ok i am trying to flash the latest JM2 i was on JF3 ...
i am using odin with 512 .pit..
the problem is that odin is stuck on file analysis...
I am using windows 7..
I tried connecting it to other port....
Also cleared the drivers and installed it again...
Please help
Just interested - what compelled you to make a new topic, instead of just asking in jm2 topic?
tick "re-partition" and try again with PIT 512, if that won't work, try "re-partition" with 513. Check that everything else is as should, from thousand guides on this board.
/end thread
Related
Guys,
Does anyone have file 513.pit, Ineet it to flash DXJF4 firmware to my phone. It's bricked now....and already tried to wipe factory settings but it fails.
I already downloaded the DXJF4 firmware, but I still need 513.pit. please help...
Think this is it > http://www.multiupload.com/4N0NMBO0WE
stluciasound said:
Guys,
Does anyone have file 513.pit, Ineet it to flash DXJF4 firmware to my phone. It's bricked now....and already tried to wipe factory settings but it fails.
I already downloaded the DXJF4 firmware, but I still need 513.pit. please help...
Click to expand...
Click to collapse
Here is:
http://rapidshare.com/files/415962748/s1_odin_20100513.pit
You guys are god! thx!
what is the diffrence between 512 anf 513 pit files.. I flashed JP3 with 512 was I correct or should I have used 513
if its working then dont worry m8
if you use the same pit file all the time you dont hav to repartition when you change pit file you repartition
regards
Just use 512 for everything.. 513 doesn't seem to work for late builds
513 doesn't work, but it's still good to have around.
I wanted to flash JM1 and, for some reason, odin wasn't flashing it, no matter what. I tried ticking the "re-partition" option (with 512.pit) and odin was just waiting there, never actually re-partitioning the phone.
So I flashed the firmware with 513.pit (which obviously didn't work, but odin re-partitioned). Then, I re-flashed with 512.pit this time and odin re-partitioned it properly.
Always good to have alternatives laying around.
Hi guys i searched for other threds before making this one but none of them had download mode working
i tried flashing jpy and jpx with odin using the 512 and the 813 pit files, my problem is that after showing the sgs screen(really effing loud) the screen goes dark and vibrates in a pattern that goes like ........1....2................1...2...........1............2 and repeats, i can accces both the download and recovery modes
Extra maybe important info:
came eclair jm4 flashed with kies then from jm7 i think with the bujp5 modem(the vodafone one) tried to flash jpy & jpx still stuck on darkscreen
in odin i only had the pit+pda checked with repartition, autoreboot and f.reset time ticked. Did i miss something?
I also tried to flash jpo, no dice.
Try to flash an other firmware (2.1)
Take it from samfirmware
They supply 3in1 packages that need to be put in only pda
Use pit 512
Repartition
If that worked, then try a 2.2(.1)
______________________________
Send from my shiny gadget!
Cypher_X said:
Try to flash an other firmware (2.1)
Take it from samfirmware
They supply 3in1 packages that need to be put in only pda
Use pit 512
Repartition
If that worked, then try a 2.2(.1)
______________________________
Send from my shiny gadget!
Click to expand...
Click to collapse
As Cypher_X said try 2.1 i always go jm8 never failed me
Ok thanks gonna try with that
Sent from my X10i using XDA App
Ok that worked booted up perfectly fine but....I retried flashing jpy and I keep getting the damm dark screen could the file be corrupted or something? Also don't know if this is normal but after flashing I always get booted up in recovery that didn't happen when on kies again don't know if this is normal
calexus1182 said:
Ok that worked booted up perfectly fine but....I retried flashing jpy and I keep getting the damm dark screen could the file be corrupted or something? Also don't know if this is normal but after flashing I always get booted up in recovery that didn't happen when on kies again don't know if this is normal
Click to expand...
Click to collapse
Where did you get jpy from? I got mine from samfirmware and had no dramas. Went from jm8 to jpy you could always flash a 2e recovery kernel cf root for example then install cwm so you can install custom jpy roms..i use darkys and love it
Got it working : D For any future reference flash jm8 with repartition on then jpy with repartition off...
on another note what do I do when I already have jpy working and want a clean instal of it plus different modem and kernel? (repartition on/off, do I use any pit files ?
Happy new year
can someone please tell me where to get these files from?
i've searched but keep getting the wrong pit or stock firmware..
i'm a noob and i'm confused, excuse me of my ignorance but i've tried sooo much lol
btw i have a bell I9000M which i think is my problem.. help
Help please
I have a Galaxy i9000 (UK) unfortunately like many others I decided to use the latest Kies software it went through the upgrade to froyo 2.21 however I had not removed Ryan lagfix or unrooted the phone first.
Now any efforts to reflash fails at the last stage giving error message "Complete (write) operation failed" and the phone will not reboot
Pit and Re-partition works and states "pass" I have tried everything I know and followed lots of other thread suggestions (probably to make it worse)
Thank you in advance for anyone that has the answer, I am not technical enough to play around with any indepth reprogramming so simple answers please
Do a clean flash with an eclair firmware like JM8 with 512 pit and repartition ticked. After flashing go to recovery and do a factory reset and a cache wipe... Have you tried this?
You can also try to format the internal sdcard if its not working and you have a backup of your data.
