Related
Interesting problem this, it seems to have just started to happen out of the blue a few days ago.
The problem, in a nutshell, is that whatever I try to do, be it recreate the entries in the Address Book, create a duplicate entry with the same name, use the O2 Plus feature which lets you save a contact to your address book and make a new entry like that... Whatever I do, whenever I receive a new text message, the person's name isn't shown as the sender, just their mobile number in international format.
Even if I have that contact in my phone already, with their number in the same format as is shown on the text message (+447...), their name doesn't show at all. It's really starting to annoy me, as I've not added or removed anything to my XDA and yet this problem isn't going away.
Argh! Anybody have any ideas as to what's wrong? I might ring O2's oddly-named Data Support and quiz them about this tomorrow, too...
Cheers again everyone,
Christopher
When you search the forum for "CallerID" you'll find a few people asking about the same problem, mainly when receiving calls however not SMS' and some suggestions.
Do you have photos attached to your contacts? I'd try reinstalling the CallerID_Alpine_... from your Extended_Rom, if all fails it might be easiest to restore a backup (if you got one that is).
hth,
Max
I did some further testing today, borrowed a mate's phone and rang mine... Bizarre, the first time my phone was rung, it would take approx. 30 seconds for the name of the caller to show, the number showed up fine though. Subsequent dials would result in the name showing up almost instantly (as usual)...
.... Veeeeeeery odd. I'll just dash off and try reinstalling this CallerID cab...
Hey all,
I've had my Kaiser a while now, and I love it to pieces. However...
When I open my SMS/MMS inbox, I see all my texts, but instead of showing the Name of the person who sent me a message, it shows there number (i.e +447870111111). This happens if I haven't pre-saved the contact to my phone (Even though the contacts were saved on my simcard). What's more, I thought copying all the contacts from my SIM to my phone would work, but no look. And now, I have 2 sets of all numbers! (one on SIM and one on Phone).
So My questions are:
Is there a way to have my SMS inbox show the contacts name, rather than number?
Is there a way to tell the Kaiser to hide my Sim Contacts, and just display my phone contacts.
I've searched and searched for these issues, but cannot find anything. I'm fairly technical so am usually good with these type of things. But any help would be appreciated.
Cheers
Scott
for the second question, use kaiser-tweak ...
there's a option under [contacts] where you can disable sim-contacts.
the other question i can't help, sry
bye andré
OK Cheers Edi, Anybody for question number one? Surely this issue affects others?
Just to confirm I'm not a jinx, can somebody else who experiences this issu please post?
bump.......
When you store a contact after receiving an SMS, the SMS database is not updated with the contact info and so the Inbox will show with the number alone! But after storing it once, the next SMS will be named with the Contact. This is how it happens in Windows Mobile or the way it handles the messages. The updating is not done in all SMS after a contact is stored as it would slow down the device.
Regards,
Carty..
Thanks for that Carty, now i know I'm not going insane!
It's a shame it has to be that way though... Standard mobile phones usually update themselves when you've saved the number as a contact. Ah well, I still have the best phone ever!
Cheers
Experiencing The Same Problem
Try to include the country code and for sure you'll have the name appear. Problem will be, when that person is calling from the same country... Country code will be omited. So you wouldn't see the name of the person who's calling... and vise versa
Did you find any solution?
Thanks,
Angelo
Audio said:
Hey all,
I've had my Kaiser a while now, and I love it to pieces. However...
When I open my SMS/MMS inbox, I see all my texts, but instead of showing the Name of the person who sent me a message, it shows there number (i.e +447870111111). This happens if I haven't pre-saved the contact to my phone (Even though the contacts were saved on my simcard). What's more, I thought copying all the contacts from my SIM to my phone would work, but no look. And now, I have 2 sets of all numbers! (one on SIM and one on Phone).
So My questions are:
Is there a way to have my SMS inbox show the contacts name, rather than number?
Is there a way to tell the Kaiser to hide my Sim Contacts, and just display my phone contacts.
I've searched and searched for these issues, but cannot find anything. I'm fairly technical so am usually good with these type of things. But any help would be appreciated.
Cheers
Scott
Click to expand...
