How to get flash on hero running FROYO 2.2? - Hero CDMA Q&A, Help & Troubleshooting

does anybody know how to get 10.1 flash to run on froyo 2.2 for the hero i been trying to get flash to work on my 2.1 and my 2.2 and still have not got it to work any solutions?

humm I have always been able to run most flash videos with 2.1. Its the lite player however I dont think a full mobile version for android has been released just yet.

I want 2.2 but with out flash im stickn to dc..hope this thread incourages darchstar

Check out nfinitefx's Rom (2.1) he has flash almost completely working....
Sent from my HERO200

Related

Downgrading to Eclair with 2708?

I've been using Biffmod 2.1 on my G1 for a couple days, including the upgrade to the 2708 radio. But I'm just not happy with the speed. I'm assuming if I roll back to Eclair, the speed will be better. But do I have to downgrade my radio too, or can I flash an Eclair ROM, then flash a 2708 kernel on top of it?
Why not try an updated Biffmod 2.1, or one of the ota 2.2.1 roms first? Ezterry's OTA and Froyo4trout are pretty fast.
As for downgrading, I don't see why the universal kernel patch wouldnt work, but I'm not sure.
you can just flash the eclair rom over your exisiting rom(wipe first ofc then flash preferred eclair rom, universal kernal patch, then firerats spoof spl.)
d12unk13astard said:
you can just flash the eclair rom over your exisiting rom(wipe first ofc then flash preferred eclair rom, universal kernal patch, then firerats spoof spl.)
Click to expand...
Click to collapse
Is the flashing of a new radio and SPL actually necessary? When I had a g1 I frequently switched between cupcake, donut, eclair, AND froyo ROMs. I never had to flash a new radio or SPL between ROMs. Just do a wipe between flashing roms, especially between firmware versions (what I mean by that is you should do a full wipe, cache, dalvik cache, and all betweem different versions of android, such as 1.6 to 2.1 or 2.1 to 2.2, etc.)
Ya, that's right. The radio shouldn't make a difference in the rom once you flash the kernel patch. I just didn't see that much of a speed difference between froyo and eclair. If you wanted a speed boost, donut would be your best bet. Its the fastest on these old phones.
Sent from my T-Mobile G1 using XDA App
Bigt2003 said:
Ya, that's right. The radio shouldn't make a difference in the rom once you flash the kernel patch. I just didn't see that much of a speed difference between froyo and eclair. If you wanted a speed boost, donut would be your best bet. Its the fastest on these old phones.
Sent from my T-Mobile G1 using XDA App
Click to expand...
Click to collapse
I think eclair was probably worse than froyo since it was a port from the nexus one if I remember correctly. Google included the g1 drivers in the source code for froyo, so it was a straight up AOSP build, no porting necessary.

Voodo/Sppedmod On xwjv1

Hi all i just flashed my galaxy s to xwjv1 Gingerbread.
i would like to install /voodo/speedmod/CWM kernal
I have trtied with the latest speeedmod odbin package but after install it wont boot! have to flash pda again!
How can i get a hacked kernal on this rom?
You can't run a froyo kernel on gingerbread. Look for supercurio's hacking gingerbread kernel for fun thread if you want a custom kernel.
Until samsung releases gingerbread sources, probably close to official release, true custom kernels won't be possible.
For now, i'd stick with js froyo roms.
Sent from xda premium app on i9000m.
Thanks Got it rooted thats all i need anyways as Ginderbread runs good without lagfix! Even bat life is good with standerd modem!!!
Cant wait for the offical rom will make the phone even faster!

Can I install CM7 on 2.1 kernel?

