I am planning to buy a Windfire but the thing that would make it stand up for me (instead of a BADA powered phone) is support for flash 10 from adobe. Here on forum there is a ported flash version for Android 2.1 here.
My worry is that the Wildfire does not have the steam to run in a reasonable way flash enabled sites. I've seen demos on Desire and flash was running ok. Did anyone tested it ?
Well, the stock flash does not play any videos. (There is a youtube app, but dailymotion and others I tested are not supported and won't play in the browser.)
I did try listening to an engadget (embedded flash) podcast, but it was waaaaay slower than preferrable and even lagged (i.e: every 1-2 secs, it seemingly stopped for 1/10th).
Again, this was with the stock flash. (I don't have the phone any more.)
It works on wildfire Rom ported for HTC Tattoo, with lesser hardware, so I'd imagine it'll be fine
Sent from my HTC Tattoo using XDA App
Flash 10.1 works
Hey you guys i just downloaded and tested flash for eclair and it works perfectly on the wildfire big ups to the guy who figured out how to recompile it for the android 2.1 version hey teach me how to search for these firmware specific files so i can recompile 10.1 for ps3! Rock on dude!:d:d:d:d
could someone please provide links to both - working proofed flash 10.1 for qvga with 2.2 and 2.1?
would kick ass...
b0ngokarl said:
could someone please provide links to both - working proofed flash 10.1 for qvga with 2.2 and 2.1?
would kick ass...
Click to expand...
Click to collapse
has nothing to do with the resolution, its about the processor.. and as far as I know it only works for armv7 processors wildfire have armv6
adeadrat said:
has nothing to do with the resolution, its about the processor.. and as far as I know it only works for armv7 processors wildfire have armv6
Click to expand...
Click to collapse
But Jacob stated that it works on the Tattoo and this has the same processor as the Wildfire?
Thanks mate!
calum3593 said:
Hey you guys i just downloaded and tested flash for eclair and it works perfectly on the wildfire big ups to the guy who figured out how to recompile it for the android 2.1 version hey teach me how to search for these firmware specific files so i can recompile 10.1 for ps3! Rock on dude!:d:d:d:d
Click to expand...
Click to collapse
Share with us ,Please!!!
Bump
Sent from my HTC Wildfire using XDA App
I always heard that was not possible...anyone knows about the tatto?
vadash said:
I always heard that was not possible...anyone knows about the tatto?
Click to expand...
Click to collapse
We used flash 10.1 ported for Sense on Android 2.1 on a Wildfire ROM which had been ported to Tattoo, which has the same CPU and resolution.
i have flash 10.x on 2.1 rom. will release a beta in a few so ppl can test
If it works on eclair and sense, would it be possible to port to froyo?
ben1066 said:
If it works on eclair and sense, would it be possible to port to froyo?
Click to expand...
Click to collapse
Should be, I was looking through the 2.2 ROM and it seems possible
I thought it wouldn't work due to the CPU
brilldoctor said:
I thought it wouldn't work due to the CPU
Click to expand...
Click to collapse
Hmm testing danne_jo's implementation and it's not working for me (on his 2.1 Sense ROM) :/
Related
The new HTC gratia has exactly the same specs as HTC legend.
its preloaded with the new HTC sense and froyo 2.2!
any one knows whether we can port that rom over to legend so we can finally have our 2.2?
ya pretty same.............
http://www.phonearena.com/phones/HTC-Gratia_id4975
FOLLOW ME http://smartsreenath.blogspot.com/
No question in dev section. Should be moved to general. Mod, we need you in action. Btw porting even with the same hardware is not as straight forward as you think.
I was just about to try and do this on my legend... but can't find a dump ;\
OzJD said:
I was just about to try and do this on my legend... but can't find a dump ;\
Click to expand...
Click to collapse
U can find it on the hero gsm thread.. I already ported it to the eris.. just a few issues.. wifi and camera.. other then that.. it flies for being a sense rom lol
tazzpatriot said:
U can find it on the hero gsm thread.. I already ported it to the eris.. just a few issues.. wifi and camera.. other then that.. it flies for being a sense rom lol
Click to expand...
