Black screen after trying to root - Liquid S100 General

UPDATE2: Have got it to work now again. But getting it into bootloader by pressing buttons seems to work a little bad, atleast for me. Had to try many times for it to work finaly.
UPDATE: Have manage to get it into bootload after many tries... not working so well...
Ill maby manage to get it back on track now...
Made the misstake of not reading the comments on unlockr how to root the liquid. So i got the black screen problem. When i start i get the acer and android loading screens but after that it just goes black.
But other ppl seem to be able to boot the phone in recovery mode and get to it trought the usb cable. But when i boot i get this on the screen:
Partition checksum
splash1:chksum =8ba9da08 OK
boot:chksum=338dd7f1 !=001ed108 **fail**
recovery:chksum=2b8b7b4b !=00216b18 **fail**
system:chksum =f599c9d0 OK
========
<<FAIL>>
And i cant do anything. What should i do?

I read some old posts in MoDaCo, I think you tried to boot into recovery with USB connected. Disconnect the USB and try it again (Remove and reinsert battery, Pwr+Camera+Volume-, 2-3 vibrations, release, power phone on as if you are turning it on)

Yep, normally this message appear when the USB cable is plugged-in.

HustlinDaily said:
I read some old posts in MoDaCo, I think you tried to boot into recovery with USB connected. Disconnect the USB and try it again (Remove and reinsert battery, Pwr+Camera+Volume-, 2-3 vibrations, release, power phone on as if you are turning it on)
Click to expand...
Click to collapse
Did that to get into bootloader but it didnt work so well for me... but finaly i got it into bootloader with some strange button pushing and battery inserts/removals
But ive got it to work again so its all good now

Related

[Q] Samsung Galaxy S Boot Problem

I have a problem with my galaxy. It can't boot stuck on first white logo Galaxy S GT-I9000. I have do anything (volume + & center button, volume - & center button.... all combination!)
Is there any solution for this please?
The problem is exactly the same with this video: on youtube search for "Samsung Galaxy S Boot Problem"
Thanks a lot.
Nothing? please help!
I have the same issue. Tempted to try the home made jig but if there is a way without then ill try that first.
Ive tried:
Booting with various button combos.
button combos then installing battery.
combos with 3 flashes
.....
the list goes on.
My phone would happily go into download mode previously but not into OS. So I tried flashing 2.2 jp1 and it went how it is now. Odin said successful too
Hi Theodore+
I tried the jig and it worked a charm. Def recommend giving it a go.
Hi..
i'm having a weird problem..
well i upgraded to froyo 2 weeks ago using the registration trick and it was ok till yesterday.
my phone turned off suddently (while i had 60% left from battery), couldn't turn it on again.
cannot go to recovery mode, but can go to download mode.
the thing is i could boot my phone once i plug the usb to the computer or once i plug the charger..
so my phone cannot boot without being plugged
does anyone know anything about it?
Cheers..
Try pluggin in a external microSD.
Than boot and see if anything different.
Sorry xxgg but i didn't get what you're trying to tell me...
i have a microSD it's always there... how to pluggin in a microSD?
the thing is when i try to turn on my unplugged phone i see an empty battery..
once i plug it i turn it on normally..
thanks.

[Q] Stuck in AT&T Screen boot loop, can't get into either recovery or download mode