Hi guys, another newbie question from me
Correct me if I'm wrong, but if I flash a v2.1 SBF, then the kernel will also be flashed to v2.1 as well right?
Ok, so we also have a variety of custom roms. Some are based on v2.2 kernel, while some are for v2.1.
Now my question is, I know that CM7 is based on v2.2 kernel. Currently, I'm using a stock v2.1 SBF, so the kernel is also v2.1 as well. I want to know that despite this, can I still flash CM7 custom rom (which again is based on v2.2 kernel) on my phone? Or can I only flash a CM6 custom rom that is based on v2.1 kernel?
chaoscreater said:
Hi guys, another newbie question from me
Correct me if I'm wrong, but if I flash a v2.1 SBF, then the kernel will also be flashed to v2.1 as well right?
Ok, so we also have a variety of custom roms. Some are based on v2.2 kernel, while some are for v2.1.
Now my question is, I know that CM7 is based on v2.2 kernel. Currently, I'm using a stock v2.1 SBF, so the kernel is also v2.1 as well. I want to know that despite this, can I still flash CM7 custom rom (which again is based on v2.2 kernel) on my phone? Or can I only flash a CM6 custom rom that is based on v2.1 kernel?
Click to expand...
Click to collapse
Are you rooted on stock 2.1? Even CM6 is on the 2.2.1 kernel, so you would have to flash the 2.2 Vulnerable Recovery and then reroot, if I'm not mistaken.
Sent from my Milestone using XDA Premium App
i think you can flash CM7 (if you editing rom)
XT720 use milestone's rom on 29 kernel
chaoscreater said:
Hi guys, another newbie question from me
Correct me if I'm wrong, but if I flash a v2.1 SBF, then the kernel will also be flashed to v2.1 as well right?
Ok, so we also have a variety of custom roms. Some are based on v2.2 kernel, while some are for v2.1.
Now my question is, I know that CM7 is based on v2.2 kernel. Currently, I'm using a stock v2.1 SBF, so the kernel is also v2.1 as well. I want to know that despite this, can I still flash CM7 custom rom (which again is based on v2.2 kernel) on my phone? Or can I only flash a CM6 custom rom that is based on v2.1 kernel?
Click to expand...
Click to collapse
your kernel will update after install the CM7, because CM7 contain the new 2.2 kernel, you can flash CM7 directly, but remember to flash the BPSW update.
skadude66 said:
Are you rooted on stock 2.1? Even CM6 is on the 2.2.1 kernel, so you would have to flash the 2.2 Vulnerable Recovery and then reroot, if I'm not mistaken.
Sent from my Milestone using XDA Premium App
Click to expand...
Click to collapse
Yes i'm rooted on stock 2.1. Initially, I couldn't get into OpenRecovery after flashing the stock 2.1 SBF, whereas I could when I was on stock 2.2. I did some searching and found this:
http://android.doshaska.net/rootable
and flashed the vulnerable recovery and now everything works fine. I got my phone rooted and currently using the TelusLite v5.2 for Eclair. However, i'm not sure if the vulnerable recovery is the 2.2 or not, i'm guessing it is?
Charles_l said:
your kernel will update after install the CM7, because CM7 contain the new 2.2 kernel, you can flash CM7 directly, but remember to flash the BPSW update.
Click to expand...
Click to collapse
Ok now i'm confused. From what I know, the bootloader for Motorola devices like the Milestone is locked. Therefore, we can't properly flash a custom rom on the phone, and we can't flash a different kernel either (which is why if you try to change one of the settings that relate to the kernel in OpenRecovery, you'll brick your phone).
So I've always thought that only flashing a stock SBF will change the kernel, and that the custom roms will rely on the stock kernel, hence why there're custom roms for different Android versions, like Eclair and Froyo? So ya i'm a little bit confused here.
Also, what's the BPSW update? What does it stand for and is that included in the CM7 custom rom topic? I couldn't find it and Google didn't find anything either.....
chaoscreater said:
Yes i'm rooted on stock 2.1. Initially, I couldn't get into OpenRecovery after flashing the stock 2.1 SBF, whereas I could when I was on stock 2.2. I did some searching and found this:
http://android.doshaska.net/rootable
and flashed the vulnerable recovery and now everything works fine. I got my phone rooted and currently using the TelusLite v5.2 for Eclair. However, i'm not sure if the vulnerable recovery is the 2.2 or not, i'm guessing it is?
Ok now i'm confused. From what I know, the bootloader for Motorola devices like the Milestone is locked. Therefore, we can't properly flash a custom rom on the phone, and we can't flash a different kernel either (which is why if you try to change one of the settings that relate to the kernel in OpenRecovery, you'll brick your phone).
So I've always thought that only flashing a stock SBF will change the kernel, and that the custom roms will rely on the stock kernel, hence why there're custom roms for different Android versions, like Eclair and Froyo? So ya i'm a little bit confused here.
Also, what's the BPSW update? What does it stand for and is that included in the CM7 custom rom topic? I couldn't find it and Google didn't find anything either.....
Oh and one more thing, I think this is a bug so can someone look into it? The statusbar hides itself and to unhide it, you have to ADWSettings (press the Menu capacitive button, in between the back and home button, and then click More, then choose ADWSettings).
Then, click on System preferences, and the first option is "Hide Statusbar".
The problem is, that option is by default already un-ticked, which means it does NOT hide your statusbar. And yet, the statusbar is hidden........the only way to fix this is to enable the option so that it actually hides it, then close everything and go back to your desktop, and then open ADWSettings again and then un-tick it. This will fix it and make the statusbar appear.
However, if you move your shortcuts/icons on the desktop around, or if you move it to the Trash, then this will undo the statusbar change and will make it hide again. So then you'll have to do this constantly, so I suggest you guys make sure your desktop shortcuts are fully configured, and then make the statusbar change at the end.
Click to expand...
Click to collapse
Yes, VR is based on 2.2.
sorry, what does VR stand for? And I still don't understand it, can you please explain?
chaoscreater said:
sorry, what does VR stand for? And I still don't understand it, can you please explain?
Click to expand...
Click to collapse