Click to collapse
Here's it http://forum.xda-developers.com/showthread.php?t=817895
Edit: Tried dsixda's kitchen, boots fine on the Legend but the WIFI and SDIO drivers needs work
I also managed to create a bootable ROM with the xda kitchen and using the porting tools. Running really fast for Sense ROM. WiFi not working and SD card cannot be mounted. Getting the same performance as CM nighlies according to Linpack and Quadrant.
Ok here it goes... Does FM radio works? Now shoot me
so getting progress.....
FOLLOW ME http://smartsreenath.blogspot.com/
qzem said:
Ok here it goes... Does FM radio works? Now shoot me
Click to expand...
Click to collapse
Unfortunatelly FM Radio doesn't work properly...
krasenk said:
Unfortunatelly FM Radio doesn't work properly...
Click to expand...
Click to collapse
They are using a Broadcom chipset, if I'm not mistaken.
That one is incompatible to the TI radio used in the Legend.
ali ba said:
They are using a Broadcom chipset, if I'm not mistaken.
That one is incompatible to the TI radio used in the Legend.
Click to expand...
Click to collapse
Thanks for the tip
Tried porting this directly.. No touch-screen.. How did you guys manage to get it working??
whitetigerdk said:
Tried porting this directly.. No touch-screen.. How did you guys manage to get it working??
Click to expand...
Click to collapse
I used the porting tools in XDA kitchen and CM 6 nghtly 26.
krasenk said:
I used the porting tools in XDA kitchen and CM 6 nghtly 26.
Click to expand...
Click to collapse
Aah.. I used the boot-image from Stock Legend.. Will try to flash a CM kernel instead
whitetigerdk said:
Aah.. I used the boot-image from Stock Legend.. Will try to flash a CM kernel instead
Click to expand...
Click to collapse
Yes my ROM is booting fine with CM kernel. The major problem is that the SD card cannot be mounted. WiFi and FM radio are not so important at this point I think. I assume you're more experienced in cooking ROMs and could advise on this.
Cheers.
check this out..........
http://pdadb.net/index.php?m=pdacomparer&id1=2424&id2=2619&id3=2652&id4=2123
[ i know this nothing to do with this porting.....those people who love to compare mobiles]
FOLLOW ME http://smartsreenath.blogspot.com/
Anyone achieved any progress on this? Maybe the more experienced developers could provide some hints
Once SD Card and Wifi is working, I'll do a full root on my Legend for this. I never use the FM Radio so that doesn't bother me
Would be great to see this rom with a lot more languages.. Or to be able to implement them from the 2.1 roms..
Sent from my HTC Legend using XDA App
Hi there
Here are the much awaited dumps from the Nexus S, with Gingerbread.
Credits to <k0mpresd> on IRC #NSdev for the /system dump.
Credits to <kevin_teslacoil> on IRC #NSdev for the boot.img, recovery.img and modem dumps:
http://forum.xda-developers.com/showpost.php?p=9869067&postcount=38
/system dump as root (complete with symlinks):
http://www.multiupload.com/ZFK4133AL0
initramfs:
https://github.com/supercurio/nexuss_initramfs/tree/initramfs-from-leak
Kernel - complete boot image:
http://project-voodoo.org/downloads/nexus-s-dumps/mtdblock2_boot.img.gz
Kernel - zImage alone:
http://project-voodoo.org/downloads/nexus-s-dumps/mtdblock2_boot.img-kernel
Kernel - initramfs alone:
http://project-voodoo.org/downloads/nexus-s-dumps/mtdblock2_boot.img-ramdisk.gz
Recovery - complete image:
http://project-voodoo.org/downloads/nexus-s-dumps/mtdblock3_recovery.img.gz
Kernel - zImage alone:
http://project-voodoo.org/downloads/nexus-s-dumps/mtdblock3_recovery.img-kernel
Kernel - initramfs alone:
http://project-voodoo.org/downloads/nexus-s-dumps/mtdblock3_recovery.img-ramdisk.gz
Uploading a mirror of the good dump
supercurio said:
Uploading a mirror of the good dump
Click to expand...
