HTC Tytn II not booting past passcode screen - Tilt, TyTN II, MDA Vario III General

I've looked through the forum for a solution to my problem, but to no avail, and it doesn't seem that others have the same exact problem I have.
Here goes..
To start off, my phone got wet, and as it was barely booting and crackling and flashing RLOD came on, I decided to let it dry for ~2 days, and then kept it plugged in for a day.
Now, I have normal green flashing light, the phone boots as quick as it used to, but it lags on the passcode screen (and shows my details as before), before saying that several incorrect passcodes have been entered and I need to type in 'a1b2c3', BUT before I get a chance to do so, the phone vibrates three times and shuts down :S
I have hard resetted the phone, but that didn't do any difference.
Anyone have any idea what's going on, and is there any way for me to able to save it??
Thanks beforehand

Related

AT&T Tilt locked in tri-colored screen! Help!

Yesterday I took my battery out of my phone to remove the dust from inside the phone. When i replaced the battery back into the phone, it booted up into the tri-color screen and has been there ever since. I haven't modified the phone since receiving it from AT&T at all. When i actually noticed the problem I tried to reset the phone through the hole on the bottom of the phone. At first, it booted up normally but was out of batteries since it had been running on a bright screen for a couple of hours. Thus it turned off immediately. I have tried to reset it again but it seems to do nothing. Since then when I put the battery back in and I turn the phone on it returns to the tri-colored screen and it says SERIAL in the bottom white area. When plugged into my computer it says USB in the white area. On the top of the tri colored screen, in the red area, it says:
KAIS1*0
SPL-1.56.0000
CPLD-8
I thought about downloading the newest ROM update from HTC but my phone wont sync with my computer, and the tutorial says it needs to in order to install properly. If anyone could help, please let me know!
Update!
I put the battery back into the phone and it booted up just fine....it was a little slow and worked normally for a couple of minutes. Soon it started to act up. When i plugged the phone into my computer it automatically started to freeze, when i unplugged it from the computer it would work just fine! I then turned my phone off again and now it is back to the tri-color screen again!
try hard-resetting the phone.
To do this, hold down the two soft keys at the front while pushing the stylus into the reset hole. Just make sure to back up any data you want, as it will delete it all (files, contacts, etc.)
Tried a Hard Reset
When I finished it, it just went back to that tri-colored screen. Now the phone will turn on every 10th time i try and work for a couple of minutes. When the screen turns off it wont turn back on when i push the power button. The green light still blinks though.
I have been having this exact same problem for a little while now, any help would be more than appreciated.
EDIT: Everything about the phone was AT&T stock ROM from Oct. '07.
i think it replacement time
hi all once again.i was using my kaiser yesterday then my phone went into tri screen.tried hard reset soft reset.phone reboots in tri screen.im using Duttys Official WM6.1 Rom 5.2.19716 UC.
ihave kais130 mfg /spl 1-0.0lipof /cpld-8 on screen.
if there is a solution to this i would appreciate help in resolving.thanks in advance
Another sad update!
Well as of this second my phone works okay...slower than usual....but in an hour or so the screen will turn off and the phone will stop working, i will take the battery out.....wait about 45 minutes and hope that it boots up normally. No one has any idea why this is happening to multiple people? I have had this phone for maybe 3-4 months. Is the failure rate that broad and fast on these phones???
WTF
This phone is ridiculous. Now if I keep the phone plugged into my computer so the screen wont time off, the phone works just as normal. The moment I unplug the phone from charging it decides to die on me after an hour or so!
this happened to me last nite.
spent hours and hours trying to fix.
ended up reflashing orig att rom..
everything is fine..
proceeded on to a cooked rom and all is well..
added some apps ..
so far -- awesome
Good News!
Magically my phone started syncing with my computer randomly. Thus it allowed me to flash the rom with the original ATT rom and so far my phone is back to normal working great!
tri screen sorted
i bought my kaiser off ebay..i couldnt sort tri screen.i had various roms on at various times .i had no warranty. on pay as you go.decided to take to local o2 shop.got it back today fully working for free.took them 8 days.
Hey, did you have any luck fixing this problem - I've been looking mad for a solution to my tri-screen problem, but no joy...
KAISI*0
SPL-1.93.0000
CPLD-8
appears on my screen.... I don't now how to fix this puppy and it's only a couple of months old...
I started plugging the charger in and soft reset and it would work until i could find a new OS for it, Rom or RUU I think, I am not sure if it works, but now I can't get it off Tri-Screen to run it..
Any help anyone please?
You better take a look here for a solution : http://forum.xda-developers.com/showthread.php?t=423486
jezzaflyboy said:
Hey, did you have any luck fixing this problem - I've been looking mad for a solution to my tri-screen problem, but no joy...
KAISI*0
SPL-1.93.0000
CPLD-8
appears on my screen.... I don't now how to fix this puppy and it's only a couple of months old...
I started plugging the charger in and soft reset and it would work until i could find a new OS for it, Rom or RUU I think, I am not sure if it works, but now I can't get it off Tri-Screen to run it..
Any help anyone please?
Click to expand...
Click to collapse

