Related
Hey everyone, PDAnet is now available for android!
http://junefabrics.com/android/index.php
PdaNet does NOT require root access or hacking your phone's firmware in order to work. It is just a regular Android application that works on all Android phones as-is. Currently this initial version supports USB tethering on the T-Mobile G1 phone. Tethering is secure and will also charge your phone at the same time. Your phone can either connect to 3G data or WiFi.
Click to expand...
Click to collapse
It works perfectly, and root access is not required.
Enjoy!
Good find! Works best with Opera browser (other browsers such as IE and Firefox, won't display pictures for some reason...) Has some connectivity issues when using longer than 5 minutes (yes, I have enable usb bugging enabled and stay alive while connected via usb) All and all, a good program for your laptop without draining your G1 or when the REAL internet goes out. Good find! Thanks! Also, incredibly simple to use!!!
EXE installer? WTF?! How does it work? Does the program require something on the computer-end too?
I'm Linux user, so I can't use it?
Yes, it seems to be only compatible with windows. Since you're in linux, you may try running it through WINE to see what happens.
andonnguyen said:
Yes, it seems to be only compatible with windows. Since you're in linux, you may try running it through WINE to see what happens.
Click to expand...
Click to collapse
Did you experience the pictures not loading problem also while using IE or firefox?
this doesn't really seem to work yet
I was able to install it without much trouble and the initial connection looked promising (well, some pages came up anyway).
It was basically impossible to connect to Speedtest.net however and Speakeasy only rated my connection at 287/283 kbps at best (the G1 was on WiFi). I tested it again with the G1 on 3G and got a 409/330 kbps (doesn't that seem weird that it would rate better on 3G?) but then it seemed to stop connecting somehow and I had to restart the program and reestablish the connection on the PC. After a few more minutes it happened again. I would call this basically not useful at the moment, but I hope they can work the bugs out and get some decent speed out of it.
For reference, using Tether WiFi to connect to the G1 over 3G Speakeasy rated the connection at 699/316 kbps. And in my experience it's stable/consistent.
As a disclaimer, this was on my work laptop which has some pretty hefty encryption software installed. While this may be the problem, I didn't have any trouble connecting initially (multiple times).
Additional:
Their "reviews" section is just "customer testimonials", as my honest yet critical assessment of the app's inability to perform as intended was NOT posted and they didn't even bother to drop me an email to try to sort out the problem. I hope they can improve on the app, but they're quickly losing my respect and interest.
I just got this. I dl it to my sd card, connect phone to pc w usb, ran exe through windows. Installed program automatically onto phone. Windows asks to install driver for g1 and it does the work from there.
It seems to work ok, the first few tries on my desktop it would disconnect after a few minutes, restarted phone and its been better but still only seems to stay connected for about 20 min, which should be ample time to do alittle websurfing without getting mad about disconnects.
well they might not have replied because they are aware of the problem, and they clearly state that this is beta software. if you look at the known issues the first one is about the connection dropping and having to reconnect.
once they work out the bugs this software will be pretty useful because of how easy it is to use.
if only i could plug the g1 into the 360 would save me $100...or if i could share the connection with my windows media desktop(i use it as a media server for my xbox and its not even close to a internet connection).
i tried to connect it but it does the network doesnt have sufficient MTU settings. xbox live requires a minimum MTU setting of 1364.
darn.
ill be watching for updates though, should be useful once fully operational.
i've been using mine for a while now...no problems once i turn off the wifi switch on my laptop...recently when i plug it in tho, it says PDAnet is expiring soon...is this supposed to be a paid app?
This app is gay... It was pretty good at first... but once the guy updated to r1.5... its been acting gay... it would come up with random blockings... it blocked www.google.com... wtf?... and wikipedia... yahoo answers... so I just got root and installed WiFi Tether for Root users... works way better and doesnt have blocks...
USB tether 4.2.6
This is supposed to be plug and play. A lot of people have said it's great. I have not been so fortunate. Anyway, could someone give me directions on how to use this. 1. plug in phone via USB. 2. settings/wireless settings/ internet tether (on). 3. Go to PC and click on G1Tether click connect. For me this does not work. Help.
This application is a fine hold-over for people who are too stupid to get root, but it is a VERY VERY poor imitation of tethering.
1) A real tethering solution will NOT require proprietary crap to be installed on the CLIENT.
