Database Develop

Connection Problems

Before i decided to flash a new rom i had been having issues with my phone getting, and staying connected. At first to just data connections, ie 3G. So i decided to try a cooked rom for the first time.
But since then i've had even more troubles getting my phone connected and keeping it connected. Ive been through Hyperdragon III Opal, Dutys latest rom, and now im on the latest AT&T rom, and still im having troubles. Ive hand entered in the Media net connection info so many times ive got it memorized, ive even tried cabs, turning proxy on or off, and just plaing letting it sit for a while. It seems as though every time i try something new it might for a second but next thing i know i lose connection and can't get it again without restarting my phone.
If it helps im currently using HardSPL 3.56, and my phone is running the AT&T ROM version 3.57.502.2 WWE and radio 1.65.21.18
This is a very urgent issue for me as in my job i use my phones internet almost daily.

Ok for a while there with the stock AT&T rom it was working just fine. I went to start adding in a few cabs and it was like my phone once again decided to hate me.
Im not trying shogunmarks DeathV4.1 and have NotATreoFans AT&T v3.2.5 Loaded downloading in case the other doesn't work. I don't even really care about having a really awesome cooked rom, working is about all i am after right now.
UPDATE: Tried both of those ROMs to no effect. ive now broke down and rolled back to the original ROM and SPL that came on my phone when i bought it from the store. I pray this at least gets it working long enough for the Touch Pro to come out and me to get enough money to buy one out of contract. Still if anyone has any ideas im all ears.

Ok i hate adding a new reply or bumping this but now things are getting desperate. I have been through checked and changed every setting, tried everything. now its not just data, the phone itself wont work as a phone. Calls wont go out or come in. If someone trys calling my phone it never goes through, it wont even go to voice mail. This makes no sense at all.

All that comes to mind at this point is a defective phone. If you bought the phone new, then it has a 1 year warranty on it, and AT&T will replace it for you. If it's been less than 30 days, then just box it up and go to an AT&T store for a full exchange.

EvansLight said:
Ok i hate adding a new reply or bumping this but now things are getting desperate. I have been through checked and changed every setting, tried everything. now its not just data, the phone itself wont work as a phone. Calls wont go out or come in. If someone trys calling my phone it never goes through, it wont even go to voice mail. This makes no sense at all.
Click to expand...
Click to collapse
Set the phone band to GSM manually and see if you can make phone calls. If that works then search for 3G problems. There are a lot of bad devices which suffer 3G not working.

Connection Settings
How did you set-up your data connection? Manually or automatic config?

NotATreoFan said:
All that comes to mind at this point is a defective phone. If you bought the phone new, then it has a 1 year warranty on it, and AT&T will replace it for you. If it's been less than 30 days, then just box it up and go to an AT&T store for a full exchange.
Click to expand...
Click to collapse
See this is what i was hoping for, it still being under warranty. I guess ill be calling AT&T today about it. Thank god i got 2 old phones standing by for times like this.
sys50000 said:
Set the phone band to GSM manually and see if you can make phone calls. If that works then search for 3G problems. There are a lot of bad devices which suffer 3G not working.
Click to expand...
Click to collapse
Yea i downloaded BandSwitch last night on a hunch it was just 3G, and low and behold my phone works fine on EDGE. I can make calls, and get the data connection working.
balsack said:
How did you set-up your data connection? Manually or automatic config?
Click to expand...
Click to collapse
I have tried doing it all by hand, cabs, and even the auto connection wizard. As i discovered last night it wasn't my settings but 3G just not working at all.
Thanks everyone
UPDATE: I called support after rolling my phone back to its original shipped ROM and SPL, and man did the guy at the call center almost crap when he heard how early of a ROM i was using. He said i have to install the newest update first then if its still borken (considering ive had the newest one on here before, i already know the answer to that) that they will send me a new one since im still in my warranty period Yea for customer support

Running on Virgin Mobile - Sprint Activation Problems

Hey Guys,
I'm really liking my first Android phone, but am having a heck of time working out the kinks. Phone calls and text work. Here's a list and if anyone can help out with any of them, I'd really appreciate it.
1. The phone constantly tries to do Sprint Auto-Activation. I *believe* this is causing the GUI to crash constantly...I've tried three ROMs and none run very stable. Is there a way to disable that pesky auto-activate?
2. I need data settings for Virgin or Boost. Coming from an iPhone, I don't see a setting for an APN anywhere. I think I have the settings, but I'm not sure I'm putting them in the right place.
3. Is there a special ROM I should install since I'm not on Sprint? I'm surprised there aren't more Verizon ROMs around.
Please help with any suggestions.