[Q] Stuck in AT&T Screen boot loop, can't get into either recovery or download mode
I went back to stock (or tried to) and after Odin was done the phone just stuck in the AT&T boot loop, download mode is not working (it was working before so I know I am doing the right combination/timing) doing endless combinations of Vol-/Vol+/Power doesn't seem to get me into recovery mode-
I put my girlfriend's captivate on Continuum over the weekend so I'm sure I'm pressing the right keys to get into download mode, but I get nothing but the battery.
I do have the Android SDK in my computer but I'm never able to get past that naggy screen, so I can't do a 'adb shell reboot recovery' is a JIG my only option?
To recap, can't get into download mode and pressing volume up / volume down and power buttonuntil the AT&T screen and then release the power button doesn't get me into recovery mode.
Need help!
I've been in the exact same situation.A jig is most probably the only option.
Many people have had this problem and find that a jig is the answer.
Sent from my cappy UC'd 900mhz and UV'd running di11is rom/ Onix kernel
first try with just holding vol buttons and then inserting USB cable...hold vol buttons till its goes into download mode or the screen changes..if not then try following steps...
1. remove the usb cable, battery, sdcard, SIM.
2. wait 10 seconds, then insert the USB cable.
3. press and hold the 3 button combo while you insert the battery
4. continue to hold until phone's screen goes black twice and release power button.
5. timing is critical, it may not work the first time. Keep going until you see the COM port is connected properly.
still no Dl mode..then buy a jig or make one yourself
Right so I'm download mode now, but every time I go back to STOCK I'm re-stuck in the same loop, seems that I can't get out of it.
I got into download mode with a JIG, but still can't see my phone from my computer, so I can't run the adb shell to get it to boot in recovery mode
I'd appreciate any help you could give me!
leopic said:
Right so I'm download mode now, but every time I go back to STOCK I'm re-stuck in the same loop, seems that I can't get out of it.
I got into download mode with a JIG, but still can't see my phone from my computer, so I can't run the adb shell to get it to boot in recovery mode
I'd appreciate any help you could give me!
Click to expand...
Click to collapse
Restart your computer, use a different usb cable, a different usb port. if that doesn't work, unistall the drivers and reinstall, restart your comp and try again.
For anoyone that might find this thread, Odin 1 Click didn't work for me, so I flash back into stock using Odin (not the 1 click version, another one), here are some links that proved to be very helpful (I ended up Flashing to Serependity 6.4):
http://forum.xda-developers.com/showthread.php?t=1031749
http://www.youtube.com/watch?v=Rdn5GoRjhn0
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
http://forum.xda-developers.com/showthread.php?t=884364
http://forum.xda-developers.com/showthread.php?t=919816
http://android-roms.info/roms/80-Serendipity
http://serendipityrom.weebly.com/download.html
I had the same problem just a few weeks ago.
The problem is once you start using 2.2 you can't use ODIN 2.1 anymore.
This is the one that worked for me I897UCJI6-OCD-REV02-Low-designgears(1)
Frawgg said:
I had the same problem just a few weeks ago.
The problem is once you start using 2.2 you can't use ODIN 2.1 anymore.
This is the one that worked for me I897UCJI6-OCD-REV02-Low-designgears(1)
Click to expand...
Click to collapse
this is actually a false statement.
i can still use odin 2.1 after flashing 2.2 roms and even stock 2.2 upgrades
Anyone thought about trying Heimdall if Odin doesn't work?
Yes, i tried using heimdall and that didn't work. I'm wondering what leopic did to fix his, if you could list the steps instead of the links that would help a lot!
stuck in att screen and battery loop