VR is vulnerable recovery, it's what is on android.doshaska.net/rootable
ahh I see......but I still don't understand the part about the kernel.
I thought that every new firmware version update will use a newer version of the kernel? If yes, then how can custom roms like CM7 that requires kernel for v2.2, be installed on stock v2.1? Unless both the v2.1 and v2.2 stock SBF use the same kernel version? But then again, why are there specific roms for Eclair and Froyo? If you look at this topic here:
http://forum.xda-developers.com/showthread.php?t=966812
the OP says that some of those roms might not work because of different kernels. So it leads me to believe that if you're on stock v2.1, then the kernel is different than if you're on stock v2.2, hence why the custom roms you can install are separated by Eclair and Froyo......
And lastly, if custom roms like CM7 will install the v2.2 kernel, shouldn't that require the bootloader to be unlocked?? I thought we can't change the kernel yet? I'm confused....
chaoscreater said:
ahh I see......but I still don't understand the part about the kernel.
I thought that every new firmware version update will use a newer version of the kernel? If yes, then how can custom roms like CM7 that requires kernel for v2.2, be installed on stock v2.1? Unless both the v2.1 and v2.2 stock SBF use the same kernel version? But then again, why are there specific roms for Eclair and Froyo? If you look at this topic here:
http://forum.xda-developers.com/showthread.php?t=966812
the OP says that some of those roms might not work because of different kernels. So it leads me to believe that if you're on stock v2.1, then the kernel is different than if you're on stock v2.2, hence why the custom roms you can install are separated by Eclair and Froyo......
And lastly, if custom roms like CM7 will install the v2.2 kernel, shouldn't that require the bootloader to be unlocked?? I thought we can't change the kernel yet? I'm confused....
Click to expand...
Click to collapse
What you're confusing is that the version of android such as 2.2 is NOT the Kernel. The only way for you to change the kernel per se is to flash an sbf such as the Eclair or Froyo sbf. These are signed by Motorola and have holes in the code that have been exploited so we can flash Custom ROMs. The only things that we can do is flash a custom ROM or flash an SBF through RSD Lite. Kernels cannot be changed otherwise.
Sent from my Milestone using XDA Premium App
ya I understand that, and that's exactly the reason why i'm confused.....
If you flash a v2.1 SBF, then your Android version is v2.1 (Eclair).
If you flash a v2.2 SBF, then your Android version is v2.2 (Froyo).
Now, the problem is that custom roms like CM7 requires the kernel for Froyo. In other words, you have to flash a stock v2.2 SBF first, so that your phone will be running Froyo and that the kernel will obviously be for Froyo as well.
So what I don't understand is, I'm using Eclair right now because I flashed a New Zealand v2.1 SBF. The Android version I'm running on is Eclair, and the kernel version should be for Eclair as well.
Then why is it that you guys said I can still flash CM7, which requires the kernel for Froyo?
chaoscreater said:
ya I understand that, and that's exactly the reason why i'm confused.....
If you flash a v2.1 SBF, then your Android version is v2.1 (Eclair).
If you flash a v2.2 SBF, then your Android version is v2.2 (Froyo).
Now, the problem is that custom roms like CM7 requires the kernel for Froyo. In other words, you have to flash a stock v2.2 SBF first, so that your phone will be running Froyo and that the kernel will obviously be for Froyo as well.
So what I don't understand is, I'm using Eclair right now because I flashed a New Zealand v2.1 SBF. The Android version I'm running on is Eclair, and the kernel version should be for Eclair as well.
Then why is it that you guys said I can still flash CM7, which requires the kernel for Froyo?
Click to expand...
Click to collapse
I have never tried flashing CM7 from Eclair, so I can't tell you that it will work. I upgraded to stock Froyo on Telus the day it came out and got frustrated with it and rooted the same day.
Sent from my Milestone using XDA Premium App
Hmm well I'd flash to stock Froyo as well, then I wouldn't have a problem installing CM7 because I know it'll definitely work. Except that the kernel for Froyo doesn't work well on my Milestone. Many people have problems with the Froyo kernel, mostly to do with connection problems like wifi or 3g.
I've had problem with my wifi where it connects to my router, but isn't sending/receiving any data. Either that, or it works for 5 mins and then disconnects itself afterwards.
Many people suggested to flash back to stock Eclair, so I did and my wifi works awesome right now and never had a connection problem yet. Currently, i'm using the TelusLite v5.2 custom rom for Eclair, and it works great but I wanna try out custom roms for Cyanogen Mod, like CM6 or CM7.
From what I know, CM6 is for Eclair because it uses the Eclair kernel. Whereas CM7 is for Froyo as it uses the Froyo kernel. However, I think the latest version of CM6 also uses the Froyo kernel, as somebody mentioned it in the CM7 topic somewhere.......so ya I'm pretty sure you CAN'T install CM7 on Eclair since the kernel requirement is different.
And yet, i'm confused with the answer in the 4th post:
http://forum.xda-developers.com/showpost.php?p=16834339&postcount=4
chaoscreater said:
Hmm well I'd flash to stock Froyo as well, then I wouldn't have a problem installing CM7 because I know it'll definitely work. Except that the kernel for Froyo doesn't work well on my Milestone. Many people have problems with the Froyo kernel, mostly to do with connection problems like wifi or 3g.
I've had problem with my wifi where it connects to my router, but isn't sending/receiving any data. Either that, or it works for 5 mins and then disconnects itself afterwards.
Many people suggested to flash back to stock Eclair, so I did and my wifi works awesome right now and never had a connection problem yet. Currently, i'm using the TelusLite v5.2 custom rom for Eclair, and it works great but I wanna try out custom roms for Cyanogen Mod, like CM6 or CM7.
From what I know, CM6 is for Eclair because it uses the Eclair kernel. Whereas CM7 is for Froyo as it uses the Froyo kernel. However, I think the latest version of CM6 also uses the Froyo kernel, as somebody mentioned it in the CM7 topic somewhere.......so ya I'm pretty sure you CAN'T install CM7 on Eclair since the kernel requirement is different.
