I bought a new micro SD card to go to 16gb from 4gb... my phone is rooted with modaco desire rom installed, i merged all the files on my 4gb to the 16gb and then tried using it but it just goes to the first boot screen (the X) not to the one where all the lines fly in.. then i tried installing the rom again with that card in but still same prob =[ any ideas?
Related
I have a Transcend 8gb Class 6 microSDcard.
I turned the phone off to put the card in a card reader to reformat....i noticed that in Paragon Partition Manager 10 Server, that my sdcard is only showing as it being all a ext3 partition.
However windows vista can still read the fat32 partition and so can the g1....I am running JACHero's Roms...I have the new radio/spl and cyno's recovery. My g1 is working fine.
I just want to format the sdcard so i can put a updated JACHero rom on it.
Have you tried using Ubuntu? I find that better than paragon.
heres what i did...and it worked. i got the jailbrake cupcake and put my sd card in a usb sd reader and treated as if the droid was plugged by usb then put the original rom put the sd back in my droid alt s and boom it booted thank god cause i was about to spazz if i had to buy a new phone
No matter what SD card I put in my phone, it says there is no SD card installed. I have tried a 2GB and 2 8GB cards. They work fine in the PC... any ideas??
Does Sprint repair phones?
It sounds like there's an issue with your Hero or when you are putting the SD Card in it is not seating correctly.
If you are rooted flash the RUU to go back to stock and take it in to the Sprint store. That's if you're under your 1 year warranty of course.
I have a similar problem. I installed a new 32 gb SDHC card in a CDMA Hero running Cryogenmod. All was working well for about 10 days, then I got an error that no SD card was found. I had the original card that was recognized, and tried to get to the Clockwork recovery, no luck. Finally, through Rom manager, (flash alternate recovery to Ramon, then back to Clockwork) I was able to boot into recovery.
I still cannot format the new SDHC card, through Recovery, Windows 7, or the Panasonic program listed above. The Windows format option sees the card as a FAT 121mb card, so does the above program. Is this new card toast? It came with a lifetime warranty from Kingston, but I am mad that it did not make 2 weeks.
Any help would be greatly appreciated.
Craig
I had a card that I bought from Costco that did the same thing. I exchanged it and haven't had any problems since.
Sent from my HTC Evo Shift 4G
Try making a back up of the data on your sd then on your phone go into settings and choose SD card and phone storage scroll down to format SDcard when it's done it should recognize it if not then reboot and it should work hope it does good luck
Root-Hack-Mod-Always™
nook color running 1.2 did a hard reset on it to try and fix this problem
i ran CM7 off SD card fine for months till i did something stupid and deleted the build.prop and did not restore old one before rebooting.
sandisk class 3 4gb sd card formated in windows to fat 32 totally blan insert into nook it powers on.
now i redo all my steps i did few months back in this thread http://forum.xda-developers.com/showthread.php?t=1000957
insert card into nook and now nook wont power on unless i remove it wait a few seconds. no reformat it back to fat32 and insert into nook and it powers on fine.
any ideas?
so after putting in a new sd card it still refuses to boot with sd card in. could they have put some kind of preventive for booting from sd card? it boots fine if sd card is empty but soon as i put a boot img on it nada
hardware/port failure?
or can it read the sd card after you boot into vanilla nook?
i was updating a daily once and it would just sit there and always boot into nook... then i realized that my install (copy zip, boot, reboot) wasnt finishing properly and it appeared to not be booting from the sd, but it was, just that the sd contents were corrupt...
it will boot fine if the sd card is out OR if i format the card and it is empty. if i put a boot image on it nothing. first i thought it was the sd card but now ive tried it with 2 different ones and the image being wrote from 2 different card readers
grrmisfit said:
it will boot fine if the sd card is out OR if i format the card and it is empty. if i put a boot image on it nothing. first i thought it was the sd card but now ive tried it with 2 different ones and the image being wrote from 2 different card readers
Click to expand...