Click to collapse
Good man ;-)
Apparently the cyanogen guys are working on porting this to the SGS before they continue with work on cyanogen itself, and then will upgrade to v7 cyanogen using the new AOSP base.
jaju123 said:
Apparently the cyanogen guys are working on porting this to the SGS before they continue with work on cyanogen itself, and then will upgrade to v7 cyanogen using the new AOSP base.
Click to expand...
Click to collapse
Where did you see this?
jaju123 said:
Apparently the cyanogen guys are working on porting this to the SGS before they continue with work on cyanogen itself, and then will upgrade to v7 cyanogen using the new AOSP base.
Click to expand...
Click to collapse
where did you get that info?
Nice! Hope we can get some roms soon!
OMG OMG!
My Captivate can't wait for the proper GB port!!
Funny how we'll prolly get gingerbread before froyo.
Samsumg + AT&T = what a beautiful combination of slowass and moronic with an extra serving of we-don't-give-a-f**k-about-our-existing-customers.
can i install it on my sgs?
Sent from my GT-I9000 using XDA App
Any chance for an HD2 Nexus rom soon?
KeeConceptz said:
Any chance for an HD2 Nexus rom soon?
Click to expand...
Click to collapse
Lol.
Thanks for this, I can use the images from this dump to improve my theme!
I'm hoping that since its almost identical to the Samsung Galaxy S series phones that it shouldnt be too hard to cook up a ROM for the SGS series phones.
Also, I hope the GPS works better than the SGS phones, maybe somebody can look at the source code and figure out a way to fix the GPS on the SGS phones once and for all!
Keeping my fingers crossed!
GPS
Given the hardware similarities between the Nexus S and other SGS models, I'm curious as to the GPS performance of the NS and if the devs will identify software based improvements that we can apply to our SGS phones specifically the Captivate.
jaju123 said:
Apparently the cyanogen guys are working on porting this to the SGS before they continue with work on cyanogen itself, and then will upgrade to v7 cyanogen using the new AOSP base.
Click to expand...
Click to collapse
Um...no, not at the moment. still waiting for source for froyo and hopefully some drivers...
dasunsrule32 said:
Um...no, not at the moment. still waiting for source for froyo and hopefully some drivers...
Click to expand...
Click to collapse
Screw froyo! We gots us some Gingerbreads!
jaju123 said:
Apparently the cyanogen guys are working on porting this to the SGS before they continue with work on cyanogen itself, and then will upgrade to v7 cyanogen using the new AOSP base.
Click to expand...
Click to collapse
Links or it didn't happen, broseph.
DarkDvr said:
Screw froyo! We gots us some Gingerbreads!
Click to expand...
Click to collapse
Yea, in all honesty, I'd rather Samsung stop working on Froyo and just give us Gingerbread on the Galaxy S phones. Why even bother putting out Froyo now?
And you know they wont update the Galaxy S phones to Gingerbread.
Here your requested link.
A link that appears to be an more comprehensive dump (with modem, recovery, userdata, bootloader, etc.) is here. But how to get at the contents?
Boaty said:
Here your requested link.
Click to expand...
Click to collapse
I think I just wet myself, figuratively. Between Team Douche, Supercurio, Eugene, Master, Team Whiskey, etc. etc. etc. etc. we WILL have a damn GB either built from AOSP or ported and I can see this being done fast.
I am going to be making some custom 2.1 ROMs and i have made this thread to show them. Please suggest what would be suitable and what would look nice.
reserved....
reserved......
Always i prefer improvement in performance
App2SD should be enabled by default
You need to have basic apps like Rootexplorer and SetCpu preinstalled.
It would be great if you can build 2.2 or try 2.3 versions...
Why don't you go for 2.2?
2.2 take ages for me to do for example openswift. 2.3 is out of the question.I am looking to make a 2.1 custom like quarx
Sent from my GT540 using XDA App
pashinator said:
2.2 take ages for me to do for example openswift. 2.3 is out of the question.I am looking to make a 2.1 custom like quarx
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
why can not you make rom based on cyanogen? I think it wouldn't take ages...