2) Wired or Wireless tether for root users *IS* a *TRUE* plug-it-in-and-it-works solution. Run the program on the phone, plug in the wire, and you're done. No weird nonsense to be installed on the computer.
Hi,
I just wanted to ask if anybody has gotten the usb tether feature to work with a mac? I can't seem to get it to work . Any help will be appreciated.
Thanks
Cyanogen posted on his twitter about a problem with the tethering on windows, not sure if it applies for mac aswell
thanks for the info, will stay alert then!!
btw i know i should wait for the next release for the usb problem, but the thing is that i get the option to mount usb, but if i mount i cant see the device on my computer, and then i get a damaged sd card message on my phone... Anybody got something on this??
thanks
edil939 said:
btw i know i should wait for the next release for the usb problem, but the thing is that i get the option to mount usb, but if i mount i cant see the device on my computer, and then i get a damaged sd card message on my phone... Anybody got something on this??
thanks
Click to expand...
Click to collapse
See if the card will mount in a reader, if not format the card on the phone. If it keeps happening you might need to buy a new card.
i tried
ok
1. you cannot have both USB tethering and USB disk support at the same time.
2. in order for the device to be picked up as a modem/networking device in mac, its gonna need drivers?
how are you supposed to get it working in linux? perhaps the same method could be done via terminal?
edit: 4.2.3.1 , M_Blend Blue b2, Mac 10.5.8 on PowerBook G4 1.67 (PPC)
edit2: http://wiki.cyanogenmod.com/index.php/Tethering - If someone figures it out, please update this wiki to explain to the public how to do it. Thanks. I suppose this goes the same for Windows, if you find the driver that works- Share the knowledge!
hey, I'm also interested in getting this to work on a mac. It does seem like we'll need drivers of some sort, I just have no idea where/what to look for. anyone have ideas? I think i'm going to ask cyanogen via twitter, we'll see what happens
AdrianK said:
See if the card will mount in a reader, if not format the card on the phone. If it keeps happening you might need to buy a new card.
Click to expand...
Click to collapse
Thanks! But i wont need to buy a new one 4.2.3.1 fixed that issue !!
I just cant get the tethering to work on mac, if i find something will let you all know
Forgive me if this was addressed, but I couldn't see it in the rom thread. I'm running 4.2.3.1 and I can't seem to get the usb tether to work. I'm running windows 7, and when I first checked the box, it went through the add hardware wizard, but said the device could not be installed, and now nothing happens.....Just wondering if anyone could shed some light on the issue.
Thanks
Still can't get tethering to work
I tried using my girlfriend's computer, and it worked, but I still can't get it to work on mine.
I'm running windows 7 on a dell inspiron E1505. Not sure if anyone can help. I'd really like to get this working if possible.
No reason to tether through USB... just go wireless on it. (unless you don't have a wireless adapter, I use an iMac so it's built in.)
Tethering works fine on 4.2.3.1 with the new tether 1.60pre_3. I've never tried through the USB though, but i've read it works.
mrandroid said:
No reason to tether through USB... just go wireless on it. (unless you don't have a wireless adapter, I use an iMac so it's built in.)
Tethering works fine on 4.2.3.1 with the new tether 1.60pre_3. I've never tried through the USB though, but i've read it works.
Click to expand...
Click to collapse
mrandroid, USB tethering is a lot faster than wireless tethering. Performance is the primary motivation. I'm trying to get it working on my MacBook, but haven't succeeded yet.
Pachichachi said:
mrandroid, USB tethering is a lot faster than wireless tethering. Performance is the primary motivation. I'm trying to get it working on my MacBook, but haven't succeeded yet.
Click to expand...
Click to collapse
I understand, but if you can't get it done don't despare... you'd be surprised how fast the wireless works. I use it all the time in the car... Tether my iTouch to the G1 lol... works great.
It's due to RNDIS and no support in 10.5 +
The method the tethering CM uses is RNDIS... Current OS X versions do *NOT* support this as it's an MS licensed implementation - some linux distro's support it under licensed terms with MS (or sideways non legal implementations)
There is an RNDIS driver for Mac but it does require some modification to get it to work.... 10.4 had internal support; Leopard and Snow Leopard *DO NOT*.