And yet, i'm confused with the answer in the 4th post:
http://forum.xda-developers.com/showpost.php?p=16834339&postcount=4
Click to expand...
Click to collapse
I haven't heard of Eclair to CM7 directly. Every ROM except for the Eclair roms like you are running now are ALL based on Froyo. GB is based on the Froyo kernel, but is a gingerbread port.
Sent from my Milestone using XDA Premium App
yup I know. After all, there is no official Gingerbread support for Milestone (yet), that's why we don't have a v2.3 SBF to flash (therefore not able to get the kernel for Gingerbread).
But ya i'm pretty sure I got this sorted, after all the OP did specifically say that some roms might not work due to different kernels, which is mentioned in this topic here:
http://forum.xda-developers.com/showthread.php?t=966812
so ya you either have to flash the stock v2.1 SBF or v2.2 SBF in order to install specific custom roms that you want, depending on what kernel they're based on, right?
Oh well, guess i'll just stay with TelusLite v5.2 for now. It's pretty fast and stable so I guess that's good enough.
chaoscreater said:
yup I know. After all, there is no official Gingerbread support for Milestone (yet), that's why we don't have a v2.3 SBF to flash (therefore not able to get the kernel for Gingerbread).
But ya i'm pretty sure I got this sorted, after all the OP did specifically say that some roms might not work due to different kernels, which is mentioned in this topic here:
http://forum.xda-developers.com/showthread.php?t=966812
so ya you either have to flash the stock v2.1 SBF or v2.2 SBF in order to install specific custom roms that you want, depending on what kernel they're based on, right?
Oh well, guess i'll just stay with TelusLite v5.2 for now. It's pretty fast and stable so I guess that's good enough.
Click to expand...
Click to collapse
The issue is that TelusLite is no longer updated. Any issues that you will encounter may not be fixed. I've always found RSD Lite to be finicky, but you can always flash the 2.2 VR and try other ROMs and if you aren't happy, you can reflash the 2.1 and go back to TelusLite.
Many options for you to try out!
Sent from my Milestone using XDA Premium App
ya it seems like it. But the latest build (v5.2) was updated on July 2011 so it's only a month old? So ya not too bad. I haven't had any issues with it, and all the stuff that I use my phone for works fine on this rom so i'm pretty happy with it.
I only wanted to try out CM7 because it looks nice and that many of my friends recommended me to use it. But ur right, there're still other great roms out there that I can test out.
RSD Lite works well for me, never had a problem with it so i'm pretty happy. At least the flashing and rooting process on Android is fairly easy. Whereas on Windows Mobile or on Maemo (when I still had my Nokia N900), it was a pain in the ass, especially that the flasher program for Maemo doesn't work on Windows 7
Anyway, thanks A LOT for your help. You've helped me in the other topic I posted as well, I really appreciate you taking the time to answer my newbie questions
chaoscreater said:
ya it seems like it. But the latest build (v5.2) was updated on July 2011 so it's only a month old? So ya not too bad. I haven't had any issues with it, and all the stuff that I use my phone for works fine on this rom so i'm pretty happy with it.
I only wanted to try out CM7 because it looks nice and that many of my friends recommended me to use it. But ur right, there're still other great roms out there that I can test out.
RSD Lite works well for me, never had a problem with it so i'm pretty happy. At least the flashing and rooting process on Android is fairly easy. Whereas on Windows Mobile or on Maemo (when I still had my Nokia N900), it was a pain in the ass, especially that the flasher program for Maemo doesn't work on Windows 7
Anyway, thanks A LOT for your help. You've helped me in the other topic I posted as well, I really appreciate you taking the time to answer my newbie questions
Click to expand...
Click to collapse
Anytime! Let me know if you need anything else
Sent from my Milestone using XDA Premium App
chaoscreater said:
Hmm well I'd flash to stock Froyo as well, then I wouldn't have a problem installing CM7 because I know it'll definitely work. Except that the kernel for Froyo doesn't work well on my Milestone. Many people have problems with the Froyo kernel, mostly to do with connection problems like wifi or 3g.
I've had problem with my wifi where it connects to my router, but isn't sending/receiving any data. Either that, or it works for 5 mins and then disconnects itself afterwards.
Many people suggested to flash back to stock Eclair, so I did and my wifi works awesome right now and never had a connection problem yet. Currently, i'm using the TelusLite v5.2 custom rom for Eclair, and it works great but I wanna try out custom roms for Cyanogen Mod, like CM6 or CM7.
From what I know, CM6 is for Eclair because it uses the Eclair kernel. Whereas CM7 is for Froyo as it uses the Froyo kernel. However, I think the latest version of CM6 also uses the Froyo kernel, as somebody mentioned it in the CM7 topic somewhere.......so ya I'm pretty sure you CAN'T install CM7 on Eclair since the kernel requirement is different.
And yet, i'm confused with the answer in the 4th post:
http://forum.xda-developers.com/showpost.php?p=16834339&postcount=4
Click to expand...
Click to collapse
Well, you can open a CM7 zip package, you should see a file named "boot.img", that is the kernel, came from the stock Froyo SBF, so that it can pass the bootlooder checking, and it will replace the old kernel during the CM7 installation. That is why the kernel will update to the stock 2.2 kernel after you installed the CM7.
Charles_l said:
Well, you can open a CM7 zip package, you should see a file named "boot.img", that is the kernel, came from the stock Froyo SBF, so that it can pass the bootlooder checking, and it will replace the old kernel during the CM7 installation. That is why the kernel will update to the stock 2.2 kernel after you installed the CM7.
Click to expand...
Click to collapse
I see......in that case, can I replace the boot.img with the one for Eclair? I.e, use the 2.1 kernel instead of 2.2? I'm pretty sure this isn't possible since the custom rom is made to work with that particular kernel version, but maybe it does work?