2.3 is easier to develop than 2.2 was apparently. 2.1 is too outdated mate, just hit high and base it on Cyanogen mod 7. Look at Roms for Cyanogen mod 7 on the Desire or LG p500 and work from those?
pashinator said:
2.2 take ages for me to do for example openswift. 2.3 is out of the question.I am looking to make a 2.1 custom like quarx
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
keewanchoapsss said:
2.3 is easier to develop than 2.2 was apparently. 2.1 is too outdated mate, just hit high and base it on Cyanogen mod 7. Look at Roms for Cyanogen mod 7 on the Desire or LG p500 and work from those?
Click to expand...
Click to collapse
hmm, I'm not sure, but I think you need to modify a lot of things to make whole 2.3 working, and it is too much work to do for one man, we would need a group of developers, and we don't have it :/
Thats what i mean but me and someone else are trying to setup build environment to make some.
Anyway cehr is workin on it
Sent from my GT540 using XDA App
I'm now trying to modify 2.2 cyanogen for balkan area, and port some system programs from 2.1...
good luck with your project, when you finish rom I'll try it...
If pashinator would be kind enough to upload all of his developing tools I would be glad to learn. Doesn't take me long to learn things like this. I would then gladly help you.
After searching all over the internet i could only find one flash 2.1 that actually worked on the hero.. http://www.androidpit.com/en/androi...tall-Flash-10-1-On-Android-2-1-Eclair-Devices
BUT.. it only works on stock for some reason.. could we get this in cynanogenmod?
Screenshots Below:
The hulu, kongregate, and sony pictures websites will not load those main screen advertisements unless you have flash 10.1 or higher. also included is the flash checker from adobe's website -http://www.adobe.com/software/flash/about/-
I think you mean flash 10.1, lol, anyway, there are some sense roms that have flash lite, but not 10.1 that I know of, can you CONFIRM this works on your phone? I don't really care about flash, just curious. My memory tells me flash and aosp don't work/haven't yet worked, and the only time there was flash lite in a heroc ROM was on sense based roms....
I think you're right. Any time I've ever seen Flash 10x was in a sense ROM and I kind of miss it being I run GB. Personally I'd like to know if this works as well and what ROM you're using this on.
I think he's looking for a way to get flash 10.1 on cm7, he’s not running it.
-----
Sent from my CDMA Hero. I got some hot Gingerbread-on-Hero action here!
il Duce said:
I think you mean flash 10.1, lol, anyway, there are some sense roms that have flash lite, but not 10.1 that I know of, can you CONFIRM this works on your phone? I don't really care about flash, just curious. My memory tells me flash and aosp don't work/haven't yet worked, and the only time there was flash lite in a heroc ROM was on sense based roms....
Click to expand...
Click to collapse
yes i meant 10.1.. and yes i can confirm this works on my hero!! only oon stock though for some reason. it doesnt work on cm7 or cm6 or fresh but it does work on stock..
SammyM00782 said:
I think you're right. Any time I've ever seen Flash 10x was in a sense ROM and I kind of miss it being I run GB. Personally I'd like to know if this works as well and what ROM you're using this on.
Click to expand...
Click to collapse
yea i want it on GB too. this works perfectly BUT only on STOCK
deke2010 said:
yea i want it on GB too. this works perfectly BUT only on STOCK
Click to expand...
Click to collapse
Flash 10.1 cannot run on our Arm6 processors. Flash lite is in some sense ROMs. It has been discussed in depth and you should be able to search and find the threads on it.
Sent from my HTC Hero CDMA using XDA App
poashll said:
Flash 10.1 cannot run on our Arm6 processors. Flash lite is in some sense ROMs. It has been discussed in depth and you should be able to search and find the threads on it.
Sent from my HTC Hero CDMA using XDA App
Click to expand...
Click to collapse
Looks like they just confirmed it runs on stock 2.1, and last I checked, flashing a rom does not change your processor.
