Hello
My N1 can connect easily to all kind of wifi routers and modems without problem but not with my fitness club's one, they have a Linksys N160.
My N1 can detect the signal,enter the password but then it's stucked with the message ''getting ip...''
Where is the problem? is it a know hardware or software compatibility stuff?
Sometimes rebooting the wifi router helps. Also make sure that when the guy over at your fitness club reboots the router you don't have the wifi of the club saved. delete the saved wifi profile, reboot the wifi router and then try. Cheers.
Already tried it several times. I saw that OS4 of iphone/ipod have the same problem with router enabling Wireless-N, I will ask him to limit the router to B/G
I also had similar problem with Linksys WAG54G2 (at latest firmware). Then I changed to much cheaper adsl router, TP-LINK WD-W8960N and no more connection problem.
Sent from my Nexus One using XDA App
I had problems using my Nexus One on my SMC Barricade 802.11b/g/n router when 802.11n was enabled. Turned it off; problems were gone. I don't think that works well yet, though some people have said otherwise. Could be a router-specific issue.
Ok so it's a WAG160N to be specific.
He tried to use mixed B/G instead of mixed (which would imply N too) but it still stuck at getting ip...
I told him to throw this router in the garbage because anyway SE and HP mobiles can't connect too,but he said he would do it but his boss will never accept to pay a penny more
My parents had a router that did exactly the same, my phone got stuck on Obtaining IP, whilst the missus 5800 connected and broswed just fine.
It was a crappy old thing and they replaced it the other week, now I can connect and browse just fine.
I also use a linksys WAG160N.
bought a nexus one, could not for the life of me get an internet connection.
turns out dns on router is poofed, so i just set DNS from my isp manually on the nexus one together with a static ip and booya interent at full 802.11n speeds.
sometimes its the simple things.
This sounds similar to when I set my router to channel 13 or whatever the max was on it. My N1 would only sometimes get a connection, but would eventually drop it and stay off. Solved it by selecting a lower channel (WifiAnalyzer suggesten channel 1 as the best alternative to channel max) on the AP.
I can see that in CM6 nightly that I have since started using I can choose regulatory domain, and thereby open up channels previously blocked. If you can't change anything on the AP this might help you solve the problem on your end.
So suggestions if none of the posts above me provide a solution is to run WifiAnalyzer and see how the channel-graph looks.
Related
Hi, is there anyone having this issue using wifi? My linksys wag300n reboots after few minutes of use with kaiser. Linksys customer support doesn't know how to solve the problem.
I tried changing the channel but with no result. It lasts max 5' then the router reboots and the kaiser doesn't connect anymore.
Hi
If your box reboots it is a problem with your router as it is of course a security hole that could allow a denial of service attack. Your router shouldn't reboot no matter what tries to connect to it.
The Kaiser is Wi-Fi approved and has worked with no issues wherever I have tried it, as far as I can see your router isn't, this means it probably lacks the testing and interoperability of other routers that have gone through the testing procedure to get the Wi-Fi logo.
I would check for updated firmware for your router, that may help. Often disabling security and encryption will see things play a lot better together however you don't really want to do that.
You may need to get a new router for it to work reliably
Regards
Phil
The firmware is the latest, and linksys assistance is futile, suggesting channel switching and ssid renaming...
Wireless works flawlessly with a notebook, but with kaiser lasts only few minutes, and of course is NOT kaiser's fault, infact i didn't even bother contacting HTC.
ATM i think that you're right: the only solution is getting another box.
Thanks for your reply
The linksys WAG devices are a royal pain in the a.......
Switch to a better router would be my choice..... It seems unless your paying a squilian bucks for a TRUE cisco device, then Cisco stuff sucks.... However all my Cisco stuff works a treat (for the most part).
If you do go searching out a new router, and like to flash roms on more than just your phone, check out these routers at this link
http://www.dd-wrt.com/wiki/index.php/Supported_Devices
it's a free linux-based system that you can flash on various routers that adds tons of functionality to the device. i have the standard install of dd-wrt on a wrt54g v2 linksys router, and it works flawlessly.