Click to collapse
Apologies
I'm sorry. I guess my problem is different...
Audio said:
Thanks for that Carty, now i know I'm not going insane!
It's a shame it has to be that way though... Standard mobile phones usually update themselves when you've saved the number as a contact. Ah well, I still have the best phone ever!
Cheers
Click to expand...
Click to collapse
Wow this thread's a blast from the past
TBH I've not noticed the problem again, which could mean one of two things:
1) The problem has now gone after Flashing a WM6.1 ROM, or
2) I haven't had any "New" people send me a text.
Sorry I can't be of more help...
Hi,
I haven't had an issue with numbers showing on an SMS instead of names (as I store my numbers as +447976123456, but I did have a REALLY annoying issue with SMS delivery reports having the number instead of the name.
This would have been fine if I sent one text every now and then , but as a heavy texter it drove me nuts - never knowing whos message had been delivered.
Just in case anyone else is having trouble with this - try the attached file - it lets you change the format of the report you get when your SMS is delivered!
Cheers
Zippyioa
I got my Diamond last Thursday and have been using it with my secondary sim whilst I got used to the phone and became used to using it intuitively... I am happy to say I am now completely comfortable with it and it is *almost* perfect!
Changes:
*Bepe 0.97 FIXED
*Diamond Advance Config tool
*S2U2
*Comm Manager advance.
Thank you to all the great people working to made this device all it should be! Donations forthcoming very soon!
I have just a few questions with regard to my remaining issues:
*The contacts summary page which comes up after ending a call, any way to suppress that?
*Is there any way to bluetooth contacts, files (pictures/music etc) to and from another mobile phone? I tried transferring a jpg image, an MP3 ringtone and a contact via bluetooth from a Sony Ericsson W880i but all three failed!
*Is there any way to display contacts as FORENAME SURNAME as opposed to SURNAME, FORENAME?
Thank you in advance for any advice regarding the above
Anyone?????
Think I might be able to help you out there.
1. To get rid of that contacts thing at the end of a call, tap Phone on the Home screen, then tap Menu and then Options. Go to the Advanced tab right at the end and untick "Add new phone number to Contacts at end of call".
2. To receive files of any kind over bluetooth, you have to have Bluetooth turned on in the Comm Manager, but you also need to have the Beam option turned on. If you have the modified Comm manager then you should be able to see the Beam option in there.
3. All my contacts show up as "forename surname" already, I think it might be to do with how you have it set up in Outlook, because I remember Outlook had it "surname, forename" by default and that drove me mad until I changed it. Hunt around in Outlook to change the way they're displayed, then do a sync, and I'd say that should do it.
Dave
Thanks for taking the time to reply Dave!
The contact summary still seems to come up I did untick this box a few days ago and maybe its a bug but the screen still appears on finishing a call.
I turned on Beam and the bluetooth file transfer now works just fine, thank you!
I will sync up when I get home and have a play around with Outlook, thanks for the suggestion I think that will remedy this problem too.
Is there an advanced contact manager or SMS manager out there by chance? Sending and receiving a few SMS today and the whole transition from TF3d to the WM is a bit jarry, and browsing contacts isnt really possible without the stylus... so far these are the only small niggles in day to day use! The latest version of S2U2 really helps usability and allows you to lock the hardware buttons when you get an incoming call... no more calls answered by mistake with this app!
No bother.
I never manually browse the contacts list because it scrolls very strangely, its impossible to successfully pick a contact.
The best way to select a contact when sending a text, I've found, is to type the first letter or two of their name, eg "DA" and then everyone with a name starting with DA is listed, eg DAD, DAVE etc. Much better than scrolling a list. Its the same behaviour when making a call and you want to select a contact; just bring up the Phone app (the one with the keypad) and start typing their name on the number pad.
I agree though that the process of moving from TF3D to WM6 when sending a text is very clunky. I wonder would HTC consider developing their own TouchFlo messaging software that covers all aspects of sending SMS and email. Unfortunately the iPhone still has the advantage there; you still have to get out the stylus every now and then on the Diamond.
I have most of my most frequently used numbers under the People tab in TF3D... good suggestions as above though.