See: http://wiki.openmoko.org/wiki/MacOS_X#Apple_CDC_Ethernet_driver_10.5.x (This applies to a Neo device - but same story)
If someone on Windows can grab the Networking UPNP info we can modify the source base to work ; though it will work on Leopard; no one has ported this driver yet to Snow Leopard... source: http://bugcommunity.com/downloads/files/AppleUSBCDCDriver-g_ether.326.4.1.zip
I can't get either Apple's CDC nor AJZaurusUSB driver to work in 10.5.8. Frustrating to say the least.
Haywir3 said:
I can't get either Apple's CDC nor AJZaurusUSB driver to work in 10.5.8. Frustrating to say the least.
Click to expand...
Click to collapse
I used Fusion 3.0 with an XP VM and it works... I'm working to see if I can back NAT that connection to Snow Leopard...
NPS_CA said:
I used Fusion 3.0 with an XP VM and it works... I'm working to see if I can back NAT that connection to Snow Leopard...
Click to expand...
Click to collapse
While I commend your efforts, if I have to go to those lengths to get usb tethering to work on os x, I'll just continue to use wireless tethering.
I'd love to see someone tackle this. I get free WiFi at tmobile hotspots on my phone, but not my pc, I could surf on my mac through usb, using the WiFi on my phone if this was implemented.
usb tethering on snow leopard?
Hello guys,
did anybody got cyanogenmod working with usb tethering on snow leopard?
Kind regards,
Thomas
i'd also love to get USB tethering working with Cyanogenmod 7.
<an URL that i can't post because i'm a new user> says that RNDIS was added back to stock OSX as of 10.5.8. i guess this is a vicious rumor and a lie? anyone have more info?
the link is the first one that currently comes up if you google for "+rndis osx 10.5.8". it's a single post at mac-forums.com.
I have done the NAND install method on my Vogue with Myn's Warm Donut RLS3 from 2010-02-20. Since I do not have a data plan, and have the XV6900, which comes without WiFi, I cannot just connect to a local network to get internet access, so how do I get access over the USB cable or via Bluetooth? This would basically be like "Reverse-tethering", that you can do in Windows via ActiveSync (when you are hooked up you can use the desktop PC's internet connection)
So, how do we do this now on Android?
Thanks,
-C
Short version: we don't. Do you want details?
Well, without looking very hard... I know this is possible, since you can do almost anything on Linux. Here's a brief description of how this is done, although it may need some modification for our builds:
http://www.htc-android.com/viewtopic.php?f=5&t=154
OR
http://forums.androidandme.com/topic/internet-over-usb
Search for android ifconfig usb and see what you can find.
polyrhythmic said:
Well, without looking very hard... I know this is possible, since you can do almost anything on Linux. Here's a brief description of how this is done, although it may need some modification for our builds:
http://www.htc-android.com/viewtopic.php?f=5&t=154
OR
http://forums.androidandme.com/topic/internet-over-usb
Search for android ifconfig usb and see what you can find.
Click to expand...
Click to collapse
We certainly could if it was supported in our kernel, but our only USB drivers are adb and mass storage. I believe dzo and mssmison are working on some other. cdc, ethernet, rndis, etc. aren't currently supported.
mrkite38 said:
Short version: we don't. Do you want details?
Click to expand...
Click to collapse
Hmm bummer. Most people with cell service are STILL not paying for data plans, and only about 50% of people with smartphones have data plans yet. Heck...I got a data plan and then got rid of it after 6 months...that alone was $180 worth that was totally wasted for what...the convenience of checking email on my lunch break....yeah that's worth it. At least ATT is only $10 a month now if you are on a shared plan with your family for unlimited data. To bad I an on VZW, lol...
So anyway, it seems like this would almost be a must. I would gladly pay a developer here $50 if he came up with a widget to do it. He'd make a lot more than that on the market too if he developed that.
crobs808 said:
So anyway, it seems like this would almost be a must. I would gladly pay a developer here $50 if he came up with a widget to do it. He'd make a lot more than that on the market too if he developed that.
Click to expand...
Click to collapse
'Real' android phones can do it, our kernel can't. Plus, you can't download from market or use youtube, etc, over bluetooth tethering (I've tried) or via usb from what I've read. Only the cellular data connection and wifi are considered 'valid' by Android. So the dev would have to fix that, too, to make it worthwhile.
mrkite38 said:
'Real' android phones can do it, our kernel can't. Plus, you can't download from market or use youtube, etc, over bluetooth tethering (I've tried) or via usb from what I've read. Only the cellular data connection and wifi are considered 'valid' by Android. So the dev would have to fix that, too, to make it worthwhile.