Got me a new router from my ISP, of course there were issues instantly! Having problems connecting to wifi. Called my ISP and they said there is a bug somewhere in the router or in android itself. The router is a ZYXEL P-2812HNU-F1. They said I needed to get a static ip adress to each device. I got my Galaxy S2 up and running in no time, however, my HP Touchpad is not being so friendly. It says I'm connected but I get the grey wifi icon. Tried to disconnect and reconnect but no result. Also tried to forget the wifi and so on but no result. Also changed to b/g since it handles /n aswell. I've changed the router channel. In addition, my TP have begun to reboot randomly often in very fast cycles. I've flashed the Supreme mods a few days ago and everything worked flawlessly with my old router. Could the Supreme mod interfere with this maybe? Anyone please, this is so frustrating!
Edit: I'm on CM9 14 July build
Creutz said:
Got me a new router from my ISP, of course there were issues instantly! Having problems connecting to wifi. Called my ISP and they said there is a bug somewhere in the router or in android itself. The router is a ZYXEL P-2812HNU-F1. They said I needed to get a static ip adress to each device. I got my Galaxy S2 up and running in no time, however, my HP Touchpad is not being so friendly. It says I'm connected but I get the grey wifi icon. Tried to disconnect and reconnect but no result. Also tried to forget the wifi and so on but no result. Also changed to b/g since it handles /n aswell. I've changed the router channel. In addition, my TP have begun to reboot randomly often in very fast cycles. I've flashed the Supreme mods a few days ago and everything worked flawlessly with my old router. Could the Supreme mod interfere with this maybe? Anyone please, this is so frustrating!
Edit: I'm on CM9 14 July build
Click to expand...
Click to collapse
The wifi icon color is blue when you're connected to the Google servers. I remember reading something similar to your situation, I'll post a link if I find it. Meanwhile, you've probably tried this, but in case you haven't, try turning the router off for a while, then turn it back on again. You might want to go to a later build, they're quite stable. I'm one of the lucky ones, only had any wifi issues once, and turning the router off then back on solved it for me.
Good luck.
Edit : Try deleting the Supreme mods, they might be the problem.
As you said, I've tried to switch off the router and put it back on but I tried it once again but no result. I've also removed the supreme mods but there is no difference. I still get the grey wifi icon. Maybe should try a newer build, so tiredsome though but maybe the only solution. Will call my ISP for a factory reset on the system aswell.
Edit: Managed to come up with a solution. My ISP wasn't of any help so I had to do something on my own. So, I changed the security to wpa instead of wpa2 and noticed that my tablet got connection! The thing is, I want to use the /n standard and wpa does not support that. So (again), I had to enable a second wireless network and luckily my router supports four. One network with wpa2 (laptop) and one with wpa (tablet). Not a pretty solution but it works!
Creutz said:
Got me a new router from my ISP, of course there were issues instantly! Having problems connecting to wifi. Called my ISP and they said there is a bug somewhere in the router or in android itself. The router is a ZYXEL P-2812HNU-F1. They said I needed to get a static ip adress to each device. I got my Galaxy S2 up and running in no time, however, my HP Touchpad is not being so friendly. It says I'm connected but I get the grey wifi icon. Tried to disconnect and reconnect but no result. Also tried to forget the wifi and so on but no result. Also changed to b/g since it handles /n aswell. I've changed the router channel. In addition, my TP have begun to reboot randomly often in very fast cycles. I've flashed the Supreme mods a few days ago and everything worked flawlessly with my old router. Could the Supreme mod interfere with this maybe? Anyone please, this is so frustrating!
Edit: I'm on CM9 14 July build
Click to expand...
Click to collapse
I did read somewhere that giving the TouchPad a static IP address helped with a lot of WiFi problems, maybe its something you could try. I personally haven't had any WiFi problems so I have never needed to test it.
BIGSimon said:
I did read somewhere that giving the TouchPad a static IP address helped with a lot of WiFi problems, maybe its something you could try. I personally haven't had any WiFi problems so I have never needed to test it.
Click to expand...