so i have tried searching for threads that match the issue i am having and some of them do and some doent so i have decided to post this. i tried flashing back to stock from a custom rom i was using. i used Odin to do this. i didn't work so i tried it again, same result. it dosent boot just sits at the captivate splash screen. i tried using a different oden tool and after that it just loops through the ATT splash screen and if i have the usb cable plugged in, it just loops the battery screen. im not even sure if it charges. i have tried everything i can find to do to get the download mode to come up and nothing, just loops. i have not tried the jig on this phone yet b/c i haven't made it to radio shack yet to pick the resistors up. is that going to be my only option?
what rom WERE you on?was it cm7 or miui?
Connection Issues? < click here for information on download and recovery mode....
information you should have had BEFORE FLASHING your phone..
i was on serinity 6.2.
i have tried all possible ways to get into d/l mode that i have found
so from the link provided
FROM A POWERED-DOWN STATE - BATTERY REMOVED
- Insert battery, then press and hold Vol+ and Vol-, then insert your USB cable..
goes into battery loop
- Press and hold Vol+/Vol-, Insert Battery, Insert USB cable
goes into battery loop
- Press and hold Vol+/Vol-, Insert USB cable, Insert Battery
goes into battery loop
- Use a 301Kohm jig between USB pins 4-5 (can be manufactured jig or homemade chain of resistors)
have not tried yet
asorendo said:
so from the link provided
FROM A POWERED-DOWN STATE - BATTERY REMOVED
- Insert battery, then press and hold Vol+ and Vol-, then insert your USB cable..
goes into battery loop
- Press and hold Vol+/Vol-, Insert Battery, Insert USB cable
goes into battery loop
- Press and hold Vol+/Vol-, Insert USB cable, Insert Battery
goes into battery loop
- Use a 301Kohm jig between USB pins 4-5 (can be manufactured jig or homemade chain of resistors)
have not tried yet
Click to expand...
Click to collapse
Sounds like a jig is in your future.
YAY. i got the resistors hook it all up and download mode loaded up. AWESOME!!!
viny2cool said:
first try with just holding vol buttons and then inserting USB cable...hold vol buttons till its goes into download mode or the screen changes..if not then try following steps...
1. remove the usb cable, battery, sdcard, SIM.
2. wait 10 seconds, then insert the USB cable.
3. press and hold the 3 button combo while you insert the battery
4. continue to hold until phone's screen goes black twice and release power button.
5. timing is critical, it may not work the first time. Keep going until you see the COM port is connected properly.
still no Dl mode..then buy a jig or make one yourself
Click to expand...
Click to collapse
You safe my Note.. Many Thanks
I thought I lost her x_x
I had this problem before
Users - I am new on this forum and I know this thread is old however I had this problem and it resolved itself. Here is how.
Background: I tried to charge my ATT Captivate using a Nokia microUSB charger that was plugged into a 120v outlet. After a few minutes of charging, the phone would no longer boot past the ATT World Phone screen. Afterwards I tried everything under sun to get a computer recognize the phone so I could reflash the ROM. Nothing worked (different computer, different USB cables, reinstalled the Samsung drivers, etc....).
Resolution of Problem: As a last ditch effort, I tried charging my phone with the same Nokia microUSB cable that appeared to cause the problem in the first placed. This time the Nokia USB cable was plugged into my computer instead of the 120v outlet. My computer had the Samsung phone drivers installed. To my amazement the phone booted up after I unplugged it from the USB cable and all is well.
I am not sure what happened but my Captivate is back with no damage. Hope this helps some poor soul who is trying desperatley to get a computer to recognize a phone that for no apparent reason will not be recognized.
Captivate not working after flashing CM10 nightly
HELP, Actually I rooted my SAMSUNG CAPTIVATE I897 and then tried to install CM10 nightly thorugh Clockwork mod recovery. And I forgot to wipe Dalvik cache. The phone got stuck in AT&T Screen for hours together, the phone was not at all responding i.e. neither to download mode or recovery mode. But yesterday the phone went into download mode .. i tried to install the stock rom for Samsung captivate. Its coming till galaxy S screen after that its switching off ... What is the possible solution. Pls Help with this as I am complete novice to this. Help will be appreciated :good:

