msm_i2c: waiting for notbusy problem - Touch CDMA Android Development

Hi guys
Let me first thank to all devs that made Andorid on Polaris (Pola100 in my case) possible
Now to the problem.. I am using Haret with Incubus26jc's Super Froyo (RLS10.5)
80% of the cases when I launch Haret (yep, still not ready to wipe winmo) I get an error msm_i2c : waiting for notbusy, few minutes later android start to load but never get's beyon the red eye.
If the error does not appear, launch is fine and I get to Android in 2-3 minutes and everything is just fine..
I tried few zImage but without any success .. what I am missing?
Anyone else with this problem?

Bump...
Am I the only one affected?

I get a similar problem on pola200 and can't find a way to solve it.
+Update
I seem to have solved all my problems by adding msm_sdcc.msmsdcc_fmax=16000000 to default.txt

New kernel parameter
Try the htcpolaris.no_boot_vibration kernel parameter
See... "forum.xda-developers.com/showthread.php?t=452108&page=350"

Related

Magic 32B keeps rebooting

Hi guys,
I have a problem with my Magic 32B and hope one of you guys could figure out where this all come from.
Since a couple of weeks my magic has become very unstable and I would say I have about 20 to 30 freezes or reboots a day. It suddenly started when I switched from a nightly froyo to another and since then regardless on the ROM I flash I always have the same behaviour (I'm currently on the CM6 RC1).
I tried the following:
- full wipe via AmonRa + format of SD (128 SWAP + 512 EXT + FAT) clean reinstall of a presumably stable rom --> failed keeps rebooting or freezing
- I did a fastboot erase system -w + flash of a clean ROM --> failed
The bizarre thing is it never crashes when the phone is USB plugged on my laptop, therefore I've never seen a logcat showing anything bad ...
Also I can't identify any pattern or scenario which would systematically frag my magic... Even when I install a fresh new ROM, it can work pretty well for as long as an hour but then start being screwed up.
I've spent quite some time on this forum desperately looking for someone experiencing the same troubles but so far unsuccessfully ...
Would you guys have any idea ?
cheers
ZeRoT
zerot said:
Hi guys,
I have a problem with my Magic 32B and hope one of you guys could figure out where this all come from.
Since a couple of weeks my magic has become very unstable and I would say I have about 20 to 30 freezes or reboots a day. It suddenly started when I switched from a nightly froyo to another and since then regardless on the ROM I flash I always have the same behaviour (I'm currently on the CM6 RC1).
I tried the following:
- full wipe via AmonRa + format of SD (128 SWAP + 512 EXT + FAT) clean reinstall of a presumably stable rom --> failed keeps rebooting or freezing
- I did a fastboot erase system -w + flash of a clean ROM --> failed
The bizarre thing is it never crashes when the phone is USB plugged on my laptop, therefore I've never seen a logcat showing anything bad ...
Also I can't identify any pattern or scenario which would systematically frag my magic... Even when I install a fresh new ROM, it can work pretty well for as long as an hour but then start being screwed up.
I've spent quite some time on this forum desperately looking for someone experiencing the same troubles but so far unsuccessfully ...
Would you guys have any idea ?
cheers
ZeRoT
Click to expand...
Click to collapse
Probably other people will say it, but wrong forum.
Also, what ROMs have you flashed after the nightly froyo? Nightly froyos are cautioned, which I'm sure you knew.
yep, I used a couple of FroYo SP French Connection nightlies and then switched to CM V6.0.0-RC1.
(sorry if it's the wrong forum, @admins, please feel free to move it to wherever make sense)
zerot said:
Hi guys,
I have a problem with my Magic 32B and hope one of you guys could figure out where this all come from.
Since a couple of weeks my magic has become very unstable and I would say I have about 20 to 30 freezes or reboots a day. It suddenly started when I switched from a nightly froyo to another and since then regardless on the ROM I flash I always have the same behaviour (I'm currently on the CM6 RC1).
I tried the following:
- full wipe via AmonRa + format of SD (128 SWAP + 512 EXT + FAT) clean reinstall of a presumably stable rom --> failed keeps rebooting or freezing
- I did a fastboot erase system -w + flash of a clean ROM --> failed
The bizarre thing is it never crashes when the phone is USB plugged on my laptop, therefore I've never seen a logcat showing anything bad ...