May give this a try if I cant get along with the SMS...
http://store.xda-developers.com/xproduct.php?xProd=1943
Will have a search to see user opinions
Hello,
I have search extensively with various keywords both in the top-level forums as well as Google and I cannot find a solution to this problem. Actually, I have only found one other person on another board who has even mentioned it (no replies yet) so I wanted to ask here.
I have an at&t Fuze and when I compose a message and type in a recipient name and select "Check Names" from the menu, it gives me a list of names and when I select one, it fills in the field correctly and then immediately crashes.
I have tried various cooked ROMs as well as the stock at&t ROM with them all producing the same results. Currently I am running Monx's ROMeOS 1.40.1 (which smokes BTW!) and I have tried every possible setting I can think of (including Adv. Config) to no avail. There are no other issues with the phone other than this. Could this be a HW issue? It might be a stretch considering the symptoms but I am willing to believe anything at this point...
Please Help!
Just found this thread - Im having the SAME issue... Im surprised that nobody else has the issue or that nobody else uses Check Names...
perhaps its a corrupt contact entry. Have you tried deleting and recreating it? Or is it happening for all contact entries?
Good thought - but unfortunately its happening for good contacts. Even NEW contacts. Occasionally it will find the contact, put the name in, then close out or when it cant find a contact, it will just close out. Furthermore, its only happening for e-mail message types. MMS/SMS the checknames function works fine...
I had the same problem with one of the latest ROMeOS 1.80.* versions.
Currently I don't have the problem with 1.95.1
If I remember right, if you start with adding the receipient it works, but if you first type your text message, and then add a contact, it will crash.
1.95.1 eh? Ill have to give it a go.
Mine will crash regardless of whether text is in the field first or not, i've tried both ways and have the same results.
In narrowing down the problem to add-on applications, did you have Xpress mail installed? or any other e-mail forwarding service? Im wondering if that has anything to do with it...
i've had the same issue as well.... but it's wierd..
if the contact is a personal contact, it works fine. if it has to search my business contacts (ota activesync/exchange 2007) it will crash.
@b_slice
No, don't have Xpress mail installed.
@godashram
I don't use business contacts.
Well, that helps to eliminate potential culprits.
godashram - Mine will crash regardless of contact type, business or personal
Just a +1 from me as well.
I'm using a HTC Diamond with the stock HTC 2.03 ROM. SMS crashes and goes back to Manila when using the 'check names' function.
It happens all the time: It doesn't matter which contact I try and it also doesn't matter if I've typed in a text message or not.
Programs running in the background are: Touchlockpro and Manila.
I hope someone can come up with the cause and the solution for this.
This seems to be an inherent bug in the Stock ROM. I've uploaded 4 to 5 ROMs from different chef's and NONE of them have this same issue.
Im currently rocking the Energy 3.0 WM 6.5 and contact searching and check names is working FLAWLESSLY.
hi, i have a texting problem.
any text message that i receive only shows the mobile no +447 etc and not the contacts name that on the phone.
the contact is saved on the sim card. is there any cab file or applcation will will solve this???
i have the vario IV in UK tmobile
regards
mistrymit said:
hi, i have a texting problem.
any text message that i receive only shows the mobile no +447 etc and not the contacts name that on the phone.
the contact is saved on the sim card. is there any cab file or applcation will will solve this???
i have the vario IV in UK tmobile
regards
Click to expand...
Click to collapse
you need to remove the contacts from the simi card and onto the device then you will be able too..please search this has also been asked alot
thats not true because this happens to me and all my contacts are on the phone..
and i still get numbers instead of their names.
and no this isnt an issue because ive searched and searched and searched
how do you fix...
at&t Fuze US
zachthemaster said:
thats not true because this happens to me and all my contacts are on the phone..
and i still get numbers instead of their names.
and no this isnt an issue because ive searched and searched and searched
how do you fix...
at&t Fuze US
Click to expand...
