My G1 is running AmonRA 1.7.0 recovery and I recently switched from OpenEclair to Cyanogen 5.0.8. But when I wiped to factory reset/data wipe and installed the new ROM, all the applications were still there from the earlier ROM. I wiped ext partitions, cache and everything. I even tried partioning the SD card through the recovery, but it still lingered there. Anyone know what the problem is?
RodrigoKim said:
My G1 is running AmonRA 1.7.0 recovery and I recently switched from OpenEclair to Cyanogen 5.0.8. But when I wiped to factory reset/data wipe and installed the new ROM, all the applications were still there from the earlier ROM. I wiped ext partitions, cache and everything. I even tried partioning the SD card through the recovery, but it still lingered there. Anyone know what the problem is?
Click to expand...
Click to collapse
Yep. You didn't wipe one of either the ext partition or the userdata partition.
Use cyanogens recovery that has a console... then you can check type the scripts with the hard keyboard and check your work...
To wipe the ext partition:
mount /system/sd
rm -rf /system/sd/*
To see what is on the ext:
ls system/sd
Does nobody use switchrom.sh anymore?
-------------------------------------
Sent via the XDA Tapatalk App
will try that, thanks.
usually i use the console, but the options in the 1.7.0 recovery looked convenient and thought it would do the same thing as the commands on the console.
if you have found that you have wiped all sections in the recovery and the apps still appear. try going into your privacy settings and unchecking the option to back up system data to servers, then do a wipe.
When I am out in CWM recovery and go to wipe Dalvik Cache it says E:Info is WRONG all the time.
I have flashed a new firmware with odin , repartitioned and everything and still this error will not go away. Any ideas on how to fix? Thanks
dalvik cache still clears.
working as intended.
error shows because your external sdcard is unpartitioned.
Hello,
I am about to install CM7. I currently Have Nookie Froyo 0.6.8 with CWM 3.0.0.5. I believe I need to update to CWM 3.0.1.0 first. Do I need to wipe / format the boot partition first or will the update to CWM / CM7 do that? What data lives in boot curerntly and what would be a situation / reason for wiping the boot partitition? When is it ever done?
Thanks in advance!
~J
you should not wipe boot when installing cm7
mooja said:
you should not wipe boot when installing cm7
Click to expand...
Click to collapse
What would be a situation / reason for wiping boot? When is it ever done?
OK. thank you, but what would be a situation / reason for wiping the boot partitition? When is it ever done? I'm trying to learn about all aspects of rooting / cwm.
Thank you
~J
Not needed,running cwm will handle everything. Also the boot should stay so that SD keeps priority for recovery reasons.
There is a ROM Manager option to wipe data/cache, this should be done if changing rom types (ex nookie to CM7) but isn't usually needed between minor versions of the same rom unless issues arise.
It wipes the boot sequence, doesn't matter what rom you're going too, you need the boot data.
I've wiped it twice. Both times required I restored to stock before moving to a custom rom. Just wipe data and cache, and you'll be fine.
when going from nookie Froyo to CM7, you are changing the file system from EXT-3 to EXT-4. Remember to format /system /data /chache, and wipe Dalvik-cache within CWM 3.0.1.0 before installing the CM7 rom. By formating the three partitions in CWM 3.0.1.0 you upgrade the file system.
There is almost never a reason to format /boot. You will only cause problems that are annoying to fix.
Remember to do a backup in CWM before you format and flash CM7. You never know.
I have CM7 installed (latest nightly). When I reboot to CWM 3.0.1.0 with the SD card I used to originally install CM7, I can wipe davlik cache as per normal use.
When I reboot my nook with N key and power without my CWM SD card inserted I can do everything in CWM that I have tried, except wipe the davlik cache. When I press wipe davlik cache the screen blips for a second then just stays on that menu choice screen that contains wipe davlik cache. I don't get the yes no accept screen and it doesnt appear to wipe the cache.
What am I doing wrong? I assume it is something I do not fundamentally understand about how CM7 works with the different partitions.
There was a trick to this I read before but don't remember where. Try going up in the menus and unmounting the cache filesystem before doing it. It was something like that. I did it once, it worked, and then I promptly forgot it
For anyone else having this problem, an update to 3.0.2.8 through rom manager did the trick.
Hello guys,
I have a little problem which seems to be coming when I move the dalvik cache to the EXT partition of my device.
I am using the latest version of MIUI. It has A2SD built in, but it doesn't seem to be working. It was working before though...
What happened:
I restored the NANDROID backup of the stock ROM I had made before flashing MIUI. Once I booted into it, it warned me about the 2.3.4 OTA update. I did it, but forgot that it overwrites the bootloader, removes root and I will not be able to revert to MIUI.
I pushed the Clockwork recovery and immediately started restoring the NAND backup of my MIUI ROM. Without gaining root on the Stock 2.3.4 ROM.
The Dalvik was moved to the EXT on the MIUI I was trying to restore and functioning properly.
The restore went fine, until it got to restoring the sd-ext. It stood there at some *.tmp file for an hour or so. I removed the battery, booted into recovery, wiped and started the restore again. This time it finished, but when I went to start the phone, it got stuck at the Nexus logo, not even showing the MIUI boot screen.
Wiped again. Tried booting into a previous backup, which didn't have the Dalvik moved to the EXT partition. Restored and booted just fine.