Also I can't identify any pattern or scenario which would systematically frag my magic... Even when I install a fresh new ROM, it can work pretty well for as long as an hour but then start being screwed up.
I've spent quite some time on this forum desperately looking for someone experiencing the same troubles but so far unsuccessfully ...
Would you guys have any idea ?
cheers
ZeRoT
Click to expand...
Click to collapse
This may not be your problem, but I found personaly that as soon as I enabled swap, my phone became a bit unstable. It was not rebooting itself when I had compcache on. Then I turned that off and switched to swap and now my phone rebooted itself sometimes. For me compcache was noticeably faster but swap multitasks better. So I've kept swap in spite of reboots. I have also found that switching between them either way my phone becomes unstable and rebooted itself multiple times before becoming stable on compcache or at least not rebooting as much on swap.
Sent from my HTC Magic using XDA App
well i had the same issue. nothing helped, i reinstalled the spl, radio, rom, recovery, everything.
the only thing that helped is :
REROOTING YOUR PHONE
thereĀ“s no other way.
have a good day.
zerot said:
Hi guys,
I have a problem with my Magic 32B and hope one of you guys could figure out where this all come from.
Since a couple of weeks my magic has become very unstable and I would say I have about 20 to 30 freezes or reboots a day. It suddenly started when I switched from a nightly froyo to another and since then regardless on the ROM I flash I always have the same behaviour (I'm currently on the CM6 RC1).
<snip>
Click to expand...
Click to collapse
I would expect a Donut based ROM to be fine. Which ROMs have you tried since the freezing/rebooting problem started?
The next time it reboots you should take a copy of /proc/last_kmsg and post it here. You can do so with:
Code:
adb shell cat /proc/last_kmsg > last_kmsg.log
Reboot cycle
I'm sorry if I'm in the wrong area, but I also have the same problem. I have a mytouch 3g (32B). I recently flashed it with "Froyo SPF Connection" and that made it reboot just about every 30 seconds. I restored it to the 1.6 Donut rom and it kept rebooting but repeated the process and now it seems fine. The problem is I don't want the 1.6 rom but that's all can have right now since everything else slows it down and freezes it. Please help me solve this problem. I'm opened to any useful recommendations and every help is appreciated.
benjaminb007 said:
I'm sorry if I'm in the wrong area, but I also have the same problem. I have a mytouch 3g (32B). I recently flashed it with "Froyo SPF Connection" and that made it reboot just about every 30 seconds. I restored it to the 1.6 Donut rom and it kept rebooting but repeated the process and now it seems fine. The problem is I don't want the 1.6 rom but that's all can have right now since everything else slows it down and freezes it. Please help me solve this problem. I'm opened to any useful recommendations and every help is appreciated.
Click to expand...
Click to collapse
Eclair ROMs are just as stable as donut ROMs and as fast as donut. Just don't use Froyo till it's stable. Use CM5.0.8 or any CM variant and you should be fine.
I'm having the same problem after flashing the new radio the phone will boot and as soon as its done loading the home screen it will reboot then load the home scree and turn off
Flashed French Connection ROM few days back and have had same problems as above ever sense.. Flash other ROM's and they constantly Reboot. cy 6.0 Working for me now, But only my Nandroid back up of it. Re flashed it fresh and it reboots...
why dont you reroot ur phones like i told you?
This freezing and rebooting problem is weird - it doesn't make sense a lot of the time.
I've developed a ROM based on AOSP 2.2 for the G1 and it also seemingly randomly freezes or reboots.
When it reboots it's usually the result of an ARM9 crash and so far I have tracked it down to a call to a proprietary library function which doesn't return to the correct return address. It seemingly returns to a random address and the consequences of doing so is random. Sometimes it causes a freeze or a reboot and other times it doesn't.
I'm starting to suspect something in the JNI code is causing the problem but it's difficult to track it down.
FroYo SP French Connection is overclocked to 614 by default. My Mytouch (32B) reboots and freezes constantly if i don't turn it down to 576. Try turning the overclock down in set cpu to 528 first then if its stable you can try turning it up a little.
Urgh, I hadn't considered clock speed as a potential problem.