Diamond don´t turn on

Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
rmorera84 said:
Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
Click to expand...
Click to collapse
what did you do *before* your diamond stopped turning on?? unless you had a completely unpredicted system meltdown of your diamond for injecting it with super high voltage. it is rare for it to not power off unless you did something ... so please elaborate so we can assist better.
Ok, yesterday i use the phone like anothe normal day, in the night i turn off the phone, and in the morning, when i tried to turn on, i have this problem, for example, when a tried to do a soft, hard reset, the screen is in black, when a conect the phone to the usb the screen is black, is, i left the phone alone, in 3 minutes the black screen again, i don´t know why.
any LED activity when plugged into USB?
I think it is a major manufacture problem
I had the same problem, taking out the battery waiting a while and inserting it back, will solve the problem for some time but it will happen again.
Finally I sent it to the HTC support center.
I don't understand why HTC didn't recall.
If you'll search this forum you'll see the same problem in different stages, some times it's a blank screen but the phone will ring and some are just freeze.
Hi, I've had my Diamond for about a month soon and it started earlier this week by not wanting to come on at all. Been taking out the battery for a few days but eventually got fed up and did a hardware reset tonight. Not long after that it just suddenly turned itself off and I couldn't get it back on again. I thought I'd pack it back into the box it came in and send it back tomorrow and took out the sim card. After that it came to life again.
Happened to get a call after that and that call was suddenly disconnected without any reason.
So I am not very happy with this phone at the moment. Would appreciate any advice or if you know for sure it can't be sorted maybe I should send it back and ask for another one?
Blazeitup123 said:
any LED activity when plugged into USB?
Click to expand...
Click to collapse
Nothing, but one time the pc detect the phone, but later nothing.
No Led activity either on mine when it went dead.
When the Phone goes dead, try cooling the phone down as much as possible, and try starting it up again.....
There is a problem with the HTC Diamond in that it can cook itself (excessive heat), due to the auto over temp function crashing and not switching off the phone..... (That's what I have been told at least...)
I know over around 5 Diamonds so far that have had this issue, where the symptoms slowly get worse...
Have a look at this thread....
http://forum.xda-developers.com/showthread.php?p=2905775#post2905775
PLEASE P.M. me if you have any of the symptoms described in the thread...
I have been TRYING to get my Diamond fixed under warranty now for 2 months with little success... And I kinda need to know how wide spread this problem is to proceed any further.
could not turn on after blank screen ...
Hello,
I've had the same issue as rmorera, and after I hard reseted the phone all went o.k.. BUT after I reinstalled part of the small apps I use, the phone started to go off again. So, the problem seems to be in the software ...
I believe the cause might be the SRS WOW which I use. I installed the .cab, then the .reg file provided (ufortunatelly I don't remember from which thread I got the files ...). And shortly after, the phone stopped working. I uninstalled the software, and now it works! Could it be that the SRS WoW did this?
I tried to reinstall the SRS WoW and I found that if enabled for "Internal (Stereo)" instead of "Headphones" it gets my phone shut when the WM blanks the screen. If I select the "Headphones" options the issue seems to disappear.
Still, the SRS WoW damages the volume buttons action, but I think this issue is on another thread ...