[Q] Help Needed, Phone Bricked??

Hi,
Yesterday i installed this rom http://forum.xda-developers.com/show....php?t=2065863.
Everything looked ok, untill an BSOD.
I pulled battery and restarted.
After that the phoned booted normally, but keeps restarting ecery 30 sec,
I tried to acces Rommanager (Power on and volume buttons) but phone stays black.
After that i tried to Smrtflash it again. Power on and Vol- and the Software upgrading thing showed on the screen.
I started the tool, but it didnt recognize my phone.
Reinstalled the drivers, still my phone didnt get recognized.
I then tried Nvflash, power on and both volume buttons, screens thays black, but still it didnt get recognized.
I tried all of this on 2 desktopcomputers and on 1 laptop and with 2 usb cables , but nothing.
When i use the usb cables to load the battery, they work ( so cables are ok)
I really dont know what to do now to get my phone working.
Any Suggestions???
Thanks in advance
hoolie said:
Hi,
I really dont know what to do now to get my phone working.
Any Suggestions???
Thanks in advance
Click to expand...
Click to collapse
I tried this tool as well : http://forum.xda-developers.com/show....php?t=1975274
But i get the message : Usb device not recognized. ( when i look into device manager, phone isnt showed and no unknown devices are there)

[Q] O2X not detectable on PC and Cannot access to Recovery mode

Hi!
My phone is no longer detectable on my PC via USB (Win7 and Linux), with adb or nvflash with vol+ + vol- or vol- + power or anything.
This problem come from the last official stock update, like what, it's crazy. And no access to hidden menu, etc.
Then, after, trying to solve this problem by applying http://forum.xda-developers.com/showthread.php?t=1981359, by using Rom Manager to replace TWRP by CWM recovery (I know, it's very bad idea...), now my phone don't want to boot in recovery mode, I probably corrupt my system.
Now I have a brick, which can boot and display "S/W Upgrade Please wait while upgrading..." with vol down, but no usb IPX mode or adb or anything (to be sure, I try with another android phone, and work perfectly).
In normal boot, I have LG logo, then rom logo (an X in color), and no change, this animation continue but no end.
I had try many usb cable, reinstall lg drivers and nvidia drivers, different pc and os...
Can we restore recovery mode with special scheme, file, on a sdcard only by boot the phone?
I'm very interested in any ideas that can unlock me.
A big thank you to the community!
Alexandre
(Sorry for my bad english)
Have ya tried this on your phone?
http://forum.xda-developers.com/showthread.php?t=1975274
PS: I'm not very good at android thingies. Just a peep at your thread. Peace. :highfive:
androidpradeep said:
Have ya tried this on your phone?
http://forum.xda-developers.com/showthread.php?t=1975274
PS: I'm not very good at android thingies. Just a peep at your thread. Peace. :highfive:
Click to expand...
Click to collapse
Yes, this script only call nvflash with predefined parameters.
My phone is not detectable by nvflash or adb, that is why it doesn't work.
Peace. :highfive too
I had a weird brick with my 2x too, after flashing a wrong rom and it was not working at all
So I decided to remove the battery and use a spare one I had in my stuff, and the phone turned on, and when i turned it off again I could reuse nvflash to get back to stock
Did you try something like that, or only charrging the phone for a few hours to see if comes back ?
cristiano.orlando said:
I had a weird brick with my 2x too, after flashing a wrong rom and it was not working at all
So I decided to remove the battery and use a spare one I had in my stuff, and the phone turned on, and when i turned it off again I could reuse nvflash to get back to stock
Did you try something like that, or only charrging the phone for a few hours to see if comes back ?
Click to expand...
Click to collapse
I don't try another battery, but I have charging the phone with the official lg charger during 4 days, and nothing... This why I asked if we can boot or reconfigure with a "magic" sdcard...
Thanks,
Alexandre
coolDax said:
Hi!
My phone is no longer detectable on my PC via USB (Win7 and Linux), with adb or nvflash with vol+ + vol- or vol- + power or anything.
This problem come from the last official stock update, like what, it's crazy. And no access to hidden menu, etc.
Then, after, trying to solve this problem by applying http://forum.xda-developers.com/showthread.php?t=1981359, by using Rom Manager to replace TWRP by CWM recovery (I know, it's very bad idea...), now my phone don't want to boot in recovery mode, I probably corrupt my system.
Now I have a brick, which can boot and display "S/W Upgrade Please wait while upgrading..." with vol down, but no usb IPX mode or adb or anything (to be sure, I try with another android phone, and work perfectly).
In normal boot, I have LG logo, then rom logo (an X in color), and no change, this animation continue but no end.
I had try many usb cable, reinstall lg drivers and nvidia drivers, different pc and os...
Can we restore recovery mode with special scheme, file, on a sdcard only by boot the phone?
I'm very interested in any ideas that can unlock me.
A big thank you to the community!
Alexandre
(Sorry for my bad english)
Click to expand...
Click to collapse
Remove battery.
Press and hold volume- key.
Connect USB cable.
Still press volume- key.
Release when you see screen says "S/W" download.
Insert battery back.
If it worked use smartflash to flash a rom. If the screen still black, then you should try it on another pc. There is no way to screw up the nvflash mode with a bad flash or anything. Keep in mind that keys can be unresponsive during the years. It is realy hard to set my phone to nvflash mode since my volumkeys are unresponsive. I have to press them so hard that my phone nearly break in to half.
If it still not works change usb cable. Check the device manager for devices with a ! in a yellow triangle. If you see that you have some kind of driver issues. If all of these fails to revive your phone, then your phone is dead.
Sent from my LG-P990 using xda app-developers app
bitdomo said:
Remove battery.
Press and hold volume- key.
Connect USB cable.
Still press volume- key.
Release when you see screen says "S/W" download.
Insert battery back.
If it worked use smartflash to flash a rom. If the screen still black, then you should try it on another pc. There is no way to screw up the nvflash mode with a bad flash or anything. Keep in mind that keys can be unresponsive during the years. It is realy hard to set my phone to nvflash mode since my volumkeys are unresponsive. I have to press them so hard that my phone nearly break in to half.
If it still not works change usb cable. Check the device manager for devices with a ! in a yellow triangle. If you see that you have some kind of driver issues. If all of these fails to revive your phone, then your phone is dead.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Thank you!
unfortunately it doesn't work, try with a new pc and a new cable... no change. My usb slot in my p990 is probably dead. what is infuriating is the rest works well.
Did you use fast charge with any ROM ?
USB fast charge can damage the USB connector
Did you try using the method to check if the device connects to computer with nvflash, since it does not require battery ?
Try checking this and if the USB connection broke you can send your device to a repair shop to replace it, or even search ebay, aliexpress and etc to find spare parts, and if you do so, I recommed get an extra battery (non original batteries are cheap)
good luck
cristiano.orlando said:
Did you use fast charge with any ROM ?
USB fast charge can damage the USB connector
good luck
Click to expand...
Click to collapse
That is probably a myth.
Try to use a very short usb cable and use the ports on the backside of the pc ( not a laptop!), I always had problems with the front usb ports.
SO I really dunno what could possible made this device die
I nevr had big issues with mine like this, but the closest thing that hapenned when the device stopped working, and did not charge, was to put another battery and this helped
is someone selling this the whole USB flex hardware? I wanna buy it. I am from Philippines.