What if some of our phones are unstable at the default Froyo maximum of 528 MHz?
I am (was) in the same situation (Magic 32B). It started with CM6 RC1 first and after it, my nandroid backups got weird too! I always wiped everything and rebooted by myself several times. I never played with overclocking, compcache or ext partition - but after trying other FROYO ROMs as well, even a clean install of CM5.0.8 final was unstable got fc's and rebooted...
So, after one year of trying nearly every ROM out there, i finally made a decision: i went back to my stock rooted 1.5 cupcake!! Yes, 1.5! I never tried this ROM before - even in my first days i immediately switched to sense...
And what should i say? I'm blown away by the speed and stability of this ROM! Unbelievable! ... sad day ... really sad ....
And my decision after that: i will wait for an official FROYO for Magic, which was at least officially announced...
sad, sad, sad...
alutastisch said:
why dont you reroot ur phones like i told you?
Click to expand...
Click to collapse
Well, i think - like my approach - rerooting will not bug down the fault in FROYO ROMs. I hope it will be sorted out, but for me the daily flashing is over for now. I really appreciate the hard work of all the devs and i also donated to some, but at the end of the day i just want my phone and don't want to wait for going to homescreen or missing a call because of the lags...
sad, sad, sad...
akivlin said:
Urgh, I hadn't considered clock speed as a potential problem.
What if some of our phones are unstable at the default Froyo maximum of 528 MHz?
Click to expand...
Click to collapse
Well, I think default for stock unrooted phones is like three hundred something you could try that but it would be really slow.
hudl said:
I am (was) in the same situation (Magic 32B). It started with CM6 RC1 first and after it, my nandroid backups got weird too! I always wiped everything and rebooted by myself several times. I never played with overclocking, compcache or ext partition - but after trying other FROYO ROMs as well, even a clean install of CM5.0.8 final was unstable got fc's and rebooted...
So, after one year of trying nearly every ROM out there, i finally made a decision: i went back to my stock rooted 1.5 cupcake!! Yes, 1.5! I never tried this ROM before - even in my first days i immediately switched to sense...
And what should i say? I'm blown away by the speed and stability of this ROM! Unbelievable! ... sad day ... really sad ....
And my decision after that: i will wait for an official FROYO for Magic, which was at least officially announced...
sad, sad, sad...
Well, i think - like my approach - rerooting will not bug down the fault in FROYO ROMs. I hope it will be sorted out, but for me the daily flashing is over for now. I really appreciate the hard work of all the devs and i also donated to some, but at the end of the day i just want my phone and don't want to wait for going to homescreen or missing a call because of the lags...
sad, sad, sad...
Click to expand...
Click to collapse
I totally agree. I know waiting for the official Froyo for the Magic may take years before it's finally released, but I'm tired of flashing and testing new roms every day without getting the results I want. As a result of this frustration, I will go back to Donut 1.6 for now and wait for the official update. Hopefully 5.1 won't be out before we finally get the update
TJ Gonz said:
Well, I think default for stock unrooted phones is like three hundred something you could try that but it would be really slow.
Click to expand...
Click to collapse
Yes, I will find out the maximum Donut clock speed and test at that speed.
TJ Gonz said:
Well, I think default for stock unrooted phones is like three hundred something you could try that but it would be really slow.
Click to expand...
Click to collapse
I modified the kernel to allow only the following frequencies:
09-12 01:41:12.579 D/setcpu ( 281): Autodetecting Frequencies
09-12 01:41:12.599 D/setcpu ( 281): Frequencies autodetected: 122880 128000 245760
Click to expand...
Click to collapse
Unfortunately the phone still rebooted due to an ARM9 crash.
I've attached a small CM6 RC1 update as a test fix for the ARM9 crashing.
Anyone experiencing random freezing or reboots should give it a try by copying it to your SD card and boot to recovery to flash it.
If you install the test fix but still experience random reboots I'd appreciate if you could upload a copy of /proc/last_kmsg to http://android.pastebin.com and post the link to it in here. A logcat up to the point of the reboot would be very helpful too.