Diamond reboot loop w. original ROM

hi there,
this morning, without any interactiom, i heard the vibration of my touch diamond restarting.(with original newest ROM from htc website that ran without any problem for several months). battery was about 80% yesterday evening.
but it wasn´t starting at all. after the HTC animation and the green windows mobile screen, it started again. after restarting for 20 minutes i took out the battery, put it in again and performed a hard reset as stated in the manual.
now, on the "rainbow" screen i get a message like
psoc diam stage_pvt 0x32
then i did the Volume-Up reset, and now i don´t even get the red version information in the lower right screen. as it doesn´t even start i cannot get an active sync connection.
any ideas? is my phone broken? i didn´t do anything special, and i wonder why it rebooted without interaction this morning.
any ideas what i can do?
thanks in advance,
jkersch
Mine started doing this about 2 weeks ago it woke me up in the middle of night while sleeping with its vibrator and start sound.
The only thing I have found is that my little reset button at the pen holder dosent work anymore. To do a hard reset i have to takeout the battery and then put it in, hold the volume key and enter key then power it to get it. Flashed by holding volume down and the power on, it hold for about 10min just enough to get the flash.
I managed to flash it once but it dosent help, it constantly reset at the thouch diamond screen. Some times i get to the green windows mobile screen.
As warrenty is out on my phone and ive given up and using another phone.
Same problem in a different thread
Have a look at http://forum.xda-developers.com/showthread.php?p=5279740.
install a new radio worked for me

[Q] Help!!! Grainy green screen With lines during boot up

It started about 30mins ago, was on a call which the screen locks off when u on a call like stand by, but when ending the call the screen would turn on back no matter what. anyways i took out the battery thinking maybe the roms just buggy or the battery dead since it was on low. puttin back the battery the phone wouldnt turn on, took it out and tried again same result.
so i put it on charged nothing, gave it about 2mins charge it came on, but the boot screen with the X just had some green pixel dots all over and horizontal lines for about 3 secs then back to normal, but the phone wont boot pass that.
took out the batteries again, back in then try boot into fastboot or bootloader but nothing, just the boot screen, then the rom booted after waiting, took longer than normal. so i turned it off and try the bootloader or fastboot but it wont load just the rom, so i restarted to recovery mode from the rom it worked, turn off and try bootloader or fastloader mode they worked, now it seems all working fine, also my touchscreen is responding perfectly and the rom loading ok.
but anytime i boot the phone the bootscreen has the green pixels and lines just the same. im abit worried as i dont want things getting worse, is there anyway to fix this, is it some virus? could i just flush everything and start over???
any help would be greatful, thanks.
ppl with simular problem:
http://forum.xda-developers.com/showthread.php?t=642761
http://www.google.com/support/forum/p/android/thread?tid=77fefa8bdd57d7a3&hl=en
You guys think updating my radio from 4.06 to probably 5.08?
Almost similar with few different colors but I dropped my n1. It took me almost a day to see that the LCD was broken. Turn off the phone or screen and look in sunlight. They really were hard to notice and I showed to 4 different peoples whom all failed to notice until I showed them. Hope yours is just a minor software problem.
well i just check its not broken and it didnt fall from me so im guessing its software but im wondering if it can fix but i dont wanna flash my phone and things get worse or even brick my phone, so im asking before i try anything more.

[Q] HD7 vibrates 7 times, gold card fails

Hi Guys,
I bought an HD7 from UK with a broken screen. Just installed the screen, and tried to switch on the phone for the first time. It was stuck on the HTC logo. So I pulled the battery out, and tried to reboot, but now it vibrates 7 times and does nothing more.
BTW. I made it to boot into bootloader, and it shows the attached screen.
I tried to flash a stock NoDo rom with GoldCard, but it fails at the first step, saying:
"Radio.nbh - FAILED"
I've used the GoldCard on two other HD7s in the past, so I guess the problem lies elsewhere. Now I try to download an other original O2 UK rom, and see it it makes any differen or not.
Any clue about what could cause this? And how to resolve the problem?
Any clue about this problem?
A bit of update about this. Put the phone in a bag and put it into the freezer for an hour. After I switched the phone on, and it WORKED! Loaded up the OS, checked my emails and so on, but after around 5 mins (when it warmed up) it shut itself down, rebooted and vibrated 7 times again...
So it's a heat issue.
Also noticed that if I leave the phone for a while It loads up into bootloader, does what I want, but the more I use the worse it gets. First it freezes, then won't even switch on.
Is it a CPU failiure?
VTS_Tibi said:
A bit of update about this. Put the phone in a bag and put it into the freezer for an hour. After I switched the phone on, and it WORKED! Loaded up the OS, checked my emails and so on, but after around 5 mins (when it warmed up) it shut itself down, rebooted and vibrated 7 times again...
So it's a heat issue.
Also noticed that if I leave the phone for a while It loads up into bootloader, does what I want, but the more I use the worse it gets. First it freezes, then won't even switch on.
Is it a CPU failiure?
Click to expand...
Click to collapse
Maybe it is a bad assembly, why don't you reassemble the phone, all points to that... this happened after the disassembly, right?

Categories

Resources