Realized this should probably be in the "General" instead....

bond00 said:
Hey Guys,
I'm really liking my first Android phone, but am having a heck of time working out the kinks. Phone calls and text work. Here's a list and if anyone can help out with any of them, I'd really appreciate it.
1. The phone constantly tries to do Sprint Auto-Activation. I *believe* this is causing the GUI to crash constantly...I've tried three ROMs and none run very stable. Is there a way to disable that pesky auto-activate?
2. I need data settings for Virgin or Boost. Coming from an iPhone, I don't see a setting for an APN anywhere. I think I have the settings, but I'm not sure I'm putting them in the right place.
3. Is there a special ROM I should install since I'm not on Sprint? I'm surprised there aren't more Verizon ROMs around.
Please help with any suggestions.
Click to expand...
Click to collapse
So your on virginmobile but with a cdma hero? Awesome to get to the apn settings just hold the green call button down till you get the voice dial or just do it from your menu. When it comes up say, "open apns". It will take you to the apns. Are you rooted? Also to get the phone to stop doing that pesky

Thanks for the help. I'm working on the APN stuff now. I think your last post got cut short. I'd really like to know how to disable to auto-activate crap. I'm also getting invalid username/password, but I'm sure thats just becuase its trying to log into Sprint.

So u can use sprint phones on virgin mobile? please how do u do this..that 25 buck plan looks to good to pass up.. How would i say use my hero on virgin mobile..

I'm only able to place calls and text. NO DATA which is driving me nuts. I need the APN/Data settings for VM, but no one seems to have them.
And my phone keeps trying to do Sprint auto-activation, which is also driving me nuts. And I keep getting GUI crashes no matter which ROM I use. So far the process has been anything but smooth.
Does anyone have ideas on disabling Sprint auto-activation? Thanks!

I'm only able to place calls and text. NO DATA which is driving me nuts. I need the APN/Data settings for VM, but no one seems to have them.
And my phone keeps trying to do Sprint auto-activation, which is also driving me nuts. And I keep getting GUI crashes no matter which ROM I use. So far the process has been anything but smooth.
Does anyone have ideas on disabling Sprint auto-activation? Thanks!
Click to expand...
Click to collapse
Have you tried using the bitter r sweet Rom or what ever its called for non Sprint heros?
-------------------------------------
Sent via the XDA Tapatalk App

bond00 said:
I'm only able to place calls and text. NO DATA which is driving me nuts. I need the APN/Data settings for VM, but no one seems to have them.
And my phone keeps trying to do Sprint auto-activation, which is also driving me nuts. And I keep getting GUI crashes no matter which ROM I use. So far the process has been anything but smooth.
Does anyone have ideas on disabling Sprint auto-activation? Thanks!
Click to expand...
Click to collapse
I knows this isn't much help but do a search for cricket. I saw a way earlier just gotta find it cuz i'm not doing anything i'll look to ..... try this enter ##data# then hit edit enter your msl then turn off vocoder. Also hit menu then commit changes

I'm pretty sure I seen an APK in the phone somewhere that was related to the over the air activation stuff... might wanna look for it.
I could be wrong, that may be for the Moment, but that's Android on Sprint too so I dont see why the Sprint Hero would be different.

I too am really interested in putting my Hero on Virgin Mobile US. Has anyone figured out the data settings for wap/apn and whatever else is needed? If not, if one were to purchase a cheap virgin phone, say a jax, could the information be taken from there?
Also, would it be necessary to use a non-sprint ROM since virgin mobile runs on the Sprint network???? Thanks for any help.

Ok, I tried the BitterSweet and the nags went away and everything is running smooth on my Hero...I'm really liking it. Just no DATA. I'm still waiting on settings from someone. I tried VM tech support and they didn't even know what an APN was...seriously.
Yes, you can buy a cheap $10 Virgin Mobile phone and use those "settings" for the Hero. That's all I'll say about that.

bond00 said:
Yes, you can buy a cheap $10 Virgin Mobile phone and use those "settings" for the Hero. That's all I'll say about that.
Click to expand...
Click to collapse
Lol, not asking about that one setting. I already knew that part, I mean if someone were to buy a cheap phone would they be able to get all the settings, apn/wap and so on from it. If so, which phone, and what else would be needed?

jlem26 said:
I too am really interested in putting my Hero on Virgin Mobile US. Has anyone figured out the data settings for wap/apn and whatever else is needed? If not, if one were to purchase a cheap virgin phone, say a jax, could the information be taken from there?
Also, would it be necessary to use a non-sprint ROM since virgin mobile runs on the Sprint network???? Thanks for any help.
Click to expand...
Click to collapse
can program your apns in by holding down the green call button and saying "open apns" also try pushing ##data# and you'll get a menu with data and mms stuff. Another note I've been doing some research to avoid the overpriced $75 dollars to get the phone flashed to metropcs and (two things) one they say they've rooted the hero. Two they say that for a normal flash all they do is change the prl.