Or try jpc it is allways a safe bet (for ex. from samfirmware repartition with pit)
Happened often u can fix it no problem ;-) don't be afraid
Sent from my A101IT using Tapatalk
Thank you
Thank you very much for the JPC suggestion, after a long and painful download 9 I am using a 3G dongle as i am away from home) I managed to firstly flash the Samfirmware.com JPC file using the 803 Pit, using Odin 1.7 and all 3 files, with re-partition ticked - it failed however it did manage to restore the Galaxy start screen
I then unticked re-partition and removed the Pit file and reflashed the 3 files and it finally loaded successfully. after 5 days of trying everything I now have a factory reset phone, hopefully my back ups will work if not I am still really happy so thank you both
JPC update
Good morning guys
I have reconnected to Kies and get the message "this version of the device cannot be updated"
I have just tried to flash I9000XWJS5 without success,
at this stage I should be happy that my phone works again however it would be good to get 2.21 if possible as the standard version lag still drives me crazy
the internal Sd has been reformatted, reset to factory default, wiped user data etc. meesages are either same as before "write fail" or when successful phone wont turn back on.
Do I need a different version for the UK - with O2?
Thanks again in advance
I know you just got over a hairy situation with your phone but I would suggest the Odin and Samfirmware route. I am currently running XWJS5 installed through Odin and it is pretty snappy.
Just be sure not to tick "re-partition", that's what worked for me.
Sent from my GT-I9000 using Tapatalk
thecrucible said:
Just be sure not to tick "re-partition", that's what worked for me.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
thanks for that advice. that did the trick for me. i feel like a fool for not trying that before. lol
ondi problem
i have a réel problem with my galaxy i9000 , the ondi can't détect it.please help.
and when i enter to the recovery mode is orange with lot of unknown.
Hello,
I just wanted to upgrade to XWJS5, so I flashed JPU with 512 pit and re-partition checked (so then after it I flash JS5 with 803 pit and no re-partition)
Now odin is stuck on "Set Partition" stage and my phone doesn't even show any progress, what should I do?
I don't want to brick my phone
Please answer me ASAP, my phone is stuck here now
The USB is still connected... anyone please?
did you definitely uncheck re partition ??? and have you got all 3 files ??
I flashed stock JS5 with 512 pit (even tho samfirmware says 803 pit )
and its worked like a charm,,, dont panic just breathe and relax and try again.
I'm flashing JPU right now not JS5. You know because JS5 has only 1 file if I flash it alone phone wont bootup.
Re-partition is on, pit is 512, firmware is JPU and CSC/Modem files are selected correctly. Will my phone brick if I unplug it or maybe close odin?
IT WILL BRICK but it will just be a soft brick which means you can fix it by flashing another ROM thru odin...
you will be fine just make sure download mode works after u unplug it
and also js5 comes in 3 files now its on here somewhere,,, download that and flash it
So shall I unplug it now or close odin? And after i've unplugged it, should i re-open odin or keep it there and press flash button?
Can you please give me the 3 files JS5 link? I found one but i'm not sure if it's the correct one.
well you cant keep it plugged in forever lol, unplug it, restart odin. make sure kies (if you have it) is closed (even in the icon tray) and download XWJS5 link is below. flash that with PIT and RE-PARTITION and that should fix it
http://forum.xda-developers.com/showthread.php?t=955712
Try this too http://forum.xda-developers.com/showthread.php?t=954377 its a more in-depth instruction guide
Issue solved, thanks alot!
So I've downloaded the following kernels from a link here on XDA that should be swapping kernels to allow me root on my recently upgraded, stock ROGERS 2.3.3 Captivate. Odin is telling me to "Check image files !!" when I load the .tar files into the Select Intergrated Package (and yes, the one package switch is on). I opened the tar to double check it wasn't double-compressed.
What else would be giving me this problem? I'm using Odin 4.28. Curiously, it is showing my phone as detected, my phone IS in downloading mode, but Odin just says (Android) in the Title, no specific model. But it says it's found it on COM 6. <1> Added!! and Detected!!
It's when I load up the kernel tar's and try to start that it yells at me. Is this triggering anything in anyone's mind that I'm doing wrong? Or do I need to provide more info?
I am using Vista 32-bit (legit) on a Dell studioXPS. And I ran it as administrator.
never heard of ODIN 4.28. i think its only up to version 1.82 or so.
sounds like you are using the wrong ODIN
Pirateghost said:
never heard of ODIN 4.28. i think its only up to version 1.82 or so.
sounds like you are using the wrong ODIN
Click to expand...
Click to collapse
Yeah. That is def the wrong version of Odin. Download the i9000 bootloaders in my sig. Unzip it. Delete the pda.tar.md5 file. Use the included version of Odin (1.82 I think) to flash your kernel.
Alright, quick question - I accidentally flashed the phone, not the pda. I tried to flash the KH2 modem back via phone but ODIN failed. Kies is currently not detecting the phone, and so I decided to try flashing the PDA while I had it open and I would figure the modem out after. ODIN hung, so I closed it and rebooted out of downloading mode and got the Phone ! Computer error. So I figure now I have to flash back to the stock rom and start over again, but this time I would like some advice as to which step to take next. I downloaded I896UXKH2-HOMEBINARY.tar.md5 from another thread here. Can I flash this with Odin - and if so, which is the place to load it? Bootloader? PDA? Phone? CSC? I have no PIT files.
Think it goes into the pda slot. Go back to the thread t you got it from and read the first post of the thread. Also restart your computer before trying to flash again.
can someone upload the modem.zip, please thank you