-----
Sent from my CDMA Hero. I got some hot Gingerbread-on-Hero action here!
poashll said:
Flash 10.1 cannot run on our Arm6 processors. Flash lite is in some sense ROMs. It has been discussed in depth and you should be able to search and find the threads on it.
Sent from my HTC Hero CDMA using XDA App
Click to expand...
Click to collapse
well, seeings how it is working on my phone.. i am politely calling u wrong
deke2010 said:
well, seeings how it is working on my phone.. i am politely calling u wrong
Click to expand...
Click to collapse
Works on your phone. Running a stock 2.1 rom. As you can see in the discussion in the link you posted, only people with HTC phones running stock/Sense roms can run it. Flash Lite only works with Sense. Enjoy.
stayclean said:
Works on your phone. Running a stock 2.1 rom. As you can see in the discussion in the link you posted, only people with HTC phones running stock/Sense roms can run it. Flash Lite only works with Sense. Enjoy.
Click to expand...
Click to collapse
Look at the screenshots dude! This isn't flash lite, it's flash 10.1.
Sent from my HTC Hero CDMA using XDA App
deke2010 said:
Look at the screenshots dude! This isn't flash lite, it's flash 10.1.
Sent from my HTC Hero CDMA using XDA App
Click to expand...
Click to collapse
Beings as how you do not seem to want to do the searches:
This has Flash 10.1 lite, again a Sense rom:
http://forum.xda-developers.com/showthread.php?p=9328771#post9328771
However, there won't be a pure aosp rom running flash because of the ARM6 processor. Here is a great read. If I remember right they even discuss why/how it is able to work in your 2.1 Sense ROM: http://forum.xda-developers.com/showthread.php?t=806410&highlight=adobe
http://forum.xda-developers.com/showthread.php?t=866262&highlight=adobe+flash
THIS IS ONLY FOR DEVELOPERS. DO NOT ATTEMPT TO FLASH THIS AT ALL. YOU HAVE BEEN SEVERELY WARNED.
Device specs: http://www.phonearena.com/phones/HTC...7037/fullspecs
Enjoy
RUU_GOLF_U_ICS_40A_HTC_Europe_1.35.401.1_Radio_10. 08.98.09H_1.05.98.08M2_release_260338_signed.exe
RUU_GOLF_U_ICS_40A_HTC_Europe_1.45.401.1_Radio_10. 08.98.09H_1.05.98.11M3_release_262024_signed.exe
thanks to jmztaylor
http://forum.xda-developers.com/show....php?t=1658056
Hello developers will be possible that our Sense HTC Wildfire may have ICS?
Porting sense 4 from the original desire C ruu: Not possible
Porting it from other ARMv6 devices: Possible.
I know the hero and WFS have both got it booting. So if you want to investigate into porting it. Go ahead.
I think that the phone name is desire c.... However our best bet is to wait for a port to an arm6 device (there is a work in progress in wildfire s forum) because desire c is arm7 and a port would be very difficult..
elia222 said:
I think that the phone name is desire c.... However our best bet is to wait for a port to an arm6 device (there is a work in progress in wildfire s forum) because desire c is arm7 and a port would be very difficult..
Click to expand...
Click to collapse
I think it was going to be called the Wildfire C, but then HTC renamed it to the Desire C. To make it seem like a premium device on a budget. (I guess). The WFS thread is a mess of flaming and trolling, and its been closed. So any updates won't be going on there. Although, someone managed to shrink the RUU down enough to fit the WFS partition sizes.
http://www.xatakandroid.com/moviles-android/htc-golf-asi-sera-el-sucesor-de-la-gama-wildfire
it is impossible, haha
tathanhlam66 said:
it is impossible, haha
Click to expand...
Click to collapse
Nothing is impossible, that's how we've got sense 2.1, sense 3.5, gingerbread and ICS on our phone. Once it gets ported to another ARMv6 device, we can work from there.
Sent from my HTC Wildfire using xda premium
somebody check it ruu?