Click to collapse
Try different image writing software or a cheap usb reader.
broke out an old free usb reader i had and installed it in tower and it worked but now im stuck at N logo. ive done boot partition fix i did 1.0 recovery even did hard reset and i let it sit for 4 hrs on the N logo and still nothing.. gonig to try 1.2 here in a min
edit: the 1.2 signed i got from here did the trick
Hi Everyone,
My bootloader shows:
Seucurity Unlock
PD29*** SS-BC (4K)
SPL-1.57.2250.0(113571)
MicroP(LED) 0X07
TOUCH S1(V1.8,#1624)
SD UNKNOWN 2
Partition Info-v211v413
Serial
The problem here is the SD cannot be recognized but i can still flash any ROM without problems, but after flashing deepshining 7.77, my phone got boot loop around 4 -5 times then appeared a message SD card is not compatible,..... and must choose turn off.
Just flashed back to the original ROM, and the problem still persists. Any suggestions or solutions should be greatly appreciate.
Tks in advance.
I replaced for another brand new SD card and no boot loop more. Everything go smoothly, but SD card Unknown still on the tri-color sreen. I checked so many pages on google but it seems noone got the thing like me. Any advice pls???
It seems noone ever get this problem b4. My htc hd7 is now repeating boot loops and still says sd card is changed, not compatible, .... turn off????????? Any help pls???
i have the sam eproblem frequent reboot and getting storage card not working eeror, but phone has not problem recognising the card and phone can sometimes boot to homescreen just that afeter turning on stuff such as wifi and 3g it reboots and works a while again to reboot...
this happened on the 7.8 custom roms ....
vosathanh said:
It seems noone ever get this problem b4. My htc hd7 is now repeating boot loops and still says sd card is changed, not compatible, .... turn off????????? Any help pls???
Click to expand...
Click to collapse
You must change the card reader, it only cost ~$10-$15
Google this:
"OEM HTC HD7 Sim Card and SD Card Reader"
faustolg said:
You must change the card reader, it only cost ~$10-$15
Google this:
"OEM HTC HD7 Sim Card and SD Card Reader"
Click to expand...
Click to collapse
yes thats what i think the problem is about because i had this message storage card not working even though the sim card was not inserted.
by right the problem is not with the sdcard because it is a class 4 approved card. its the reader i think. But i also had errors in wifi not connecting
it is a known fact that HTC uses cheap quality or inferior made parts in their phones.
but how to ensure thats the problem it could be anything including motherboard faulty .
or antenna faulty
best thing is sell the phone for spare parts and get a new one...
Hello,
I have the same problem. Every time I activate the SIM card, my phone restarts after some time. I changed my SD Card up to 32 GB and got reboots und freezes. So i changed back to stock 16 Gb SD card. I flashed it with the Deep shiping ROM v 8 and still get reboots ;( I need really help wit that......
marty83 said:
Hello,
I have the same problem. Every time I activate the SIM card, my phone restarts after some time. I changed my SD Card up to 32 GB and got reboots und freezes. So i changed back to stock 16 Gb SD card. I flashed it with the Deep shiping ROM v 8 and still get reboots ;( I need really help wit that......
Click to expand...
Click to collapse
like stated above, it is the problem of the sdcard and sim card reader, u need to change it .
as the htc phones mainly use sdcard sas storage compared to nand,. they constantly keep working ust like yr pc card reader.. and will get burnt quite easily
If the HTC hd7 says you have an incompatible card, the os will run really slow and not even boot. For 16 GB needs to be class 2 SanDisk. For 32 gbs it should work with all 32gb class 2 and 4 SanDisk micro sds. Can't use cheap micro sds on our phones. And don't forget to format the card holding volume down button to access crc menu.
Sent from my HD7 T9292 using XDA Windows Phone 7 App
Please keep those MYTHS out of the answers
aclegg2011 said:
If the HTC hd7 says you have an incompatible card, the os will run really slow and not even boot. For 16 GB needs to be class 2 SanDisk. For 32 gbs it should work with all 32gb class 2 and 4 SanDisk micro sds. Can't use cheap micro sds on our phones. And don't forget to format the card holding volume down button to access crc menu.