I've accessed the ##DATA# and APN menus, but I have no idea what to change them to. I've also looked into PRLs but I can't seem to find one for Virgin. I know they just use the Sprint network so wouldn't the PRL be the same?
If anyone is really interested in using the Hero on Virgin, Boost, or Cricket PM me. I searched the internet for hours finding all the info and I don't mind helping someone else out. The more people we get working on this, the more likely we are to figure these settings out.

bond00 said:
I've accessed the ##DATA# and APN menus, but I have no idea what to change them to. I've also looked into PRLs but I can't seem to find one for Virgin. I know they just use the Sprint network so wouldn't the PRL be the same?
If anyone is really interested in using the Hero on Virgin, Boost, or Cricket PM me. I searched the internet for hours finding all the info and I don't mind helping someone else out. The more people we get working on this, the more likely we are to figure these settings out.
Click to expand...
Click to collapse
**** I'm trying to get it to work on metro. My main thing right now is to stop it from doing the hands free activation. I know we have slightly separate goals but that is something we could work on together. What you really need is for the op of this thread to send you his prl.

I got rid of the Sprint Auto-Activation by installing BitterSweets ROM. It's working great so far.

bond00 said:
I got rid of the Sprint Auto-Activation by installing BitterSweets ROM. It's working great so far.
Click to expand...
Click to collapse
Unfortunately for me the phone I wanna do this on is a nonrooted phone. I did find a good really good explanation here

Just realized you were the op can you upload your prl for others? A full nandroid would be awesome

The PRL I'm using is the standard one that comes with the Hero. I haven't changed it. I can upload it, but it should be one everyone has by default on Sprint. I forget the version...

bond00 said:
The PRL I'm using is the standard one that comes with the Hero. I haven't changed it. I can upload it, but it should be one everyone has by default on Sprint. I forget the version...
Click to expand...
Click to collapse
okay if it's 60665 or 60664 don't worry about it thanks though

Getting an Evo

Just to let you know I'm not but I'm getting my wife an Evo 12/1
So.... here is the question. After I get the Evo for my wife, I'm going to give the Hero to my mother-in-law(She has the LG Rumor, no upgrade till 10/1/11 but she can switch to a used "new" phone). My wife has the Hero, rooted, running CM6. When they deactivate the Hero and activate the Evo, should I run the ruu on the Hero before deactivation back to 2.......5 and set the phone back to stock or can I run a Sense rom and Sprint will activate the Hero for my mother-in-law while still being rooted? Any help would be much appreciated!

whenever I mess with activations or anything like that, you know, network side stuff...I like to have an official rom on there. That way everything goes smoothly. More often than not, Sprint cant activate or the devices wont activate with a custom rom...
so thats me, ill always run an official when activating or esn swaps.

Thanks for the response. Getting the phone for her as a surprise, can I still run the ruu after the phone is deactivated? Or should I run the ruu before deactivation Tuesday night?
Sent from my HERO200 using XDA App

You can do it either way. It'll still install.

Thanks for the help, I'll run the ruu after deactivation!!

no data or MMS

A few months back i did my first Android experimenting with my girlfriends Sprint HTC Hero she wasn't using anymore, because we switch her over to a Palm Pre. So I took the Hero she wasnt using anymore, rooted it and updated it to CM6.0.0. Of course it didn't have service and everything I was doing was over wifi at that time. Well, her Palm Pre jacked up on her so we had to pull the Hero out and put her back on it. We got her switched over to the Hero on the website. She can make and receive calls fine and receive and send text fine, but cant send or receive MMS or transfer any data. Browser just says no connection. I saw on another thread, something about updating profile and/or prl under settings but I dont have that and i guess because i dont have Sense. Is there something i can do or am i going to have to install a new ROM? if i have to do another ROM, what do i need to install? i have done alot of stuff with Windows Mobile and GSM over the years, but i'm not too savvy on Android and CDMA.