Click to collapse
Made a little update on my previous post. The solution was that I needed to change the security on my network (wpa2 to wpa). But as you mentioned, I needed to set it to a static IP adress aswell. Up and running now, as I type at least
try running an atheros update. i also prefer wifi analyzer for connecting to wireless networks rather than the android wireless settings. It shows you detail and information that android settings do not. Lets you configure channel options for B/G/N and A. plus more. its avail in google play.
I just got an Sony Xperia T,
now I was trying to connect is to my router with the 5ghz-band, but the Xperia T can't find the network,
so then manually added the network, inserterd password, but then it says that the network isn't within reach,
but i'm sitting next to the router, the 2.4ghz-band works fine, and sony confirms that the phone should work with
the 5ghz-band in the white paper of the phone. Does anyone know how to solve this problem?
BTW, my router is a Netgear WNDR3700 Dual Band.
Dutchmann said:
I just got an Sony Xperia T,
now I was trying to connect is to my router with the 5ghz-band, but the Xperia T can't find the network,
so then manually added the network, inserterd password, but then it says that the network isn't within reach,
but i'm sitting next to the router, the 2.4ghz-band works fine, and sony confirms that the phone should work with
the 5ghz-band in the white paper of the phone. Does anyone know how to solve this problem?
BTW, my router is a Netgear WNDR3700 Dual Band.
Click to expand...
Click to collapse
On your router have you set it to dual band as a lot of the time they have it defaulted to 2.4 b/g so you'd need to change it to auto or whatever option allows all. On my Linksys it says 2.4 and 5 as an option in the dropdown. That would be the only reason I can think of. Have you tried with any other device to connect to your 5ghz network?
Likely a router compatibility issue. I can connect to a Linksys e4200 on 5ghz with no problems
Sent from my Xperia T
My Xperia T refuses to connect to my WiFi AP. It's only 2.4GHz, but according to the logs on the AP, it isn't even trying. On the phone side I very briefly see "Connecting" or similar on the AP list, then it reverts to Saved.
Log on phone is filled with entries like this:
Code:
I/wpa_supplicant( 565): wlan0: Trying to associate with 00:0c:42:XX:XX:XX (SSID='LFWnet' freq=2412 MHz)
I/wpa_supplicant( 565): wlan0: CTRL-EVENT-ASSOC-REJECT bssid=00:0c:42:XX:XX:XX status_code=1
MAC's partially XX'd
This happened on the stock Vodafone ROM, and still occurs on the Generic UK posted in General. I have tried WPA and WPA2, TKIP and AES, different channels, disabling N etc etc, still the same
Tried soft/hard reboots, wipes etc, nothing. It has connected to other public and protected AP's fine.
Am gutted as changing my AP to work around this problem is a no-go. Not had any problems with various other laptops and phones, including other SE/Xperia devices.
LadFromWales85 said:
This happened on the stock Vodafone ROM, and still occurs on the Generic UK posted in General. I have tried WPA and WPA2, TKIP and AES, different channels, disabling N etc etc, still the same
Tried soft/hard reboots, wipes etc, nothing. It has connected to other public and protected AP's fine.
Am gutted as changing my AP to work around this problem is a no-go. Not had any problems with various other laptops and phones, including other SE/Xperia devices.
Click to expand...
Click to collapse
I'm on generic UK rom and using a BT Home Hub without any problems. I've also got my old dLink wireless n router I use as a print server and it works fine with that too. My brother has a Sky router (Netgear I think) and that works fine.
I think you must be unlucky.
---------- Post added at 07:11 AM ---------- Previous post was at 07:07 AM ----------
Is your SSID published? Have you tried turning off all security on the router to see if you can connect then? (obviously I'm not suggesting you leave it unsecured but it is something to try.)
Also, posting your router details may give you an idea if others have been successful with that router before you splash any cash on a new one.
Hi, my Xperia T also is not able to connect with my e4200 5 GHz WiFi. My Laptop and a Samsung Phone works without any problems... I read (sorry I don´t remember the forum link) Sony did not enable the 5 GHz frequency because of driver issues. But if it works on some phones, maybe it´s a provider specific issue like the permanent bootloader lock?