Click to expand...
Click to collapse
I would be happy just to have WiFi, but the XV6900 (Verizon Touch) doesnt even have WiFi at all. I am considering getting the Nexus when it comes to Verizon in a few months.
crobs808 said:
I would be happy just to have WiFi, but the XV6900 (Verizon Touch) doesnt even have WiFi at all. I am considering getting the Nexus when it comes to Verizon in a few months.
Click to expand...
Click to collapse
Yeah, and the mogul might be a good solve but it only has a 64 MB ROM... I know, been through it all in my head before, too.
Thanks
Thanks. It can sure take some time searching to find some of this info, but even with the NO it won't work I'll still be searching
I want the Bluetooth PAN on Android!
It does not make any sense that Google would know I'm connecting via Bluetooth PAN vs. WiFi to my PC since this occurs behind my Router??? The IP is set at the Router level, my phone should not be visible.
edit... misread post above.
I guess Android itself would know, but that seems odd. But Odd rules sometimes.
Any updates on possibilities yet ??? or there is still no way to use internet on Vogue Andriod without having data plan ?
gogodj said:
Any updates on possibilities yet ??? or there is still no way to use internet on Vogue Andriod without having data plan ?
Click to expand...
Click to collapse
Not yet... the reasons posted above are still true.
Are there any plans to add this feature to future ROMS? The only reason I haven't switched to android from windows mobile is because of this.
damaph said:
Are there any plans to add this feature to future ROMS? The only reason I haven't switched to android from windows mobile is because of this.
Click to expand...
Click to collapse
I don't think so. It's a kernel thing, not a rom thing, and it requires a lot of driver work. But even if it did work, android wouldn't recognize it as a valid connection.
rfcomm + pppd to tether both ways?
I am new to android, but I have networking experience with Linux. I am running Myn's latest Warm Donut on my Sprint Touch. And it seems that hciconfig/hcitool are working to associate the phone with another bluetooth interface. Also, rfcomm seems to be working. And lastly, pppd is installed and (indeed) necessary for the 3g/edge connection as evidenced by the ppp0 in ifconfig. Also, reviewing dmesg, I see L2CAP and BNEP are compiled into the kernel. And pand is also compiled and running. I am not familiar with these, but it seems to offer another route for maybe getting a bluetooth IP link established.
So, my question is simply this. Can we not use the hci commands to associate the phone to another bluetooth adapter on, say, a networked Linux system? Then use rfcomm to build a bluetooth serial connection between the two systems, and finally establish a ppp interface on each end of that serial link? Once that is done, the two systems will share a point-to-point IP link over BT over which they can communicate. Then it is simply a matter of establishing gateways, proxies, iptables NAT, DNS, and routes to make either forwarded or reversed tethered connections. I am reasonably confident I can do that. With a Class 1 bluetooth interface on the Linux server side, the range could be extended for reverse tethering...perhaps making it useful as a moderate range wifi replacement. Other webpages discuss similar approaches using bluetooth rfcomm/pppd. It might require experimentation to find reasonable baud rates for the serial link, etc., but nothing seems obviously impossible. And bluetooth can provide a 1 Mbps+ speeds...again, not great, but better than Edge or dodgy EVDO.
Likewise, we may be able to build a proper PAN connection. I am not familiar with pand and bnep interfaces, but I could probably figure it out.
As I said, I am new to Android, and I am just starting to test this on my phone. Is there something that I am missing with regard to existing hci/rfcomm/pand functionality? Dmesg reports all of these compiled in and hcitool scan seems to do something...it blinks the blue light and find my laptop. I guess I am just asking if someone can shoot holes in my idea before I waste too much time pursuing it.
Thanks.
mprinkey said:
I am new to android, but I have networking experience with Linux. I am running Myn's latest Warm Donut on my Sprint Touch. And it seems that hciconfig/hcitool are working to associate the phone with another bluetooth interface. Also, rfcomm seems to be working. And lastly, pppd is installed and (indeed) necessary for the 3g/edge connection as evidenced by the ppp0 in ifconfig. Also, reviewing dmesg, I see L2CAP and BNEP are compiled into the kernel. And pand is also compiled and running. I am not familiar with these, but it seems to offer another route for maybe getting a bluetooth IP link established.