switching on/off or rebooting...... = crazy things

hey there fellas
(i'm sorry to post my problem here in the development section but i guess it might be related to the lag fix)
My SGS is acting weird lately , dunno if its related to the lag fix ( [UTIL] One Click Lag Fix 1.0 - 2.0 ) ever since i got the phone with normal use iv never seen anything funny like this. it all started with lag fix version 1 , the phone was fast and with that fix even faster , the phone was all good started with the root as step 1, then it was the market fix, after that i was tempted to try the lag fix which was amazingly effective, went from version 1 to version 2 of it and then it started.
the phone took long to respond 'sometimes' when the screen was off and after a day the phone simply didnt want to get out of standby ( black screen ) so used the boot mode and formatted the phone , once the phone started i formatted the internal sd and rebooted and applied the Root-market fix-lag fix ver 1.0 in that sequence, now the phone seems a little weird . by weird i mean strange things r happening like when i goto the apps menu the icons move by them selves in a random way after a reboot. I set it up to show apps in the first couple pages followed by games , now its all messed up and i didn't mind it at all.
with my internet provider i really have to keep an eye on my 3g usage, and have been using 3g watchdog to keep track. now i notice everytime i restart or switch off / on the phone, the counter goes back to 0 which really gets on my nerves.
now to track the problem would someone point me in the right direction ?
could it be the lag fix ? could it be the program itself ? should i switch to another ? would i need a fresh flash ? my phone is working on eclair 2.1 version I9000JXJF1 , using kies since day 1 there has been no firmware update for the U.A.E and i dont want to risk updating to anything unless its official from samsung.
any help is much appreciatted ^_^
it's interestingly weird case.
i'll start by suggesting to wipe the cache data, and data in recovery mode or
*2767*3855#
WARNING! FACTORY RESTORE, DATA WIPE AND RESET TO FACTORY STATE, as soon as you enter the last # use it only if you want to clean wipe your phone
i started with the first and then was like WTH and went with the second only to find out its the same procedure hehehe..... anyways phone is fresh now , started with rooting then off with lag fix 2.0 ( hope it dont get that same problem again ) . Now i notice there's no bootup logo when starting the SGS ( the swirling S ) but the sound still plays , is this normal ?
mazroui said:
the phone took long to respond 'sometimes' when the screen was off and after a day the phone simply didnt want to get out of standby ( black screen )
Click to expand...
Click to collapse
I had this exact same issue when I was using SetCPU. Uninstalled it and the problem was gone. Also some of the custom kernels are having wake-up lag.
mazroui said:
when i goto the apps menu the icons move by them selves in a random way after a reboot
Click to expand...
Click to collapse
Are you using LauncherPro? If so, this is common behavior and might also be so with other launchers. After booting up it will sequentially load your apps and that's why they will seem to popup in a random order bouncing about in the menu. After it's finished loading everything it will all be back to normal.
mazroui said:
the counter goes back to 0 which really gets on my nerves
Click to expand...
Click to collapse
Seems to me that you had a problem with applying your lagfix and that the phone doesn't store your app-data properly.
My recommendation is to update to the JM5 firmware. It's the version that's been most tested with the lag fixes. I'm running JM5 with RyanZA's Lag Fix 2.0 and SamSet 1.9e (except kernel). It works like a charm and have done so for the past week. No wake-up lag, crashes or other weird behavior.
Hope this helps, and good luck
mazroui said:
i started with the first and then was like WTH and went with the second only to find out its the same procedure hehehe..... anyways phone is fresh now , started with rooting then off with lag fix 2.0 ( hope it dont get that same problem again ) . Now i notice there's no bootup logo when starting the SGS ( the swirling S ) but the sound still plays , is this normal ?
Click to expand...
Click to collapse
First boot will always take longer time and might also affect the sync between the sound and animation. It's normal!
mekwall