Might be worth updating the firmware of your router?
Sent from my LT30p using xda app-developers app
I think I found the problem, the 5ghz band of my router doesn't have much range appearently, when i'm trying to find the 5ghz band outside of my house, i can't find it, I can only find it when i'm in my room, that's where the router stands, but the 2.4 ghz band has a much better range, I can connect to is almost 20-30 meters outside of my house. I'm wondering when Netgear is coming out with an update for my router, hopefully that will solve the problem, or maybe it will be solved when the Xperia T gets an update to Jelly Bean.
Dutchmann said:
I think I found the problem, the 5ghz band of my router doesn't have much range appearently, when i'm trying to find the 5ghz band outside of my house, i can't find it, I can only find it when i'm in my room, that's where the router stands, but the 2.4 ghz band has a much better range, I can connect to is almost 20-30 meters outside of my house. I'm wondering when Netgear is coming out with an update for my router, hopefully that will solve the problem, or maybe it will be solved when the Xperia T gets an update to Jelly Bean.
Click to expand...
Click to collapse
Hi there,
I've just bought the Xperia T and I'm pretty disappointed I can't use my home wifi.
I'm having exactly the same problem - I can see my connection and connect (sometimes) but it is a very poor connection, then after a minute or says "Not in range". If I go outside (which is actually closer to where the modem is) I can get data at an acceptable speed.
Sorry I'm such a noob but can you explain to me where the limitation lies and how I might fix it. Every other device used in the house works - even an old iphone 3gs - I'm surprised Sony's newest phone hasn't implemented technology that must have been in use for years.
Or if it is the modem - any ideas on how to change it.
Sorry - can't give you details - the modem is locked in the landlords garage - so I can't see what make it is.
Thanks for helping a noob.
I have faced the same problem with my TX when connecting to my AP.
I think there is WIFI problem in receiving the WIFI signal of security mode WPA2/WPA.
You can change the WIFI security mode to WEP or No security.
My device can connect the WEP mode WIFI.
Hope you can solve the problem!
pechnatunk said:
Hi there,
I've just bought the Xperia T and I'm pretty disappointed I can't use my home wifi.
I'm having exactly the same problem - I can see my connection and connect (sometimes) but it is a very poor connection, then after a minute or says "Not in range". If I go outside (which is actually closer to where the modem is) I can get data at an acceptable speed.
Sorry I'm such a noob but can you explain to me where the limitation lies and how I might fix it. Every other device used in the house works - even an old iphone 3gs - I'm surprised Sony's newest phone hasn't implemented technology that must have been in use for years.
Or if it is the modem - any ideas on how to change it.
Sorry - can't give you details - the modem is locked in the landlords garage - so I can't see what make it is.
Thanks for helping a noob.
Click to expand...
Click to collapse
Skylegend said:
I have faced the same problem with my TX when connecting to my AP.
I think there is WIFI problem in receiving the WIFI signal of security mode WPA2/WPA.
You can change the WIFI security mode to WEP or No security.
My device can connect the WEP mode WIFI.
Hope you can solve the problem!
Click to expand...
Click to collapse
Hmmm, that's strange - my modem is set to WEP and it's not really a connection problem but a signal strength problem. But like I said - no other device has this issue. It is hard to test - right now I'm accessing this from a cloud connection which is average compared to another I used this morning, though much better than at home. But I don't know how close I am to the transmitter right now.
Hello again,
I'm still trying to get to the bottom of this:
So my Xperia T can connect and use the wifi in my house fine IF I am within 2-3 metres of my router, which has the following settings -
O2 Wireless Box, model - TG585v7
Software release - 8.2.7.7
Boot loader 1.0.0
Interface Type: 802.11b/g
Band: 2.4G Hz (This unfortunately cannot be changed)
It is currently set to WEP security but when I changed to WPA-2 there was still no change - could only connect when a couple of metres away.
Also even when holding my phone 10cm away from the router I still only get a "Good" connection. So I started to think it must be my phone that is faulty - I've been to coffee shops and picked up the free Cloud wifi ok, though one kept dropping in and out. And I have been into mobile phone shops testing their wifi and it connects.