I need help lol after flashing in odin

Hi all, this is sadly my first thread in xda, sadly because two things: for being a help-ask thread and because the reason im posting it:
So i decided to flash the new ASIG firmware to my S10, and I don't know what went wrong because odin flashed all right. when i rebooted my device did the key combo to get into recovery mode but it didn't work. Can't pass from the first boot screen because it keeps rebooting
some info to feed your sugestions:
-i was rooted and running a custom rom (August securitypatch on BeyondRom)
-patched AP file in magisk
-ianmacd TWRP
I have tried to get it into download mode, recovery mode, normal OS, magisk boot.... nothing works it keeps rebooting. I remember the battery was like 60~70 % and have been like 7 hours and keeps rebooting.
Also i have tried to get it to boot in download mode waiting till screen goes black pressing voldown and bixby and catching the right moment to plug the cable in it and stops rebooting but doesn't boot either. If i press power button starts again rebooting and the same happen if i disconnect-reconnect or free-press any of the button combo even for one second...
so i have been tweaking my devices like 3 years and this is the first time i think i screwed up one, i always tought it was not possible (hope don't) but this time i think i made it
Do I? there is no fix?
i'm waiting to the phone gets fully discharged to see if powered off can i get it to boot into download mode and fla**** again
is there another way to get it to go into download mode? like old phones with the usb jig
it is a way to turn it off??
do you know what could be the reason to get in this state?
sorry for too much questions but i had a s7 edge before and i messed with it a lot, one day deactivated oem unlock, flashed wrong custom roms and broke it (software way) a lot of times and i always was able to get into download mode and fix it but this time i can't get it to work
so please help me and thanks for read and try to help (if anybody) lol r.r :crying::crying::crying:
FIXED
i'm happy to have been right, its hard to hard brick a device hehehe just after some minutes after (panic atack) post battery went out of energy pressed key combo comected cable to pc and booted un DM im sorprised because did not lost a byte of data
When the S9-S10 Starts bootlooping and won't go to DWNLD mode or Recovery, Just hold Power + Vol DWN + BIX for 5 seconds, release, repeat for ten seconds, release, Repeat,
After that the "upload mode" should appear. and you can just hold Power+Volume Down until the phone reboots. This time the keys will finally boot you into the desired mode...

Categories

Resources