Hi all,
The thread was locked indeed but we are now discussing the ROM on the leaked ruu thread. We have it booting to boot animation however audio/power is causing dalvik to fail, and causes a bootloop.
You could always look at our github to see what we have changed/added/improved/fixed. We will be doing this for the marvel (Wildfire S) and as soon as it boots we will inform you asap.
We are looking for a bit of help so if you see something obvious that we have missed then send us a pull request over github.
Sent from my HTC Wildfire S A510e using xda premium
how we can run this without a kernel 3?
someone should port drivers or create them
and this phone is too old,i think noone will do something like this
it s too difficult
just think this: desire s has a kernel 3 and sense 4 is working fine,but it has A LOT OF problems(crash,freeze,semi-functionl things)
i don t think our phone can support it with sense,we at least should have a fully working cm9 first
i think
benjamingwynn said:
Hi all,
The thread was locked indeed but we are now discussing the ROM on the leaked ruu thread. We have it booting to boot animation however audio/power is causing dalvik to fail, and causes a bootloop.
You could always look at our github to see what we have changed/added/improved/fixed. We will be doing this for the marvel (Wildfire S) and as soon as it boots we will inform you asap.
We are looking for a bit of help so if you see something obvious that we have missed then send us a pull request over github.
Sent from my HTC Wildfire S A510e using xda premium
Click to expand...
Click to collapse
I've been following the thread in the WFS dev section. Will replacing libs from sense 4.0 with CM9/AOSP Libs solve any issues. Or have you already tried that? Could it be a conflict between Beats Audio and the power management driver? Would you have to sacrifice beats to get it working?
Justice™ said:
I've been following the thread in the WFS dev section. Will replacing libs from sense 4.0 with CM9/AOSP Libs solve any issues. Or have you already tried that? Could it be a conflict between Beats Audio and the power management driver? Would you have to sacrifice beats to get it working?
Click to expand...
Click to collapse
Yeah we have replaced the libs, and yes we may have to sacrifice beats audio, although we could also used modified beats libs that were ported to AOSP, but i'm not sure that would integrate it with the onboard beats on/off system :/
Even if we were able to make this possible for our device, it would be unbearably laggy and slow. In my opinion its not worth doing it although its not bad trying. My opinion
rayven18 said:
Even if we were able to make this possible for our device, it would be unbearably laggy and slow. In my opinion its not worth doing it although its not bad trying. My opinion
Click to expand...
Click to collapse
It depends. While ICS can suffer from some slowdown on our device (Atleast at stock clockspeed). It is still usable and can still perform well. As we've seen with Sense 2.1 Gingerbread on the wildfire. It is very fast. And I mean, as fast as stock froyo sense. Which is nothing like CM7 is. So maybe Sense 4 will be even fast and optimized?
Sense 2.1 is not fully working
And ics need a kernel 3
And we don t have enought ram to run this
so it work or don't work?
kylon said:
Sense 2.1 is not fully working
And ics need a kernel 3
And we don t have enought ram to run this
Click to expand...
Click to collapse
You don't need a 3.x kernel to run ICS at all.
benjamingwynn said:
You don't need a 3.x kernel to run ICS at all.
Click to expand...
Click to collapse
you need it for fully working camera,wifi tether,hotspot,bluethoot and stability
anyway as i said we need more ram,wildfire c has at least 450 mb aviable
kylon said:
you need it for fully working camera,wifi tether,hotspot,bluethoot and stability
anyway as i said we need more ram,wildfire c has at least 450 mb aviable
Click to expand...
Click to collapse
Well. Clearly we don't. Because we have ICS with Camera, Bluetooth, WiFi-Tethering working on a 2.6 kernel. Besides, we can use MTD partitions if we don't have enough for the rom. Because we have 512mb of rom. So we can allocate that with MTD partitions.
kylon said:
you need it for fully working camera,wifi tether,hotspot,bluethoot and stability
anyway as i said we need more ram,wildfire c has at least 450 mb aviable
Click to expand...
Click to collapse
Agreed with Justice, the kernel is NOT the issue here, it's simply getting the correct patches to interface the software with the older chipset and HAL, or so I think?