leoingle said:
A few months back i did my first Android experimenting with my girlfriends Sprint HTC Hero she wasn't using anymore, because we switch her over to a Palm Pre. So I took the Hero she wasnt using anymore, rooted it and updated it to CM6.0.0. Of course it didn't have service and everything I was doing was over wifi at that time. Well, her Palm Pre jacked up on her so we had to pull the Hero out and put her back on it. We got her switched over to the Hero on the website. She can make and receive calls fine and receive and send text fine, but cant send or receive MMS or transfer any data. Browser just says no connection. I saw on another thread, something about updating profile and/or prl under settings but I dont have that and i guess because i dont have Sense. Is there something i can do or am i going to have to install a new ROM? if i have to do another ROM, what do i need to install? i have done alot of stuff with Windows Mobile and GSM over the years, but i'm not too savvy on Android and CDMA.
Click to expand...
Click to collapse
Try flashing a different rom. If you have the correct data plan which I'm guessing you do and a different rom doesn't help ruu that ***** it'll return all your settings and then update prl and then profile.

Dangers Of Messing With Your Phone

Hello, everyone, I'd like to share my experience, get any help if someone can, and warn some future people.
So a few months ago i rooted and ROM swapped my HTC one. It was great, I loved it, it was fast and simple.
I tried to change the ROM on it the other day and everything went down hill form there. Basically I ended up having no service and everything else seeming to work fine. So after spending an entire day trying to fix it with BD619, i had to call my carrier today. Now i have the sprint phones, and the sprint service, but i have Credo as a carrier. God knows why. They essentially gave me nothing saying my phone must be bricked and they can't help me.
One thing they did try however was to have me put in a ##xxxxx# number, and there i saw and could edit my MDN and MSID, instead of showing my my phone number and the MSID number they both had "No" written. So he had me edit it and put it in, but when i click "commit changes" it said "commit failed" so if anyone knows anything about that or could help me there, it'd greatly appreciated.
Lesson is, even if you think you know what you are doing, and are careful, weird stuff can happen, and if you have an Odd carrier version of an already less support model of phone (the sprint version), then be EXTRA careful.

Kdenery said:
Hello, everyone, I'd like to share my experience, get any help if someone can, and warn some future people.
So a few months ago i rooted and ROM swapped my HTC one. It was great, I loved it, it was fast and simple.
I tried to change the ROM on it the other day and everything went down hill form there. Basically I ended up having no service and everything else seeming to work fine. So after spending an entire day trying to fix it with BD619, i had to call my carrier today. Now i have the sprint phones, and the sprint service, but i have Credo as a carrier. God knows why. They essentially gave me nothing saying my phone must be bricked and they can't help me.
One thing they did try however was to have me put in a ##xxxxx# number, and there i saw and could edit my MDN and MSID, instead of showing my my phone number and the MSID number they both had "No" written. So he had me edit it and put it in, but when i click "commit changes" it said "commit failed" so if anyone knows anything about that or could help me there, it'd greatly appreciated.
Lesson is, even if you think you know what you are doing, and are careful, weird stuff can happen, and if you have an Odd carrier version of an already less support model of phone (the sprint version), then be EXTRA careful.
Click to expand...
Click to collapse
Have you tried simply running the latest RUU and reverting it back to stock?
**edit** http://www.htc.com/us/support/news.aspx?p_id=629&p_name=htc-one-sprint

Kraizk said:
Have you tried simply running the latest RUU and reverting it back to stock?
**edit** http://www.htc.com/us/support/news.aspx?p_id=629&p_name=htc-one-sprint
Click to expand...
Click to collapse
Yes, twice

This is not an uncommon problem but it happens with certain HTC ones and not others. I have helped a few other people with this issue. Most likely, your current ROM is set to RUIN/SIM in Settings-> More-> Mobile Network -> Subscription settings. It needs to be set to NV. If you can't get to this setting, you need to flash a ROM that has the setting available. CM 10 based ROMs all seem to have it. If your phone does not automatically reactivate, you can flash to a stock ROM and use the handsfree activation function and that should get you back up.

jamesissocool said:
This is not an uncommon problem but it happens with certain HTC ones and not others. I have helped a few other people with this issue. Most likely, your current ROM is set to RUIN/SIM in Settings-> More-> Mobile Network -> Subscription settings. It needs to be set to NV. If you can't get to this setting, you need to flash a ROM that has the setting available. CM 10 based ROMs all seem to have it. If your phone does not automatically reactivate, you can flash to a stock ROM and use the handsfree activation function and that should get you back up.
Click to expand...
Click to collapse
I'm going to try this now thanks

jamesissocool said:
This is not an uncommon problem but it happens with certain HTC ones and not others. I have helped a few other people with this issue. Most likely, your current ROM is set to RUIN/SIM in Settings-> More-> Mobile Network -> Subscription settings. It needs to be set to NV. If you can't get to this setting, you need to flash a ROM that has the setting available. CM 10 based ROMs all seem to have it. If your phone does not automatically reactivate, you can flash to a stock ROM and use the handsfree activation function and that should get you back up.
Click to expand...
Click to collapse
Okay so i just flashed a CM 11 build. and Holy S*** I have ******* service! I cant make calls, it says it's not authorized. And i don't see the option you were talking about, in mobile network, i see , Data Enables, Data Roaming, Preferred Network type, System select, (then grayed out) Access Point Names and Network operators, (then not grayed out) carrier settings. When i click carrier settings it says "Unfortunately, the process com.android.phone has stopped. and it takes me back a screen.
where do i go from here?