But yesterday I went to Carphone Warehouse and compared to one of their demo Xperia T phones - the demo was connected to their wifi fine yet my phone could not even "see" their connection - I was sure it was my phone.
But now I'm really confused - today I went to a different Carphone warehouse - there was no demo phone but I picked up their signal and the quality was "Excellent" - something I'd never seen before.
My phone is locked to T-Mobile - can a carrier locked phone somehow restrict access to certain routers?? Seems very weird to me, though I am quite a novice at all of this.
Any help would be much appreciated.
Thanks.
locked phone won't block AP access... maybe backup your data and try master reset.. factory reset... don't need erase sd card.
Sent from my LT29i using xda app-developers app
Are you using the T-Mobile WiFi app? If so delete your connection from settings, then set your home WiFi via the T-Mobile app, it may be connecting to the open one not your full one.
If you don't use the app, I would change the channel on the router and try that.
Sent from my LT30p using xda app-developers app
xperia t
I use Xperia T in Turkey but I bought ıt in Bosnia. I checked my phone's ID and ın myphone has got Vodafone Wi-Fi .. When My phone's Wi-Fi is online then suddenly myphone begin afresh itself. What is the problem please help me ..
I had the same problem then I discovered it happen only in stock firmware or stock based ROM. Try Flashing CM10 or CM10.1. Your problem will likely be solved.
Hey guys, I got a problem with wifi on my One. The thing is I got a couple of wifi routers in my house (one can't cover the entire building) and they're both broadcasting the same SSID, password etc. basically one is connected via RJ45 to the other and set up exactly the same way. Problem is when I move around the house and lose connection to one of my routers and the phone automatically connects to the other all my connections on the phone stop working and I have to turn my wifi off and on again. Same thing happens when I'm at my university, each floor has 2 wifi routers on it and phone tends to jump between them screwing up the internet connection each time. I know it might not be the biggest issue in the world but still it's quite annoying especially since my old SGS didn't have this problem. My phone is not branded and of course up to date. Thanks for any advice.
theleet said:
Hey guys, I got a problem with wifi on my One. The thing is I got a couple of wifi routers in my house (one can't cover the entire building) and they're both broadcasting the same SSID, password etc. basically one is connected via RJ45 to the other and set up exactly the same way. Problem is when I move around the house and lose connection to one of my routers and the phone automatically connects to the other all my connections on the phone stop working and I have to turn my wifi off and on again. Same thing happens when I'm at my university, each floor has 2 wifi routers on it and phone tends to jump between them screwing up the internet connection each time. I know it might not be the biggest issue in the world but still it's quite annoying especially since my old SGS didn't have this problem. My phone is not branded and of course up to date. Thanks for any advice.
Click to expand...
Click to collapse
From my experience after installing a lot of different wifi's in different operation modes, it all depends on how exactly the routers have been setup.
But to answer your initial question- the topic at hand; as long as the wifi's broadcasts the same SSID, you cannot choose which of the two individual routers you want to connect to. Please someone correct me if I'm wrong, but afaik this is not possible. If you want the possibility to choose, then set them up with different SSID's. This would be the _easiest_ solution, just make sure they broadcasts at different frequencies with at least 5 channels apart, i.e. channel 1 and 6, or 6 and 11, or 1 and 11. These are the most popular ones in the 2.4 GHz spectrum. If you use 5 GHz you have a lot more to choose from.
Now, if it's important that your network works seamlessly (with the same SSID), I can provide a step by step guide upon request.
But the solution to your current problem, from my experience; yes you have to turn the wifi off and then on again to "force" the wlan-card on your cell phone to -faster- connect to the closest router, otherwise it will take maybe 15-45 seconds before it does this automatically. It's basically the same with computers. This mostly happens if the wlan-card are within range of both networks, but it will try to stay connected to current one before changing.
And there are some important guidelines to follow when you connect one router to another if they are from the same brand (because of the ip-range and gateway). I once had to setup 8 wifi-routers in a house, because of the size and the thick concrete walls (same SSID)...