Sent from my HD7 T9292 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
because it's a well documented fact(here on XDA) that the class restriction does not apply anymore, just look how many user are using class 6-10 on their phones, even the 64GB SDXC on different brands not just sandisk.
Keeping a myth alive hurts the collective knowledge, because stops the research... the myths are the answers that ignorance needs to be repeated to keep people ignorant.(no offense intended)
Hello,
I damaged my data partition due to the EMMC bug last month while installing CM10 by Ivendor.
Now I'm trying to use the CM10 RC2 by Ivendor and accompanying patch to use the data partition on the external sdcard, but I can't get my phone to boot properly.
This is what I did:
1) installed CWM 6.0.2.8 from Ivendor post
2) Format a 32 GB external SD with 1 partition FAT32 and a second partition EXT4 of 4GB
3) Installed the newly updated CM10 RC2 from Ivendor (success)
4) Installed the "Patch for EMMC data partition broken devices" from Ivendor (success)
At this point I reboot the device and after the "SAMSUNG" and the "Samsung Galaxy s plus, cyanogenmod" splash screens, I see the the spinning circle with cyanogenmod at the center. But it does not go further.
Please can any good soul tell me what am I doing wrong?
I flashed only files from original Ivendor thread:
http://forum.xda-developers.com/showthread.php?t=2000828
EDIT
I got to the home screen but I get "Damaged SD card" message and phone shuts down
Ok,
after I cleared cache/dalvik cache, fixed permission and reinstalled a few times, I managed to get to the home screen but I get the message SD CARD DAMAGED and it it shuts down.
I'm using a 32GB class 4 card.
I've checked it a few times for errors on the PC. I've reformatted it a few times. I've also tried with another class 4 card. But the result is the same.
I assume class 4 is not good enough.
I bought a new class 10 card but I will get it next week.
Ok,
now I have a brand new Samsung SD Card class 10 but I still get the same message SD CARD DAMAGED few seconds after I get to the home screen and the phone switch off.
Does anybody have any idea why?
are the formattet partitions primary?
Lei M said:
are the formattet partitions primary?
Click to expand...
Click to collapse
Yes, both partition have been formatted as primary.
The brand new SD card is a SAMSUNG class 10 plus UHS-I 32GB. The previous one was Transcend 32GB class 4. And I also tried a Kingstone class 4 2GB.
Anyway I get to the Android home screen for 30 seconds before it checks the SD for errors and shuts down.
Any idea?
hydeh24 said:
Yes, both partition have been formatted as primary.
The brand new SD card is a SAMSUNG class 10 plus UHS-I 32GB. The previous one was Transcend 32GB class 4. And I also tried a Kingstone class 4 2GB.
Anyway I get to the Android home screen for 30 seconds before it checks the SD for errors and shuts down.
Any idea?
Click to expand...
Click to collapse
maybe the problem is not the ext SD but the internal... or the card reader, it's quite impossible that you have 2 "old" sd card damaged and a brand new one damaged too
ktulu84 said:
maybe the problem is not the ext SD but the internal... or the card reader, it's quite impossible that you have 2 "old" sd card damaged and a brand new one damaged too
Click to expand...
Click to collapse
Ok. Please how do I check the internal SD card for errors? Or how can I reformat it to start clean?
I don't know, maybe in recovery?
Sent from my GT-I9001 using xda app-developers app
Ok, I've tried with other external SD cards (working in other phones) and I get always the same result when I try to use them on min: SD CARD DAMAGED.
My issue is probably not related to my external SD card. But I have no clue what could be wrong. Any idea?
I think that it could be your card reader or your internal SD card... You can send to Samsung
Inviato dal mio GT-I9001 con Topatalk 2
I gave up and sent it to service.
Thanks for support anyway.