So, my question is simply this. Can we not use the hci commands to associate the phone to another bluetooth adapter on, say, a networked Linux system? Then use rfcomm to build a bluetooth serial connection between the two systems, and finally establish a ppp interface on each end of that serial link? Once that is done, the two systems will share a point-to-point IP link over BT over which they can communicate. Then it is simply a matter of establishing gateways, proxies, iptables NAT, DNS, and routes to make either forwarded or reversed tethered connections. I am reasonably confident I can do that. With a Class 1 bluetooth interface on the Linux server side, the range could be extended for reverse tethering...perhaps making it useful as a moderate range wifi replacement. Other webpages discuss similar approaches using bluetooth rfcomm/pppd. It might require experimentation to find reasonable baud rates for the serial link, etc., but nothing seems obviously impossible. And bluetooth can provide a 1 Mbps+ speeds...again, not great, but better than Edge or dodgy EVDO.
Likewise, we may be able to build a proper PAN connection. I am not familiar with pand and bnep interfaces, but I could probably figure it out.
As I said, I am new to Android, and I am just starting to test this on my phone. Is there something that I am missing with regard to existing hci/rfcomm/pand functionality? Dmesg reports all of these compiled in and hcitool scan seems to do something...it blinks the blue light and find my laptop. I guess I am just asking if someone can shoot holes in my idea before I waste too much time pursuing it.
Thanks.
Click to expand...
Click to collapse
That's all correct, and I've done it before. But the issue is that Android only acknowledges TWO kinds of data connections: cellular and wifi. When I setup a pan and iptable'd my way to the internet, I was able to get google maps, but not market. I haven't tried Opera but the android browser didn't work. Etc., etc. So I think the usefulness of pan is limited. The real challenge here is for someone to dig through the source and find out how to ADD bt and USB as 'valid' data interfaces. I've never looked into that.
Cellular connection is ppp0. Have you tried running pppd over rfcomm? Or assign an identical IP address to the pan/pppd interface and set it's metric a notch lower so it is preferred over the ppp0 one? Also, will Android route over a VPN? Setup pan and VPN over it. VPN seems to "own" Internet traffic when it is configured according to this: http://code.google.com/p/android/issues/detail?id=4205
Also, I've seen posts indicating that the default browser can be configured to use a proxy.
Just ideas and I'd like to know what you've tried so I don't waste my time. Thanks for your input.
mprinkey said:
Cellular connection is ppp0. Have you tried running pppd over rfcomm? Or assign an identical IP address to the pan/pppd interface and set it's metric a notch lower so it is preferred over the ppp0 one? Also, will Android route over a VPN? Setup pan and VPN over it. Also, I've seen posts indicating that the default browser can be configured to use a proxy.
Just ideas and I'd like to know what you've tried so I don't waste my time. Thanks for your input.
Click to expand...
Click to collapse
Nope, didn't try any fancy-pants stuff. When I did all this, I was a total n00b to linux (only a partial n00b now) and it didn't take too long, so I say - give it a try! That's the spirit around here.
mrkite38 said:
Nope, didn't try any fancy-pants stuff. When I did all this, I was a total n00b to linux (only a partial n00b now) and it didn't take too long, so I say - give it a try! That's the spirit around here.
Click to expand...
Click to collapse
Great. That is encouraging. The link that I edited into my previous post seems to indicate that ALL traffic gets routed over the VPN when it is established. That would fix any security concerns I'd have about using a high-powered BT adapter. I think I will give it a spin.
USB Ethernet
In my kernel hacking trying to get Debian to run, I managed to enable USB Ethernet (the function driver; USB gadget crashes the phone) working, and I've been using it to SSH into my phone. I've used it to apt-get update without any problems. I believe it's just a kernel config option (although I might have done some code modifications), so the problem isn't the driver, it's with Android's userspace.
gTan64 said:
In my kernel hacking trying to get Debian to run, I managed to enable USB Ethernet (the function driver; USB gadget crashes the phone) working, and I've been using it to SSH into my phone. I've used it to apt-get update without any problems. I believe it's just a kernel config option (although I might have done some code modifications), so the problem isn't the driver, it's with Android's userspace.
Click to expand...
Click to collapse
So you enabled USB ether in the kernel config and it's working for you? Against a linux host or Windows? that would be nice, I haven't tried that in ages.
Edit: yes, the 'valid' connection check is definitely in Android userspace. But I either forgot or didn't know that our usb ether func driver worked when enabled.
I'm completely new to this and cannot find anything anywhere which gives me the confidence to root my brand new N1.
