old thread but just a few questions if you don't mind.
I just bought a used Razer 2 seems like the user rooted it (I was unaware) and it has been years since I rooted anything. I downloaded root checker and it said I was rooted. I assume I'm running the stock rom, though magisk manager was installed on the phone when I turned it on so I guess it's not stock. I guess this means I can not take any OTA or it could brick? I went into system update and it still checked to make sure I was up to date so maybe OTA isn't disabled? So much has changed with apps and rooting since I messed with it that I don't know enough and I don't want to brick or bootloop the device.
Thanks

Univsoldur said:
Sorry to bring back an old thread but just a few questions if you don't mind.
I just bought a used Razer 2 seems like the user rooted it (I was unaware) and it has been years since I rooted anything. I downloaded root checker and it said I was rooted. I assume I'm running the stock rom, though magisk manager was installed on the phone when I turned it on so I guess it's not stock. I guess this means I can not take any OTA or it could brick? I went into system update and it still checked to make sure I was up to date so maybe OTA isn't disabled? So much has changed with apps and rooting since I messed with it that I don't know enough and I don't want to brick or bootloop the device.
Thanks
Click to expand...
Click to collapse
Yes, that sounds about right. When rooted the OTA function doesn't disable right away. Only after its downloaded an update and actually tries to apply it it'll refuse. The new Android update engine is pretty good at not bricking. My guess is probably stock. If it's rooted, then the bootloader is unlocked, and it's not too bad. For magisk root at least all you need to do is flash the stock boot image and the OTA will apply. With factory images around and an unlocked bootloader you'll have a hard time bricking it. Just don't untick "OEM Unlocking" in developer options. Ever. (Or at least until you've fully restored stock firmware. It's supposed to be disabled so you can't make that mistake but Magisk hide tricks the firmware into believing the bootloader is locked so it's enabled. Whaddayagonnado)

CurtisMJ said:
Yes. Razer's update engine doesn't seem to have the option to download full images like some other OEMs, so only fully stock ROM can be upgraded.
On that note, Razer seems to have set a week as the delay for releasing factory images, so if you want to keep root you might want to wait after an OTA, though we may be able to reproduce a slot earlier if someone captures the OTA package (but it's not as verifiable of course)
Click to expand...
Click to collapse
CurtisMJ said:
Yes, that sounds about right. When rooted the OTA function doesn't disable right away. Only after its downloaded an update and actually tries to apply it it'll refuse. The new Android update engine is pretty good at not bricking. My guess is probably stock. If it's rooted, then the bootloader is unlocked, and it's not too bad. For magisk root at least all you need to do is flash the stock boot image and the OTA will apply. With factory images around and an unlocked bootloader you'll have a hard time bricking it. Just don't untick "OEM Unlocking" in developer options. Ever. (Or at least until you've fully restored stock firmware. It's supposed to be disabled so you can't make that mistake but Magisk hide tricks the firmware into believing the bootloader is locked so it's enabled. Whaddayagonnado)
Click to expand...
Click to collapse
Thanks for the detailed response I managed to get up with the previous owner on swappa last night. He told me he unlocked the phone but never actually got around to rooting it. He also said it is running stock and the reason magisk is still on the phone after a wipe is because magisk persists after a wipe.
Messages from him.
Sorry about that, I did unlock the bootloader but I never actually got around to rooting. I usually relock the bootloader before I sell it but I completely forgot. You can apply an ota because I never installed a custom recovery, something else I didn't get around to doing. You can easily relock the bootloader using adb. If you need help with this let me know and I can walk you through it. But the bootloader being unlocked has zero effect on ota's. You are all good to go as far as that goes.
Oh no you're absolutely fine with an ota. I just looked it up and you're absolutely right, magisk does survive a reboot now. Since I didn't load a custom recovery though an ota will install just fine. Although when an ota does install though it will most likely remove magisk because it will write over the boot.img with the factory one. Here is the link to the factory images. It includes instructions on how to install it. But honestly a new ota should be released any time now since the last one I think was November. Once that installs you will be completely back to stock.
Does this sound accurate to y'all. Thanks again

@Univsoldur His knowledge seems a little dated. Kind of how mine was a few months ago Anyways here goes:
If a root checker says it's rooted then it probably is. I'm not sure why he says it isn't.
Magisk does indeed persist through a data wipe. I wasn't aware magiskinit could unpack the manager APK though. Neat
He's right in that an unlocked bootloader won't affect OTAs, but having magisk installed will.
The RP2 uses the new A/B update scheme. In this case it doesn't matter whether a custom recovery was ever installed. Recovery mode is not used during the process of installation. Unfortunately the new update scheme is also heavily based on deltas, even on the kernel image, so OTAs will be broken as it won't be able to retrieve a full kernel image from the OTA servers. Some OEMs' ROMs can do that, but Razer's can't. You can flash the factory images if you truly want a clean start, but to fix OTAs and remove magisk, reflashing just the kernel image with one from the factory image should be sufficient. The magisk uninstaller won't work due to the data wipe so that's probably the only option.

CurtisMJ said:
@Univsoldur His knowledge seems a little dated. Kind of how mine was a few months ago Anyways here goes:
If a root checker says it's rooted then it probably is. I'm not sure why he says it isn't.
Magisk does indeed persist through a data wipe. I wasn't aware magiskinit could unpack the manager APK though. Neat
He's right in that an unlocked bootloader won't affect OTAs, but having magisk installed will.
The RP2 uses the new A/B update scheme. In this case it doesn't matter whether a custom recovery was ever installed. Recovery mode is not used during the process of installation. Unfortunately the new update scheme is also heavily based on deltas, even on the kernel image, so OTAs will be broken as it won't be able to retrieve a full kernel image from the OTA servers. Some OEMs' ROMs can do that, but Razer's can't. You can flash the factory images if you truly want a clean start, but to fix OTAs and remove magisk, reflashing just the kernel image with one from the factory image should be sufficient. The magisk uninstaller won't work due to the data wipe so that's probably the only option.
Click to expand...
Click to collapse
So you think to get it back to stock I could just go here.
https://developer.razer.com/razer-phone-dev-tools/factory-images/
Will that remove magisk and return it back to stock I would assume there is no threat of flashing the stock image. Besides that do I need to mess with the kernel?

I'm wondering if it would be possible to flash the unlocked Razer phone 2 firmware to the AT&T version. Would the bootloader need to be unlocked?

Univsoldur said:
So you think to get it back to stock I could just go here.
https://developer.razer.com/razer-phone-dev-tools/factory-images/
Will that remove magisk and return it back to stock I would assume there is no threat of flashing the stock image. Besides that do I need to mess with the kernel?
Click to expand...
Click to collapse
Yes, that will return it to stock and remove Magisk. No, if you flash the factory image you don't need to do anything further with the kernel.
---------- Post added at 11:14 PM ---------- Previous post was at 11:11 PM ----------
DrGonzo6o said:
I'm wondering if it would be possible to flash the unlocked Razer phone 2 firmware to the AT&T version. Would the bootloader need to be unlocked?
Click to expand...
Click to collapse
The bootloader needs to be unlocked, yes. I had the unlocked one from the start, so I can't comment on how well that will work though.
Has anyone with an AT&T version successfully flashed unlocked firmware?

Univsoldur said:
So you think to get it back to stock I could just go here.
https://developer.razer.com/razer-phone-dev-tools/factory-images/
Will that remove magisk and return it back to stock I would assume there is no threat of flashing the stock image. Besides that do I need to mess with the kernel?
Click to expand...
Click to collapse
I did post a full unroot guide...