I tried several more times restoring the latest backup I had (the one with dalvik to ext) and got the same result.
Then I tried installing the MIUI backup that didn't have Dalvik moved to EXT and tried moving the Dalvik to EXT. The phone rebooted and same thing happened. Didn't want to get past the Nexus logo.
I then wiped everything except batt stats, formatted ext, and flashed the MIUI ROM. It booted perfectly, but A2SD was not working, just like before (solution was to move dalvik to sd). I downloaded the A2SD GUI only and moved the dalvik to EXT AGAIN. And AGAIN - not booting past Nexus logo.
The only thing I still haven't done is formatting the SD and re-creating the EXT partition.
Any other suggestions on what may be causing this and how to fix it?
I want to have a2sd on this ROM and moving the dalvik to EXT seems to be the only way of achieving this.
Repartition SD card, you've most probably corrupted the EXT partition by pulling the battery.
Do you think that restoring the last MIUI backup I had after this will do the job?
After repartitioning? As long as you back up the files from the main FAT32 partition on the computer, and restore them back - the EXT will be overwritten when restoring nandroid anyway.
Well.... I just formatted the card with Panasonic SD formatter. Transfered only the nandroid backup (without creating an ext partition beforehand) and restored it successfully, but when the phone starts booting it is stuck at the Nexus logo.
I also checked the MD5 of the backup and everything is fine.
Godzi said:
Well.... I just formatted the card with Panasonic SD formatter. Transfered only the nandroid backup (without creating an ext partition beforehand) and restored it successfully, but when the phone starts booting it is stuck at the Nexus logo.
I also checked the MD5 of the backup and everything is fine.
Click to expand...
Click to collapse
Wipe Cache and dalvic. Than try again. Your System Need a ext wenn you push dalvic to sd before.
I ran out of options.
Formatted the card, tried restoring - Nexus logo
Wiped Everything + Dalvik and Cache, restored - Nexus logo
Wiped Everything + Dalvik and Cache, didn't restore old MIUI backup - successful boot. When I tried to move Dalvik to EXT after the successful boot - Nexus logo after restart.
If anyone can suggest anything... Because this way I have no access to the A2SD on the device with this ROM. And everything was working fine before I restored the Stock Ginger.
Did you try installing DT on any other ROM and try and move dalvik to the sd to see if it does the same thing?
Dude Random21 said:
Did you try installing DT on any other ROM and try and move dalvik to the sd to see if it does the same thing?
Click to expand...
Click to collapse
No. I haven't tried with another ROM. I guess I will try CM7 and see what happens when I move the Dalvik to the EXT.
I repartitioned once again, this time using the same EXT size as before the breakdown (512MB). When the backup I am trying to restore was made.
Was using 1024 when I partitioned previously and got the Nexus logo again.
Edit: Same thing. Successful restore and then the Nexus Logo.
I suspect it's the ext partition. Why don't you try formatting through recovery, and do a clean install?
Which recovery do you use? I would avoid Clockwork 3.x...
Well. I formated using Panasonic SD Formatted and then partitioned using the recovery. I did a clean install after that and as soon as I move the Dalvik to the EXT, I can't boot past the Nexus logo.
Yes, Clockwork 3.x. I guess I will try Amon_RA as well. Nothing left to lose.
If you partition with Amon Ra, make sure you up the partition from ext2 to ext3 (available through the Ra menu options)...
Ok. Partitioned with RA.
Tried to transfer the nandroid backup made by Clockwork to a sd/nandroid folder so I can restore it from within RA but it kept giving out some error telling me to look at the recovery log when I selected *.img files from the list.
Good news. I booted into MIUI and installed a2sd GUI. Moved Dalvik to EXT without a problem. I guess Clockwork's partitioning is flawed. Everything is working fine now.
Thank you.
Can anyone suggest a method I can use to restore the Clockwork made NAND backup + the EXT backup now when my partitions are finally alright.
Any method would be fine. Even manual through adb. I don't care. As long as I restore my phone to yesterday.
Thank you guys once again.
You should be fine if you load a clockwork prior to v3.x. I think 2.5.1.4 was the latest version prior to the v3.x series. The issues only arise with v3.x.
But only clockwork is able to restore clockwork backups, and the same goes for Amon_RA.
As an alternative, you can just extract the img files and manually load your data back on. It is definitely more time consuming, but it wouldn't matter what recovery you use. It has been a while since I extracted anything from the img files, and when I did, I just got the data from apps stored on the internal (apps and dalvik were stored on the sdcard), and I think the only program I used was unyaffs2 to extract the data.
Thank you guys!
Partitioning the card with Amon_RA and restoring the old Clockwork-made backup with Clockwork 2.* worked perfectly.
I will not use Clockwork ever agian. Putting Amon_RA and that's it.
You will only have this problem with clockwork 3.x - there doesn't appear to be the same issue with clockwork 2.x
I have been using v2.x without any issues (never upgraded to v3.x). I prefer it because it gives me the option to wipe the /system partition, whereas Amon_RA is missing this feature and you can only do it with a flashable zip.
I use 2.x for a number of reasons. I tried 3.x a few times, but always had ext issues on my N1. Having said that, I've used 3.x on my nook, MT4G and G2, and never had issues with them - just on the N1...
I've used RA 2.2.1 on CM7, MIUI ,Sense rom. I never seen sd-ext issues on my Nexus One.