thank you very much for your informative reply
let me start replying to what u just told me
#1
I had this exact same issue when I was using SetCPU. Uninstalled it and the problem was gone. Also some of the custom kernels are having wake-up lag.
i dont have SetCPU installed as i have tried it for a few days and found it useless , since i dont have the 1.2 ghz tune i dont see why i should even keep the app, yes i saw how the app messes with the phone so i removed it.
#2
Are you using LauncherPro? If so, this is common behavior and might also be so with other launchers. After booting up it will sequentially load your apps and that's why they will seem to popup in a random order bouncing about in the menu. After it's finished loading everything it will all be back to normal.
no im not using Launcher Pro and i could see how it would affect the arrangment of the programs but it wasn't that. My guess is it might probably be 1 of 2 , either titanium backup or Mybackup pro after restoring the data and not the apps.
#3
Seems to me that you had a problem with applying your lagfix and that the phone doesn't store your app-data properly.
im guessing a maybe here since i dont know how it would affect my 3g watchdog's app or make it reset the counter, i switched to Network monitor ( not as good as 3g watchdog but it does the same job ^_^ )
#4
My recommendation is to update to the JM5 firmware. It's the version that's been most tested with the lag fixes. I'm running JM5 with RyanZA's Lag Fix 2.0 and SamSet 1.9e (except kernel). It works like a charm and have done so for the past week. No wake-up lag, crashes or other weird behavior.
just like i said id love to go that way but can wait a month or 2 till froyo joins the fun.
#5
First boot will always take longer time and might also affect the sync between the sound and animation. It's normal!
i hope its just a sync problem , but the phone gave up on the animation , after a couple of tries yea the logo simply isn't there anymore just the sound but i did notice a little faster boot up time this way with only a small vibration to indicate the phone has started.
i'll redo everything again 1 step at a time 1 app at a time , i'll delete my backups as i could do it just this time to get a good fix after a clean boot , and i guess i'll just stick with version 1 as i didnt see anything wrong with it so no need to jump to version 2 of the lag fix
could anyone tell me what app will back up all my sms/mms/call log without any trouble ? does titanium do that coz i looked everywhere and couldn't find anything regarding that
Thanx to everyone for your help ^_^
now to find a fix for that gangster game after redoing everything
ok new discovery
using mybackup pro to backup all the sms's and mms's restarted after the restore and boom
what i see now is the old background from before the *2767*3855# method and the apps linked to homescreen from before , could it be the trouble maker ?
ok now im not gonna use it and test the whole procedure all over again
ok i guess thats it... even after a factory reset the logo wont show up again T_T
any tutorials on how to flash the original FW safely ? where could i find my original FW ? thing is i need arabic lang and doubt the JW5 has it built in anyways im off for now....... ~ spends the night googling~
mazroui said:
ok i guess thats it... even after a factory reset the logo wont show up again T_T
any tutorials on how to flash the original FW safely ? where could i find my original FW ? thing is i need arabic lang and doubt the JW5 has it built in anyways im off for now....... ~ spends the night googling~
Click to expand...
Click to collapse
JPJG8 off samsung-firmwares is very good, and has arabic support.
ok ^_^ thanx for the fast reply
downloading it as im typing right this instance
will post on how things go with my SGS
having trouble right now with restoring my apps using titanium T_T whenever i restore it freezez on the first app it shows guess i have to install them 1 by 1
i guess a fresh start is a must
Again thanx you fellas for the informative/fast replies
Much appreciatted ^_^
last but not least
everything downloaded and ready for the flash
using a youtube video looking at a detailed guide to flash my sgs
i notice the big FW file has 3 files starting with CODE , CSC and another CSC
my file JPJG8 has got OJP_JG9 and the files in it are
zImage
param.lfs
modem.bin
factoryfs.rfs
dbdata.rfs
cache.rfs
where do i go from here ?
B U M P . . . . . . .
Anyone knows whats the deal with those files