The problem is my laptops and other phones don't seem to have this problem, also the phone doesn't 'fix' itself after 40 or so secs it just stays broken as far as I've noticed forever (or at least till i leave my house). Also it doesn't have a problem connecting to the other router, it loses connection, looks for available networks, finds my other router, connects and... nothing works. Exact same thing at the university, finds routers, connects with 5/5 bars and it just doesn't work.
theleet said:
The problem is my laptops and other phones don't seem to have this problem, also the phone doesn't 'fix' itself after 40 or so secs it just stays broken as far as I've noticed forever (or at least till i leave my house). Also it doesn't have a problem connecting to the other router, it loses connection, looks for available networks, finds my other router, connects and... nothing works. Exact same thing at the university, finds routers, connects with 5/5 bars and it just doesn't work.
Click to expand...
Click to collapse
Are you sure you have it setup with DHCP and not some static ip-settings? Can you post some screenshots of your wifi-settings?
If you haven't tried already, get your phone to "forget" it's settings so you have to reenter the password and make sure it's set to DHCP. But first take out the power from both your routers so they get a reboot, and make sure the ethernetcable is connected from one of the LAN ports on the main router connected to the internet (from your cable/dsl/fiber-modem), and in to the WAN/Internet port on the secondary router. Btw what routers do you use as master and slave?
Yes of course I have the routers set up just like you say And yes I'm using DHCP on both of them. They are Airlive 1600GL with tomato rom as main and WR740N as secondary. I took screenshots of what seemed relevant sorry the main router's settings are not in English but it seems that would require me to reflash it with a different rom.
https://dl.dropboxusercontent.com/u/2668574/HTC One/Screenshot_2013-12-20-23-22-28.png
https://dl.dropboxusercontent.com/u/2668574/HTC One/Screenshot_2013-12-20-23-24-00.png
https://dl.dropboxusercontent.com/u/2668574/HTC One/Screenshot_2013-12-20-23-24-28.png
https://dl.dropboxusercontent.com/u/2668574/HTC One/Untitled.jpg
theleet said:
Yes of course I have the routers set up just like you say And yes I'm using DHCP on both of them. They are Airlive 1600GL with tomato rom as main and WR740N as secondary. I took screenshots of what seemed relevant sorry the main router's settings are not in English but it seems that would require me to reflash it with a different rom.
https://dl.dropboxusercontent.com/u/2668574/HTC One/Screenshot_2013-12-20-23-22-28.png
https://dl.dropboxusercontent.com/u/2668574/HTC One/Screenshot_2013-12-20-23-24-00.png
https://dl.dropboxusercontent.com/u/2668574/HTC One/Screenshot_2013-12-20-23-24-28.png
https://dl.dropboxusercontent.com/u/2668574/HTC One/Untitled.jpg
Click to expand...
Click to collapse
What's with the DNS being 8.8.8.8 and 8.8.4.4?
Seraphicus said:
What's with the DNS being 8.8.8.8 and 8.8.4.4?
Click to expand...
Click to collapse
These are Google DNS.
I would do it simple and solve it by changing the SSID on the slave router to something different, like wireless2, and change channel to 1. Or change the channel on the master router from 8 to 11. Your phone will probably change from one network to another faster this way, or it's at least easier for you to manually choose.
If that doesn't help, and the network is 100% problemfree for other wireless devices, I guess it must be a firmware or hardware problem with your One's wlan-card. Most likely firmware.
I will try it in the morning but still I'm pretty confident it's not the matter of setting up my home network but rather One's software bug. I can't say with 100% certainty right now but I don't remember having this issue before the update to the newest Android version.
Both routers need to be on the same subnet, enable dhcp server on one and disable it on the second one. Also set the second one as an access point only with a static ip in the same subnet.
The problem you have now is that wireless clients must negotiate a new ip when switching routers because of different subnets assigned to each.
Let me know if you need more details.
But still that would fix the problem at my home, what about when I'm somewhere else?
What ROM are you running? I leave wifi enabled all the time and haven't had any issues moving between networks, it automatically connects when another network is in range.
Android 4.3 with Sense 5.5 all stock not even rooted.