I need the N1 to connect to an ad hoc network. For a couple of reasons, I cannot use a router, it has to be ad-hoc. In fact, I can't believe that Google have disabled ad-hoc facility, if I had known I wouldn't have bought it! It makes no sense!
Anyway, I have installed the android sdk and drivers, no problem, my pc recognises the phone ok.
I don't know what to do next. There seems to be several options, but none specific to my phone.
One was to use Superboot, but there isn't one specific to my build number which is EPF21B, the firmware version is 2.1-update 1.
Another option is to follow the cyanogen instructions, but will this work on my phone?
Can anyone point me in the right direction? A link to good, easy to understand instructions and the necessary downloads?
Like I said, a router is not possible - this is what everyone recommends on the other forums I have posted on, but it won't work.
Thanks for taking the time, kewl.....
Can't be done, as far as i'm aware
I've got to say that I am staggered that Google has actually BLOCKED this facility, it makes no sense to me.
I have been waiting for this phone to become available for months, and now it is here I find that gooogle have deliberately crippled it, it's virtually useless to me!
Luckily, I have a 7 day cooling off period and I am going to return the phone and go back to my slow, clumsy and buggy Nokia, but at least it works.
Thanks guys!
I've got to say that I am staggered that Google has actually BLOCKED this facility, it makes no sense to me
Click to expand...
Click to collapse
don't you have a pc with Windows 7? you could try a software called virtual rooter or connectify, to use your pc as a access point to your phone. only ti use at home or work and only if you're looking to a way to give internet access to your phone. that's what I'm doing when i at home where i don't have wifi access. using a virtual machine running a windows 7 OS with a external wifi drive plug in to it (because my real pc runs vista). that did the trick for me
AHA im not alone!! I have the exact same UK version of the Nexus one as you. Ive also had the same problems.. its not htat you cant do it its just the phone is only a week old and none of the modders have modded the new version yet. Paul the guy from modaco is making me a epf21b fastboot i think they just have to change a few things for all the usual root goodies to become available to us UK n1ers
basically ill be sending him a copy of my epf21b today then he can make a fastboot for it then we can do all the goodies...
ill update this thread when i get some progress
SENTIE said:
AHA im not alone!! I have the exact same UK version of the Nexus one as you. Ive also had the same problems.. its not htat you cant do it its just the phone is only a week old and none of the modders have modded the new version yet. Paul the guy from modaco is making me a epf21b fastboot i think they just have to change a few things for all the usual root goodies to become available to us UK n1ers
basically ill be sending him a copy of my epf21b today then he can make a fastboot for it then we can do all the goodies...
ill update this thread when i get some progress
Click to expand...
Click to collapse
No, you can't connect to ADHOC networks on the Nexus. Even with root i'm pretty sure it can't be done.
I was able to connect to my gf iPhone mywi internet tethering and use her connection. My n1 couldn't get a high-speed connection so I turn on her iPhone ad-hoc network and was able to connect
I have a rooted cm phone with the wifi tether app and the barnacle apparently as well. Hope that helps
I'm using tnt lite 3.1.4, also had vegan, but none could do anything with my 3g sticks. Following different forums, I see most devices can (at least some specific sticks). Has anyone managed to set up a 3G conection? Is there a how to I could follow? What chipset the stick had?
Thanks,
T.
I tried a sprint usb aircard.. no go..
The only way I have been able to get a 3G connection is to wirelessly tether to my DroidX work phone...
1) Install Z4root on the droid and run it to root the phone
2) Install wifi tether on the droid and set up a wep key and ssid
3) Turn on the wifi tether
4) The table sees this wifi "router" or connection, I set the wep key on that connection, the two units negotiate an IP, and zap, it has 3G through the droid
Not sure if this is helpful, but that is what I had to do in my own situation.
if it's in the kernel, it should seriously work, but someone has to build it. there's absolutely no reason for this not to work if someone builds it -- it has conceptually worked in linux for years.
myndwire said:
if it's in the kernel, it should seriously work, but someone has to build it. there's absolutely no reason for this not to work if someone builds it -- it has conceptually worked in linux for years.
Click to expand...
Click to collapse
I can build the kernel but I believe we need to add some stuff in initrc for the usb to connect to serial (like ttyUSB). Once I get another Gtab, I'll look into this.
clemsyn said:
I can build the kernel but I believe we need to add some stuff in initrc for the usb to connect to serial (like ttyUSB). Once I get another Gtab, I'll look into this.