eViL-NXSense-v.1.13.1

Hey guys. I tried asking these questions on the official thread of this Rom but somehow my post is getting lost in the tons of pages which are accumulating everyday So here are my questions :
y2jamit said:
Alright folks. I finally managed to move from CM6 stable to NXSense. Before moving from CM 6, I partitioned my SD card using Rom manager with a partition of 512 MB & a swap of 32 MB.I managed to install version eViL-NXSense-v.1.13.1. However after that eViL-Q&D-NXSense-v.1.14.1 was released. So I downloaded that first from the 4shared link. I tried to install the new ROM from Rom Manager using the wipe option. However when the phone goes into recovery it shows formatting blah blah blah and then phone doesn't install the 1.14.1 Rom and reboots and gets stuck on the Google cross logo.
I managed to restore back to 1.13.1 from the back up that I had made. Now instead of using the Rom Manager I booted into recovery and tried to use the install from SD card option. This time the phone started copying files and showed that twice. After this I get the following huge error:
E: Can't symlink /system /customize/resource/bootanimation.zip
E: Failure at line 27:
symlink/data/local/bootanimation.zip
SYSTEM : customize/resource/bootanimation.zip
Installation aborted.
I had to once again resort back to my backup. Can anyone help me out this issue?
After all this I even tried to install 1.13.1 from the recovery using the install from sd card option and apparently this also gave me the exact same bootanimation error. So I guess both the zips are ok. not sure what else could be going wrong.
Also even after flashing networkfix on 1.13.1, the market still struggles to work. It shows loading for some time and then gives an option to retry. However if I try to search for any application or go to downloads, the market starts working normally. Can anyone also provide a fix for this problem?
I really want to use this as my default rom because I am in love with it Excellent work Evil !!! Just want to sort out these issues.
Click to expand...
Click to collapse
In addition to the above mentioned post, I wanted to add that I now also have a2sd enabled after running the commands from terminal emulator. What is the simplest way to update from 1.13.1 to a higher version? Also when loading market for the first time, the GPRS connection disappears and comes back in like a minute. Why is this happening? When using Trackball Alert Pro the patch option says compatible rom not found but the alerts are working fine When using wi-fi hotspot and default options, it is not getting turned on although 3G shows in the top left corner. Do I have manually change any settings.
I would be highly grateful if anyone can resolve all or any of my queries. I am absolutely exhausted in asking these queries in the official thread and reading through tons of pages just to see my query being buried.
Thanks in advance guys.
Alright guys I managed to install 1.14.1 successfully by doing a full wipe first using instructions from this fabulous thread http://forum.xda-developers.com/showthread.php?t=747381 Although this thread is for myTouch 3G Slide, the basic instructions are the same for Nexus One. You just have to use the trackball to select an option. This is exactly what I was looking for I am sure many newbies like me who don't know what a full wipe is, will learn a lot from this magnificent thread. Thank you kingofyo1
Now I still don't understand why the patch option in Trackball Alert Pro shows the rom is not compatible even though basic version is officially provided with the rom. Anyway the alerts work, so I am not going to waste any more time on it.
Even in eViL-Q&D-NXSense-v.1.14.1, when I first open market, my GPRS connection disappears and comes back in like 20-30 seconds. After that market works really well. Anyone has a solution for this?
Also Wi-Fi hotspot still doesn't turn on using default settings. Do I have to manually choose any settings?
Can anyone shed some light on the above mentioned questions?