Click to collapse
Did you do some type of back up? Using what? What Rom are you using? Under Diamond Tweak and/or advanaced Config click on hide sim contacts.
texting
hi,
i have already cleared the sim and contacts and then gone on to enter back on to contacts, it still doesnt work.
i have had my phone for a week now.
maybe tmobile will eventually update this on the next rom update if possible?
but is there not an application to sort this out that i could get hold off?
slawcop` said:
Did you do some type of back up? Using what? What Rom are you using? Under Diamond Tweak and/or advanaced Config click on hide sim contacts.
Click to expand...
Click to collapse
yea i use Sprite Backup 6.5.4 but i hardly think thats the problem..
ill try the diamconfig method and see
UPDATE: IT WORKS!!
how'd you know?
thats so weird too because i have no contacts on my sim..
right on man thanks
Actually I have a similar issue.
Stock T-Mobile MDA Vario IV
All contacts saved to phone memory, in the 07 format.
Incomming calls show the callers name if in contact list, all text messages show +447 number instead of 07 number and no name.
If contact is changed to +447 then texts show contact name, but incoming calls only show number :S
Any Ideas on a resolution?
I had the same problem after I installed the official HTC ROM update that was released mid Feb. I noticed that for my contact numbers here in the US, if the number didn't have a 1 before the contact's number, it would not recognize the number in my contact list. after i went thru all my contacts (a MAJOR PAIN IN THE A$$) and added the 1 before all the numbers, all my contacts' names appear again. not sure if that helps...
there with you guys. also on tmobile stock rom.
all my contacts are in outlook. ( not sure if that is on phone or mem card.)
but texts come thru with +44 and my phone doesnt recognise them. i am currently haveing to save the new numbers but when i sync on my pc. it reverts to the old ones coz i sync pc to phone.
seems to be generically vbe a tmobile vario 4 issue.
I have the same problem and I'm on Orange but I decided to try the NEW SWIFTBL WWE DIAMOND ROM V7.5 so this might be causing the same problem.
I am going to try the newer update from Orange to see if that will work.
Mines has been showing "unknown caller" along with the telephone number when I call my mobile from my home phone and the messages are just showing up with the number.
This problem has been bugging me from the last few months but I didnt realize that there may be a solution to this until I seen the amount of posts for tweaks on here.
I am nearly fed up with the phone...I just began enjoying this new ROM that I put on it coz my last Orange one was apparently an old one.
Will let you all know how it goes.
matrix_sid said:
I have the same problem and I'm on Orange but I decided to try the NEW SWIFTBL WWE DIAMOND ROM V7.5 so this might be causing the same problem.
I am going to try the newer update from Orange to see if that will work.
Mines has been showing "unknown caller" along with the telephone number when I call my mobile from my home phone and the messages are just showing up with the number.
This problem has been bugging me from the last few months but I didnt realize that there may be a solution to this until I seen the amount of posts for tweaks on here.
I am nearly fed up with the phone...I just began enjoying this new ROM that I put on it coz my last Orange one was apparently an old one.
Will let you all know how it goes.
Click to expand...
Click to collapse
Just to let you all know that I updated with WM6.1 WWE CE OS 20764, Build 20764.1.4.3, V2.6 Full, UC Ready ROM and it seems to have worked a treat...all my numbers are showing names now and I have a much faster phone with additional positive tweaks.
It has a slider on screen on it too that you must slide to the left to answer or right to ignore...this ensures that it will not mistakenly get answered in the pocket.
Highly Recommended!
All Credit Goes to swtos and you can find the link for the lite and full versions here.
Peace.
been a while since i ran into this...
But I do believe there's a registry setting that is used to determine how many trailing numbers are used to identify contacts.. if you drop it by a number or 2 it should still work, and may solve that '1' not being there..
wish I could remember where I saw this registry setting...
Anyway, I don't really run into this issue, but I'm using ROMeOS... and all my numbers I went through and manually edited on my exchange account to always be in the (xxx) xxx-xxxx format, including formatting. Every number shows fine -- But I also have no SIM contacts (with exchange backup and spare phones with backups I don't see the need, it just seems to confuse things)
now showing all contaacts
i finally resolved this and posting back on the thread i read bb lee post.
that is what i did.
if you do advanced config there is an option use X number of trailing numbers to identify numbers i have set this to 10 this will then recognise regardless of +44 or 0.
anyone else try this and let me know if it resolves yours too.
mahender