Kdenery said:
Okay so i just flashed a CM 11 build. and Holy S*** I have ******* service! I cant make calls, it says it's not authorized. And i don't see the option you were talking about, in mobile network, i see , Data Enables, Data Roaming, Preferred Network type, System select, (then grayed out) Access Point Names and Network operators, (then not grayed out) carrier settings. When i click carrier settings it says "Unfortunately, the process com.android.phone has stopped. and it takes me back a screen.
where do i go from here?
Click to expand...
Click to collapse
Try flashing a CM10 ROM. I've always seen the option there. The kitkat ROMs I have used do not have the option except for the Nocs GE.

Kdenery said:
Hello, everyone, I'd like to share my experience, get any help if someone can, and warn some future people.
So a few months ago i rooted and ROM swapped my HTC one. It was great, I loved it, it was fast and simple.
I tried to change the ROM on it the other day and everything went down hill form there. Basically I ended up having no service and everything else seeming to work fine. So after spending an entire day trying to fix it with BD619, i had to call my carrier today. Now i have the sprint phones, and the sprint service, but i have Credo as a carrier. God knows why. They essentially gave me nothing saying my phone must be bricked and they can't help me.
One thing they did try however was to have me put in a ##xxxxx# number, and there i saw and could edit my MDN and MSID, instead of showing my my phone number and the MSID number they both had "No" written. So he had me edit it and put it in, but when i click "commit changes" it said "commit failed" so if anyone knows anything about that or could help me there, it'd greatly appreciated.
Lesson is, even if you think you know what you are doing, and are careful, weird stuff can happen, and if you have an Odd carrier version of an already less support model of phone (the sprint version), then be EXTRA careful.
Click to expand...
Click to collapse
The only way something like this happens is one of two things.....
1. Ur a noob
2. Your a dev and your testing ril on your rom
The only way to fix this which is a cleared meid of some sort......flashing cm10.1 is the only way and aquiring service by switching to nv....once there everything is fixed just flash/restore back to your rom.
Sent from my HTCONE using Tapatalk

-TheEdge- said:
The only way something like this happens is one of two things.....
1. Ur a noob
2. Your a dev and your testing ril on your rom
The only way to fix this which is a cleared meid of some sort......flashing cm10.1 is the only way and aquiring service by switching to nv....once there everything is fixed just flash/restore back to your rom.
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
i'd kinda like to argue a point here as this just happened to me. i am certainly not new to flashing, starting back with the mogul and having almost every sprint smart phone since then unlocked (windows) or rooted (webos and android).
Using TWRP and previously running ecliptic 4.3 i wiped caches, system and data then installed the 4.4.2 from team d3rp and voila... no service no meid no nothing.... yes i have the latest radio on my phone.
i guess my point in this is that there's a number 3 that you didn't mention.
3. sh!t happens and it's not n00b related.
for anyone else that has this issue... flashing CM 10.1 worked for me. i didn't even have to set up anything, it just picked up signal. so i rebooted, wiped and nandroided back to 4.3 and all is well.

Did you flash a rom that was meant for another carrier?
Sent from my SM-N900P using XDA Premium 4 mobile app

Robert542 said:
Did you flash a rom that was meant for another carrier?
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I didn't... it was SuperOneK. i'm certainly not blaming the rom though. especially not when others are flashing it fine. the ONLY thing i can think of possibly happening is a bad download. I was in a rush and didn't check the md5.

I had a similar problem when flashing miui. Nothing worked. Even went back to a sense backup and nothing worked.
Commit failed as well.
Here's what I did to make it work again.
Flashed cm10. Change the network settings for CDMA. (Boom it SAID I had service..but didn't).
Rebooted a few times (probably not necessary).
Flashed a sense 4.3 ROM that was close to stock.
Update msl and all that. Commit.
For me..changed LTE/CDMA to just CDMA (no 4g in wv).
Boom it worked again. Hope this helps!
Sent from my HTCONE using xda app-developers app