[Q] Can I "downgrade" from 2.3.4 to 2.2?

At first I tried Fasty II but the GPS was worse than what I was used to (KB2 stock ROM). I'm currently using the Fusion V ROM GB 2.3.4 but the GPS on it stinks as well.
Anyways, I've heard good things about the GPS on Fasty v2.5 KB1 ROM and since it is similar to KB2 I thought I would give it a try.
So, my question is: Can I flash this ROM while on GB bootloaders?
I seem to remember reading somewhere that the GB bootloader was backwards compatible. But I want to verify before flashing Fasty v2.5.
Thanks!
Shawn
you should be just dandy
xhozt said:
you should be just dandy
Click to expand...
Click to collapse
Well I just tried to flash the ROM, but it said that it wasn't supported. I guess I need to flash back with the one click stock KB1. I'll try that next.
Thanks!
That's because the froyo ROM is written with ammend scripting.for cwm 2.5 and below and your most likely running 3.0+ which uses edify scripting.
Flash a froyo kernel with Odin/heimdall or sgs kernel flasher and then flash the ROM.
studacris said:
That's because the froyo ROM is written with ammend scripting.for cwm 2.5 and below and your most likely running 3.0+ which uses edify scripting.
Flash a froyo kernel with Odin/heimdall or sgs kernel flasher and then flash the ROM.
Click to expand...
Click to collapse
Thanks for the info, but I already flashed back to 2.2 1-click. Now I guess I should be able to flash a KB2 ROM. Assuming I figure out how to install CM that works with the stock 2.2. I'm back to the 3e version.
Shawn
Just do now what studacris said before... that is, just Odin/Heimdall/SGS kernel Flasher a Froyo kernel with CWM already baked in and then u can flash the Froyo Rom of ur choice.
sblees said:
Thanks for the info, but I already flashed back to 2.2 1-click. Now I guess I should be able to flash a KB2 ROM. Assuming I figure out how to install CM that works with the stock 2.2. I'm back to the 3e version.
Shawn
Click to expand...
Click to collapse
Look for Speedmod-Kernel-K12u-t4-500kz .. flash it on your 2.2 with Odin and you'll get CWM for 2.2 that will let you flash 2.5. I always use this method when flashing new roms. Works great for me. I used 2.5.. it worked great on GPS.. Mosaic VII GPS also works great for me too.