Since your completely stock it should just work. I'd try fixing the home network first and see if that solves the issue at home, then move on to trying to figure out the network issue at school.
Router1 - master
Internet connected to wan port
Cable from lan port to a lan port on router2
Dhcp: enabled with an ip range of 192.168.1.100 and up
Lan ip 192.168.1.1
Channel 1
Router2 - slave
Nothing connected to wan port
Cable from Router1 lan port to lan port on this router
Dhcp: disabled
Lan ip 192.168.1.2
Channel 11
Set ssid and wpa settings the same on both routers.
With this setup clients can hop from one access point to the other without a dhcp request or ip change, should switch within seconds.
cschmitt said:
Since your completely stock it should just work. I'd try fixing the home network first and see if that solves the issue at home, then move on to trying to figure out the network issue at school.
Router1 - master
Internet connected to wan port
Cable from lan port to a lan port on router2
Dhcp: enabled with an ip range of 192.168.1.100 and up
Lan ip 192.168.1.1
Channel 1
Router2 - slave
Nothing connected to wan port
Cable from Router1 lan port to lan port on this router
Dhcp: disabled
Lan ip 192.168.1.2
Channel 11
Set ssid and wpa settings the same on both routers.
With this setup clients can hop from one access point to the other without a dhcp request or ip change, should switch within seconds.
Click to expand...
Click to collapse
Tried that setup for many times over the years I've worked with routers, from my experience that is unstable.
I use an ASUS RT-N16 w/dd-wrt as my house router. I routinely have 4 devices on its wireless. This is the scenario (which has only just started happening recently):
my wife will connect her S5 to the WiFi at home
the S5 will report connected
every other device on the WiFi that is handy (haven't checked if it happens to my Roku) will be kicked off the WiFi
the S5 will be disconnected
I will have to manually reconnect my other devices, which report an "authentication issue"
The other devices in question are: my Optimus G, my Shield Tablet, our Acer Win8 laptop. Signal strength is not an issue. I have tried:
setting the S5's WiFi connection to our router to a static address
resetting the router to factory default
changed the channel on the router's WiFi
disabling the router's ACK timing
changed the router's WiFi mode to NG-Mixed
Has anyone ever encountered anything like this? Definitely one of the oddest issues I've ever had the "pleasure" of dealing with.
t-readyroc said:
I use an ASUS RT-N16 w/dd-wrt as my house router. I routinely have 4 devices on its wireless. This is the scenario (which has only just started happening recently):
my wife will connect her S5 to the WiFi at home
the S5 will report connected
every other device on the WiFi that is handy (haven't checked if it happens to my Roku) will be kicked off the WiFi
the S5 will be disconnected
I will have to manually reconnect my other devices, which report an "authentication issue"
The other devices in question are: my Optimus G, my Shield Tablet, our Acer Win8 laptop. Signal strength is not an issue. I have tried:
setting the S5's WiFi connection to our router to a static address
resetting the router to factory default
changed the channel on the router's WiFi
disabling the router's ACK timing
changed the router's WiFi mode to NG-Mixed
Has anyone ever encountered anything like this? Definitely one of the oddest issues I've ever had the "pleasure" of dealing with.
Click to expand...
Click to collapse
That is weird. I have all sorts of stuff connecting to my WiFi. I use a WD router that has worked extremely well. I would suspect something wrong with the router.
Sometimes routers go bad like any other computer part. Do you have another router to test with your setup?
Looked at some of the reviews of your model and some people had major problems. It has a two year warranty, perhaps get an RMA if still time left. Of course flash it back to stock.
I got the suggestion from elsewhere to create a guest network for her. DD-WRT's got the ability to create a fully isolated guest network, but I only had to create a new wireless vlan for her (bridged, even) & she's happily connected on her own little space (& I'm still happily connected on mine).
More of a workaround than a solution, but hey...
Nicely done.
Update!
My wife took her S5 w/her down to a girls' weekend getaway, & she had to turn off her WiFi while she was at the house because, you guessed it, she kept kicking every other client off of the network!
I'm happy at home w/her on a separate WLAN, but I really do wonder wtf's going on w/her phone...