Htc hd 7 big problem

my hd7 works fine but every 10-20mins of using it reboots and stucks. i must pull out battery several times and then it will start... i did try to replace software but it keep displaying error on 6% error name is: ERROR [226] FLASH WRITE
i did also try 2-3 more but same problem every time
i used this software last but same problem also with this one...
http://forum.xda-developers.com/showthread.php?t=1268171
plz help meee... i cant figure it out and fix it...
Kenannp said:
my hd7 works fine but every 10-20mins of using it reboots and stucks. i must pull out battery several times and then it will start... i did try to replace software but it keep displaying error on 6% error name is: ERROR [226] FLASH WRITE
i did also try 2-3 more but same problem every time
i used this software last but same problem also with this one...
http://forum.xda-developers.com/showthread.php?t=1268171
plz help meee... i cant figure it out and fix it...
Click to expand...
Click to collapse
Have you tried a different radio with said rom?
Have you tried other roms? I havent tried the TouchIt rom yet. Im running DeepShining Mango anf it works just fine. What program are you using to flash the rom?
Swapout memory...
My HTC HUB wasnt working. I deleted it and tried to reinstall, but marketplace says - cant get info, check back later. And I dont have a XAP file
FTP4 said:
My HTC HUB wasnt working. I deleted it and tried to reinstall, but marketplace says - cant get info, check back later. And I dont have a XAP file
Click to expand...
Click to collapse
HTC Hub can only be downloaded over WiFi.
I got newest version of it. Now it sucks and Im going for Android or Mango ROM
Kenannp said:
my hd7 works fine but every 10-20mins of using it reboots and stucks. i must pull out battery several times and then it will start... i did try to replace software but it keep displaying error on 6% error name is: ERROR [226] FLASH WRITE
i did also try 2-3 more but same problem every time
i used this software last but same problem also with this one...
http://forum.xda-developers.com/showthread.php?t=1268171
plz help meee... i cant figure it out and fix it...
Click to expand...
Click to collapse
dont want to be a pessimist but it happens to me too and i need to send it for repair. i hope you have more luck...

[Q] Bootloop Motorola Logo

What my mother did with her Milestone I don't know but everytime I try to boot it, it loops on the Motorola logo. I've tried several things already to fix it but I really need help here.
I've installed open recovery, tried to flash several sbf-files but afterwarrds it keeps rebooting. Last I tried to put on CM6 through apply update in OR but still no succes. So please give me some advice on how to fix this problem.
Kind regards.
Nobody? I just flashed Central Europe sbf-file SHOLS_U2_05.26.3_SIGNED_UCASHLSMR2EMEAB1B806E.0R_PDS003_UCAMS1FRYOQWRTEU_P013_A006_HWp2a_WIG145231_1FF again (since I live in Belgium I believe this is the one) afterwards go into stock recovery and do a factory reset but still cannot boot. I get the white motorola logo and afterwards it reboots.
Anybody some ideas please? Might there be a hardware problem? My mother says she was taking a picture when the Milestone (type MVQ7-334411A11) rebooted and kept on rebooting. Please give me some advice.
Same here
Hi!
I seem to have the same exact problem with my friends phone.
Things i've done:
-Installed several different sbf's. All they do is boot-loop.finally installed GOT_RTEU_2_2_1FULL and that does the same but i thought i'd do other tweaking with that firmware.
-Installed OR 2.01 which starts up nicely. Tried flushing caches and stuff...
-Got a tip that the pds-partition might be malfunctioning, but i can see the files there just fine from shell and backed them up to the memorycard. Although i dont really have idea that if there some files missing from there.
files that are there follows:
pds/
pds/public/
pds/public/batt_offset_data
pds/public/batt_tuning_data
pds/public/tcxo.bin
pds/public/batt_phasing_data
pds/comm_drv/
pds/comm_drv/mmins_settings.cfg_temp
pds/comm_drv/mmins_settings.cfg
pds/comm_drv/ms_log_control.cfg
pds/comm_drv/cat_log_control.cfg
pds/comm_drv/opprof.txt
pds/wifi/
pds/wifi/nvs_map.bin
pds/opprof/
pds/security/
pds/scim/
pds/lost+found/
pds/bp_nvm/
pds/bp_nvm/File_PDS_Subsidy_Lock
pds/bp_nvm/NVM_Daemon_MD5
pds/bp_nvm/FILE_PDS_SUBSIDY_LOCK_DBK_2
pds/bp_nvm/FILE_PDS_SUBSIDY_LOCK_DBK_1
pds/bp_nvm/File_PDS_SBCM
pds/bp_nvm/File_PDS_IMEI
pds/bp_nvm/FILE_PDS5
pds/bp_nvm/File_PDS4
pds/bp_nvm/File_PDS3
pds/bp_nvm/File_PDS2
pds/bp_nvm/File_PDS1
-i've also tried to get something started that would start bootlogging so i could see what's happening. No luck with that.
typing in shell:
echo 1 > /data/property/persist.service.aplogd.enable
doesn't work. but i think i need CM7 firmware for that?
Well...I'm a bit out of ideas now. You guys have any?
-T

Categories

Resources