Upgrading from Froyo to ICS

So my old phone is no used by my sister and is still running Fusion ROM on Android 2.2. For some reason the wifi is no longer working and I figure I would upgrade to ICS since I am redoing things anyway. I read another thread where a guy flashed straight from Froyo to ICS and is running ok, but I remember going from Android 2.1 to 2.2 was a pain and I had to wipe, flash back to stock, flash new bootloaders, and then the Froyo ROM. I would assume going all the way to ICS which has major changes would also require something complex but just want to be sure about the process. So am I supposed to use Odin to flash stock Gingerbread and bootloaders before I upgrade to ICS? Or is it really fine and all will work if I just flash an ICS based ROM from where I am right now?
I am thinking of flashing the SlimICS ROM unless someone can tell me a reason why that ROM is not very good?
Currently the phone has the 2.2 firmware, i897UCKB1 baseband, 2.6.32.9 kernel, and is running Fusion 1.9.8 ROM. I am not sure on the bootloader version, but I have a file on my PC from a long time ago called "galaxys-bootloader-JVB.tar.md5" that I think I probably used to update the bootloader all that time ago when I moved to Froyo.
See TRusselo's "[Guide] How to flash ANY Captivate Rom from Stock (including ICS)" that is a stickied thread in the Q&A Forum...
Sent from my SAMSUNG-SGH-I777 using xda premium
So, your saying I should flash to stock and then flash to gingerbread before moving to ICS then?
Nope. Just Read the OP of that Guide and all will be clear... Just Read the 1st sentence of that OP...Lol
Sent from my SAMSUNG-SGH-I777 using xda premium

Categories

Resources