Click to expand...
Click to collapse
Please do -- this is the one feature I'm dying to have! I promise a (small, sigh) donation once it's done
Here's the extra scripts I need to wired-tether my cheap T-mobile prepaid phone to my linux netbook:
http://blog.swatteksystems.com/what...ether-huawei-u7519-wind-mobile-linux#comments
THANKS!
clemsyn said:
I can build the kernel but I believe we need to add some stuff in initrc for the usb to connect to serial (like ttyUSB). Once I get another Gtab, I'll look into this.
Click to expand...
Click to collapse
exactly man, thanks for stepping up! this will be ultimately useful on many different devices with usb host features, and shouldn't be ridiculously difficult to get going, and gain some real cred with the tablet community, especially now as we're the first with this new tegra2 platform, with over 20-30 new devices coming soon. i'm unsure of how many are wifi-only, but the ability to merely jack in with a 3g/4g usb modem would be ultimately useful to many, and will save a ton of money for folks.
clemsyn said:
I can build the kernel but I believe we need to add some stuff in initrc for the usb to connect to serial (like ttyUSB). Once I get another Gtab, I'll look into this.
Click to expand...
Click to collapse
A kernel supporting the 3g sticks would be great I have 3 of them, so I am ready for testing
T.
TeamSpeed said:
The only way I have been able to get a 3G connection is to wirelessly tether to my DroidX work phone...
1) Install Z4root on the droid and run it to root the phone
2) Install wifi tether on the droid and set up a wep key and ssid
3) Turn on the wifi tether
4) The table sees this wifi "router" or connection, I set the wep key on that connection, the two units negotiate an IP, and zap, it has 3G through the droid
Not sure if this is helpful, but that is what I had to do in my own situation.
Click to expand...
Click to collapse
Thanks for that. I also use teether from my NexusOne, but I have to give it up as I got to move to BlackBerry - so I need a different solution... (what a step backwards :-(
T.
The stick is probably seen in the kernel. The other parts, Networkmanager, dialier, ppp are not on the tab. They would have to be recompiled for the arm processor and I'm not sure what other work is needed.
Thanks Clemsyn. Using your latest kernel with Vegan B5.1. I bought a Novatel USB727 (Verizon) stick off ebay (built in Linux support) just to try this out. Would gladly test if needed.
I would also be happy to test with ATT and Verizon 3G USB modems...
Update:
Built a kernel with 3g USB support, used my friend's Verizon Mifi, plugged it in the Gtab and it turns on, Dmesg shows it is detected as Novatel wireless and shows it's serial info. That's about it, can't browse and use it. Any ideas?
I'll try my usb modem using the ubuntu load. It should have the other networking parts to dial and connect.
In the ubuntu load, networkmanager is not supported yet so usb modems are still on hold.
Yes please, we need this. I have a sprint card from work and would love to ditch the laptop when travelling. Clemsyn, I could send you a copy of sprint smart view 3g manager if you think it would help.
Sent from my VEGAn-TAB-v1.0.0B5.1 using Tapatalk
I am able to use 3G easily using MyWi app from Cydia on my iPhone. This Gtablet works great on 3G! And since I always have my phone on me, I always have a 3G network on my Gtablet! iPhones basically suck, but this is probably the only good thing I've been able to use it for! And man oh man, its working great! Btw, When my phone contract runs out, I'm going to change to the Evo! That would be sweet!
SirDroidAlot said:
I am able to use 3G easily using MyWi app from Cydia on my iPhone. This Gtablet works great on 3G! And since I always have my phone on me, I always have a 3G network on my Gtablet! iPhones basically suck, but this is probably the only good thing I've been able to use it for! And man oh man, its working great! Btw, When my phone contract runs out, I'm going to change to the Evo! That would be sweet!
Click to expand...
Click to collapse
Same here. I've been using Wireless Tether on my rooted Droid X with an unlimited 3G data plan for several weeks and it is pretty sweet. And like you said, since I have my phone with me all the time anyway, this seemed like an obvious solution.
I would be interested in the progress of this usb effort since my carrier now offers 4G modems.
Does anyone have any idea if the gtablet will tether to the blackberry
Here Made support for a similar tablet Toshiba Folio 100:
http://forum.xda-developers.com/showthread.php?p=10617881
Perhaps our main problem - is that excluded from the firmware application for telephone calls?